ADS1250U - 20-Bit, 25 kSPS Sigma-Delta ADC | Texas Instruments
MPN: ADS1250U ✓ چالاکADS1250U گشتی
An analog-to-digital converter converts an analog input voltage into a digital value suitable for measurement, control, and signal-processing systems. The ADS1250U belongs to the delta-sigma ADC hierarchy within data-converter ICs. Its delta-sigma architecture is intended for precision measurement applications requiring wide dynamic range, high resolution, and effective conversion rates up to 25 kSPS without missing output codes under the stated operating conditions.
The primary performance features are 20-bit nominal resolution, 18-bit effective resolution, and 2.8 ppm RMS noise at conversion rates up to 25 kSPS. The device supports one analog input and provides a broad dynamic range for precision acquisition systems. Its single +5 V supply requirement simplifies system-level power planning compared with converters that require separate analog and digital rails.
The converter combines an input stage, delta-sigma modulator, digital filter, and serial data interface within one integrated circuit. Digital filtering suppresses out-of-band noise and shapes the frequency response, while the serial interface reduces the number of signal connections required compared with a parallel ADC. Conversion rate, data readiness, and operating mode are managed through the device interface, allowing the acquisition system to balance measurement speed against resolution and filtering requirements.
Typical uses include precision industrial instrumentation, pressure and load-cell measurement, low-level sensor acquisition, laboratory data logging, and embedded measurement systems. It is especially appropriate when 20-bit conversion resolution is useful but a high-speed SAR ADC is unnecessary. The 25 kSPS ceiling also allows the converter to handle slowly changing sensor outputs and multiplexed analog channels when the required settling time permits.
A critical design consideration is analog signal conditioning. The ADC performance depends on a low-noise reference, properly decoupled supply rails, controlled grounding, and an input source capable of driving the selected conversion rate. Follow the pin-description and application-circuit tables in the manufacturer datasheet when assigning tracks, selecting bypass capacitors, and establishing the digital interface.
This page combines the Texas Instruments product characteristics, package information, sourcing context, and practical selection guidance. It also distinguishes true same-footprint alternatives from broader ADC options so engineers can identify when a board-level replacement is technically defensible.
جێگرەوەکانی جێگۆڕکێ بۆ ADS1250U — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADS1250U (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Effective Resolution, Package, RMS Noise, Resolution, Supply Voltage.
ADS1250UG4
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ADS1250U زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Converter Type | Delta-sigma analog-to-digital converter |
| وردی | 20 bit |
| Effective Resolution | 18 bit |
| Input Channels | 1 channel |
| Maximum Sampling Rate | 25 kSPS |
| RMS Noise | 2.8 ppm RMS |
| ڤۆڵتیەی دابینکردن | +5 V |
| No-Missing-Code Performance | 20 bit |
| Serial Interface | SPI |
| پاکێج | 16-pin SOIC (DW) |
| Package Type | SOIC |
| جۆری دامەزراندن | Surface mount |
| Carrier Format | Tape and reel |
ڕێنمایی ڕێکخستنی پینی ADS1250U soic
ڕێکخستنی پین بۆ ADS1250U (پاکێجی soic). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADS1250U.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
ADS1250U گونجاوە بۆ 6 بەکارھێنانs: Precision Industrial Sensor Instrumentation, Pressure and Load-Cell Measurement, Laboratory Data Logging, Low-Level Process Control, Environmental Monitoring, Embedded Precision Measurement.
Precision Industrial Sensor Instrumentation
The ADS1250U fits industrial sensor instrumentation that measures slowly changing or modest-bandwidth analog signals with high resolution. Its 20-bit nominal resolution, 18-bit effective resolution, and 2.8 ppm RMS noise provide more numerical range than a conventional lower-resolution acquisition IC, while the 25 kSPS maximum rate accommodates pressure, force, temperature, and process-control channels. The single +5 V supply simplifies system power design, although the selected transmitter, reference, and analog input network must keep noise and common-mode excursions within the converter's electrical limits.
پێشنیارکراو
Pressure and Load-Cell Measurement
The ADS1250U is well matched to pressure and load-cell acquisition bridges because the converter offers 20-bit nominal resolution and 2.8 ppm RMS noise while operating at rates up to 25 kSPS. These systems typically require excitation, differential sensing, filtering, and careful reference routing rather than high-frequency sampling. Place the bridge and analog-conditioning circuitry close to the ADC, keep the reference node quiet, and use the manufacturer's application guidance to establish gain, common-mode range, and digital-filter settings.
پێشنیارکراو
Laboratory Data Logging
The ADS1250U supports laboratory data-logging systems that prioritize resolution and measurement stability over very high sample rates. A 25 kSPS maximum conversion rate is adequate for many temperature, humidity, pressure, potentiometric, and slowly changing laboratory channels. Its 20-bit nominal and 18-bit effective resolution can preserve small signal variations, while the SPI interface allows captured values to be transferred to a host controller. A low-noise reference, shielded analog routing, and calibrated input path are necessary to translate converter resolution into useful measurement accuracy.
پێشنیارکراو
Low-Level Process Control
The ADS1250U can serve as the measurement element in low-level process-control loops where valve position, flow, pressure, or environmental variables produce small analog voltage changes. The converter's 20-bit resolution and 18-bit effective resolution improve visibility into signals that would occupy only a limited code range on a lower-resolution converter. Its 25 kSPS ceiling is suitable for many thermal or fluid processes, and its single +5 V operation reduces supply complexity. Control-loop timing must still include digital-filter latency and sensor-response time.
پێشنیارکراو
Environmental Monitoring
The ADS1250U is appropriate for environmental monitoring stations measuring air quality, soil conditions, liquid level, or other transducers with limited bandwidth. Its resolution allows small sensor variations to remain visible after digitisation, while 25 kSPS is more than adequate for many slowly changing environmental signals. Use a protected analog front end when the converter is exposed to moisture, surge, or long cable runs. Digital filtering and averaging can improve field performance, but they must be balanced against the required monitoring update rate.
پێشنیارکراو
Embedded Precision Measurement
The ADS1250U fits embedded instruments that require higher measurement resolution without the complexity of a high-speed data-acquisition converter. A host processor can configure the serial interface, monitor conversion timing, and process readings from pressure, potentiometric, or resistance-based sensors. The single +5 V supply and 16-pin SOIC (DW) package support compact board construction, while the 25 kSPS ceiling covers slow control and monitoring loops. Validate reference accuracy, input settling, filter latency, and enclosure grounding before treating digital readings as traceable measurements.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ ADS1250U — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | ADS1250UG4 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | SOIC-16 (DW) | SOIC-16 (DW) |
| Resolution | 20 bit | 20 bit |
| Effective Resolution | 18 bit | 18 bit |
| Maximum Sampling Rate | 25 kSPS | 25 kSPS |
| Input Channels | 1 channel | 1 channel |
| Converter Architecture | Delta-sigma | Delta-sigma |
| Supply Requirement | Single +5 V | Single +5 V |
| Serial Interface | SPI | SPI |
جیاکەرەوە سەرەکییەکان
- Higher nominal resolution than general-purpose lower-resolution acquisition converters (بەراورد بەMCP3424-E/SL)
- Higher maximum conversion rate than the 12-bit MCP3424 acquisition family (بەراورد بەMCP3424-E/SL)
- Direct same-family drop-in option with identical core resolution and speed (بەراورد بەADS1250UG4)
تێبینییەکانی دیزاین
Keep the analog input, reference, and ground paths short and isolated from high-current digital switching returns. Place input filtering and bypass components close to their associated ADS1250U pins, and route the serial interface away from sensitive analog nodes. For sensor bridges, use a quiet reference source and maintain the recommended grounding topology shown in the manufacturer application circuits.
Decouple the single +5 V supply at the ADS1250U pins with the capacitance and ESR requirements specified by Texas Instruments. Verify that the reference source can settle within the selected conversion period and does not contribute noise comparable to the 2.8 ppm RMS converter noise target. If analog and digital supply branches are separated, keep their ground connection consistent with the manufacturer's recommended layout.
Do not assume that the 25 kSPS maximum rate is the rate of useful settled sensor data. External multiplexers, amplifier settling, digital-filter latency, and data-transfer overhead can reduce effective throughput. Use the ADS1250U data-ready and timing behavior from the datasheet, and allow the complete acquisition chain to settle before treating a conversion as valid.
The serial clock and data lines should have controlled impedance, short branches, and ground references that remain quiet during conversion readout. Avoid routing them beside high-impedance analog inputs or reference traces. If the controller and ADC are separated by more than a short board distance, evaluate buffering and the maximum supported interface rate before finalizing the interconnect.
زانیاری پابەندبوون
The verified product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because the ADS1250U is an industrial and commercial data-converter IC rather than an automotive-qualified device.