ADS574KP - 12-Bit SAR ADC, 25 us | Texas Instruments
MPN: ADS574KP ✓ چالاکADS574KP گشتی
An ADC is a mixed-signal semiconductor that converts an analog voltage into a digital value for processing, measurement, or control. The ADS574KP belongs to the successive-approximation ADC family, commonly abbreviated SAR ADC. Its capacitor-drain array samples the input before conversion, while the integrated microprocessor-compatible interface provides digital results to a microprocessor or other digital controller.
The primary features include 12-bit resolution, a single analog input, internal sample-and-hold operation, and operation from a single +5 V supply. The 25 us maximum acquisition and conversion time makes the converter suitable for control loops, industrial measurement systems, data acquisition, and legacy microprocessor interfaces. The integrated reference and clock reduce external component count while supporting repeatable standalone conversion.
The ADS574 uses a low-power CMOS implementation and an innovative charge-drain capacitor array. Internal sampling eliminates the external sample-and-hold amplifier normally required by many older 12-bit converters. It is also described as a drop-in replacement for ADC574 models in most applications, making it useful when modernizing an existing design while retaining the established pin arrangement and interface behavior.
Typical uses include industrial process monitoring, instrumentation, laboratory data acquisition, embedded control, and microprocessor-based measurement equipment. Its single +5 V supply requirement simplifies system partitioning when the surrounding processor already operates from a compatible rail. The 12-bit result provides 4096 digital codes across the converter's analog input range.
When laying out the circuit, place the analog input and reference connections away from high-current digital switching paths. Maintain short, stable traces around the sampling network and use suitable bypass capacitance at the supply pins. Because this is an older through-hole device, its 28-PDIP format offers straightforward assembly and inspection but occupies considerably more board area than a modern surface-mount ADC.
This product page combines the manufacturer datasheet information with package-level guidance, application analysis, and a focused comparison of same-footprint family variants. It helps engineers distinguish the base ADS574KP ordering code from related ADS574 devices while retaining the requirement for pin-compatible, electrically comparable replacements.
جێگرەوەکانی جێگۆڕکێ بۆ ADS574KP — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADS574KP (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە RoHS Status, Data Interface, Package / Case, Resolution, ADC Architecture.
ADS574KP-2
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADS574JPG4
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADS574KPG4
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADS574KP زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| وردی | 12 bit |
| Converter Type | Successive-approximation ADC |
| Architecture | SAR ADC |
| Number of Inputs | 1 input |
| Maximum Acquisition and Conversion Time | 25 us |
| ڤۆڵتیەی دابینکردن | +5 V |
| Process Technology | Low-power CMOS |
| پاکێج | 28-PDIP |
| ژمارەی پین | 28 pins |
| جۆری دامەزراندن | Through-hole |
| Sample-and-Hold | Internal sampling |
| Internal Reference | Included |
| Internal Clock | Included |
| Microprocessor Interface | Included, microprocessor-compatible |
| Input Type | Single-ended analog input |
| Digital Output Codes | 4096 codes |
| ADC574 Compatibility | Drop-in replacement in most applications |
ڕێنمایی ڕێکخستنی پینی ADS574KP 28-pdip
ڕێکخستنی پین بۆ ADS574KP (پاکێجی 28-pdip). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADS574KP.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
ADS574KP گونجاوە بۆ 6 بەکارھێنانs: Industrial Process Measurement, Microprocessor-Based Data Acquisition, Laboratory Instrumentation, Embedded Control Systems, Audio Measurement and Monitoring, Legacy Equipment Repair and Retrofit.
Industrial Process Measurement
The ADS574KP is suitable for acquiring a single analog process variable in industrial monitoring and control systems. Its 12-bit resolution provides 4096 digital codes, while the 25 us maximum acquisition and conversion time is fast enough for many supervisory control loops. Internal sampling removes the external sample-and-hold stage that would otherwise complicate the analog front end. Place the converter close to the conditioned transmitter output, keep the analog trace short, and use the manufacturer's pin and bypass recommendations. The single +5 V supply is particularly useful when the surrounding controller uses a compatible rail, although industrial qualification still requires checking the exact temperature grade and environmental limits.
پێشنیارکراو
Microprocessor-Based Data Acquisition
The ADS574KP fits legacy data-acquisition equipment that needs a complete sampling ADC on a microprocessor bus. Its internal reference, clock, sample-and-hold circuit, and microprocessor-compatible interface reduce the number of external components and make the converter a practical replacement for older ADC574-based designs. The 12-bit result can be read as a digital word after each conversion, while the 25 us maximum timing defines the minimum interval between complete acquisition operations. Confirm the original processor's control and data-bus timing against the manufacturer datasheet, and terminate unused interface pins as directed for the specific system configuration.
پێشنیارکراو
Laboratory Instrumentation
ADS574KP can serve as the measurement front end in compact laboratory instruments that monitor one analog voltage at a moderate rate. The 12-bit SAR converter supports digital readout, threshold evaluation, and calibration routines without requiring a separate sample-and-hold amplifier. Its through-hole 28-PDIP package is useful for educational, prototype, and repair-oriented equipment where manual assembly and socketed interchangeability are valuable. For bench instruments, use a quiet reference and supply arrangement, route the analog input away from display and switching circuitry, and verify calibration behavior across the full analog input range specified by Texas Instruments.
پێشنیارکراو
Embedded Control Systems
The ADS574KP is appropriate for embedded controllers that monitor an analog command, sensor, or feedback signal and need a deterministic sampling interval. Its maximum 25 us acquisition and conversion time provides ample margin for many position, temperature, or equipment-control loops, and the internal sampling network supports repeatable operation. A microcontroller can issue the start or read-control sequence and receive the 12-bit result through the dedicated data interface. Care is needed when the loop includes long cable runs or noisy sensors: condition the signal before the ADC and maintain a common, stable ground relationship between the source and converter.
پێشنیارکراو
Audio Measurement and Monitoring
ADS574KP can be used in audio monitoring equipment that requires a compact 12-bit digitizer for level, waveform, or diagnostic measurements rather than high-fidelity playback. The single-input SAR converter acquires the conditioned analog waveform in 25 us maximum, allowing slow or medium-rate envelope and control measurements. The part's through-hole package also makes it convenient for legacy audio test equipment and service repairs. Limit the input to the converter's permitted range, apply suitable anti-alias filtering, and avoid connecting the audio source directly if its amplitude or impedance can exceed the ADC's operating limits.
پێشنیارکراو
Legacy Equipment Repair and Retrofit
The ADS574KP is particularly useful for repairing legacy ADC574-based instrumentation because the manufacturer describes it as a drop-in replacement in most applications and retains the established 28-PDIP format. Internal sampling, lower power consumption, and single +5 V operation can simplify restoration of older measurement boards. Before installation, compare the original device's pin functions, supply voltage, reference requirements, conversion timing, and output coding with the ADS574 datasheet. Also inspect the analog input network for obsolete components, verify socket or board condition, and confirm that the replacement's operating grade suits the equipment's ambient temperature.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ ADS574KP — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | ADS574KP-2 | ADS574JP | ADS574KPG4 |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 28-PDIP | 28-PDIP - same | 28-PDIP - same | 28-PDIP - same |
| Resolution | 12 bit | 12 bit | 12 bit | 12 bit |
| Converter Type | Successive-approximation ADC | Successive-approximation ADC | Successive-approximation ADC | Successive-approximation ADC |
| Number of Inputs | 1 input | 1 input | 1 input | 1 input |
| Supply Voltage | +5 V | +5 V | +5 V | +5 V |
| Sampling | Internal sampling | Internal sampling | Internal sampling | Internal sampling |
| Digital Output Codes | 4096 codes | 4096 codes | 4096 codes | 4096 codes |
| Mounting Type | Through-hole | Through-hole | Through-hole | Through-hole |
جیاکەرەوە سەرەکییەکان
- Complete integrated sampling ADC (بەراورد بەADS574KP-2)
- Pin-compatible ADC574 modernization path (بەراورد بەADS574JP)
- Through-hole serviceability (بەراورد بەADS774JU)
- Single-input architecture (بەراورد بەADS574KPG4)
تێبینییەکانی دیزاین
Route the analog input directly to the ADS574KP input pin, with the source impedance and trace length following the manufacturer application guidance. Keep the input network away from clock, write-control, and high-current output traces. The 28-PDIP format provides generous spacing between pins, but signal integrity still depends on component placement: place input filtering or protection components close to the converter rather than distributing them across the board.
Decouple the +5 V supply at the device with the capacitance and placement specified in the Texas Instruments ADS574 datasheet. The ADC contains internal reference, clock, and sampling circuits, so supply impedance can affect conversion behavior. Use a short return path to the device ground, keep supply routing away from the analog input, and test the assembled board for supply droop during repeated conversions. Confirm the exact bypass values before PCB release.
Do not treat every 28-pin ADC as a drop-in replacement. ADS774JU, for example, is identified as a 28-pin SOIC and therefore does not match the ADS574KP's 28-PDIP footprint. Before substituting a family member, compare every pin name, the supply requirement, reference arrangement, control timing, and data-bus behavior. For legacy ADC574 replacements, also verify that the original circuit does not depend on external sample-and-hold behavior no longer present in the ADS574.
When restoring a legacy instrument, inspect the original analog input network for failed or out-of-tolerance capacitors and resistors because those components can distort input bandwidth and conversion accuracy independently of the converter. Use the manufacturer ADS574 pinout and electrical tables to check unused-pin treatment and control timing. After replacement, perform offset, gain, and full-scale verification over the operating range rather than checking only the zero-input code.
زانیاری پابەندبوون
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was identified for ADS574KP. AEC-Q100 qualification is not indicated for this industrial temperature device.