Texas Instruments

ADS7812P - 12-Bit, 40 kS/s Low-Power SAR ADC | Texas Instruments

MPN: ADS7812P ✓ چالاک
4.75 V to 5.25 V Vdss 50 uW power-down mode Id 16-pin plastic DIP, 0.3 inch body Package
MOQ: 1 |

ADS7812P گشتی

The Texas Instruments ADS7812P is a low-power, 12-bit successive-approximation-register analog-to-digital converter with a conversion rate of 40 kS/s, a 20 us maximum conversion time, and a 16-pin plastic DIP package. It operates from a single 4.75 V to 5.25 V supply and includes a sample-and-hold circuit, clock, reference, and serial data interface. The converter supports single-ended input, up to three analog inputs, and selectable bipolar or unipolar input polarity.

An ADC is a semiconductor that converts an analog voltage into a digital number for processing, storage, or transmission. The ADS7812P belongs to the successive-approximation-register ADC family, a low-power architecture that compares the sampled input against a capacitor-based internal DAC during successive conversion steps. Its 12-bit resolution provides 4,096 digital codes, making it suitable for data acquisition, industrial control, test equipment, and digital signal processing systems.

Key characteristics include ±0.5 LSB maximum integral and differential nonlinearity, 74 dB signal-to-noise ratio, 98 dB spurious-free dynamic range, and at least 72 dB SINAD. The converter can use its internal reference or an external reference, while the power-down mode limits consumption to 50 uW. These characteristics support accurate measurements in systems that do not require the throughput of a high-speed flash converter.

The serial interface reduces the number of PCB traces required to connect the converter to a microcontroller, digital signal processor, or programmable logic controller. The ADS7812 family is also pin-compatible with the 16-bit ADS7813, allowing engineers to evaluate resolution changes on a common PCB footprint. Multiple input ranges and selectable polarity broaden its usefulness in sensor, process-control, and instrumentation systems.

Typical applications include industrial process monitoring, laboratory data acquisition, digital signal processing, embedded instrumentation, and factory test equipment. Its low-power operation is especially useful where the converter must operate continuously from a single 5 V supply without the power and EMI characteristics of a high-speed switching converter.

The primary design consideration is analog signal conditioning. The input source must remain within the selected input range, the reference must be stable, and the serial clock and digital interface must be arranged to satisfy the converter timing requirements. A common mistake is to choose a wide input range for convenience and lose useful code resolution; selecting the narrowest range that safely covers the signal improves effective measurement precision.

This product page consolidates the manufacturer specifications, package information, application guidance, and verified replacement candidates into an engineering-oriented reference. It also distinguishes exact drop-in compatibility from changes in resolution or ordering code, helping designers decide whether a substitution can preserve the existing PCB and signal chain.

جێگرەوەکانی جێگۆڕکێ بۆ ADS7812P — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADS7812P (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Reference, Resolution, Input Type, Mounting Type.

Texas Instruments
Package: 16-pin PDIP (0.300 inch, 7.62 mm)
Reference: Internal or external
Resolution: 16 bits
بەراوردکردن لەگەڵ ADS7812P →
Texas Instruments
Package: 16-SOIC (DW)
Reference: Internal 2.5V or External
Resolution: 16 bit

ADS7812PG4

✅ جێگرەوەی ڕاستەوخۆ
📦 16-PDIP
Same 12-bit and 40 kS/s core ratings; grade-specific limits differ by

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

ADS7812PB

✅ جێگرەوەی ڕاستەوخۆ
📦 16-PDIP
Same 12-bit and 40 kS/s core ratings; ordering-grade or qualification limits differ by

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

ADS7813UB/1K

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 16-PDIP
16 bit · 40 kSPS · 20 us · SAR (Successive Approximation) · 1 (single-ended) · Single-Ended, Unipolar · 10 V (with 5V external reference) · 5 V

پەیوەندی بۆ نرخ

بینینی داتاشیت →

ADS7812P زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Converter Type 12-bit successive-approximation-register ADC
وردی 12 bit
Conversion Rate 40 kS/s
Maximum Conversion Time 20 us
Input Architecture 1 sampling ADC input with up to 3 analog input selections
Input Type Single-ended
Input Polarity Bipolar or unipolar
Integral Nonlinearity ±0.5 LSB maximum
Differential Nonlinearity ±0.5 LSB maximum
Signal-to-Noise Ratio 74 dB
SINAD 72 dB minimum
Spurious-Free Dynamic Range 98 dB
Supply Voltage Range 4.75 V to 5.25 V
Reference Internal or external reference
Maximum Power Dissipation 35 mW
Power-Down Current 50 uW power-down mode
Digital Interface Serial interface
پاکێج 16-pin plastic DIP, 0.3 inch body
دۆخی RoHS RoHS-compliant
Lead-Free Status Lead-free

ڕێنمایی ڕێکخستنی پینی ADS7812P 16-pin plastic dip, 0.3 inch body

ڕێکخستنی پین بۆ ADS7812P (پاکێجی 16-pin plastic dip, 0.3 inch body). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.

نەخشەی پینئاوتی پاکێجی 16-pin plastic dip, 0.3 inch body بۆ ADS7812P

هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADS7812P.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

ADS7812P گونجاوە بۆ 6 بەکارھێنانs: Industrial Process Monitoring, Laboratory Data Acquisition, Digital Signal Processing Front End, Embedded Instrumentation, Test and Measurement Equipment, Programmable Logic Control Systems.

🏭

Industrial Process Monitoring

The ADS7812P fits industrial process-monitoring systems that convert pressure, temperature, position, or level signals into digital measurements for a controller. Its 12-bit resolution provides 4,096 codes, while the 40 kS/s rate and 20 us maximum conversion time support responsive supervision of slowly changing process variables. The 4.75 V to 5.25 V single-supply operation simplifies analog conditioning around industrial transducers. A narrow input range matched to the sensor improves usable resolution, while the 74 dB SNR helps preserve signal integrity in electrically noisy factory environments.

🔧

Laboratory Data Acquisition

For laboratory instruments, the ADS7812P provides a compact serial-output ADC with 12-bit resolution, 40 kS/s throughput, and ±0.5 LSB maximum INL and DNL. It can acquire slowly varying sensor outputs, potentiometer positions, and conditioned analog channels without requiring a high-speed flash ADC. The internal-reference option simplifies bench prototypes, although an external reference can support calibration-sensitive measurements. Its 98 dB SFDR and 74 dB SNR are useful when engineers need a balance between acquisition accuracy, power, and circuit complexity.

🌐

Digital Signal Processing Front End

The ADS7812P serves as an analog front end in digital signal processing systems that convert external waveforms or sensor outputs into a serial digital stream. Its 40 kS/s sampling capability and 20 us maximum conversion time are appropriate for audio-band, control, vibration, and industrial waveform channels requiring more precision than a basic comparator-based converter. The serial interface reduces wiring between the ADC and a digital signal processor or FPGA. Designers should select the narrowest safe input range and use controlled clocking to avoid sacrificing resolution or introducing timing-related error.

🖥️

Embedded Instrumentation

The ADS7812P is appropriate for embedded instrumentation that measures one or more low-bandwidth analog inputs and reports them through a serial interface. Its 16-pin plastic DIP package is useful for prototypes, educational platforms, and through-hole industrial controller boards. Multiple input selections and selectable bipolar or unipolar polarity allow one converter to serve several sensing channels with suitable switching and protection. The 50 uW power-down mode helps when measurements are intermittent, while the 5 V operating range aligns with many embedded analog systems.

📺

Test and Measurement Equipment

The ADS7812P can serve as the measurement converter in compact automated test equipment where the measured signal is within a moderate bandwidth and 12-bit accuracy is sufficient. Its 40 kS/s throughput supports sequential measurement of control outputs, reference levels, or conditioned sensor channels. The ±0.5 LSB maximum INL and DNL, 72 dB minimum SINAD, and 98 dB SFDR help characterize low-level analog signals. Stable reference design, input settling time, and digital isolation remain more important than raw converter speed in many precision test paths.

⚡

Programmable Logic Control Systems

The ADS7812P integrates well with programmable logic controllers because it converts several single-ended analog inputs through a compact serial interface and requires only a single 5 V supply. It is appropriate for monitoring pressure, flow, level, and analog actuator feedback in compact control panels. The 12-bit code size maps cleanly to common 0–10 V or sensor ranges after conditioning, while the 40 kS/s rate is more than adequate for most process loops. A multiplexed input circuit should preserve settling time and provide overvoltage protection before each selected channel reaches the converter.

What is the operating voltage of the ADS7812P?
The ADS7812P operates from a single 4.75 V to 5.25 V supply. According to the Texas Instruments manufacturer datasheet, the device is designed around a nominal 5 V analog supply and includes a complete 12-bit capacitor-based SAR ADC with sample-and-hold, clock, reference, and serial-interface functions. The single-supply architecture simplifies instrumentation and industrial-control designs, although the analog input must remain within the range selected through the converter's input configuration.
What are the key specifications of ADS7812P that engineers should know?
The ADS7812P is a 12-bit SAR ADC with a 40 kS/s conversion rate and a 20 us maximum conversion time. According to the Texas Instruments manufacturer datasheet, it offers ±0.5 LSB maximum INL and DNL, 74 dB SNR, 72 dB minimum SINAD, and 98 dB SFDR. It operates from 4.75 V to 5.25 V, supports internal or external references, offers multiple input ranges, and is offered in a 16-pin plastic DIP package.
What is the conversion rate of ADS7812P?
The ADS7812P converts at up to 40 kS/s, corresponding to a maximum conversion time of 20 us. According to the Texas Instruments manufacturer datasheet, it contains a capacitor-based successive-approximation-register conversion stage with an integrated sample-and-hold circuit. This rate suits process monitoring, laboratory measurement, digital signal processing, and general-purpose data acquisition rather than high-bandwidth waveform capture.
What accuracy and noise performance does ADS7812P provide?
The ADS7812P provides ±0.5 LSB maximum integral nonlinearity and ±0.5 LSB maximum differential nonlinearity, with 74 dB SNR and 98 dB SFDR. The manufacturer datasheet also specifies at least 72 dB SINAD. These figures make the converter appropriate for precision process-control and instrumentation signals, although total system accuracy also depends on the reference, input amplifier, grounding, and analog-noise environment.
Where can I find the ADS7812P datasheet PDF and pinout?
The official ADS7812P datasheet PDF is located at https://www.ti.com/lit/ds/symlink/ads7812.pdf, while the manufacturer product page is https://www.ti.com/product/ADS7812. According to the manufacturer datasheet, the ADS7812P is offered in a 16-pin plastic DIP package. Use the pin-description table and package drawing in that PDF when assigning connector, reference, clock, control, and serial-data nets on the PCB.
Does ADS7812P support internal and external references?
Yes, the ADS7812P can operate with either an internal or an external reference. According to the Texas Instruments manufacturer datasheet, the converter includes a complete reference and serial interface while supporting multiple input ranges. Reference selection affects stability, calibration behavior, and analog-headroom requirements, so the reference configuration should be finalized before setting the input range and analog front end.
How much power does ADS7812P consume?
The ADS7812P has a maximum specified power dissipation of 35 mW and supports a 50 uW power-down mode. According to the Texas Instruments manufacturer datasheet, its low-power architecture is suitable for continuously operating acquisition and control systems. Actual board-level consumption depends on the supply voltage, conversion activity, clocking, reference configuration, and the digital interface state.
Where can I buy ADS7812P online?
Use the Request a Quote form on this page to request ADS7812P availability, current lead time, and an order quotation. The form connects the request directly with the XAIPART sales process without requiring you to navigate another seller or marketplace. For an engineering substitution, include the required package, production quantity, quality conditions, and target date in the request.
What is the price of ADS7812P?
Current ADS7812P pricing is displayed through the Request a Quote form on this page rather than as a static price statement. Submit the required quantity, package, and delivery information to receive an updated quotation. Pricing can vary with quantity, order cadence, component condition, and supply position, so a written quotation is the appropriate source for a purchase decision.
What is the lead time and stock status for ADS7812P?
The current stock position and lead time for ADS7812P should be confirmed through the Request a Quote form on this page. Request the quantity, target delivery date, and packaging requirements so the order can be matched against current inventory and production commitments. For scheduled designs, request a forecast allocation before placing recurring orders to reduce schedule risk.
What is the difference between ADS7812P and ADS7813?
The ADS7813 provides 16-bit resolution, while the ADS7812P provides 12-bit resolution, a difference of 4 bits or 33.3% in numerical resolution. According to the Texas Instruments product documentation, the ADS7813 is pin-compatible with the 16-pin ADS7812 family. The higher-resolution ADS7813 can provide finer quantization, but its acquisition timing, reference behavior, and system-level performance should be reviewed before replacing the ADS7812P.
What is the best alternative manufacturer equivalent for ADS7812P?
No verified cross-manufacturer drop-in equivalent was identified for the ADS7812P in the available replacement records. According to the Texas Instruments product documentation, the ADS7813 is pin-compatible with the ADS7812 family, but it increases resolution from 12 to 16 bits and therefore requires a complete timing and performance review. Use the Request a Quote form when you need help validating a specific replacement requirement.
When should I choose ADS7812P over ADS7813?
Choose the ADS7812P when a 40 kS/s conversion rate, 12-bit resolution, and lower-power 5 V acquisition are sufficient. The ADS7813 is appropriate when a design needs 16-bit resolution on the same pin-compatible family footprint. According to the Texas Instruments product documentation, the ADS7813 is pin-compatible with the ADS7812, but the 4-bit resolution increase can change conversion behavior, calibration needs, and data-processing requirements.
Is ADS7812P suitable for industrial control applications?
Yes, the ADS7812P is suitable for industrial control applications requiring low-power, moderate-rate conversion. According to the Texas Instruments product documentation, it supports multiple input ranges, single-ended input, bipolar or unipolar polarity, and internal or external references, with a 74 dB SNR and 40 kS/s throughput. Its 16-pin DIP package and serial interface also support compact embedded acquisition designs.
What can replace ADS7812P as a drop-in part?
ADS7812PG4 is the closest same-manufacturer ordering-code candidate identified for the ADS7812P, but its grade-specific electrical limits must be checked against the target design. The ADS7813 is also pin-compatible with the ADS7812 family, although it changes resolution from 12 to 16 bits. According to the manufacturer documentation, no verified cross-brand equivalent was found, so every substitution requires pinout, timing, reference, and accuracy verification.

داتای سەرچاوەی ئەندازیاری بۆ ADS7812P — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the ADS7812P for 5 V, low-power data-acquisition and industrial-control designs where 12-bit resolution, a 40 kS/s conversion rate, and serial output are sufficient. It is particularly appropriate for slowly varying sensor signals and compact embedded systems requiring multiple input ranges or selectable polarity. The ADS7813 is the appropriate family option when the same pin-compatible footprint must deliver 16-bit resolution, but the change in resolution requires review of timing, calibration, and downstream data processing. ADS7812PG4 and ADS7812PB are same-family ordering candidates that preserve the 12-bit conversion core and DIP footprint; their grade-specific electrical limits should be checked before substitution. No verified cross-brand drop-in equivalent was identified. For any replacement, confirm the physical pinout, serial timing, input-range configuration, reference behavior, acquisition settling, and qualification requirements rather than relying on the ADC function alone.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە ADS7812PG4 ADS7812PB ADS7813
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 16-PDIP 16-PDIP 16-PDIP 16-PDIP
Resolution 12 bit 12 bit 12 bit 16 bit

جیاکەرەوە سەرەکییەکان

  • Lower resolution with the same 40 kS/s family conversion rate (بەراورد بەADS7813)
  • Exact same-manufacturer ordering alternatives (بەراورد بەADS7812PG4)
  • Low-power operation for embedded acquisition (بەراورد بەADS7812PB)

تێبینییەکانی دیزاین

Select the narrowest analog input range that safely accommodates the maximum expected signal. A wider range leaves fewer codes available for the useful portion of the measurement and can reduce effective resolution even though the converter itself is 12 bits. Include startup and overvoltage margin when sizing the range, and verify that the selected polarity matches the analog front end. This is especially important for 0–5 V, unipolar sensors connected through resistive conditioning.

Place the converter, reference-decoupling network, analog input components, and digital interface components to minimize coupling between sensitive input and serial clock lines. Use a continuous ground plane, keep analog and digital return currents separate where practical, and place input filtering close to the ADC pin. The DIP package offers accessible pins, but lead length and breadboard capacitance can degrade settling time, particularly when multiplexing several analog sources.

Treat every multiplexed input as requiring adequate acquisition settling before conversion. Calculate the source impedance, the selected input range, and the allowed acquisition time, then add margin for switch resistance, leakage, and connector capacitance. When using an external reference, route it independently from switching nodes and observe the reference voltage and temperature limits in the manufacturer datasheet. These steps reduce conversion-dependent errors that cannot be corrected by software calibration alone.

Power the analog supply from a low-noise source and decouple it close to the device pins using the capacitance and layout recommended in the manufacturer datasheet. The 4.75 V to 5.25 V operating range provides margin around a nominal 5 V rail, but regulator tolerance, startup overshoot, and supply ripple must all be included in the worst-case budget. Digital clock and interface activity should not share high-current return paths with the reference and analog input nodes.

زانیاری پابەندبوون

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Yes
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The component is identified as RoHS-compliant and lead-free. No additional qualification or environmental-compliance claims are included.

داتا پشتڕاستکراوەتەوە لە: 2026-11-03 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

ADS7812P datasheet ADS7812P datasheet pdf ADS7812P pinout ADS7812P specifications ADS7812P 12 bit ADC ADS7812P 40 kS/s Texas Instruments ADS7812P ADS7812P DIP-16 ADS7812P equivalent ADS7812P replacement ADS7812P cross reference ADS7812P vs ADS7813 ADS7812P application circuit ADS7812P price ADS7812P stock

پێکهاتە و زاراوە پەیوەندیدارەکان

Texas Instruments ADS7812P ADS7812PG4 ADS7812PB ADS7813 analog-to-digital converter ADC successive-approximation-register ADC SAR ADC sample-and-hold 12-bit resolution 40 kS/s conversion rate serial interface internal reference external reference signal-to-noise ratio SINAD spurious-free dynamic range integral nonlinearity differential nonlinearity 16-PDIP DIP package through-hole package industrial control data acquisition
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ