ADS7813P - 16-Bit, 40 kSPS Low-Power ADC | Texas Instruments
MPN: ADS7813P ✓ چالاکADS7813P گشتی
An ADC is a data-conversion IC that transforms an analog voltage into a numeric value for processing, measurement, or control. Successive-approximation, or SAR, ADCs repeatedly compare the sampled input with a trial DAC and progressively refine the result. This architecture is appropriate for precision instrumentation, industrial measurement, data acquisition, and embedded control because it combines deterministic conversion behavior, serial digital output, and relatively low power consumption. The ADS7813P belongs to the ADC, data-converter IC, signal-processing IC, and semiconductor hierarchies.
The ADS7813P provides 16-bit resolution, a sampling rate of up to 40 kSPS, and a maximum conversion time of 20 microseconds. It operates from a single +5 V supply and can be configured for several analog input ranges, including ±10 V, ±5 V, 0 V to 10 V, and 0.5 V to 4.5 V. A high-impedance input range from 0.3 V to 2.8 V is also supported. These input options make the converter adaptable to bipolar instrumentation signals, unipolar process-control voltages, and low-level sensor outputs when appropriate front-end circuitry is used.
The converter is pin-compatible with the 12-bit ADS7812, enabling a simplified upgrade path when greater numerical resolution is required without changing the board footprint. Its capacitor-based SAR core uses a sample-and-hold stage to capture the input before successive comparison begins. The integrated reference, clock, and serial interface reduce the number of external components and simplify synchronization with embedded systems. Use the manufacturer pin-description table when assigning PCB signals because the exact physical pin functions and layout requirements must be followed without modification.
Typical applications include precision digital voltmeters, process-control instrumentation, temperature measurement systems, laboratory data loggers, industrial sensor interfaces, and low-speed closed-loop monitoring. The 40 kSPS rate is suitable for continuously changing control or measurement signals rather than high-frequency waveform capture. An external buffer, protection network, or gain stage may be needed when the source impedance, common-mode voltage, or input range exceeds the converter's direct connection limits.
Design the reference and analog input paths for low noise, and place the input and reference components close to the converter to minimize trace pickup. Confirm settling time, acquisition time, source impedance, and clock timing in the manufacturer datasheet. Account for conversion latency in the data-processing pipeline, and use the supported serial clock configuration to avoid readback errors during changing input conditions.
This product page combines manufacturer specifications, sourcing information, package details, practical design guidance, and a structured comparison of documented ADS7813 family options. It is intended to help engineers evaluate the ADS7813P for low-power, high-resolution measurement designs and to plan PCB, signal-chain, and firmware integration with fewer engineering assumptions.
جێگرەوەکانی جێگۆڕکێ بۆ ADS7813P — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADS7813P (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Supply Voltage, Mounting Type, Number of Input Channels, Resolution.
ADS7813PG4
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADS7813P زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Converter Type | Successive-approximation register (SAR) ADC |
| وردی | 16 bit |
| ڕێژەی نموونەگرتن | 40 kSPS |
| Maximum Conversion Time | 20 us |
| Number of Input Channels | 1 channel |
| Input Type | Single-ended |
| ڤۆڵتیەی دابینکردن | +5 V |
| Supported Input Ranges | +/-10 V, +/-5 V, 0 V to 10 V, and 0.5 V to 4.5 V |
| High-Impedance Input Range | 0.3 V to 2.8 V |
| Architecture | Capacitor-based SAR with sample-and-hold |
| Digital Interface | SPI-compatible serial interface |
| Clocking | Internal or external clock |
| مەودای پلەی گەرمیی کارکردن | -40 C to +85 C |
| پاکێج | 16-pin DIP, 0.3 inch |
| جۆری دامەزراندن | Through-hole |
| Pin Compatibility | Pin-compatible with the 12-bit ADS7812 |
| Reference | Integrated reference |
ڕێنمایی ڕێکخستنی پینی ADS7813P 16-pin dip, 0.3 inch
ڕێکخستنی پین بۆ ADS7813P (پاکێجی 16-pin dip, 0.3 inch). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADS7813P.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
ADS7813P گونجاوە بۆ 6 بەکارھێنانs: Precision Digital Voltmeter, Industrial Process Monitoring, Temperature Measurement System, Laboratory Data Acquisition, Closed-Loop Equipment Control, Battery-Powered Field Instrument.
Precision Digital Voltmeter
The ADS7813P suits precision digital voltmeter designs that require 16-bit measurement resolution without the complexity of a high-speed flash converter. Its 40 kSPS maximum sampling rate provides useful response for relatively slow DC and low-frequency signals, while the selectable input ranges allow the front end to handle bipolar ±5 V or ±10 V instrument signals. The serial interface can transfer each conversion result to a microcontroller or display controller using synchronized clocking. Because the converter measures 16-bit output codes, calibration should include offset, gain, reference, and input-network errors to realize the system’s expected accuracy.
پێشنیارکراو
Industrial Process Monitoring
The ADS7813P is appropriate for industrial process-monitoring loops that convert slowly changing analog process signals into controller-readable measurements. Its 16-bit resolution improves the distinction between closely spaced readings, and the 40 kSPS rate supports frequent updates without requiring a waveform-class ADC. A selectable 0 V to 10 V range can accommodate process-controller outputs, while the ±5 V and ±10 V options support appropriately conditioned bipolar signals. In an industrial design, include input protection, isolation or surge-control measures, a defined grounding strategy, and calibration against the sensor and transmitter chain.
پێشنیارکراو
Temperature Measurement System
The ADS7813P can digitize temperature-derived voltages from resistive sensors, thermocouple front ends, or integrated temperature sensors. Its 16-bit resolution is useful when the temperature-to-voltage signal occupies only a small portion of the converter’s selected range, while the high-impedance 0.3 V to 2.8 V mode can simplify sensor excitation and signal conditioning. The 40 kSPS rate is more than sufficient for common thermal monitoring tasks. Correct system performance depends on a stable reference, low-noise excitation, input-settling time, cold-junction compensation where applicable, and calibration across the intended temperature span.
پێشنیارکراو
Laboratory Data Acquisition
The ADS7813P fits laboratory data-acquisition modules that record low-frequency analog waveforms or repetitive voltage measurements at moderate rates. The 16-bit converter provides finer quantization than a 12-bit instrument, and the 40 kSPS sampling rate supports data capture for control signals, sensor outputs, and slowly varying waveforms. Its internal or external clock support allows acquisition to be synchronized with a host controller. For faithful waveform capture, evaluate input bandwidth and acquisition settling independently of the conversion rate, and include anti-alias filtering when the signal contains content above half the selected sampling frequency.
پێشنیارکراو
Closed-Loop Equipment Control
The ADS7813P can serve as the measurement element in closed-loop control equipment such as temperature controllers, pressure regulators, and laboratory actuators. The 16-bit result gives the controller a more precise representation of the feedback voltage than a typical 12-bit conversion, while the 40 kSPS rate permits frequent updates for slow or medium-speed loops. The device is used behind an input-conditioning and protection network, with the controller applying the result through a separate converter or actuator driver. Control performance must account for total loop delay, digital filtering, sensor dynamics, and actuator settling rather than conversion time alone.
پێشنیارکراو
Battery-Powered Field Instrument
The ADS7813P can support battery-powered field instruments that periodically measure low-bandwidth sensor channels. Its low-power, single-supply SAR architecture is compatible with compact measurement electronics, and the serial interface allows the converter to remain connected to a low-power controller without a parallel data bus. Duty-cycled operation can further reduce system energy use by powering the analog section only around conversions. The complete design must include a regulator with suitable noise and transient response, input protection suitable for field cables, low-leakage protection components, and calibration that remains stable over temperature and battery voltage.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ ADS7813P — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | ADS7813PG4 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | DIP-16 | DIP-16 - same |
| Resolution | 16 bit | 16 bit |
| Sampling Rate | 40 kSPS | 40 kSPS |
| Maximum Conversion Time | 20 us | 20 us |
| Converter Architecture | Capacitor-based SAR | Capacitor-based SAR |
| Supply Voltage | Single +5 V | Single +5 V |
| Input Channels | 1 single-ended channel | 1 single-ended channel |
| Digital Interface | SPI-compatible serial interface | SPI-compatible serial interface |
جیاکەرەوە سەرەکییەکان
- Higher conversion resolution than the 12-bit ADS7812 (بەراورد بەADS7812)
- Single-supply operation with flexible input ranges (بەراورد بەADS7813PG4)
- Integrated acquisition and serial interface reduce system complexity (بەراورد بەADS7813U/1K)
تێبینییەکانی دیزاین
Follow the Texas Instruments datasheet layout exactly when placing the 16-pin DIP converter. Keep the analog input, reference, and ground paths short, and position input-network and bypass components close to their associated pins. Route serial signals away from sensitive analog traces, maintain a continuous ground return, and observe the package orientation shown in the manufacturer drawing.
Verify that the source impedance and the selected input range satisfy the converter’s acquisition requirements. Allow the input network to settle before each conversion, and confirm timing for internal- and external-clock operation in the manufacturer datasheet. Add appropriate filtering when high-frequency noise or aliasing could affect the converted result, especially in precision measurement systems.
Do not treat equal pin count as proof of electrical interchangeability when comparing the ADS7813P with other devices. The ADS7813PG4 is the documented same-family DIP-16 alternative, but production grade, temperature limits, ordering configuration, and qualification still require review. Also confirm the external input-range network; applying a signal outside the selected range can exceed the analog input limits.
زانیاری پابەندبوون
The ADS7813P is a general-purpose analog-to-digital converter rather than an automotive-qualified device. Confirm current material and environmental declarations with Texas Instruments.