Texas Instruments

ADS7816P - 12-Bit 200kHz SAR ADC | Texas Instruments

MPN: ADS7816P ✓ چالاک
100 mV to 5 V Vdss 3 µA maximum Id 8-pin plastic mini-DIP (PDIP) Package
MOQ: 1 |

ADS7816P گشتی

Texas Instruments ADS7816P is a 12-bit, 200 kHz sampling analog-to-digital converter with a differential input, synchronous serial interface, and low-power operation with automatic power-down, housed in an 8-pin plastic mini-DIP package. It accepts a 4.5 V supply and supports a reference voltage from 100 mV to 5 V, corresponding to output resolutions from 24 µV to 1.22 mV.

A sampling ADC is a data-acquisition IC that samples an analog voltage at discrete instants and converts each sample into a digital code. The ADS7816P belongs to the SAR ADC family, a successive-approximation architecture that determines each output bit sequentially. Its 12-bit resolution supports 4096 digital codes, making it suitable for industrial monitoring, instrumentation, and systems that need modest measurement resolution at a relatively high sampling rate.

The principal advantages are a 200 kHz sampling rate, a differential input architecture, and automatic power-down with only 3 µA maximum power-down current. The differential input can reject common-mode noise when the source is balanced around a midpoint. The synchronous serial interface provides a compact, deterministic connection to a controller, while automatic shutdown reduces consumption when conversions are infrequent. The 4.5 V operating supply is convenient for conventional 5 V industrial systems when suitable tolerances and bypass capacitors are used.

The reference voltage defines the converter’s input range and least-significant-bit weight. With a 100 mV reference, one code represents approximately 24 µV; with a 5 V reference, one code represents approximately 1.22 mV. A small reference therefore improves sensitivity around a narrow signal range but also reduces full-scale headroom. Differential input voltage must remain within the device’s specified common-mode and full-scale limits, so the analog front end must be designed before selecting the reference range.

Typical uses include factory process monitoring, temperature and pressure sensor acquisition, battery and power-system measurements, remote data acquisition, and isolated or noisy industrial environments where a differential input improves signal integrity. The synchronous serial interface also suits systems that need predictable sampling timing rather than a free-running parallel data bus. For these applications, reference accuracy, source impedance, and converter timing are as important as the nominal 12-bit resolution.

The principal design consideration is analog signal conditioning. Keep the differential input traces short, route them away from switching circuitry, and follow the manufacturer’s input-capacitance recommendations. Provide stable supply and reference bypassing, verify the input common-mode range in the worst case, and account for source settling time between conversions. These practices help preserve the practical accuracy expected from a 12-bit converter.

This page consolidates the core electrical characteristics, package information, design guidance, application examples, and sourcing structure for the ADS7816P, adding engineering-focused context to the manufacturer’s basic ordering and conversion data.

جێگرەوەکانی جێگۆڕکێ بۆ ADS7816P — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADS7816P (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Resolution, Sampling Rate.

Analog Devices
Package: 8-pin PDIP (300 mil)
Resolution: 10 bit
Sampling Rate: 73 ksps
بەراوردکردن لەگەڵ ADS7816P →

هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.

داوای جێگرەوەکان بکە

ADS7816P زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Converter Type Successive-approximation register ADC
وردی 12 bit
ڕێژەی نموونەگرتن 200 kHz
Input Architecture Differential
Input Channels 1 channel
جۆری ڕووکار Synchronous serial interface
Reference Voltage Range 100 mV to 5 V
Resolution at 100 mV Reference 24 µV per code
Resolution at 5 V Reference 1.22 mV per code
ڤۆڵتاژی دابینکردنی کارکردن 4.5 V
Automatic Power-Down Current 3 µA maximum
Analog Input Type Differential
پاکێج 8-pin plastic mini-DIP (PDIP)
جۆری دامەزراندن Through-hole

ڕێنمایی ڕێکخستنی پینی ADS7816P 8-pin plastic mini-dip (pdip)

ڕێکخستنی پین بۆ ADS7816P (پاکێجی 8-pin plastic mini-dip (pdip)). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.

نەخشەی پینئاوتی پاکێجی 8-pin plastic mini-dip (pdip) بۆ ADS7816P

هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADS7816P.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

ADS7816P گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor Acquisition, Temperature and Pressure Monitoring, Battery and Power-System Measurement, Remote Data Acquisition, Process-Control Instrumentation, Test and Measurement Equipment.

🏭

Industrial Sensor Acquisition

The ADS7816P fits industrial sensor acquisition because it combines a 12-bit conversion resolution with a 200 kHz sampling rate and differential input. Place it at the output of an instrumentation front end that converts a current- or voltage-based sensor into a differential signal. The differential path helps suppress common-mode disturbance, while the 100 mV to 5 V reference range allows the converter to be scaled around the sensor’s useful signal band. A small reference improves sensitivity for millivolt-level measurements, but the analog input must remain within the converter’s specified common-mode limits.

🌐

Temperature and Pressure Monitoring

The ADS7816P is appropriate for temperature and pressure monitoring systems that periodically sample slowly changing analog signals but need more resolution than a coarse comparator provides. Its 12-bit output provides 4096 code positions, while the 200 kHz capability leaves timing margin for acquisition, filtering, and oversampling. Connect the sensor conditioner through a differential driver, select a reference that matches the sensor output range, and use automatic power-down when the measurement cycle is intermittent. The 3 µA maximum power-down current helps preserve system standby budget.

⚡

Battery and Power-System Measurement

The ADS7816P can measure supply, load, or energy-storage voltages when the design requires a compact, multiplexed measurement channel. Its 200 kHz sampling rate supports faster supervisory loops than a low-rate slow ADC, and the differential input can monitor a divided differential signal while rejecting common-mode shifts. The 4.5 V operating supply suits a 5 V-based measurement section. Choose a 5 V reference for maximum input range or a lower reference for finer resolution, while ensuring shunt, divider, and protection networks do not exceed the converter’s input limits.

🧩

Remote Data Acquisition

The ADS7816P fits remote data-acquisition modules because its synchronous serial interface, differential input, and automatic power-down reduce wiring and standby demand. A controller can issue conversion commands and clock the result through a deterministic serial link, while the differential analog path supports longer or noisier interconnects when paired with balanced source circuitry. The device also serves isolated acquisition when the isolation barrier and differential driver are designed correctly. Reference accuracy and front-end noise become important because both directly affect the useful bits delivered over the serial interface.

🏭

Process-Control Instrumentation

The ADS7816P can serve as the measurement element in a process-control front end when the controlled variable requires deterministic sampling at up to 200 kHz. Place the converter behind an input filter and differential driver, then synchronize acquisition with the control loop through the serial interface. The 12-bit resolution supports proportional and integral control around a calibrated process range, while the 100 mV to 5 V reference flexibility allows measurement scaling without changing the ADC family. Avoid using nominal bit count as proof of control accuracy; include sensor, reference, and calibration errors in the loop budget.

🔧

Test and Measurement Equipment

The ADS7816P is useful in compact test and measurement equipment that samples an in-range differential voltage and transfers the result to a controller. Its 12-bit resolution supports general-purpose amplitude and status measurements, while the 200 kHz rate allows repeated samples for averaging, peak detection, or simple waveform characterization. The synchronous serial interface simplifies connection to a microcontroller or programmable logic device. Instrument designs should pay attention to reference stability, input settling, source impedance, and shielding, because these factors can dominate the nominal 12-bit converter performance in a practical bench instrument.

What are the key specifications of ADS7816P that engineers should know?
The ADS7816P is a 12-bit successive-approximation ADC with a 200 kHz sampling rate, differential input, and synchronous serial interface. According to the Texas Instruments ADS7816 datasheet, it operates from a 4.5 V supply, supports reference voltages from 100 mV to 5 V, and enters automatic power-down with a maximum current of 3 µA. It is offered in an 8-pin plastic mini-DIP package and resolves 24 µV per code with a 100 mV reference or 1.22 mV per code with a 5 V reference.
What type of analog-to-digital converter is the ADS7816P?
The ADS7816P is a 12-bit successive-approximation register ADC with one differential input channel and a maximum sampling rate of 200 kHz. According to the Texas Instruments ADS7816 datasheet, it uses a synchronous serial interface and supports reference voltages from 100 mV to 5 V. The SAR architecture is appropriate for instrumentation, sensor acquisition, and industrial control systems that prioritize deterministic conversion behavior, modest resolution, and compact package size.
What is the sampling rate and resolution of ADS7816P?
The ADS7816P combines a 12-bit resolution with a maximum sampling rate of 200 kHz, producing 4096 possible digital codes for each conversion. According to the Texas Instruments ADS7816 datasheet, its differential input and synchronous serial interface support continuous acquisition without a parallel data bus. The effective resolution depends on reference accuracy, input noise, source impedance, and analog front-end design, so nominal bit count does not by itself guarantee 12-bit measurement accuracy.
Where can I download the ADS7816P datasheet PDF?
The official ADS7816P datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/ads7816.pdf. It contains the electrical characteristics, pin description, functional description, operating information, and application details for the ADS7816 family. Use the manufacturer document as the controlling reference for supply limits, reference requirements, conversion timing, input range, and package drawings when designing or qualifying the circuit.
Where can I find the ADS7816P pinout and package details?
The ADS7816P uses an 8-pin plastic mini-DIP package, and its complete pin assignments should be taken from the pin-description table in the Texas Instruments ADS7816 datasheet. The family is also offered in 8-lead SOIC and 8-lead MSOP packages, but those package options do not share the same physical footprint as the ADS7816P. Confirm the ordering suffix and compare the manufacturer pin table before assigning signals or creating a PCB footprint.
What reference voltage should I use with the ADS7816P?
The ADS7816P reference can range from 100 mV to 5 V, and the selection determines the measurement range and code weight. According to the Texas Instruments ADS7816 datasheet, a 100 mV reference gives approximately 24 µV per code, while a 5 V reference gives approximately 1.22 mV per code. Choose a reference that accommodates the differential signal while preserving the required sensitivity, then include reference accuracy and drift in the total error budget.
How much current does the ADS7816P consume in power-down mode?
The ADS7816P draws no more than 3 µA in automatic power-down mode, according to the Texas Instruments ADS7816 datasheet. This makes the converter suitable for periodically sampled systems that spend substantial time between conversions. Actual application consumption also depends on supply voltage, conversion activity, reference implementation, and external circuitry, so measure the complete power budget rather than treating the 3 µA figure as the total system current.
Is ADS7816P suitable for differential sensor measurement?
The ADS7816P is suitable for differential sensor measurement because it has a differential analog input and a selectable reference range. According to the Texas Instruments ADS7816 datasheet, its input architecture supports rejection of common-mode disturbances when the sensor output remains within the specified range. A matched instrumentation amplifier, sensor excitation source, and input filtering network should still be engineered around the converter’s common-mode limits, settling requirements, and acquisition timing.
When should I choose ADS7816P for a new design?
Choose the ADS7816P when a design needs a 12-bit ADC, a 200 kHz maximum sampling rate, a differential input, and a compact synchronous serial interface in an 8-pin PDIP package. According to the Texas Instruments ADS7816 datasheet, it is particularly suitable for sensor monitoring and industrial data acquisition. Avoid selecting it when the PCB requires a surface-mount footprint, when higher resolution or conversion throughput is essential, or when the input exceeds its stated common-mode limits.
What is the difference between ADS7816P and ADS7816UB/2K5?
The ADS7816P is the 8-pin plastic mini-DIP ordering option, while the ADS7816UB/2K5 designation refers to a different packaged ordering option in the ADS7816 family. The manufacturer family shares the core 12-bit, 200 kHz SAR conversion concept, but package suffix changes affect the physical PCB footprint and purchasing configuration. Because the two ordering options do not use the same package, they are not direct drop-in replacements without a board-level redesign.
Can another ADC directly replace ADS7816P on the same PCB?
No verified pin-compatible drop-in replacement for the ADS7816P was identified in the manufacturer and cross-reference results reviewed for this product. The ADS7816P uses an 8-pin PDIP footprint, so a candidate must match both the package and the pin assignments rather than merely offer similar resolution and speed. Use the Texas Instruments cross-reference search for additional qualification, and avoid treating same-family SOIC or MSOP options as physical drop-in replacements.
What can replace ADS7816P?
A direct replacement for ADS7816P must use the same 8-pin PDIP footprint, preserve the pin assignments, support the required 4.5 V operating supply, and provide compatible conversion and serial-interface timing. No drop-in replacement meeting those conditions was confirmed by the cross-reference results reviewed for this page. The ADS7816 family includes SOIC and MSOP versions, but those are package changes rather than drop-in substitutes. Request a qualified source recommendation through the Request a Quote form if supply continuity is critical.
Where can I buy ADS7816P and check its lead time?
Use the Request a Quote form on this page to request current ADS7816P availability, lead time, and order handling from XAIPART. The ADS7816P is listed as an active 8-pin PDIP member of the Texas Instruments ADS7816 family, but its lifecycle designation does not by itself establish current inventory. Provide the required quantity, target date, and whether reel, tray, or other approved packing is needed so the request can be evaluated accurately.
What is the price of ADS7816P?
Current ADS7816P pricing and quantity availability are handled through the Request a Quote form on this page rather than embedded in static product copy. Submit the required order quantity and package or shipment requirements to receive a current quotation. The price may vary with quantity, component condition, delivery terms, and market availability, so a request tied to a specific production schedule produces a more useful commercial response than a generic single-unit figure.
How should I design the analog input for ADS7816P?
Design the ADS7816P analog input around its differential nature, input common-mode limits, and acquisition timing. According to the Texas Instruments ADS7816 datasheet, the converter supports differential inputs and a reference from 100 mV to 5 V. Keep input traces short, place filtering close to the converter, ensure the source can settle between samples, and verify worst-case signal excursion against the full-scale and common-mode limits. Reference and supply bypassing should follow the manufacturer’s recommended layout.
Does ADS7816P support RoHS and automotive qualification?
The RoHS and REACH status of the ADS7816P should be confirmed for the exact ordering suffix and current manufacturer declarations before production release. The reviewed Texas Instruments information identifies it as an industrial 8-pin PDIP ADC, but it does not establish AEC-Q100 qualification for this ordering option. If an automotive design requires qualified materials, request the relevant manufacturer documentation and quality records rather than inferring compliance from the generic ADS7816 family name.

داتای سەرچاوەی ئەندازیاری بۆ ADS7816P — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the ADS7816P when the PCB can accept an 8-pin PDIP and the design needs a 12-bit ADC with a 200 kHz sampling rate, differential input, and synchronous serial interface. It is particularly suitable for industrial sensor acquisition, power-system measurement, and compact data-acquisition modules where the reference can be scaled from 100 mV to 5 V and duty-cycled operation is valuable. The family’s SOIC and MSOP ordering options may be electrically similar, but they do not fit the same PCB footprint and therefore are not drop-in choices. If the application requires more than 12 bits, substantially higher throughput, simultaneous sampling, or a larger package ecosystem, select a different converter family. Confirm the analog common-mode range, acquisition time, reference accuracy, and lifecycle requirements before releasing the design.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە
Converter Type 12-bit SAR ADC
Sampling Rate 200 kHz
Input Architecture Differential
Interface Synchronous serial
Reference Voltage Range 100 mV to 5 V
Resolution at 100 mV Reference 24 µV per code
Operating Supply 4.5 V
Power-Down Current 3 µA maximum
Package 8-pin plastic mini-DIP
Brand Texas Instruments

جیاکەرەوە سەرەکییەکان

  • Differential input in an 8-pin PDIP (بەراورد بەADS7816UB/2K5)
  • Adjustable measurement scale through reference selection (بەراورد بەADS7816UB/2K5)
  • Low-power acquisition between conversions (بەراورد بەADS7816UB/2K5)

تێبینییەکانی دیزاین

Treat the differential input common-mode range as a hard design constraint. Select the sensor amplifier, divider network, and reference so the signal remains centered within the converter’s permitted input range under tolerance, startup, and fault conditions. A differential input does not make the ADC tolerant of overvoltage or out-of-range common-mode voltage. Add protection that preserves normal signal bandwidth and verify the resulting clamp levels against the manufacturer’s absolute-maximum ratings.

Place input filtering, reference bypassing, and supply-decoupling components close to their associated pins. Route the differential pair together, keep it short, and avoid crossing switching or high-current paths. A reference that is stable at the IC does not necessarily produce a quiet measurement: reference noise, impedance, and grounding can dominate the 12-bit conversion result. Follow the Texas Instruments ADS7816 datasheet layout and grounding guidance when reproducing the reference circuit.

Verify that the source settles to the required accuracy within the conversion interval. The 200 kHz sampling rate does not automatically mean every source can drive the ADS7816P accurately at that rate. Include the source resistance, output filter, switch resistance, capacitor charging time, and differential acquisition time in the settling calculation. Use the datasheet acquisition-time and source-impedance guidance when designing multiplexed inputs or sampling high-impedance sensors.

Use automatic power-down when conversions are infrequent, but confirm the device is reactivated and acquires a valid conversion before reading the output. The 3 µA maximum power-down current is a chip-level figure and does not include the reference, pull networks, interface devices, or leakage through surrounding circuitry. Budget the complete acquisition module’s standby current and ensure the supply sequence does not create an invalid reference or partially powered conversion.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

Compliance status was not established for the exact ADS7816P ordering suffix. Confirm current material and quality declarations with Texas Instruments before production release.

داتا پشتڕاستکراوەتەوە لە: 2026-11-03 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

ADS7816P datasheet ADS7816P datasheet pdf ADS7816P pinout ADS7816P 12 bit ADC ADS7816P 200 kHz sampling ADS7816P differential input ADS7816P reference voltage ADS7816P PDIP package ADS7816P application circuit ADS7816P equivalent ADS7816P replacement ADS7816P vs ADS7816UB/2K5 Texas Instruments ADS7816P ADS7816P price ADS7816P stock

پێکهاتە و زاراوە پەیوەندیدارەکان

Texas Instruments ADS7816P ADS7816 ADS7816UB/2K5 analog-to-digital converter ADC successive-approximation register SAR ADC sampling ADC differential input synchronous serial interface reference voltage power-down mode 8-pin plastic mini-DIP PDIP through-hole package 12-bit resolution 200 kHz sampling rate 24 µV per code 1.22 mV per code 4.5 V supply 3 µA power-down current industrial sensor acquisition process-control instrumentation
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ