ADS7825P - 16-Bit, 4-Channel SAR ADC | Texas Instruments
MPN: ADS7825P ✓ چالاکADS7825P گشتی
A sampling ADC is a category of data-converter IC that samples an analog input, holds it on an internal sample-and-hold capacitor, and converts the held voltage into a digital code. The ADS7825P belongs to the ADC > data converter > semiconductor hierarchy and combines a four-channel analog multiplexer, sample-and-hold circuit, internal clock, reference circuitry, and parallel or serial microprocessor interface in one package.
Key features include 16-bit resolution, four multiplexed input channels, conversion within plus or minus 2.0 LSB, and laser-trimmed input-scaling resistors with channel-to-channel matching of plus or minus 0.1%. The converter supports both parallel and serial data outputs, allowing it to connect to processors with either interface style. A power-down mode reduces consumption to 50 microwatts when conversion performance is not required.
The architecture is suited to industrial measurement systems because the plus or minus 10 V input range accepts bipolar sensor signals without requiring a separate front-end amplifier for every channel. Its internal multiplexer reduces the number of analog connections, while the sample-and-hold stage provides a stable input during conversion. The 25 microsecond maximum conversion time supports deterministic control and measurement loops.
Typical uses include process-control instrumentation, data acquisition, industrial sensor interfaces, laboratory measurement equipment, and embedded monitoring systems. The parallel interface can accelerate transfers to compatible microprocessors, while the serial interface reduces the number of signal connections when board space is more important than maximum bus throughput.
A key design consideration is signal conditioning. Although the ADC accepts plus or minus 10 V, each source must remain within the input range, and external protection may be necessary for transients or sustained overvoltage. Designers should also follow the manufacturer pin-description table, reference configuration, and layout guidance when assigning a complete 28-pin PDIP footprint.
This product page consolidates the exact manufacturer and distributor specifications, identifies the limits of cross-brand substitution, and adds practical selection guidance that helps engineers determine whether the ADS7825P fits a new or existing 28-pin measurement design.
جێگرەوەکانی جێگۆڕکێ بۆ ADS7825P — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADS7825P (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Channel-to-Channel Matching, Mounting Type, Resolution, Supply Voltage.
هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.
داوای جێگرەوەکان بکەADS7825P زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| ADC Type | Successive-approximation sampling ADC |
| وردی | 16 bit |
| Number of Input Channels | 4 channels |
| Sampling and Conversion Time | 25 us maximum |
| Integral Nonlinearity | plus or minus 2.0 LSB maximum |
| مەودای ڤۆڵتاژی ئینپوت | plus or minus 10 V |
| Channel-to-Channel Matching | plus or minus 0.1% |
| ڤۆڵتیەی دابینکردن | plus 5 V |
| Maximum Power Dissipation | 50 mW |
| Power-Down Current | 50 uW |
| Data Output Interface | Parallel or serial |
| Input Multiplexer | 4-channel analog multiplexer |
| Sample-and-Hold | On-chip sample-and-hold |
| Internal Clock | On-chip clock |
| Reference | On-chip reference |
| پاکێج | 28-pin 0.3-inch PDIP |
| جۆری دامەزراندن | Through-hole |
| Process Technology | CMOS |
ڕێنمایی ڕێکخستنی پینی ADS7825P 28-pin 0.3-inch pdip
ڕێکخستنی پین بۆ ADS7825P (پاکێجی 28-pin 0.3-inch pdip). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADS7825P.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
ADS7825P گونجاوە بۆ 6 بەکارھێنانs: Industrial Process-Control Instrumentation, Four-Channel Sensor Data Acquisition, Laboratory Voltage Measurement, Power-Supply and Load Monitoring, Embedded Condition-Monitoring System, Mixed-Signal Control Board.
Industrial Process-Control Instrumentation
ADS7825P suits process-control panels that must acquire several bipolar sensor signals with consistent channel performance. Its four-channel analog multiplexer reduces the number of analog front-end connections, while the plus or minus 10 V input range accepts bipolar transmitter outputs when additional scaling is not required. The 16-bit resolution and plus or minus 0.1% channel matching support precise process readings, and the 25 microsecond maximum conversion time allows sequential measurements within a deterministic control interval. Designers should still add input protection and isolation where field wiring introduces surge, ground-loop, or common-mode hazards.
پێشنیارکراو
Four-Channel Sensor Data Acquisition
ADS7825P provides a practical four-channel front end for temperature, pressure, level, or position sensing when the conditioned outputs remain within plus or minus 10 V. The internal multiplexer selects one sensor at a time, and the on-chip sample-and-hold circuit stabilizes the analog value during conversion. A conversion time of 25 microseconds maximum helps bound the time required to scan all four channels. For thermocouples and low-level sensors, add the appropriate amplification, cold-junction compensation, filtering, and galvanic isolation rather than connecting the sensor output directly.
پێشنیارکراو
Laboratory Voltage Measurement
ADS7825P is appropriate for laboratory instruments that measure bipolar voltages while requiring finer digital resolution than an 8-bit converter. Its 16-bit format captures substantially more code levels, while the plus or minus 10 V range gives the instrument a practical direct input span. The maximum plus or minus 2.0 LSB integral nonlinearity and 25 microsecond conversion time support repeatable measurement performance. Use the parallel interface when transferring large sample blocks rapidly, or the serial interface to simplify wiring in compact bench equipment. Front-end filtering and calibration remain important for accurate results.
پێشنیارکراو
Power-Supply and Load Monitoring
ADS7825P can monitor multiple bipolar supply or load signals when they are conditioned to the converter's plus or minus 10 V range. The four-channel multiplexer allows a controller to sequence voltage measurements without requiring four complete converter front ends. Its 16-bit resolution can represent small changes in a slowly varying rail more effectively than an 8-bit converter, while the specified plus or minus 0.1% channel matching supports comparison across channels. Use input dividers with suitable tolerances, protect against transients, and maintain a common ground unless an isolated front end is installed.
پێشنیارکراو
Embedded Condition-Monitoring System
ADS7825P fits embedded monitoring equipment that periodically checks four analog condition channels and stores the resulting codes for analysis. The 25 microsecond maximum conversion time permits rapid channel scans, and the serial output option reduces wiring in distributed monitoring nodes. Power-down operation reduces consumption to 50 microwatts when continuous conversion is unnecessary, making it useful for duty-cycled installations. Choose a host controller with a compatible serial or parallel interface, and account for settling time, reference behavior, analog filtering, and calibration drift when interpreting the acquired measurements.
پێشنیارکراو
Mixed-Signal Control Board
ADS7825P can serve the analog measurement section of a mixed-signal control board containing an embedded processor and precision peripherals. The converter's parallel or serial data output lets the design team balance transfer rate against connector and routing complexity. Four analog inputs support shared sampling, while the single plus 5 V supply simplifies the digital interface domain. At 50 mW maximum power dissipation, the device adds manageable heat for a through-hole industrial design, although the complete board still requires careful grounding and return-current planning to preserve the converter's specified accuracy.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ ADS7825P — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە |
|---|---|
| Resolution | 16 bit |
| Input Channels | 4 channels |
| Sampling and Conversion Time | 25 us maximum |
| Integral Nonlinearity | plus or minus 2.0 LSB maximum |
| Input Range | plus or minus 10 V |
| Supply | plus 5 V |
| Power Dissipation | 50 mW maximum |
| Data Interface | Parallel or serial |
| Package | 28-pin 0.3-inch PDIP |
| Brand | Texas Instruments |
تێبینییەکانی دیزاین
Route analog input and reference connections away from digital clock and parallel-data nets, and keep the return path continuous beneath the converter and its support components. Follow the manufacturer layout and pin-description tables when assigning the 28-pin PDIP footprint. Place input filtering and protection components near the corresponding pins, and avoid sharing narrow return paths with switching-regulator or high-current output currents.
Treat the four analog channels as precision measurement inputs. Use the manufacturer-recommended source impedance and acquisition timing, and account for capacitor settling before the sample-and-hold interval. If the source impedance is high, add a suitable low-noise buffer close to the converter rather than relying on long PCB traces. External filters must preserve the required signal bandwidth while rejecting coupled noise.
Decouple the single plus 5 V supply at the converter with the capacitance and placement specified by Texas Instruments. Keep the analog and digital return currents controlled so regulator current does not share an impedance in series with the converter ground. The device dissipates no more than 50 mW during normal conversion and enters a 50 microwatt power-down state when continuous operation is unnecessary.
Do not treat a family member with the same pin count as an automatic replacement. The manufacturer states that ADS7825 is pin-compatible with ADS7824, but pin compatibility does not guarantee matching resolution or conversion performance. Likewise, the 8-bit AD7825 is not equivalent to the 16-bit ADS7825P. Confirm input range, output coding, timing, reference behavior, control pins, and every physical pin before approving a substitution.
زانیاری پابەندبوون
Compliance status was not stated in the manufacturer or distributor content used for this record and must be confirmed from the current manufacturer documentation before qualification.