Analog Devices

ADSP-2115BS-80 - 16-Bit 20 MHz DSP, 80-Pin PQFP | Analog Devices

MPN: ADSP-2115BS-80 ✓ چالاک
5 V Vdss 80-pin PQFP Package 20 MHz Speed On-chip RAM Memory
MOQ: 1 |

ADSP-2115BS-80 گشتی

The Analog Devices ADSP-2115BS-80 is a 16-bit fixed-point digital signal processor microcomputer built for high-speed numeric processing. The device operates at 20 MHz, delivers 20 MIPS, and uses a single 5 V supply according to the manufacturer’s ADSP-2115 family documentation and distributor specifications. It is packaged in an 80-pin PQFP, providing a conventional surface-mount footprint for DSP control, audio, communications, and industrial signal-processing systems.

A digital signal processor, or DSP, is a microprocessor architecture optimized for filtering, transforms, waveform generation, and other operations involving repeated numerical calculations. The ADSP-2115 belongs to the ADSP-2100 family, where an enhanced Harvard architecture separates instruction, program-memory, and data-memory access into independent buses. This architecture helps sustain predictable instruction throughput for real-time signal-processing workloads.

The ADSP-2115BS-80 combines a 16-bit fixed-point DSP core with arithmetic units, data address generators, a program sequencer, on-chip memory, a programmable timer, and serial-port resources. The verified product description identifies one serial port, while the common ADSP-21xx core combines computation units, dual data address generators, and a program sequencer. Its 20 MHz clock and 20 MIPS processing rate make it suitable for embedded DSP functions that require deterministic numeric throughput without a high-end digital signal processor.

The ADSP-2100 family architecture supports single-cycle instruction execution and is intended for audio, communications, industrial control, instrumentation, and other high-speed signal-processing applications. The ADSP-2115 variant differentiates itself through on-chip program and data memory RAM, a programmable timer, and one serial port. Designers should use the ADSP-2115 family datasheet for memory sizes, clock requirements, pin assignments, electrical limits, and peripheral configuration.

Because this processor is a fixed-point DSP rather than a general-purpose microcontroller, software and firmware should be evaluated for numerical scaling, interrupt latency, serial-interface bandwidth, and memory bandwidth. The 80-pin PQFP package is larger than many modern leadless packages, but it remains useful when a legacy board design requires the established ADSP-2115 pinout or when a new design prioritizes straightforward inspection and rework.

A practical design review should verify the clock source, decoupling, reset behavior, serial-port connections, and the complete 80-pin footprint against the manufacturer’s ADSP-2115 datasheet. Keep analog and digital return paths controlled, place bypass capacitors close to the supply pins, and validate signal timing at the system clock. Use the Request a Quote form on this page for current sourcing, price, and lead-time information.

This product summary combines the manufacturer product information with practical packaging, application, replacement, and PCB-placement guidance. It is intended to help engineers identify whether the ADSP-2115BS-80 matches an existing 16-bit, 20 MIPS DSP design before committing to a schematic or PCB revision.

جێگرەوەکانی جێگۆڕکێ بۆ ADSP-2115BS-80 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADSP-2115BS-80 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Mounting Type, Package, Supply Voltage.

Analog Devices
Mounting Type: Surface Mount (CQFP)
Package: 240-CQFP (32x32 mm) with exposed heat slug
Supply Voltage: 3.3 V (industrial "L" variant)
بەراوردکردن لەگەڵ ADSP-2115BS-80 →

هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.

داوای جێگرەوەکان بکە

ADSP-2115BS-80 تایبەتمەندییەکان

Device Type 16-bit fixed-point digital signal processor
Processor Architecture Enhanced Harvard architecture
Clock Frequency 20 MHz
Processing Rate 20 MIPS
Word Size 16 bit
ڤۆڵتیەی دابینکردن 5 V
Serial Port Count 1
Instruction Buses 1
Data Buses 2
Computation Units ALU, multiplier/accumulator, and shifter
Data Address Generators 2
Program Sequencer 1
Program Memory On-chip RAM
Data Memory On-chip RAM
Programmable Timer 1
پاکێج 80-pin PQFP
جۆری دامەزراندن Surface mount

ڕێنمایی ڕێکخستنی پینی ADSP-2115BS-80 80-pin pqfp

ڕێکخستنی پین بۆ ADSP-2115BS-80 (پاکێجی 80-pin pqfp). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی 80-pin pqfp بۆ ADSP-2115BS-80

هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADSP-2115BS-80.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

ADSP-2115BS-80 گونجاوە بۆ 6 بەکارھێنانs: Audio Filtering and Equalization, Industrial Vibration Analysis, Communications Signal Conditioning, Instrumentation and Measurement, Motor and Motion Control, Portable Sensor Processing.

🎧

Audio Filtering and Equalization

The ADSP-2115BS-80 fits real-time audio filtering, equalization, and mixing because its 16-bit fixed-point DSP core combines 20 MHz clocking with 20 MIPS throughput. The enhanced Harvard architecture and dual data buses support parallel movement of audio samples and coefficients, while the ALU, multiplier/accumulator, and shifter map naturally to FIR and IIR calculations. Place the processor in the signal chain after the audio serial interface and before the output stage. Firmware must include fixed-point scaling, saturation, and coefficient-headroom analysis; otherwise numerical precision can degrade during high gain or dense filtering.

🏭

Industrial Vibration Analysis

The ADSP-2115BS-80 is appropriate for machinery monitoring that requires deterministic filtering and numeric feature extraction from sampled vibration data. Its 20 MIPS rate supports fixed-point filtering and analysis loops, while the separate instruction and data buses help maintain data flow during multiply-accumulate operations. Use the serial port for a sensor or converter interface and the on-chip RAM for working buffers. Validate the input sample rate, coefficient precision, block latency, and interrupt budget before using it for alarm decisions, because a real-time analysis path must finish each processing interval without missed samples.

🌐

Communications Signal Conditioning

The ADSP-2115BS-80 can implement communications signal-conditioning functions such as filtering, modulation support, and spectrum-related numeric operations within a 20 MIPS processing budget. Its enhanced Harvard architecture separates instruction traffic from program and data access, which is valuable in repeated block-processing loops. The single serial port can connect to a companion converter or transceiver, subject to throughput limits. Designers should calculate required samples per second, serial-word rate, interrupt frequency, and memory bandwidth, and should use fixed-point scaling analysis to avoid overflow under the expected dynamic range.

🖥️

Instrumentation and Measurement

The ADSP-2115BS-80 suits embedded measurement instruments that must acquire samples, execute numeric transforms, and deliver processed results in real time. Its 20 MHz clock and 20 MIPS throughput provide a clear baseline for filters, calibration arithmetic, FFT-oriented loops, and custom sensor algorithms. The dedicated computation units reduce the burden of repeated multiply-accumulate work compared with a general-purpose processor. Use the single serial port for a precision converter interface or control link, and confirm timing headroom for display updates and host communication so background tasks do not disrupt the primary sampling schedule.

🏭

Motor and Motion Control

The ADSP-2115BS-80 can execute fixed-point control algorithms in motor, positioning, and motion-control subsystems where deterministic numeric computation is required. Its 20 MIPS rate supports proportional, integral, derivative, state-machine, and filtering operations when the control loop is modest, while the enhanced Harvard architecture keeps program and data access organized. Connect the processor to external power-stage or interface circuitry through suitable isolation and signal-conditioning components. The control period, execution jitter, and serial or timer update rate must be checked carefully because DSP throughput alone does not guarantee safe actuator timing.

🧩

Portable Sensor Processing

The ADSP-2115BS-80 can serve as the signal-processing core in a compact sensor module that performs local filtering or classification before transmitting results. Its 20 MIPS throughput and dedicated arithmetic units allow useful fixed-point processing close to the sensor, reducing the need to send every raw sample to a host. On-chip RAM supports working data and coefficient storage, while the 80-pin PQFP is relatively large for a miniaturized enclosure. Layout should prioritize short clock and return paths, controlled supply routing, and accessible programming/debug connections so that compact placement does not compromise serviceability.

What is the ADSP-2115BS-80?
The ADSP-2115BS-80 is a 16-bit fixed-point digital signal processor microcomputer from Analog Devices. It runs at 20 MHz, provides 20 MIPS of processing throughput, operates from a 5 V supply, and is packaged in an 80-pin PQFP. According to the Analog Devices ADSP-2115 datasheet, the processor belongs to the ADSP-2100 family and uses an enhanced Harvard architecture with separate instruction and dual data buses.
What are the key specifications of ADSP-2115BS-80 that engineers should know?
The ADSP-2115BS-80 combines a 16-bit fixed-point DSP core, 20 MHz clock, 20 MIPS throughput, 5 V operation, and one serial port in an 80-pin PQFP. According to the ADSP-2115 family datasheet, the core includes an ALU, multiplier/accumulator, shifter, dual data address generators, and a program sequencer. Its enhanced Harvard architecture separates instruction access from program and data memory traffic, supporting deterministic real-time processing.
What is the ADSP-2115BS-80 clock speed and processing rate?
The ADSP-2115BS-80 has a 20 MHz clock frequency and a processing rate of 20 MIPS. The manufacturer’s ADSP-2115 family documentation describes the device as a high-speed numeric processor, while distributor specifications identify the 16-bit fixed-point implementation and 20 MHz operating frequency. These figures establish the baseline throughput for audio, communications, and embedded DSP signal-processing designs.
What package does ADSP-2115BS-80 use?
The ADSP-2115BS-80 uses an 80-pin PQFP surface-mount package. Distributor listings describe the package as 80-pin PQFP, QFP-80, or metric plastic QFP-80. For a new layout, use the manufacturer’s ADSP-2115 datasheet for the complete footprint, pin numbering, and dimensions rather than relying on a generic QFP-80 library symbol.
Where can I download the ADSP-2115BS-80 datasheet PDF?
The official ADSP-2115 datasheet PDF is available from Analog Devices at the manufacturer URL recorded for this product. The document covers the ADSP-2100 family architecture, ADSP-2115-specific resources, electrical characteristics, and package information. Use that manufacturer document as the controlling reference for pinout, memory, clocking, serial interfaces, and operating limits.
Where can I find the ADSP-2115BS-80 pinout?
The ADSP-2115BS-80 pinout is defined in the pin-description section of the Analog Devices ADSP-2115 datasheet. The exact 80-pin arrangement should be transcribed from the package drawing because the PQFP footprint includes more than 32 leads and includes dedicated power, ground, clock, reset, serial, and bus signals. Confirm the physical orientation and exposed thermal treatment against the manufacturer package information.
Can ADSP-2115BS-80 be used for audio DSP?
Yes, the ADSP-2115BS-80 is suitable for many real-time audio DSP functions. Its 16-bit fixed-point architecture, 20 MHz clock, 20 MIPS throughput, dual data buses, and on-chip RAM suit filtering, mixing, equalization, and control algorithms. The design must account for fixed-point scaling and the bandwidth of the single serial port, using the manufacturer’s DSP algorithms and reference implementations as a starting point.
Is ADSP-2115BS-80 suitable for communications signal processing?
The ADSP-2115BS-80 can support communications signal processing when the required throughput, memory, and serial bandwidth fit the device architecture. Its 20 MIPS processing rate and independent data buses are useful for filtering and real-time numeric operations. Verify the required sample rate, serial-port throughput, clock tolerance, and protocol timing against the ADSP-2115 datasheet before finalizing the design.
When should I choose ADSP-2115BS-80 over a general-purpose microcontroller?
Choose the ADSP-2115BS-80 when the application requires sustained fixed-point DSP operations, separate data paths, or predictable high-speed numeric processing. Its 20 MIPS rate and dedicated arithmetic units are more directly aligned with filtering and waveform-processing workloads than a general-purpose MCU. Prefer a microcontroller when the product mainly performs control, communications, and conventional peripheral tasks with limited DSP demand.
What is the difference between ADSP-2115BS-80 and ADSP-2115?
ADSP-2115BS-80 identifies the 80-pin PQFP ordering configuration of the ADSP-2115 processor family. The ADSP-2115 name identifies the underlying device, while the suffix specifies a package, speed, temperature, or ordering option according to the manufacturer’s ordering table. Use the ADSP-2115 datasheet ordering information to confirm every suffix attribute before treating another ADSP-2115 orderable part as interchangeable.
Is ADSP-2115BS-80 the same as ADSP-2181BSTZ-133?
No. The ADSP-2181BSTZ-133 and ADSP-2115BS-80 belong to different ADSP processor families and use different package formats; the cross-reference information identifies them as comparison candidates rather than drop-in equivalents. The ADSP-2115BS-80 is an 80-pin PQFP part, while the ADSP-2181BSTZ-133 uses the STZ package designation. A board replacement requires complete pin, clock, memory, voltage, and peripheral verification.
What is the best drop-in replacement for ADSP-2115BS-80?
No verified drop-in replacement can be selected from the available cross-reference information. ADSP-2181BSTZ-133 and ADSP-21060-family comparisons are not pin-compatible with the 80-pin PQFP ADSP-2115BS-80. Treat any proposed substitution as a redesign candidate until its 80-pin footprint, 5 V supply, 20 MHz clock, memory map, serial interface, and software model are verified against the original design.
What can replace ADSP-2115BS-80?
A confirmed drop-in replacement for the ADSP-2115BS-80 is not established by the available cross-reference information. The processor’s 80-pin PQFP footprint, enhanced Harvard architecture, on-chip memory, serial port, and legacy software environment make package naming alone insufficient for equivalence. Any replacement should undergo pin-by-pin electrical comparison, timing validation, firmware review, and system-level signal testing.
How do I power and decouple the ADSP-2115BS-80?
The ADSP-2115BS-80 operates from a 5 V supply. Place the required bypass capacitors close to the power and ground pins, follow the manufacturer’s recommended decoupling network, and provide a clean clock source that meets the timing specifications. PCB return paths and supply routing should minimize switching noise because digital DSP performance can be affected by clock jitter and supply disturbance.
Where can I buy ADSP-2115BS-80 and check its price and lead time?
Use the Request a Quote form on this page to request the current ADSP-2115BS-80 price, stock status, lead time, and order quantity. The product is an Analog Devices 80-pin PQFP DSP, so quote requests should include the exact MPN, target quantity, delivery location, and any required date. Do not substitute a different ADSP-2115 suffix without checking the manufacturer’s ordering table.
Is ADSP-2115BS-80 currently active and suitable for new designs?
Analog Devices lists the ADSP-2115 as a current product family, and the manufacturer provides an official product page and ADSP-2115 datasheet. The exact ADSP-2115BS-80 ordering configuration should be confirmed for availability and lifecycle status when placing an order. Request the current lifecycle, stock, and lead-time information through the Request a Quote form on this page.
What compliance information applies to ADSP-2115BS-80?
The ADSP-2115BS-80 is an Analog Devices integrated circuit, but its RoHS, REACH, halogen-free, and conflict-minerals status must be confirmed from the exact orderable-part documentation and current supplier declaration. These compliance claims should not be inferred from the processor family alone. Request the manufacturer or distributor compliance documentation for the exact ADSP-2115BS-80 configuration.

داتای سەرچاوەی ئەندازیاری بۆ ADSP-2115BS-80 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the ADSP-2115BS-80 when a design needs a 16-bit fixed-point processor delivering 20 MIPS at 20 MHz and is built around the ADSP-2100 family architecture. It is particularly appropriate for real-time filtering, communications signal conditioning, industrial measurement, and compact embedded signal-processing systems. The 80-pin PQFP package supports legacy-style surface-mount designs but occupies more board area than contemporary leadless packages. ADSP-2181BSTZ-133 and ADSP-21060-family devices may appear in comparison searches, yet they use different package formats and processor architectures, so they are not drop-in replacements. For an existing ADSP-2115 board, retain the exact ordering configuration unless the manufacturer confirms another suffix has identical electrical, pin, memory, and thermal characteristics.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە
Package 80-pin PQFP
Brand Analog Devices
Processor Type 16-bit fixed-point DSP microcomputer
Clock Frequency 20 MHz
Processing Rate 20 MIPS
Supply Voltage 5 V
Serial Ports 1
Architecture Enhanced Harvard architecture with one instruction bus and two data buses

جیاکەرەوە سەرەکییەکان

  • Dedicated DSP execution architecture (بەراورد بەADSP-2181BSTZ-133)
  • Legacy-compatible 80-pin PQFP footprint (بەراورد بەADSP-21060LCW-160)
  • Integrated signal-processing resources (بەراورد بەADSP-21060CZ-160)

تێبینییەکانی دیزاین

The ADSP-2115BS-80 operates from a 5 V supply. Use the manufacturer’s recommended pin-specific bypass network and place each capacitor immediately between the relevant power and ground pins. Keep the clock supply return within the same quiet distribution region and avoid routing high-current switching paths beneath the device. Review voltage tolerance, startup sequencing, and supply ramp behavior against the ADSP-2115 datasheet before fabrication.

Route the 20 MHz clock as a short, continuous path with a controlled return and avoid stubs or unnecessary test-point discontinuities. Place the clock source and decoupling at the driver end when practical, and keep analog and digital grounds joined according to the manufacturer’s recommended layout. The 80-pin PQFP footprint requires careful orientation because incorrect numbering can produce a board that cannot be reworked reliably.

Validate the serial-port timing and signal integrity at the intended clock and cable or board-loading conditions. Use controlled-impedance routing where the interface specification requires it, and keep return paths continuous. For external converter connections, account for skew, setup time, hold time, and possible bus contention. The one-serial-port architecture should be checked against simultaneous audio, control, and status traffic to prevent bandwidth contention.

Do not assume that another ADSP-2115 suffix is automatically interchangeable. Verify the exact package, temperature grade, speed grade, supply requirements, and ordering code. Also review fixed-point algorithms for scaling and overflow, especially when filter coefficients amplify intermediate values. Legacy software may depend on memory-map and peripheral details, so firmware should be rebuilt and regression-tested rather than copied without review.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

Compliance declarations were not identified for the exact ADSP-2115BS-80 ordering configuration. Obtain current documentation for the exact MPN.

داتا پشتڕاستکراوەتەوە لە: 2026-11-04 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

ADSP-2115BS-80 datasheet ADSP-2115BS-80 specifications ADSP-2115BS-80 pinout ADSP-2115BS-80 datasheet pdf ADSP-2115BS-80 equivalent ADSP-2115BS-80 replacement ADSP-2115BS-80 vs ADSP-2181BSTZ-133 ADSP-2115BS-80 vs ADSP-21060LCW-160 ADSP-2115BS-80 price ADSP-2115BS-80 stock Analog Devices ADSP-2115BS-80 ADSP-2115BS-80 20 MHz DSP ADSP-2115BS-80 80 pin PQFP ADSP-2115BS-80 audio DSP ADSP-2115BS-80 industrial signal processing

پێکهاتە و زاراوە پەیوەندیدارەکان

Analog Devices ADSP-2115BS-80 ADSP-2115 ADSP-2100 family ADSP-2181BSTZ-133 ADSP-21060LCW-160 ADSP-21060CZ-160 digital signal processor DSP fixed-point processor enhanced Harvard architecture ALU multiplier/accumulator data address generator program sequencer 16-bit word size 20 MHz clock 20 MIPS throughput 5 V power supply serial port program RAM data RAM 80-pin PQFP PQFP package family surface-mount package real-time signal processing
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ