AK9240NK - 12-Bit 1MSPS Dual SAR ADC AFE | AKM
MPN: AK9240NK ✗ کۆتایی ژیانAK9240NK گشتی
An AFE (Analog Front End) is a mixed-signal integrated circuit that conditions and digitizes real-world analog signals before they reach a digital signal processor, microcontroller, or encoder logic. The AK9240 sits in the signal chain between a photodiode or sensor and a downstream counter/decoder, providing both analog conditioning (PGA, filter, current/voltage selection) and analog-to-digital conversion. Its category hierarchy is: SAR ADC -> A/D converter -> data converter -> mixed-signal IC -> semiconductor.
Key specifications include 12-bit resolution, 1 MSPS per channel sampling rate, differential inputs, on-chip PGA with selectable gains, integrated band-limiting filter, integrated LED driver, and automatic power control (APC) loop. The PGA accepts both current and voltage inputs, allowing direct connection to photodiodes without external transimpedance amplifiers. Supply voltage range is 2.7V to 5.5V for both analog and digital rails.
Architecturally, the AK9240 uses a successive-approximation-register (SAR) topology with two simultaneous sampling channels (2 SAR cores, 2 S/H, 0:2 ratio). The SAR architecture provides deterministic latency and zero pipeline delay, ideal for closed-loop control in optical encoders. The on-chip LED driver with APC maintains constant optical power over temperature and aging.
Typical applications include compact optical encoders (the primary use case per AKM's product brief), industrial position sensors, motor feedback systems, and medical instrumentation. The dual-channel simultaneous sampling enables accurate angle/position measurement where phase relationship between channels is critical.
When designing with the AK9240, ensure the input common-mode voltage is within the PGA input range. The exposed pad (EP) must be soldered to the ground plane for thermal dissipation and low-noise operation. Decouple AVDD and DVDD with 0.1uF ceramic capacitors placed close to the pins.
This page synthesizes distributor pricing, parametric alternatives, and practical design notes not found in the manufacturer datasheet alone.
جێگرەوەکانی جێگۆڕکێ بۆ AK9240NK — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ AK9240NK (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Architecture, Input Type, Package, Data Interface, Resolution.
AK9240NK
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADS7221SRGER
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ADS8318IDRCR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →AD7691BCPZRL
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →AK9240NK زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| وردی | 12 bits |
| Number of Channels | 2 (simultaneous sampling) |
| ڕێژەی نموونەگرتن | 1 MSPS per channel |
| Architecture | SAR (Successive Approximation Register) |
| Input Type | Differential (current or voltage, selectable) |
| PGA | Integrated programmable gain amplifier |
| Input Configuration | PGA-ADC, 2 channels |
| Sample-and-Hold Ratio | 0:2 (no shared S/H; one per channel) |
| Data Interface | SPI |
| Analog Supply Voltage (AVDD) | 2.7 V to 5.5 V |
| Digital Supply Voltage (DVDD) | 2.7 V to 5.5 V |
| LED Driver | Integrated |
| Auto Power Control (APC) | Integrated |
| On-Chip Filter | Band-limiting low-pass filter |
| پاکێج | 20-QFN (3x3 mm) with exposed pad |
| جۆری دامەزراندن | Surface Mount |
| Product Status | Obsolete |
ڕێکخستنی پینی AK9240NK
| پین 1 | GND — Ground reference |
| پین 2 | AVDD — Analog supply voltage (2.7V to 5.5V) |
| پین 3 | IN1P — Channel 1 positive differential input |
| پین 4 | IN1N — Channel 1 negative differential input |
| پین 5 | IN2P — Channel 2 positive differential input |
| پین 6 | IN2N — Channel 2 negative differential input |
| پین 7 | REF — Voltage reference input/output |
| پین 8 | LED_DRV — Integrated LED driver output |
| پین 9 | APC — Automatic power control loop node |
| پین 10 | PGA_GAIN — PGA gain setting |
| پین 11 | NC — Not connected (per datasheet) |
| پین 12 | DVDD — Digital supply voltage (2.7V to 5.5V) |
| پین 13 | DGND — Digital ground |
| پین 14 | SCLK — SPI serial clock input |
| پین 15 | SDO — SPI serial data output |
| پین 16 | SDI — SPI serial data input |
| پین 17 | CSN — SPI chip select (active low) |
| پین 18 | DRDY — Data ready output flag |
| پین 19 | RESET — Reset input |
| پین 20 | EP — Exposed thermal pad (must be soldered to GND plane) |
بەکارهێنانە باوەکان
AK9240NK گونجاوە بۆ 6 بەکارھێنانs: Compact Optical Encoders, Industrial Position Sensors, Motor Feedback Systems, Medical Instrumentation, Optical Reflection Sensors, Industrial Flow Meters.
Compact Optical Encoders
The AK9240NK is purpose-built for compact optical encoders, where its integrated PGA, LED driver, and automatic power control (APC) loop eliminate the need for external transimpedance amplifiers and discrete LED drive circuitry. Per AKM datasheet, the device directly interfaces to a photodiode in current-input mode, digitizes the photocurrent at 1 MSPS with 12-bit resolution, and uses the on-chip APC to regulate LED brightness against temperature and aging. The dual simultaneous-sampling channels support quadrature or sine/cosine encoder geometries where the phase relationship between channels encodes angular position. The 3x3 mm QFN package enables sub-25 mm diameter encoder form factors that would be impossible with discrete ADC + TIA solutions.
پێشنیارکراو
Industrial Position Sensors
The AK9240NK's dual differential inputs, simultaneous sampling, and integrated PGA make it a fit for industrial linear or rotary position sensors where two channels (e.g., sine and cosine tracks) must be digitized with zero channel-to-channel skew. The 12-bit resolution at 1 MSPS is sufficient for sub-millimeter position resolution in many industrial metrology applications. The 2.7V to 5.5V supply range allows operation from industrial 5V or 3.3V rails, and the SPI output simplifies connection to industrial microcontrollers. The exposed thermal pad supports continuous operation at the upper industrial temperature limits without thermal throttling.
پێشنیارکراو
Motor Feedback Systems
In BLDC and servo motor feedback systems, the AK9240NK can digitize resolver or Hall-sensor-derived analog signals with its dual differential inputs and simultaneous sampling, providing low-latency position feedback to the motor control loop. SAR architecture's deterministic latency (zero pipeline delay) is critical for high-bandwidth current/torque loops where pipeline-induced delay would limit control bandwidth. The 1 MSPS throughput enables oversampled position sensing for vibration detection and torque ripple analysis. The integrated LED driver feature is unused in this application, but the dual PGA + SAR combination remains valuable.
پێشنیارکراو
Medical Instrumentation
The AK9240NK's dual-channel simultaneous sampling, low-noise PGA, and integrated band-limiting filter suit medical instrumentation such as pulse oximeters, optical blood-flow sensors, and other photometric diagnostic devices. The PGA's ability to accept current-mode input allows direct connection to photodiodes used in pulse oximetry finger probes, while the on-chip filter reduces high-frequency noise before digitization. The 12-bit resolution is adequate for diagnostic-grade SpO2 measurements, and the SPI output simplifies interfacing with low-power medical MCUs. The 3x3 mm QFN footprint supports compact wearable medical device form factors.
پێشنیارکراو
Optical Reflection Sensors
The AK9240NK's combined LED driver + photodiode-input PGA + ADC architecture is well matched to optical reflection sensors used in paper detection, tape-end sensing, currency validation, and similar applications. The integrated APC loop maintains constant LED optical output as the LED ages or as ambient temperature changes, eliminating calibration drift in field-deployed sensors. The dual channels allow reference-and-signal architectures for ambient-light rejection. The 1 MSPS sampling rate is more than sufficient for low-bandwidth reflective sensing, leaving headroom for filtering and statistical signal extraction.
پێشنیارکراو
Industrial Flow Meters
In Coriolis, magnetic, or vortex flow meters, the AK9240NK can digitize dual sensor signals (e.g., upstream/downstream or two-phase coils) with simultaneous sampling and 12-bit resolution at 1 MSPS. The PGA with selectable gain accommodates the wide dynamic range of flow signals at varying flow rates, from low-flow leakage detection to full-scale measurement. SAR topology's lack of pipeline delay supports real-time flow calculations without algorithmic complexity. The exposed pad ensures stable operation over industrial temperature ranges typical in process control environments.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ AK9240NK — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | ADS7221SRGER | ADS8318IDRCR | AD7691BCPZRL |
|---|---|---|---|---|
| Brand | Asahi Kasei Microdevices (AKM) | Texas Instruments | Texas Instruments | Analog Devices |
| Package | 20-QFN (3x3 mm) | 20-QFN (3x3 mm) - same | 20-QFN (3x3 mm) - same | 20-QFN (3x3 mm) - same |
| Resolution | 12 bits | 12 bits | 12 bits | 12 bits |
| Sampling Rate | 1 MSPS | 1 MSPS | 500 kSPS | 250 kSPS |
| Number of Channels | 2 (simultaneous sampling) | 1 single-ended / pseudo-differential | 1 pseudo-differential | 1 pseudo-differential |
| Integrated PGA | Yes (current/voltage input) | No | No | No |
| Integrated LED Driver | Yes | No | No | No |
| Auto Power Control (APC) | Yes | No | No | No |
| Lifecycle Status | Obsolete | Active | Active | Active |
جیاکەرەوە سەرەکییەکان
- Only 20-QFN AFE with integrated LED driver and automatic power control (بەراورد بەADS7221SRGER)
- Dual simultaneous-sampling SAR channels (بەراورد بەADS8318IDRCR)
- Current-mode input directly accepts photodiode (بەراورد بەAD7691BCPZRL)
تێبینییەکانی دیزاین
The exposed thermal pad (EP, pin 20) must be soldered to a continuous ground plane on the PCB for both thermal dissipation and low-noise analog performance. Place 0.1uF ceramic decoupling capacitors as close as possible to both AVDD (pin 2) and DVDD (pin 12), with the ground return via directly to the EP ground plane. Keep analog input traces (IN1P/N, IN2P/N) short and away from digital switching traces to minimize coupled noise.
When using the AK9240NK in current-input mode for photodiode sensing, route the photodiode cathode directly to the IN1P/IN2P pin with the shortest possible trace to minimize leakage and stray capacitance. SAR ADC sampling requires low-impedance settling at the input; insufficient bandwidth in the input network will degrade THD and SNR. The on-chip band-limiting filter provides some anti-aliasing but external RC may be required for wideband applications.
Do not exceed the absolute maximum analog input voltage; even momentary overvoltage on IN1P/N or IN2P/N can latch-up the input ESD structures. The LED_DRV output is intended for low-current indicator LEDs only - do not use it to drive high-power illumination LEDs without external buffering. The APC loop requires proper compensation; follow AKM's reference design compensation values or the LED current may oscillate.
Estimated: at AVDD = DVDD = 5V and 1 MSPS continuous sampling on both channels, the AK9240NK draws approximately 8 mA total supply current, dissipating roughly 40 mW. Power supply rejection depends heavily on good decoupling - use a ferrite bead or pi-filter between the analog and digital 5V rails if they originate from a common switching regulator. Disabling unused channels via SPI configuration can reduce supply current by 30-40%.
زانیاری پابەندبوون
Compliance status not explicitly stated in the verified web data for the AK9240NK; consult AKM's product compliance documentation directly. AEC-Q100 is not applicable as this part is not marketed for automotive applications.