APA150-TQ100 - 150K-Gate 180MHz FPGA | Microchip
MPN: APA150-TQ100 ✓ چالاکAPA150-TQ100 گشتی
An FPGA is a programmable digital semiconductor whose logic, memory, and I/O resources can be configured after fabrication. It belongs to the broader semiconductor and programmable-logic hierarchy while combining field programmability with several characteristics traditionally associated with application-specific integrated circuits. The ProASICPLUS family targets designs requiring deterministic configuration, reusable hardware, and a transition path from FPGA prototyping toward ASIC production.
The APA150-TQ100 provides 150,000 system gates, 6,144 FPGA cells, CMOS construction, and up to 180 MHz indicated operation. Its flash-based configuration supports reprogramming and allows the programmed design to become operational at power-up. The 100-LQFP package provides 100 physical pins on a 0.5 mm pitch, enabling use on conventional surface-mount PCB layouts rather than requiring a specialized fine-pitch land pattern.
Its architecture is intended for digital control, interface, and embedded processing designs where programmable logic can be connected to external memories or peripherals. ProASICPLUS devices support migration-oriented development practices, while the APA150 designation identifies the device within the 150,000-gate member of the family. Designers should treat advertised gate and frequency figures as device-level guidance and verify system timing against the manufacturer datasheet and the selected design tools.
Typical uses include PCI-compatible peripheral interfacing, embedded control logic, industrial automation, communications equipment, and compact test systems. In each case, the key engineering value is the combination of reprogrammable flash configuration, a 180 MHz performance target, and a 100-pin package suitable for moderate-complexity designs.
PCB planning should reserve all 100 package pins, including power and ground connections, and route high-speed or sensitive interfaces according to the manufacturer pin-assignment document. Use the board-support file and physical-pin map when assigning package pins so that software constraints, PCB constraints, and fabrication rules remain consistent.
This product overview combines the manufacturer's ProASICPLUS capabilities, exact package information, searchable ordering data, supported comparison parts, and practical PCB-planning guidance. It is intended to help engineers identify the correct device and plan a reliable implementation before detailed design work begins.
جێگرەوەکانی جێگۆڕکێ بۆ APA150-TQ100 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ APA150-TQ100 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, System Gates, External System Performance, Logic Cells, Operating Temperature.
APA150-TQ100I
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →APA150-TQG100I
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
APA150-TQ100A
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →APA150-TQ100 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | ProASICPLUS field-programmable gate array |
| System Gates | 150,000 gates |
| FPGA Cells | 6,144 cells |
| Maximum System Performance | 180 MHz |
| Logic Family | CMOS |
| Configuration Technology | Nonvolatile flash technology |
| Configuration Features | Reprogrammable and live at power-up |
| پاکێج | 100-LQFP |
| ژمارەی پین | 100 pins |
| Package Pitch | 0.5 mm |
| جۆری دامەزراندن | Surface mount |
| پلەی گەرمیی کارکردن | 0°C to 70°C |
| ڤۆڵتیەی دابینکردن | 2.5 V |
| Internal System Performance | Up to 350 MHz |
| External System Performance | Up to 150 MHz |
| PCI Support | 3.3 V, 32-bit PCI up to 50 MHz |
| Schmitt Trigger Option | Available |
ڕێنمایی ڕێکخستنی پینی APA150-TQ100 0.5 mm
ڕێکخستنی پین بۆ APA150-TQ100 (پاکێجی 0.5 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ APA150-TQ100.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
APA150-TQ100 گونجاوە بۆ 6 بەکارھێنانs: 32-Bit PCI Peripheral Interface, Industrial Automation Controller, Communications Protocol Bridge, Embedded Control Logic, Network Equipment Line Card, Programmable Test and Measurement Logic.
32-Bit PCI Peripheral Interface
The APA150-TQ100 fits a 32-bit PCI peripheral controller because the ProASICPLUS family supports 3.3 V PCI operation up to 50 MHz, while the device provides 150,000 system gates and an indicated 180 MHz system performance. Implement state machines, transaction handling, arbitration, and interface control in programmable logic. Use the manufacturer pin-assignment file to map PCI signals and complete timing verification against the target system clock.
پێشنیارکراو
Industrial Automation Controller
APA150-TQ100 is suitable for industrial automation logic that coordinates sensors, actuators, interlocks, and communication interfaces. Its 6,144 programmable cells and 150,000 system gates provide space for parallel control paths, while flash configuration permits firmware patterns to be updated without replacing the PCB. Keep timing-critical paths constrained and use the TQ100 board-support file to align resource assignments with the 100-pin LQFP layout.
پێشنیارکراو
Communications Protocol Bridge
The APA150-TQ100 can implement a programmable communications bridge when a design needs configurable parallel logic, buffering, and protocol conversion. The 150,000-gate device and 180 MHz indicated performance suit moderate-speed data paths, while nonvolatile flash supports field updates of the configuration. Engineers should budget timing margin for routing, constrain I/O standards in the design tools, and verify interface voltage requirements before PCB release.
پێشنیارکراو
Embedded Control Logic
APA150-TQ100 works well as an embedded control engine for sequencing, watchdog supervision, data acquisition, and peripheral arbitration. Its CMOS implementation, 6,144 cells, and live-at-power-up flash configuration allow the programmed controller to operate immediately after power application. Partition time-critical functions into dedicated logic paths, leave margin for external memory access, and apply the manufacturer's board constraints to maintain predictable implementation results.
پێشنیارکراو
Network Equipment Line Card
APA150-TQ100 is appropriate for moderate-complexity line-card functions such as packet classification, queue control, status aggregation, and backplane data conditioning. Its reprogrammable flash configuration enables design reuse and configuration updates, while the 100-LQFP package avoids a large fine-pitch BGA footprint. Confirm every pin's I/O standard and timing budget, and use short, controlled routing for high-speed or impedance-sensitive board interfaces.
پێشنیارکراو
Programmable Test and Measurement Logic
APA150-TQ100 can implement timing control, pattern generation, capture logic, and instrument-interface sequencing in a compact test system. The 150,000 system gates and 180 MHz indicated performance support moderate-complexity acquisition and control functions, while flash configuration allows test sequences to change between programs. Define acquisition paths as constraints in the development tools and account for setup, hold, skew, and external-instrument timing during system validation.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ APA150-TQ100 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | APA150-TQ100I | APA150-TQG100I | APA150-TQ100A |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-LQFP | 100-LQFP - same | 100-LQFP - same | 100-LQFP - same |
جیاکەرەوە سەرەکییەکان
- Directly documented package-compatible replacement (بەراورد بەAPA150-TQ100I)
- Equivalent resource set in the same 100-pin footprint (بەراورد بەAPA150-TQG100I)
- Commercial-temperature APA150 ordering option (بەراورد بەAPA150-TQ100A)
تێبینییەکانی دیزاین
Import the APA150-TQ100 board-support file before fixing the PCB footprint and logical pin assignments. The manufacturer file identifies AGND, AVDD, and configuration pins for the TQ100 package, helping prevent mismatches between design constraints and physical routing. Check all 100 connections, segregate power and ground pins as directed by the datasheet, and compare the land pattern with the official package drawing before fabrication.
Apply timing constraints to clocks, buses, and external interfaces even though the device is indicated for 180 MHz operation. The advertised frequency is a device capability rather than a guarantee that an arbitrary board layout will close timing. Constrain input and output delays, preserve clock margin, verify I/O standards against adjacent devices, and use controlled routing for any high-speed or impedance-sensitive interface.
Do not treat every APA150-TQ100 suffix as electrically identical. APA150-TQ100I and APA150-TQG100I appear in direct replacement comparisons, but the suffix can denote a different grade or ordering condition. Confirm the exact temperature range, qualification status, speed grade, and supply-voltage requirements in the manufacturer documentation. Update the board file, programming files, and procurement specification together when changing order codes.
زانیاری پابەندبوون
No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for this exact order code. AEC-Q100 status is marked not applicable because this is a programmable FPGA rather than an automotive-qualified device designation.