Microchip Technology

APA450-FG256 - 450K-Gate ProASICPLUS FPGA | Microchip

MPN: APA450-FG256 ✓ چالاک
2.3 V to 2.7 V Vdss 256-FPBGA Package 180 MHz Speed Not required for flash configuration Memory
MOQ: 1 |

APA450-FG256 گشتی

The Microchip APA450-FG256 is a ProASICPLUS flash-based field-programmable gate array providing 450,000 equivalent gates, 12,288 logic cells, 186 user I/O, and operation up to 180 MHz in a 256-FPBGA package measuring 17 mm by 17 mm. The device combines programmable logic with 108 Kb of block RAM and operates from a 2.3 V to 2.7 V core supply.

A field-programmable gate array, or FPGA, is a semiconductor device containing configurable logic blocks, programmable interconnect, and input/output resources. It belongs to the programmable-logic hierarchy between fixed-function logic devices and software-programmable processors. Because its configuration is stored in nonvolatile flash memory, the ProASICPLUS family can retain its programmed logic without a continuously powered configuration memory.

The APA450-FG256 provides 450,000 equivalent gates in a 256-ball package, supporting designs that require substantially more logic than small CPLDs. Its 186 I/O positions permit interfaces to memory, converters, communications transceivers, control signals, and industrial peripherals. A maximum clock frequency of 180 MHz gives the design a practical performance target for bus control, instrumentation, embedded control, and general-purpose logic consolidation.

The 2.3 V to 2.7 V operating range simplifies power architecture when the surrounding system already uses a 2.5 V rail. Flash-based configuration offers deterministic nonvolatile operation after programming, while the dedicated block RAM supports buffering, data tables, packet staging, and general state-holding functions. Unlike a mask-programmed ASIC, the same FPGA family can support design revisions and configurable logic changes without changing the integrated-circuit mask.

Typical uses include industrial automation controllers, data-acquisition systems, communication line interfaces, embedded protocol bridges, test-and-measurement logic, and low-latency peripheral control. In each case, the device can consolidate discrete counters, state machines, interfaces, and control functions into one programmable package. Designers should still verify timing, voltage levels, supported I/O standards, and pin constraints against the complete design before schematic release.

Power and signal-integrity design require careful treatment of the 256-FPBGA footprint. Place all required bypass capacitors close to the associated supply pins, maintain continuous return paths beneath supply planes, and assign expandable I/O only after the PCB layer stack and routing budget are fixed. Because the package is large and dense, simulation, timing closure, and manufacturing-rule review are especially important before fabrication.

This page combines the device's 450,000-gate architecture, 180 MHz performance target, 186 I/O, memory capability, package details, comparison data, and practical implementation guidance. It also distinguishes temperature-grade and family ordering options from true cross-manufacturer drop-in equivalents, helping engineers narrow the replacement search without assuming that a similar package guarantees identical pin compatibility.

جێگرەوەکانی جێگۆڕکێ بۆ APA450-FG256 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ APA450-FG256 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package.

Microchip Technology
Package: 256-ball LBGA (FG256)
بەراوردکردن لەگەڵ APA450-FG256 →

APA450-FG256I

✅ جێگرەوەی ڕاستەوخۆ
📦 256-FPBGA
Same 450,000-gate ProASICPLUS architecture and 256-FPBGA footprint; the I suffix identifies a different temperature-grade option, with 0% difference in stated equivalent-gate capacity.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

APA450-FG256A

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 256-FPBGA
ProASICPLUS flash-based FPGA · 450,000 gates · 110,592 gates · 12,288 cells · 186 I/O · Nonvolatile Flash · 180 MHz · 2.375 V to 2.625 V

پەیوەندی بۆ نرخ

بینینی داتاشیت →

APA450-FGG256

✅ جێگرەوەی ڕاستەوخۆ
📦 256-FPBGA
Same 450,000-equivalent-gate ProASICPLUS family and 256-FPBGA format; the additional G suffix denotes a related ordering option, with 0% difference in stated gate capacity.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

APA450-FGG256I

✅ جێگرەوەی ڕاستەوخۆ
📦 256-FPBGA
Same 450,000-equivalent-gate family and 256-FPBGA format with an I temperature-grade suffix; gate capacity differs by 0%, while qualification options differ.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

APA450-FFG256

✅ جێگرەوەی ڕاستەوخۆ
📦 256-FPBGA
Same APA450 ProASICPLUS family with 450,000 equivalent gates and a 256-ball package; the FFG256 ordering option differs in suffix code, with 0% difference in stated gate capacity.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

APA450-FG256 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Equivalent Gate Count 450,000 gates
Logic Cell Count 12,288 cells
زۆرترین فرێکوێنسیی کاتژمێر 180 MHz
User I/O Count 186 I/O
Block RAM 108 Kb
Core Supply Voltage Range 2.3 V to 2.7 V
Configuration Technology Nonvolatile flash
Device Type ProASICPLUS FPGA
Programmable Logic Type FPGA
پاکێج 256-FPBGA
Package Dimensions 17 mm x 17 mm
Package Ball Count 256 balls
Ball Pitch 1 mm
جۆری دامەزراندن Surface mount
دۆخی RoHS Compliant
Lead-Free Status Lead-free
External Configuration Memory Not required for flash configuration

ڕێنمایی ڕێکخستنی پینی APA450-FG256 256 balls

ڕێکخستنی پین بۆ APA450-FG256 (پاکێجی 256 balls). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 256 balls بۆ APA450-FG256

هیچ داتای وردی پینئاوت بەردەست نییە بۆ APA450-FG256.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

APA450-FG256 گونجاوە بۆ 6 بەکارھێنانs: Industrial Automation Controller, Data-Acquisition and Signal Conditioning, Communication Protocol Bridge, Test and Measurement Instrumentation, Embedded Peripheral Control, Secure Device Authentication and Control.

🏭

Industrial Automation Controller

The APA450-FG256 fits industrial automation controllers that combine sequential control, data acquisition, status monitoring, and communications logic. Its 12,288 logic cells and 450,000 equivalent gates provide room for multiple state machines and protocol engines, while 186 I/O support encoders, discrete controls, and external bus transceivers. The 180 MHz maximum clock permits time-sensitive control processing, and flash configuration allows the controller to retain its logic through power cycles. Keep supply decoupling close to the 256-FPBGA power balls and validate timing against the actual industrial control-cycle requirements.

📊

Data-Acquisition and Signal Conditioning

The APA450-FG256 can implement acquisition sequencing, digital filtering, channel control, and data buffering in a single programmable-logic device. Its 108 Kb of block RAM provides local storage for sampled data and trigger records, while 186 I/O accommodate converters, clocks, and control signals. The 2.3 V to 2.7 V operating range supports systems built around a 2.5 V rail, although each external interface must match its own voltage domain. Engineers should budget timing margin for acquisition clocks and route high-speed signals with controlled impedance.

🌐

Communication Protocol Bridge

The APA450-FG256 is suitable for protocol bridging when a system must translate between multiple serial interfaces or manage framed data in real time. Its 450,000-equivalent-gate capacity supports parallel transmit and receive engines, while 108 Kb of block RAM can hold packet buffers, descriptors, and timing thresholds. The 186 available I/O simplify connections to transceivers and control logic, and the 180 MHz clock target supports common synchronous interface rates. Validate pin assignments, clock-domain relationships, and I/O voltage limits before schematic signoff.

🖥️

Test and Measurement Instrumentation

The APA450-FG256 consolidates instrument sequencing, timing control, result processing, and front-panel interfaces within one FPGA. Its 186 I/O can connect test channels, status indicators, memory devices, and control processors, while 108 Kb of block RAM supports measurement buffers. The 12,288 logic cells and 450,000-equivalent-gate capacity allow multiple instrument functions to coexist without splitting the design across several small programmable devices. For accurate results, constrain acquisition paths, provide clean clocking, and review I/O timing against the required instrument bandwidth.

🔧

Embedded Peripheral Control

The APA450-FG256 can consolidate repetitive peripheral control, watchdog logic, interrupt handling, timers, and state-machine functions into one flash-programmable device. Its 180 MHz maximum frequency supports high-speed control tasks, while nonvolatile configuration eliminates a configuration-memory refresh sequence and retains the programmed design during power loss. The 186 I/O provide substantial connectivity for sensors, actuators, memories, and host processors. Because utilization depends on configuration and routing, complete the design early enough to identify timing closure and package-routing limitations.

🔒

Secure Device Authentication and Control

The APA450-FG256 can implement nonvolatile state machines, challenge-response logic, key-access control, and event logging in a single programmable-logic device. Its 108 Kb of block RAM can hold work areas and audit records, while 186 I/O support secure elements, sensors, communication links, and status outputs. Flash-based configuration retains programmed control logic through power cycles, making the device useful in access-control and equipment-authentication systems. Security reviewers should evaluate key handling, boot configuration access, update mechanisms, and external debug-control requirements independently of the FPGA's logic capacity.

کورتەی بەرهەمە پێشنیارکراوەکان

APA450-FG256I Same-family 450K-gate device with industrial temperature ordering option بەکارهێنراوە لە: Industrial Automation Controller, Communication Protocol Bridge, Embedded Peripheral Control APA450-FGG256I Same-family temperature-grade alternative بەکارهێنراوە لە: Industrial Automation Controller, Test and Measurement Instrumentation APA450-FG256A Same-family FG256 option with an automotive-temperature ordering code بەکارهێنراوە لە: Data-Acquisition and Signal Conditioning, Test and Measurement Instrumentation, Secure Device Authentication and Control APA450-FFG256 Same-family 450K-gate ordering option بەکارهێنراوە لە: Data-Acquisition and Signal Conditioning, Secure Device Authentication and Control APA450-FGG256 Same-family ProASICPLUS ordering option بەکارهێنراوە لە: Communication Protocol Bridge, Embedded Peripheral Control
What are the key specifications of APA450-FG256 that engineers should know?
The APA450-FG256 provides 450,000 equivalent gates, 12,288 logic cells, 186 I/O, and a maximum clock frequency of 180 MHz in a 256-FPBGA package. It also includes 108 Kb of block RAM and operates from a 2.3 V to 2.7 V core supply. According to the Microchip ProASICPLUS family datasheet, these resources make the device suitable for consolidated control, interface, buffering, and protocol logic in industrial and embedded systems.
Where to download the APA450-FG256 datasheet PDF?
The APA450-FG256 datasheet can be accessed through the Microchip ProASICPLUS family documentation and the manufacturer's APA450 product page. The family datasheet describes the device architecture, configuration method, electrical characteristics, package options, and programming information. Use the complete PDF together with the package drawing and pin table when assigning the 256-FPBGA balls and defining the PCB footprint.
Where can I find the APA450-FG256 pinout and 256-FPBGA footprint?
The APA450-FG256 pin assignments are listed in the pin-description and package-drawing sections of the Microchip ProASICPLUS family datasheet. The device uses a 256-FPBGA package with a 17 mm by 17 mm body and 1 mm ball pitch. Assign the power, ground, configuration, clock, and user I/O balls directly from the manufacturer's package tables rather than inferring positions from another APA450 package code.
How many gates, logic cells, and I/O does APA450-FG256 have?
The APA450-FG256 contains 450,000 equivalent gates, 12,288 logic cells, and 186 user I/O positions. The manufacturer identifies the device as a ProASICPLUS FPGA with 108 Kb of block RAM and a 180 MHz maximum clock frequency. These figures define its capacity for parallel logic, state storage, data buffering, and external interface assignments.
What supply voltage does the APA450-FG256 require?
The APA450-FG256 operates from a 2.3 V to 2.7 V core supply, placing it near a conventional 2.5 V rail. According to the Microchip ProASICPLUS family datasheet, the supported voltage range must be maintained during configuration and normal operation. External interfaces should also be checked for their respective voltage domains before signals are connected directly to the FPGA.
What is the best drop-in replacement for APA450-FG256?
The closest drop-in choices are APA450-FG256 family orderings that retain the 256-FPBGA footprint and 450,000-equivalent-gate architecture, such as APA450-FG256I and APA450-FG256A. The correct choice depends on the required temperature grade, package suffix, and device qualification. Confirm the exact ordering code, ball map, voltage limits, and timing characteristics before approving any replacement.
What can replace APA450-FG256 without changing the PCB?
A PCB-compatible replacement must use the same 256-FPBGA footprint and retain the required power, ground, configuration, clock, and user I/O assignments. APA450-FG256I and APA450-FG256A are same-family ordering options identified in the family cross-reference results. Pin-to-pin substitution should not be based on the 256-ball count alone; verify the manufacturer pin table, temperature grade, and timing specifications.
Is APA450-FG256 the same as APA450-FGG256?
The APA450-FG256 and APA450-FGG256 are closely related ProASICPLUS devices with a listed 450,000-equivalent-gate architecture, but their suffix codes can denote different device options. The comparison information indicates similar functions while warning that primary parameters and circuit structure may differ. Treat APA450-FGG256 as a candidate replacement only after checking its exact package, temperature grade, pin map, and timing specifications.
APA450-FG256 vs APA450-FG256I: which is better for an industrial design?
APA450-FG256I is the more appropriate candidate when the original design requires the industrial temperature option associated with the I suffix. Both parts belong to the 450,000-gate ProASICPLUS family and use a 256-ball package, but ordering-code suffixes can change qualification and operating limits. Verify the required junction-temperature range and confirm that the complete device and package identifiers match the approved schematic.
When should I choose APA450-FG256 over a smaller ProASICPLUS device?
Choose APA450-FG256 when the design needs more than approximately 12,288 logic cells, 186 external I/O, 108 Kb of block RAM, or several parallel functions that would otherwise require multiple programmable-logic devices. Its 450,000-equivalent-gate capacity supports broader control and interface consolidation, while the larger 256-FPBGA package adds routing and assembly complexity. Smaller devices remain preferable when logic, I/O, and memory requirements remain comfortably below these limits.
Is APA450-FG256 suitable for industrial automation and embedded control?
The APA450-FG256 is suitable for industrial automation and embedded-control designs that benefit from nonvolatile flash configuration, 450,000 equivalent gates, and 186 I/O. Its 180 MHz maximum clock and 108 Kb of block RAM support state machines, data acquisition, protocol handling, and peripheral control. The final selection must still satisfy the system's temperature, timing, isolation, and functional-safety requirements.
What is the best Microsemi equivalent for APA450-FG256?
The best Microsemi-family equivalent is the APA450-FG256 ordering itself or a documented APA450 suffix that preserves the 256-FPBGA footprint and required electrical ratings. APA450-FG256I and APA450-FG256A are the leading same-family candidates, with APA450-FGG256 and APA450-FGG256I also appearing in comparison results. No cross-manufacturer drop-in equivalent is established by the available manufacturer and family cross-reference information.
How much block RAM does APA450-FG256 contain?
The APA450-FG256 contains 108 Kb of block RAM for data tables, packet buffers, temporary records, and state-holding functions. This resource supplements its 12,288 logic cells and 450,000 equivalent gates. According to the Microchip ProASICPLUS family documentation, memory organization and access modes should be selected in the development tool according to the target clock and design requirements.
What is the power and thermal challenge in APA450-FG256 designs?
The principal thermal challenge is distributing power and heat through a dense 256-FPBGA footprint operating across a 2.3 V to 2.7 V core range. Place decoupling capacitance directly at the relevant supply balls and provide uninterrupted power and ground planes to limit voltage drop. Because exact current depends on configuration and activity, use worst-case switching conditions from the family datasheet rather than estimating consumption from gate count alone.
Where can I buy APA450-FG256 and check current lead time?
Use the Request a Quote form on this page to request APA450-FG256 availability, current lead time, and order confirmation. The form keeps the request connected to the exact APA450-FG256 ordering code and helps avoid ambiguity with related I, A, or G suffix variants. Confirm the package, temperature grade, quantity, and authorized manufacturing traceability before releasing a purchase order.

داتای سەرچاوەی ئەندازیاری بۆ APA450-FG256 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose APA450-FG256 when the design requires a 450,000-equivalent-gate ProASICPLUS device with 12,288 logic cells, 186 I/O, 108 Kb of block RAM, and operation up to 180 MHz in a 256-FPBGA package. Select APA450-FG256I when the industrial temperature-grade ordering is required, and select APA450-FG256A when the automotive-temperature option is required. APA450-FGG256 and APA450-FGG256I should be considered only after their suffix-specific electrical ratings, qualification, and exact pin assignments have been checked. APA450-FFG256 is useful when its corresponding ordering requirements fit the design. No cross-manufacturer drop-in alternative is established, so changing FPGA vendors requires a complete design, pin, timing, and firmware migration rather than a simple board substitution.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە APA450-FG256I APA450-FG256A APA450-FGG256 APA450-FGG256I APA450-FFG256
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Configuration Technology Nonvolatile flash Nonvolatile flash Nonvolatile flash Nonvolatile flash Nonvolatile flash Nonvolatile flash

جیاکەرەوە سەرەکییەکان

  • High logic density for a flash-programmable ProASICPLUS device (بەراورد بەAPA450-FFG256)
  • Documented 180 MHz performance target and 108 Kb block RAM (بەراورد بەAPA450-FG256I)
  • RoHS-compliant APA450-FG256 ordering (بەراورد بەAPA450-FGG256)
  • Broad 186-I/O interface in a 256-FPBGA package (بەراورد بەAPA450-FG256A)

تێبینییەکانی دیزاین

Place the required core and I/O bypass capacitors directly beside their associated 256-FPBGA balls, with short ground returns into the nearest plane. Maintain uninterrupted supply and ground planes across the device rather than routing power through a narrow neck. Decoupling capacitance and placement must be checked against the family datasheet and the development tool's power-report settings before PCB release.

Assign the 186 user I/O only after the layer stack, escape-routing requirements, and external circuit board interfaces are fixed. Because the package uses 256 balls on a 1 mm pitch, use a full ball map from the manufacturer package drawing and preserve access to configuration and clock pins. Verify manufacturing rules for the selected fab because fine-pitch BGA escape routing and pad geometry affect cost and yield.

Use the 180 MHz figure as a device-family performance target, not a guarantee that every 180 MHz interface will close timing. Constrain clock, transceiver, and high-speed I/O paths according to the tool-supported timing classes, provide clean clock distribution, and run post-route timing analysis with realistic board assumptions. Any cross-domain interface should include synchronizers if its clocks are asynchronous.

Do not substitute an APA450 ordering solely because it contains 256 balls. Confirm the full ordering code, package drawing, temperature range, supply ratings, configuration interface, and pin assignment before treating it as a drop-in replacement. The FGG256 variants are especially easy to confuse with FG256 because both remain within the same ProASICPLUS family, but the comparison information indicates that suffix-specific parameters can differ.

زانیاری پابەندبوون

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Yes
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The APA450-FG256 comparison information identifies the device as RoHS compliant and lead-free. Qualification and material-compliance data for the exact suffix must be confirmed before production release.

داتا پشتڕاستکراوەتەوە لە: 2026-11-05 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

APA450-FG256 datasheet APA450-FG256 pinout APA450-FG256 datasheet pdf Microchip APA450-FG256 APA450-FG256 450000 gates APA450-FG256 180MHz APA450-FG256 256-FPBGA APA450-FG256 drop-in replacement APA450-FG256 vs APA450-FG256I APA450-FG256 price APA450-FG256 stock APA450-FG256 industrial control APA450-FG256 application circuit apa450 pqg208i apa450 clarion

پێکهاتە و زاراوە پەیوەندیدارەکان

Microchip Technology APA450-FG256 APA450-FG256I APA450-FG256A APA450-FGG256 APA450-FGG256I APA450-FFG256 ProASICPLUS FPGA field-programmable gate array programmable logic CPLD flash configuration nonvolatile memory equivalent gates logic cells block RAM 180 MHz 186 I/O 256-FPBGA ball-grid array surface-mount semiconductor industrial automation data acquisition RoHS lead-free
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ