APA600-FG256 - 600K Gate Flash FPGA | Microchip Technology
MPN: APA600-FG256 ✓ چالاکAPA600-FG256 گشتی
A flash FPGA is a programmable-logic semiconductor whose configuration memory is embedded in the chip. Flash configuration provides nonvolatile operation, allowing the programmed circuit to remain available after power is removed without an external configuration PROM. Within the programmable-logic hierarchy, the APA600-FG256 belongs to the ProASICPLUS family of flash-based FPGAs, combining configurable logic blocks, embedded SRAM, user I/O, and programmable interconnect resources on one integrated circuit.
The APA600-FG256 provides approximately 600,000 system gates, 186 user I/Os, and 129,024 bits of RAM in a 256-LBGA package. The listed 180 MHz performance figure represents a key timing characteristic for synchronous digital designs, while the 2.5 V operating supply supports integration into embedded control and signal-processing equipment. Its 256-pin package offers substantially more interconnect options than smaller FPGA packages, which is valuable when a design needs substantial external memory, data buses, or peripheral connectivity.
Architecturally, the ProASICPLUS family combines nonvolatile flash configuration with reprogrammable SRAM-based logic fabric. The APA600 family is identified as a 600K-gate device, and the associated family documentation lists 21,504 cells, a 2.5 V supply, and up to 198 kbits of two-port SRAM for the broader device family. Configuration cells retain the implemented circuit when power is removed, while the programmable logic fabric supports iterative design changes without relying on volatile configuration memory.
Typical applications include industrial control, data acquisition, communications interface logic, embedded instrumentation, test equipment, and general-purpose glue-logic consolidation. The 186 user I/Os make the device especially useful for systems that need numerous parallel digital connections, while 129,024 RAM bits provide moderate on-chip storage for buffers, state machines, and signal-processing functions.
PCB implementation requires careful BGA layout practices, including layer-stackup review, via-in-pad or microvia strategy, solder-paste control, and X-ray inspection after assembly. Because the exact pin assignments and operating limits are defined in the manufacturer pinout and device documentation, designers should use those documents directly when assigning power, configuration, clock, and user-I/O nets.
This product page combines the APA600-FG256 electrical identity, package characteristics, configuration alternatives, and application-focused engineering guidance. It also provides a structured comparison of same-footprint family options to support design migration, qualification, and PCB reuse decisions.
جێگرەوەکانی جێگۆڕکێ بۆ APA600-FG256 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ APA600-FG256 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, System Gates.
APA600-FG256M
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
APA600-FG256A
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →APA600-FG256I
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
APA600-FGG256
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
APA600-FGG256I
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
APA600-FG256 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | Flash-based FPGA |
| Product Family | ProASICPLUS |
| System Gates | 600,000 gates |
| Logic Cells | 21,504 cells |
| User I/Os | 186 I/Os |
| Embedded RAM | 129,024 bits |
| Device Performance | 180 MHz |
| Internal System Performance | 350 MHz |
| External System Performance | 150 MHz |
| ڤۆڵتاژی دابینکردنی کارکردن | 2.5 V |
| Process Technology | 0.22 um CMOS |
| پاکێج | 256-LBGA |
| Total Pins | 256 pins |
| Ball Pitch | 1 mm pitch |
| جۆری دامەزراندن | Surface mount |
| Configuration Memory | Flash, nonvolatile |
ڕێنمایی ڕێکخستنی پینی APA600-FG256 256-lbga
ڕێکخستنی پین بۆ APA600-FG256 (پاکێجی 256-lbga). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ APA600-FG256.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
APA600-FG256 گونجاوە بۆ 6 بەکارھێنانs: Industrial Control and Automation, Data Acquisition Systems, Communications Interface Logic, Programmable Test and Measurement, Embedded Instrumentation, Multi-Function Logic Consolidation.
Industrial Control and Automation
The APA600-FG256 fits industrial controllers that require extensive digital I/O, deterministic programmable logic, and nonvolatile configuration. Its 186 user I/Os provide connections for sensors, actuators, encoders, interlocks, and industrial communication interfaces without requiring numerous separate glue-logic devices. The 600,000-system-gate ProASICPLUS architecture can consolidate control logic, while flash configuration retains the implemented function after power loss. A 2.5 V supply and 256-LBGA package suit densely populated control boards, provided the PCB supports fine-pitch BGA assembly.
پێشنیارکراو
Data Acquisition Systems
The APA600-FG256 is appropriate for data-acquisition front ends requiring parallel sensor inputs, timing control, and local buffering. Its 186 user I/Os can support multiplexed analog-control signals, digital sensor buses, trigger inputs, and status outputs, while 129,024 RAM bits provide storage for sampled frames, status words, and timing history. The listed 180 MHz device performance supports synchronous control at useful clock rates. Engineers should partition I/O by timing domain and use the manufacturer pinout to place clocks and data lanes away from high-switching nets.
پێشنیارکراو
Communications Interface Logic
APA600-FG256 can implement protocol bridges, framing logic, packet buffers, and interface adapters in communication equipment. The 600K-system-gate density allows multiple finite-state machines and datapaths to share one programmable-logic device, while 186 I/Os provide parallel connectivity to transceivers, memory devices, and backplane signals. Its nonvolatile flash configuration simplifies field updates and preserves programmed logic through power cycles. Clock-domain crossings, I/O standards, and timing constraints should be reviewed in the manufacturer datasheet before schematic capture.
پێشنیارکراو
Programmable Test and Measurement
The APA600-FG256 supports programmable test instruments that combine pattern generation, timing control, and result capture in one FPGA. Its 186 user I/Os can connect to test fixtures, stimulus channels, capture registers, and instrument control buses, while 129,024 RAM bits serve as pattern buffers or timing-history storage. Nonvolatile flash configuration allows the instrument to retain different test personalities in the same hardware platform. Designers should use deterministic clocking and separate analog, communication, and power-management sections to simplify verification and EMC control.
پێشنیارکراو
Embedded Instrumentation
The APA600-FG256 is suitable for embedded measurement, signal-conditioning, and calibration logic in portable or rack-mounted instruments. Its programmable interconnect and flash configuration allow calibration tables, acquisition sequences, and control algorithms to be updated without replacing the circuit board. The 129,024 RAM bits can buffer local computations, and the 186 I/Os provide flexible connections to sensors, displays, memory, and calibration interfaces. The 256-LBGA footprint demands careful thermal and assembly planning, particularly when the device operates continuously inside a compact enclosure.
پێشنیارکراو
Multi-Function Logic Consolidation
APA600-FG256 can replace several programmable-logic devices by consolidating address decoding, arbitration, data formatting, and interface control in one 600K-gate FPGA. The large 186-I/O count makes it valuable for systems with wide buses or numerous peripheral connections, and 129,024 RAM bits provide enough storage for queues and registers. Flash configuration retains the design between power cycles and supports in-system updates when the programming architecture permits them. Consolidation should be evaluated for timing closure and recovery behavior, not just gate utilization.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ APA600-FG256 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | APA600-FG256M | APA600-FG256A | APA600-FG256I | APA600-FGG256 | APA600-FGG256I |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 256-LBGA | 256-LBGA - same | 256-LBGA - same | 256-LBGA - same | 256-LBGA - same | 256-LBGA - same |
| Configuration Memory | Flash, nonvolatile | Flash, nonvolatile | Flash, nonvolatile | Flash, nonvolatile | Flash, nonvolatile | Flash, nonvolatile |
جیاکەرەوە سەرەکییەکان
- Exact base-designation family option (بەراورد بەAPA600-FG256M)
- Documented industrial-temperature coverage (بەراورد بەAPA600-FG256)
- Equivalent logic and memory density (بەراورد بەAPA600-FG256A)
- Large I/O availability for logic consolidation (بەراورد بەAPA600-FGG256)
تێبینییەکانی دیزاین
Design the 256-LBGA footprint from the manufacturer package drawing and confirm ball-pad dimensions, solder-mask opening, paste aperture, and land pattern against the selected assembly process. The device is identified as a 1 mm-pitch FBGA, so escape routing from the inner ball array will generally require microvias or a high-layer-count stackup. Keep power and ground distribution independent from signal escape channels, and confirm courtyard and component-clearance requirements before placing adjacent devices.
Plan a low-noise 2.5 V rail with local bulk and high-frequency decoupling close to the supply and ground balls. Place the decoupling network according to the manufacturer reference layout, using the shortest possible connection to package vias and solid ground-plane connections rather than long traces. Validate power sequencing, startup current, and configuration behavior in the datasheet. Do not assume that a nominal 2.5 V rail automatically satisfies all suffix-specific voltage and timing requirements.
Separate clocks, configuration signals, high-fanout I/O, and ordinary data paths into predictable routing regions. The 186 available I/Os can create a dense escape pattern around the BGA, so assign pins early and preserve continuous return paths beneath high-speed nets. Match clock distribution symmetrically and keep the programmable logic fabric's switching activity away from sensitive analog sections where possible. Review every external interface against the manufacturer's I/O standards and timing constraints.
Do not treat APA600-FG256, APA600-FG256A, APA600-FG256M, APA600-FG256I, APA600-FGG256, and APA600-FGG256I as automatically interchangeable based on the shared 256-pin package. Verify the ordering suffix, temperature grade, speed grade, electrical limits, package revision, and programmed-device compatibility in the manufacturer documentation. After substitution, rerun pin-assignment, timing, power, and configuration checks even when the mechanical footprint appears unchanged.
زانیاری پابەندبوون
Compliance attributes were not explicitly identified for the exact APA600-FG256 ordering code. The component is an FPGA rather than an automotive-qualified device, so AEC-Q100 is not applicable.