Microchip Technology

AT90USB1286-AU 16MHz 128KB USB AVR MCU | Microchip Technology

MPN: AT90USB1286-AU ✓ چالاک
3.3 V or 5 V Vdss 64-pin TQFP, 14 mm x 14 mm Package 16 MHz Speed 128 KB Memory
MOQ: 1 |

AT90USB1286-AU گشتی

The Microchip Technology AT90USB1286-AU is an 8-bit AVR RISC microcontroller with a 16 MHz clock, 128 KB of ISP flash memory, and an integrated USB 2.0 device controller in a 64-pin TQFP package. It provides 48 general-purpose I/O lines, 8 KB of SRAM, and 4 KB of EEPROM for firmware, working data, and configuration storage.

An AVR microcontroller is an 8-bit reduced-instruction-set computing platform designed for embedded control. The AT90USB1286 combines the AVR core with USB connectivity, serial interfaces, timers, and general-purpose I/O, placing it within the hierarchy of 8-bit MCU, embedded microcontroller, and embedded processing semiconductor. Its integrated USB controller allows a compact peripheral design without requiring a separate USB interface IC.

Key features include read-while-write flash, USB low-speed and full-speed operation, a USART, a byte-oriented two-wire serial interface, four flexible timer/counter blocks with compare and PWM modes, 32 general-purpose working registers, and a real-time counter. The USB controller supports full-speed operation up to 12 Mbit/s and low-speed operation up to 1.5 Mbit/s, making the device suitable for USB-connected human-interface, control, and data-acquisition equipment.

The enhanced AVR architecture executes instructions in a single clock cycle, supporting efficient time-driven control and event processing. Read-while-write flash allows the firmware to update data while the program continues operating from flash. Digital communication resources support USB connectivity alongside conventional serial expansion, while the timer blocks provide timing, capture, compare, and PWM functions for motor, lighting, and signal-generation circuits.

Typical applications include USB keyboards and mice, industrial human-interface panels, USB data-acquisition equipment, embedded control modules, instrumentation, and custom USB peripheral adapters. The 48 I/O lines offer substantial interface capacity for sensors, displays, relays, and digital controls, while the 128 KB memory footprint accommodates protocol stacks, bootloaders, and application firmware.

PCB design should preserve access to the programming and debug interfaces while keeping sensitive USB and clock routing compact. Confirm the required operating voltage, decoupling requirements, crystal configuration, and USB transceiver connection against the manufacturer datasheet before releasing the layout.

This page combines the core MCU capabilities, package details, application guidance, replacement assessment, and engineering design considerations needed to evaluate the AT90USB1286-AU for a new embedded USB design.

جێگرەوەکانی جێگۆڕکێ بۆ AT90USB1286-AU — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ AT90USB1286-AU (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Flash Memory, Serial Interfaces, Real-Time Counter, SRAM.

Microchip Technology
Package: 64-pin TQFP, 14mm x 14mm
Flash Memory: 128KB
Serial Interfaces: 1 USART and 1 byte-oriented two-wire serial interface
بەراوردکردن لەگەڵ AT90USB1286-AU →
Microchip Technology
Package: 64-TQFP, 14 x 14 mm
Real-Time Counter: 1
بەراوردکردن لەگەڵ AT90USB1286-AU →
Microchip Technology
Package: 64-pin TQFP, 14 x 14 mm
Flash Memory: 64 KB (64K x 8)
Real-Time Counter: 1 real-time counter
بەراوردکردن لەگەڵ AT90USB1286-AU →
Microchip Technology
Package: 64-QFN, 9 x 9 mm
Serial Interfaces: USART and byte-oriented two-wire serial interface
Real-Time Counter: 1 real-time counter
بەراوردکردن لەگەڵ AT90USB1286-AU →
Microchip Technology
Package: 64-TQFP, 14 x 14 mm
Flash Memory: 64 KB
Real-Time Counter: 1
بەراوردکردن لەگەڵ AT90USB1286-AU →
Microchip Technology
Package: 64-TQFP (14x14 mm)
بەراوردکردن لەگەڵ AT90USB1286-AU →

AT90USB1287-AU

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Microchip Technology
📦 64-pin TQFP, 14 mm x 14 mm
8-bit AVR enhanced RISC · 16 MHz · Approaching 16 MIPS at 16 MHz · 128 KB flash (128K x 8) · In-System Programmable flash with read-while-write capability · 4 KB (4K x 8) · 8 KB (8K x 8) · 48

✓ بەردەستە

$13.6172 / یەکە

بینینی داتاشیت →

AT90USB646-AU

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Microchip Technology
📦 64-pin TQFP, 14 mm x 14 mm
8-bit AVR RISC microcontroller · 16 MHz · 64 KB (64K x 8) · 2 KB · 4 KB · 48 lines · 32 registers · USB 2.0 low-speed and full-speed device

پەیوەندی بۆ نرخ

بینینی داتاشیت →

AT90USB647-AU

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Microchip Technology
📦 64-pin TQFP, 14 mm x 14 mm
AVR enhanced RISC · 8-bit microcontroller · 16 MHz · 64 KB · 2 KB · 4 KB · 48 · 32

پەیوەندی بۆ نرخ

بینینی داتاشیت →

AT90USB646-MU

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Microchip Technology
📦 64-pin TQFP, 14 mm x 14 mm
8-bit AVR RISC-based USB microcontroller · 16 MHz · 64 KB flash · 64K x 8 bits · 2 KB · 4 KB · 48 lines · 32 registers

پەیوەندی بۆ نرخ

بینینی داتاشیت →

AT90USB1286-AU زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Microcontroller Type 8-bit AVR RISC-based microcontroller
زۆرترین فرێکوێنسیی کاتژمێر 16 MHz
Flash Memory 128 KB
Flash Organization 128K x 8
Flash Feature ISP flash with read-while-write capability
EEPROM Memory 4 KB
SRAM 8 KB
General-Purpose I/O Lines 48
General-Purpose Working Registers 32
USB Version USB 2.0
USB Controller Low-speed and full-speed USB device controller
USB Full-Speed Data Rate 12 Mbit/s
USB Low-Speed Data Rate 1.5 Mbit/s
Timer/Counter Blocks 4 with compare modes and PWM
Serial Interfaces USART and byte-oriented 2-wire serial interface
ڤۆڵتیەی دابینکردن 3.3 V or 5 V
پاکێج 64-pin TQFP, 14 mm x 14 mm
جۆری دامەزراندن Surface mount
Real-Time Counter Yes
دۆخی RoHS Compliant
REACH Status Compliant

ڕێنمایی ڕێکخستنی پینی AT90USB1286-AU 64-pin tqfp, 14 mm x 14 mm

ڕێکخستنی پین بۆ AT90USB1286-AU (پاکێجی 64-pin tqfp, 14 mm x 14 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 64-pin tqfp, 14 mm x 14 mm بۆ AT90USB1286-AU

هیچ داتای وردی پینئاوت بەردەست نییە بۆ AT90USB1286-AU.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

AT90USB1286-AU گونجاوە بۆ 6 بەکارھێنانs: USB Human-Interface Devices, USB Data-Acquisition Equipment, Industrial Control Modules, Programmable LED and Signage Controllers, USB Serial Adapters, Custom USB Peripherals.

🖥️

USB Human-Interface Devices

The AT90USB1286-AU fits USB keyboards, mice, and control panels because its integrated USB 2.0 device controller supports full-speed transfers up to 12 Mbit/s while the 16 MHz AVR core handles scanning and HID logic. Its 48 general-purpose I/O lines provide ample connections for switch matrices, indicators, and analog control inputs. The 128 KB flash also leaves room for HID descriptors, boot code, and application firmware. Validate USB signal routing, pull-up behavior, power sourcing, and enumeration timing against the manufacturer datasheet before production.

📊

USB Data-Acquisition Equipment

For compact USB data-acquisition and instrumentation products, the AT90USB1286-AU combines 16 MHz AVR processing, 128 KB program flash, 8 KB SRAM, and 4 KB EEPROM in one device. The USB device controller can transfer sampled data to a host while timers support periodic acquisition, and the 48 I/O lines can serve digital inputs, control outputs, and communication peripherals. Use the manufacturer’s electrical and timing specifications to define analog front-end scaling, sampling timing, and USB endpoint behavior.

🏭

Industrial Control Modules

The AT90USB1286-AU is suitable for USB-connected industrial control modules that combine digital monitoring with local actuator control. Four timer/counter blocks support timing, compare, and PWM functions, while the USART and two-wire interface permit expansion to sensors or remote I/O. Its 128 KB flash accommodates control logic, communications, diagnostics, and a bootloader without splitting the firmware across multiple processors. Confirm electrical levels, isolation requirements, ESD strategy, and enclosure temperature conditions during hardware design.

💡

Programmable LED and Signage Controllers

The AT90USB1286-AU can act as the USB configuration controller for programmable LED panels, status indicators, and signage systems. Its timer/counter resources provide PWM channels for brightness and animation effects, and the 48 I/O lines can drive addressable data, latch, enable, or general-purpose control signals. The integrated USB device controller simplifies host-based color, animation, and firmware updates. Design the LED driver stages so the MCU pins do not exceed their specified drive limits, and include headroom in power and thermal calculations.

🔧

USB Serial Adapters

A USB serial adapter can use the AT90USB1286-AU to bridge a legacy peripheral to a modern USB host. The AVR MCU’s USART handles the legacy serial side, while the native USB device controller manages enumeration and data transfer without an external USB controller. This architecture is useful for configuration adapters, service tools, and legacy test equipment. Firmware must implement the desired CDC or vendor-specific protocol, and the design should account for signal-level conversion, ESD protection, cable behavior, and host-driver installation.

🧩

Custom USB Peripherals

The AT90USB1286-AU supports compact custom USB peripherals that require local logic, multiple I/O functions, and firmware updates over USB. Its 128 KB flash stores application code and USB descriptors, while 4 KB of EEPROM preserves configuration values across power cycles. The 16 MHz core and four timers are sufficient for protocol handling, status monitoring, and timing tasks when the workload remains within the AVR architecture’s capability. Define descriptors and endpoints early because they affect host compatibility and firmware organization.

What is the AT90USB1286-AU?
The AT90USB1286-AU is a low-power 8-bit AVR RISC microcontroller operating at up to 16 MHz, with 128 KB of ISP flash, 8 KB of SRAM, 4 KB of EEPROM, and an integrated USB 2.0 device controller. According to the Microchip Technology AT90USB1286 product page, it is packaged in a 64-pin TQFP measuring 14 mm by 14 mm and provides 48 general-purpose I/O lines for embedded USB peripheral designs.
AT90USB1286 datasheet
The official AT90USB1286 documentation is available through the Microchip Technology product page at https://www.microchip.com/en-us/product/AT90USB1286. The device documentation covers the 128 KB flash microcontroller, USB controller, electrical characteristics, package information, and programming interfaces. Use the manufacturer documentation as the controlling reference for pin assignments, operating limits, and USB circuit implementation.
AT90USB1286 TQFP pinout
The AT90USB1286-AU uses a 64-pin TQFP package with a 14 mm by 14 mm body. Consult the pin-description table and package drawing in the manufacturer datasheet before assigning PCB nets because the package exposes USB, power, clock, programming, communications, and multiplexed I/O functions. Do not infer pin numbers from board layouts or development products, as signal names can have several alternate functions.
What USB speeds does the AT90USB1286 support?
The AT90USB1286 supports USB full-speed operation up to 12 Mbit/s and low-speed operation up to 1.5 Mbit/s through its integrated USB 2.0 device controller. The manufacturer documentation also identifies interrupt-on-transfer-completion support, which allows the firmware to service completed USB transfers. Actual application throughput remains dependent on firmware performance, endpoint configuration, and the USB host.
AT90USB1286 Arduino compatibility
The AT90USB1286 is the MCU used in the Teensy 2.0 and Teensy 2.0++ platform, so compatible Arduino cores, bootloaders, and USB libraries exist for those environments. Compatibility depends on the selected core, board definition, bootloader, USB descriptors, and pin mapping; the MCU model alone does not guarantee that an arbitrary Arduino sketch or board layout is interchangeable.
What memory resources are available on the AT90USB1286?
The AT90USB1286 provides 128 KB of ISP flash, 8 KB of SRAM, and 4 KB of EEPROM. According to the Microchip Technology product page, the flash supports read-while-write operation, allowing application code to remain active while data is updated. The 32 general-purpose working registers and the real-time counter complement the memory resources for time-sensitive embedded control.
Is the AT90USB1286-AU suitable for a USB human-interface device?
Yes, the AT90USB1286-AU is well suited to USB human-interface and custom peripheral designs because it combines a USB 2.0 device controller, 16 MHz AVR processing, 48 I/O lines, and 128 KB of flash in one 64-pin TQFP. Its integrated device controller reduces the need for a separate USB interface IC, while the timer blocks support debouncing, periodic scanning, PWM, and other peripheral timing functions.
What is the best drop-in replacement for AT90USB1286-AU?
AT90USB1287-AU is the closest same-package candidate because it retains the 64-pin TQFP format and much of the AVR USB family architecture, but its USB controller role differs from the AT90USB1286 device implementation. Firmware, USB class support, bootloading, and peripheral configuration must be revalidated before treating it as a replacement. No unqualified cross-brand, pin-compatible replacement was identified.
Can AT90USB1287-AU replace AT90USB1286-AU?
AT90USB1287-AU can be considered a footprint-compatible starting point, not an automatic substitution, because both devices use the 64-pin TQFP format and belong to the same AVR USB family. The AT90USB1286 is identified as a USB device controller, while the AT90USB1287 family member provides a different USB host-oriented role. USB electrical connections, descriptors, firmware, and board behavior must be reassessed.
AT90USB1286 vs AT90USB1287
The principal difference between AT90USB1286 and AT90USB1287 is the USB controller role: the AT90USB1286 provides low-speed and full-speed USB device operation, whereas the AT90USB1287 is positioned as a USB host-capable family member. Both can provide substantial AVR processing and flash resources, but host and device designs have different electrical and firmware requirements. Choose according to the required USB role rather than package compatibility alone.
When should I choose AT90USB1286-AU over AT90USB646-AU?
Choose the AT90USB1286-AU when firmware, bootloaders, protocol code, or data logging requires more than the memory capacity of the AT90USB646-AU family. The AT90USB1286 provides 128 KB of flash, while the 64-family configuration is identified with 64 KB of flash, a 50 percent memory reduction. If 64 KB is sufficient, the lower-memory family may be sufficient, but its exact suffix configuration must be checked before substitution.
What are the key specifications of AT90USB1286-AU that engineers should know?
The core AT90USB1286-AU specifications are a 16 MHz maximum clock, 128 KB ISP flash with read-while-write, 8 KB SRAM, 4 KB EEPROM, 48 general-purpose I/O lines, 32 working registers, four timer/counter blocks, USART, two-wire serial interface, and USB 2.0 low-speed or full-speed device operation. The device is supplied in a 64-pin, 14 mm by 14 mm TQFP package.
How do I choose between the 64 KB and 128 KB AVR USB microcontrollers?
Choose the 128 KB AT90USB1286-AU when application firmware, USB stacks, configuration data, or a bootloader require more code space than the 64 KB AT90USB646-AU family provides. Choose the 64 KB option only after checking code size and future firmware growth. Both families are relevant to embedded USB designs, but memory capacity, USB role, exact suffix, package, and peripheral requirements must all match the design.
Where to buy AT90USB1286-AU online?
Use the Request a Quote form on this page to request AT90USB1286-AU pricing, current inventory status, minimum order quantity, and lead time from XAIPART. The form is the appropriate route for a quote against the exact 64-pin TQFP ordering code. Firmware migration is not required when ordering the same MPN, but the authorized shipment should be checked for date codes and marking consistency.
What is the price and lead time for AT90USB1286-AU?
Request the current AT90USB1286-AU price and lead time through the Request a Quote form on this page. Quote responses should specify the exact AT90USB1286-AU ordering code, quantity, delivery destination, and packaging requirement. This avoids relying on a stale price or generic AT90USB1286 family quote that does not identify the correct 64-pin TQFP configuration.
Is AT90USB1286-AU in stock?
Current AT90USB1286-AU inventory status is confirmed through the Request a Quote form on this page. Provide the required quantity and destination so the response can distinguish immediately available material from material requiring manufacturer or distribution allocation. Confirm the exact suffix and package before accepting the shipment because related AVR USB devices may have different memory sizes, USB roles, or package options.
What is the best Microchip equivalent for AT90USB1286-AU?
AT90USB1287-AU is the closest same-package Microchip candidate identified for the AT90USB1286-AU because both use the 64-pin TQFP format. It is not a guaranteed functional replacement: the USB host and device roles differ, and the bootloaders, descriptors, and application code require review. A cross-brand equivalent was not established with the required pin and USB-controller compatibility.

داتای سەرچاوەی ئەندازیاری بۆ AT90USB1286-AU — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the AT90USB1286-AU when a new design requires an 8-bit AVR device with 128 KB of flash, 8 KB of SRAM, 4 KB of EEPROM, 48 I/O lines, and a native USB 2.0 device controller in a 64-pin TQFP. It is a strong fit for HID devices, data-acquisition equipment, serial adapters, custom USB peripherals, and control modules. Consider AT90USB646-AU or AT90USB647-AU only when 64 KB of flash is sufficient and their exact USB, memory, and peripheral configuration has been checked. Consider AT90USB1287-AU for designs that require the different USB host role, but treat it as a design migration rather than an automatic firmware-compatible replacement. No cross-brand part was established as a defensible drop-in replacement.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە AT90USB1287-AU AT90USB646-AU AT90USB647-AU AT90USB646-MU
Package 64-pin TQFP, 14 mm x 14 mm 64-pin TQFP, 14 mm x 14 mm 64-pin TQFP, 14 mm x 14 mm 64-pin TQFP, 14 mm x 14 mm 64-pin package, exact physical variant requires verification
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Architecture 8-bit AVR RISC 8-bit AVR RISC 8-bit AVR RISC 8-bit AVR RISC 8-bit AVR RISC
Flash Memory 128 KB 128 KB 64 KB 64 KB 64 KB
USB Controller Role USB 2.0 low-speed and full-speed device USB host-capable family variant USB device controller USB host-capable family variant USB device controller
USB Full-Speed Data Rate 12 Mbit/s 12 Mbit/s 12 Mbit/s 12 Mbit/s 12 Mbit/s

جیاکەرەوە سەرەکییەکان

  • Larger flash allocation than the 64 KB family alternatives (بەراورد بەAT90USB646-AU)
  • Native USB device role for peripheral designs (بەراورد بەAT90USB1287-AU)
  • Substantial integration reduces external USB-controller overhead (بەراورد بەAT90USB646-AU)

تێبینییەکانی دیزاین

Route the USB data pair as a short, impedance-controlled pair directly between the AT90USB1286 and the board connector. Keep the route away from switching nodes, clocks, and high-slew-current outputs. Follow the manufacturer’s USB layout and capacitance guidance, provide the specified support components, and reserve an accessible programming connector for production firmware loading and board-level service.

Partition the supply network so the MCU core, analog or I/O loads, and USB transceiver-related circuitry use suitable decoupling paths. Place bulk and high-frequency capacitors close to their associated supply pins with a short ground return. Review the device’s operating-voltage and USB voltage requirements in the manufacturer datasheet; do not infer external-transceiver power requirements from the MCU supply label.

Do not substitute a related AT90USB part solely because it has a 64-pin package. The 646 and 647 variants can provide 64 KB rather than 128 KB of flash, and the 1287 family changes the USB controller role. Recheck bootloading, USB descriptors, clock configuration, pin multiplexing, and code-size limits whenever the exact MPN changes.

Reserve all programming, reset, clock, and debug access points even if a production board updates firmware only through USB. A recoverable programming path simplifies manufacturing diagnostics and field maintenance. Preserve component placement flexibility around the clock circuitry and follow the package-specific land pattern and exposed-pad guidance from the manufacturer.

زانیاری پابەندبوون

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Compliant

RoHS, REACH, and conflict-minerals compliance are reported for the AT90USB1286-AU. The exact ordering code is not identified as an AEC-Q100-qualified automotive variant.

داتا پشتڕاستکراوەتەوە لە: 2026-11-04 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

at90usb1286 datasheet at90usb1286 arduino at90usb1286 tqfp at90usb1286 board at90usb1286 teensy 2.0 ++ atmel at90usb1286 teensy at90usb1286 AT90USB1286-AU datasheet PDF AT90USB1286-AU pinout AT90USB1286-AU equivalent AT90USB1286-AU replacement AT90USB1286-AU price AT90USB1286-AU 128KB flash AT90USB1286-AU vs AT90USB1287-AU AT90USB1286-AU USB human interface

پێکهاتە و زاراوە پەیوەندیدارەکان

Microchip Technology AT90USB1286-AU AT90USB1286 AT90USB1287-AU AT90USB646-AU AT90USB647-AU AT90USB646-MU 8-bit AVR RISC microcontroller embedded microcontroller USB 2.0 USB device controller USB host controller Teensy 2.0++ Arduino TQFP-64 surface-mount package ISP flash read-while-write EEPROM SRAM USART two-wire serial interface PWM USB HID RoHS REACH
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ