Microchip Technology

ATSAM4LC8BA-AU - 48MHz Cortex-M4 MCU | Microchip Technology

MPN: ATSAM4LC8BA-AU ✓ چالاک
1.8 V, 2 V, 2.3 V, or 3.3 V Vdss 90 uA/MHz Id 64-pin LQFP, 10 mm x 10 mm body Package 48 MHz Speed 512 KB (512K x 8 bits) Memory
MOQ: 1 |

ATSAM4LC8BA-AU گشتی

The Microchip Technology ATSAM4LC8BA-AU is a 32-bit ARM Cortex-M4 flash microcontroller rated up to 48 MHz, with 512 KB of flash memory and a 64-pin LQFP package. It belongs to the SAM4L family of low-power embedded processors and is designed for connected, sensor-driven, industrial, and low-energy control systems. The device supports operating voltage choices of 1.8 V, 2 V, 2.3 V, and 3.3 V, allowing integration with low-voltage sensors, transceivers, and mixed-signal peripherals.

A flash microcontroller is a semiconductor device that combines a programmable processor core, nonvolatile program memory, data memory, and peripheral interfaces on one integrated circuit. The ATSAM4LC8BA-AU specifically combines an ARM Cortex-M4 RISC processor with the SAM4L low-power architecture. This places it within the hierarchy of microcontroller, embedded processor, 32-bit RISC processor, and programmable semiconductor, while its flash storage supports field-configurable firmware and application updates.

The SAM4L family emphasizes low active-mode consumption and short recovery from sleep. The documented active-mode figure is 90 uA/MHz, while sleep-mode consumption is 1.5 uA and wake-up time can reach 1.5 us. These characteristics make the ATSAM4LC8BA-AU suitable for systems that spend much of their operating cycle in a low-power state. Its 48 MHz Cortex-M4 core provides additional processing capacity for protocol handling, data acquisition, and supervisory control without changing the external processor architecture.

The 512 KB flash configuration offers substantially more program space than small entry-level microcontrollers, supporting modular firmware, communication stacks, and application logic. Operating from a 64-pin LQFP package, the device provides a conventional surface-mount solution that can be inspected, assembled, and serviced with standard electronics manufacturing methods. The exact peripheral configuration, memory organization, and electrical limits should be confirmed against the manufacturer datasheet before a new PCB is released.

Typical applications include battery-powered environmental monitors, industrial sensor nodes, building automation controllers, compact data loggers, wearable accessories, and embedded communication equipment. In these systems, low sleep current and rapid wake-up help limit standby energy, while the Cortex-M4 core and 512 KB flash support protocol handling and structured control firmware. The multiple supported voltage options also help designers interface the MCU with low-energy radio, sensing, and signal-conditioning circuits.

A key design consideration is power-supply partitioning. The selected operating voltage must remain compatible with every external interface, and the PCB should provide low-impedance ground and decoupling paths around the device. Firmware should also use the documented low-power modes deliberately, since an active peripheral or an incorrectly configured clock tree can increase current well above the processor's sleep-mode value.

This page combines the manufacturer's core device characteristics with package guidance, application-oriented engineering context, verified comparison limits, and practical design notes. It supports faster component evaluation while keeping pin-level decisions tied to the official datasheet rather than inferred from family-level descriptions.

جێگرەوەکانی جێگۆڕکێ بۆ ATSAM4LC8BA-AU — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ATSAM4LC8BA-AU (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Flash Memory, Package, Core Processor, Series, Operating Temperature.

Microchip Technology
Flash Memory: 128KB (128K x 8)
Package: 64-TQFP (10x10 mm)
Core Processor: ARM Cortex-M4
بەراوردکردن لەگەڵ ATSAM4LC8BA-AU →
Microchip Technology
Flash Memory: 256KB (256K x 8)
Package: 64-TQFP (10x10 mm)
Core Processor: ARM Cortex-M4
بەراوردکردن لەگەڵ ATSAM4LC8BA-AU →
Microchip Technology
Flash Memory: 256 KB (256K x 8)
Package: 64-TQFP (10x10 mm)
Core Processor: ARM Cortex-M4 (32-bit single-core)
بەراوردکردن لەگەڵ ATSAM4LC8BA-AU →
Microchip Technology
Package: 64-TQFP (10x10 mm)
Core Processor: ARM Cortex-M4
Series: SAM4L
بەراوردکردن لەگەڵ ATSAM4LC8BA-AU →

ATSAM4LS8BA-AU

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 64-pin LQFP
ARM Cortex-M4 · 32-bit · 48 MHz · 512KB (512K x 8) · 64KB · 1.62 V to 3.6 V · 1.8 V / 2.5 V / 3.3 V · 90 uA/MHz

پەیوەندی بۆ نرخ

بینینی داتاشیت →

ATSAM4LC8BA-AU زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type 32-bit ARM Cortex-M4 flash microcontroller
Processor Core ARM Cortex-M4 RISC processor
زۆرترین فرێکوێنسیی کاتژمێر 48 MHz
Flash Memory 512 KB (512K x 8 bits)
Program Memory Type Nonvolatile flash memory
Active-Mode Current 90 uA/MHz
Sleep-Mode Current 1.5 uA
Wake-Up Time Down to 1.5 us
Supply Voltage Options 1.8 V, 2 V, 2.3 V, or 3.3 V
پاکێج 64-pin LQFP, 10 mm x 10 mm body
ژمارەی پین 64 pins
جۆری دامەزراندن Surface mount
Architecture ARM 32-bit RISC
Product Family SAM4L series
Core Bits 32 bits
Operating Voltage Class Low-voltage embedded system

ڕێنمایی ڕێکخستنی پینی ATSAM4LC8BA-AU 64-pin lqfp, 10 mm x 10 mm body

ڕێکخستنی پین بۆ ATSAM4LC8BA-AU (پاکێجی 64-pin lqfp, 10 mm x 10 mm body). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 64-pin lqfp, 10 mm x 10 mm body بۆ ATSAM4LC8BA-AU

هیچ داتای وردی پینئاوت بەردەست نییە بۆ ATSAM4LC8BA-AU.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

ATSAM4LC8BA-AU گونجاوە بۆ 6 بەکارھێنانs: Battery-Powered Environmental Sensors, Industrial Sensor and Condition Monitoring, Connected IoT Edge Nodes, Building Automation Controllers, Compact Data Loggers, Portable and Wearable Electronics.

🧩

Battery-Powered Environmental Sensors

The ATSAM4LC8BA-AU fits environmental sensing nodes that must remain operational for long periods on limited energy. Its SAM4L sleep current of 1.5 uA and wake-up time down to 1.5 us allow the processor to remain mostly asleep while the host periodically reads temperature, humidity, pressure, or air-quality sensors. The 48 MHz Cortex-M4 core can process samples, maintain timekeeping, and manage a communications link between measurement intervals, while 512 KB flash supports structured firmware and local data logging. Designers should disable unused peripherals, retain the sensor interface in its intended low-power state, and include regulator quiescent current when calculating battery life.

🏭

Industrial Sensor and Condition Monitoring

The ATSAM4LC8BA-AU is suitable for industrial monitoring modules that acquire sensor data, apply local filtering, and report system status over a communications interface. Its 512 KB flash provides room for calibration tables, diagnostic routines, and protocol handling, while the Cortex-M4 processor supports responsive control and data preparation. The documented 1.8 V, 2 V, 2.3 V, and 3.3 V operating choices can simplify integration with appropriately selected industrial sensors and transceivers. Before deployment, verify the exact pinout, peripheral assignments, operating-temperature requirements, ESD performance, isolation needs, and production test strategy in the manufacturer documentation.

🌐

Connected IoT Edge Nodes

The ATSAM4LC8BA-AU can serve as the low-power control processor in an IoT edge node that packages sensor conditioning, local decisions, and a short-range communications link. Its 48 MHz Cortex-M4 core handles protocol framing and application logic without requiring a higher-power application processor, while 512 KB flash supports multiple firmware functions. The low 1.5 uA sleep figure and rapid wake-up capability are valuable when the radio and sensors operate on independent duty cycles. The designer should isolate radio current spikes from the MCU supply, keep high-frequency traces away from sensitive analog inputs, and verify which peripherals remain active during each low-power state.

🏭

Building Automation Controllers

The ATSAM4LC8BA-AU is appropriate for building-automation controllers that supervise lighting, occupancy, temperature, and access-related signals while minimizing standby consumption. Its Cortex-M4 architecture supports event handling and local logic, and the 512 KB flash capacity can hold configuration logic and communication routines. The ability to operate from low-voltage rails and wake quickly supports duty-cycled operation in distributed building-control networks. A robust implementation should define fail-safe states for disconnected sensors, use the manufacturer-recommended decoupling and clock layout, and verify that external relays or mains-connected interfaces are isolated from the low-voltage MCU domain.

🖥️

Compact Data Loggers

The ATSAM4LC8BA-AU is useful in compact data loggers that record sensor events, operating conditions, and system counters in nonvolatile flash. Its 512 KB program memory supports buffering, timestamps, diagnostics, and configurable logging routines, while the 48 MHz Cortex-M4 core allows data compression or filtering before storage. The SAM4L power characteristics are advantageous when logging occurs intermittently and the system spends most of its time asleep between samples. Engineers should include flash endurance in the design plan, use safe write procedures, preserve enough space for firmware updates, and validate data retention across the intended temperature and power-failure conditions.

📱

Portable and Wearable Electronics

The ATSAM4LC8BA-AU can support portable accessories and wearable control electronics where battery capacity constrains both active and standby consumption. The 48 MHz Cortex-M4 processor provides enough performance for user-interface control, sensor fusion, and short data-processing tasks, while the SAM4L sleep current of 1.5 uA helps reduce quiescent demand. The low-voltage options allow integration with compact sensors and energy-efficient communication circuits. Actual battery-life results depend on the complete radio, display, sensor, and regulator load. Firmware should therefore coordinate peripheral shutdown, wake the processor only for required tasks, and avoid unnecessary activity on GPIO pins that could leak current through external circuitry.

What is the ATSAM4LC8BA-AU?
The ATSAM4LC8BA-AU is a 32-bit ARM Cortex-M4 flash microcontroller from Microchip Technology's SAM4L family. It operates up to 48 MHz, contains 512 KB of flash memory, and is packaged in a 64-pin LQFP. According to the manufacturer datasheet, the SAM4L architecture emphasizes low power, including 90 uA/MHz active-mode operation, 1.5 uA sleep current, and wake-up times down to 1.5 us.
What are the key specifications of ATSAM4LC8BA-AU that engineers should know?
The principal ATSAM4LC8BA-AU specifications are a 48 MHz ARM Cortex-M4 core, 512 KB of flash, a 64-pin LQFP package, and four documented supply-voltage options: 1.8 V, 2 V, 2.3 V, and 3.3 V. The manufacturer datasheet also identifies 90 uA/MHz active current, 1.5 uA sleep current, and wake-up time down to 1.5 us as key SAM4L-family characteristics for low-energy product design.
What is the operating voltage of ATSAM4LC8BA-AU?
The ATSAM4LC8BA-AU supports 1.8 V, 2 V, 2.3 V, and 3.3 V operating configurations. According to the manufacturer datasheet, the selected supply level should be coordinated with external sensors, communication modules, and interface circuitry. Confirm the complete electrical limits, decoupling requirements, and I/O-domain behavior against the datasheet before the PCB is finalized.
Where can I download the ATSAM4LC8BA-AU datasheet PDF?
The ATSAM4LC8BA-AU datasheet PDF is available through the official component document hosted at pdf.digi-electronics.com, with the direct document link shown on this page. The manufacturer datasheet is the controlling source for the 64-pin pinout, memory map, clock configuration, electrical characteristics, and recommended application circuit. Use that document when assigning every PCB net and power rail.
Where is the ATSAM4LC8BA-AU pinout?
The ATSAM4LC8BA-AU pinout is documented in the manufacturer's 64-pin LQFP pin description table. This page does not reproduce individual pin names because a complete, pin-number-accurate table was not available for validation. Use the pin-description table in the manufacturer datasheet when connecting power, ground, clocks, debug signals, reset, communication interfaces, and general-purpose I/O.
How much power does ATSAM4LC8BA-AU consume in sleep mode?
The SAM4L family used by the ATSAM4LC8BA-AU has a documented sleep-mode consumption of 1.5 uA. According to the manufacturer datasheet, active-mode consumption is 90 uA/MHz, while wake-up time can be as short as 1.5 us. Actual product consumption can be higher when peripherals remain active, so firmware power gating and clock configuration must be evaluated at the complete-system level.
Is ATSAM4LC8BA-AU suitable for battery-powered sensor applications?
Yes, the ATSAM4LC8BA-AU is suitable for battery-powered sensor applications because its SAM4L architecture combines a 48 MHz Cortex-M4 core with 1.5 uA sleep consumption and wake-up times down to 1.5 us. The 512 KB flash also accommodates structured application firmware. For an accurate battery-life estimate, include sensor standby current, regulator quiescent current, and radio duty cycle in the calculation.
What is the difference between ATSAM4LC8BA-AU and ATSAM4LS8BA-AU?
ATSAM4LC8BA-AU and ATSAM4LS8BA-AU are both listed as SAM4L Cortex-M4 devices with 512 KB flash and a 64-pin LQFP package, making ATSAM4LS8BA-AU the closest identified comparison candidate. The distinction is their exact product-line ordering code, which can indicate feature or device-variant differences. Verify the complete pin, peripheral, and memory configuration in the manufacturer datasheet before considering a replacement.
What is the best drop-in replacement for ATSAM4LC8BA-AU?
The closest identified same-footprint candidate is ATSAM4LS8BA-AU, which is listed with a 64-pin LQFP package, ARM Cortex-M4 architecture, 512 KB flash, and the same documented voltage choices. However, exact drop-in status requires pin-by-pin and peripheral-level confirmation. No unrelated cross-brand MCU should be substituted solely because it uses a 64-pin LQFP package, since peripheral mappings and reset behavior can differ.
Can ATSAM4LS8BA-AU replace ATSAM4LC8BA-AU without PCB changes?
ATSAM4LS8BA-AU is a candidate for evaluating as a replacement because it shares the 64-pin LQFP format, Cortex-M4 core class, 512 KB flash capacity, and documented voltage options. It should not be treated as a confirmed drop-in replacement until the manufacturer documentation confirms identical pin functions, peripheral assignments, memory behavior, and programming compatibility. Review the datasheet tables and validate the intended firmware before production use.
When should I choose ATSAM4LC8BA-AU over an alternative MCU?
Choose the ATSAM4LC8BA-AU when a design requires the documented combination of a 48 MHz Cortex-M4 core, 512 KB flash, low-power sleep behavior, and a 64-pin LQFP interface. It is particularly useful when wake-up responsiveness and low standby consumption are important. Select another MCU when its memory, pin map, supply range, peripheral set, qualification, or ecosystem better matches a different product requirement.
Is ATSAM4LC8BA-AU suitable for industrial control applications?
The ATSAM4LC8BA-AU can be used in industrial control applications that fit its 48 MHz Cortex-M4 performance, 512 KB flash capacity, and low-power operating characteristics. Its 64-pin LQFP package also supports conventional surface-mount assembly and inspection. For deployment in a particular industrial environment, verify temperature range, ESD behavior, isolation requirements, qualification, and long-term supply expectations separately.
Where can I buy ATSAM4LC8BA-AU online?
Use the Request a Quote form on this page to request ATSAM4LC8BA-AU pricing, current availability, lead time, and order quantities. The form lets you state required quantities, date-code preferences, target pricing, and inspection requirements in one request. Avoid approving a purchase until the quote confirms the exact ATSAM4LC8BA-AU ordering code, 64-pin LQFP package, and delivery configuration.
What is the price of ATSAM4LC8BA-AU?
Submit the Request a Quote form on this page for current ATSAM4LC8BA-AU pricing and quantity-break information. Pricing can vary with order quantity, date-code requirements, inventory status, and delivery terms. The request should identify the exact 64-pin LQFP ordering code ATSAM4LC8BA-AU so the returned quotation corresponds to the intended package and configuration.
What is the lead time for ATSAM4LC8BA-AU?
Request the current ATSAM4LC8BA-AU lead time through the Request a Quote form on this page. Include your required quantity, production schedule, approved-vendor list, date-code policy, and inspection requirements. A factory schedule and available-channel inventory can produce different lead times, so obtain the delivery commitment against the exact ordering code before releasing the purchase order.
Is ATSAM4LC8BA-AU in stock?
Request an ATSAM4LC8BA-AU stock confirmation and lead-time quote through the Request a Quote form on this page. The request should specify quantity, date-code requirements, shipment destination, and whether partial delivery is acceptable. This avoids relying on a generic inventory count that may not match the requested packing configuration, quality requirements, or manufacturing schedule.
What is the best cross-brand equivalent for ATSAM4LC8BA-AU?
No cross-brand equivalent is recommended without a complete pin, memory, peripheral, and software-compatibility review. ATSAM4LC8BA-AU combines a Cortex-M4 core, 512 KB flash, specific low-power behavior, and a 64-pin LQFP layout. A competitor MCU matching only the package and clock speed may still differ in port mapping, analog interfaces, sleep timing, or startup behavior, making it unsuitable for an unmodified PCB.

داتای سەرچاوەی ئەندازیاری بۆ ATSAM4LC8BA-AU — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose ATSAM4LC8BA-AU when a design needs the documented combination of a 48 MHz ARM Cortex-M4 core, 512 KB flash, low 1.5 uA sleep consumption, and a 64-pin LQFP interface. It is especially attractive for battery-operated sensor nodes, compact data loggers, and industrial monitoring modules that spend substantial time asleep but need rapid response when awakened. ATSAM4LS8BA-AU is the closest identified same-family candidate because its listed core, flash capacity, voltage options, and package align; however, confirm pin functions, peripheral mappings, startup behavior, and firmware compatibility before using it as a substitution. Do not choose a cross-brand MCU merely because it also uses a 64-pin LQFP package. If a design requires more RAM, a different memory architecture, a smaller package, a larger I/O count, or a specific qualification, select a device whose documented specifications satisfy those requirements rather than forcing an unqualified footprint match.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە ATSAM4LS8BA-AU
Brand Microchip Technology Microchip Technology
Package 64-pin LQFP, 10 mm x 10 mm 64-pin LQFP
Processor Core ARM Cortex-M4 RISC ARM Cortex-M4 RISC
Flash Memory 512 KB (512K x 8 bits) 512 KB flash
Supply Voltage Options 1.8 V, 2 V, 2.3 V, or 3.3 V 1.8 V, 2 V, 2.3 V, or 3.3 V
Product Family SAM4L SAM4L

جیاکەرەوە سەرەکییەکان

  • Larger documented flash allocation than lower-memory SAM4 family choices (بەراورد بەATSAM4LS8BA-AU)
  • Defined low-power operating characteristics for duty-cycled designs (بەراورد بەATSAM4LS8BA-AU)
  • Identical core, flash, voltage, and package headline parameters in the closest candidate (بەراورد بەATSAM4LS8BA-AU)

تێبینییەکانی دیزاین

Budget the complete power budget rather than using the 1.5 uA sleep figure alone. The ATSAM4LC8BA-AU can be active at 90 uA/MHz, while external sensors, radios, regulators, pull resistors, and leakage paths may dominate current. Confirm the selected operating voltage, disable unused peripherals in firmware, examine every external GPIO state during sleep, and include regulator quiescent current in the battery-life calculation. Use the manufacturer power-management guidance for exact mode-entry and wake-up conditions.

Place all required decoupling capacitors close to their corresponding supply and ground pins, with short, low-loop-area connections and a solid ground plane. Separate noisy digital, clock, and switching-regulator paths from precision analog inputs. Route communication and debug signals away from sensitive sensor connections where practical. Since the device uses a 64-pin LQFP package, inspect solder joints for bridging and verify the orientation mark against the footprint before power is applied.

Do not select a substitute MCU from package dimensions and core frequency alone. ATSAM4LS8BA-AU is the closest identified candidate, but production substitution still requires comparison of every pin function, peripheral mapping, clock and reset behavior, memory organization, boot configuration, and development-tool support. Also confirm that firmware supports the alternative device's register map. Perform brownout, watchdog, sleep-current, and full I/O-loop testing before authorizing a drop-in replacement.

Use the manufacturer's reference layout and pin-description tables as the authority for the 64-pin LQFP footprint and exposed connections. Keep the MCU away from heat sources and high-current switching paths, provide unobstructed access for inspection, and keep sensitive analog grounds under their associated analog circuitry. If the board uses crystal timing, follow the specified grounding and placement guidance to reduce oscillator noise and startup sensitivity.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

No definitive environmental or automotive qualification status was confirmed for the exact ordering code. Check the manufacturer product page and current material-declaration documentation before production release.

داتا پشتڕاستکراوەتەوە لە: 2026-11-04 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

ATSAM4LC8BA-AU datasheet ATSAM4LC8BA-AU specifications ATSAM4LC8BA-AU pinout ATSAM4LC8BA-AU datasheet pdf ATSAM4LC8BA-AU LQFP pinout ATSAM4LC8BA-AU equivalent ATSAM4LC8BA-AU replacement ATSAM4LC8BA-AU vs ATSAM4LS8BA-AU ATSAM4LC8BA-AU footprint ATSAM4LC8BA-AU application circuit Microchip ATSAM4LC8BA-AU ATSAM4LC8BA-AU price ATSAM4LC8BA-AU stock ATSAM4LC8BA-AU low power mode

پێکهاتە و زاراوە پەیوەندیدارەکان

Microchip Technology ATSAM4LC8BA-AU ATSAM4LS8BA-AU SAM4L ARM Cortex-M4 microcontroller embedded processor 32-bit RISC processor flash memory low-power microcontroller LQFP-64 surface mount 48 MHz 512 KB flash 90 uA/MHz active current 1.5 uA sleep current 1.5 us wake-up time battery-powered sensor industrial monitoring IoT edge node data logger building automation wearable electronics
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ