Microchip Technology

ATSAM4S2BA-UUR - 120MHz Cortex-M4 128KB MCU | Microchip

MPN: ATSAM4S2BA-UUR ✓ چالاک
1.2 V and 3.3 V Vdss 64-pin WLCSP Package 120 MHz Speed 128 KB Memory
MOQ: 1 |

ATSAM4S2BA-UUR گشتی

The Microchip Technology ATSAM4S2BA-UUR is a 32-bit ARM Cortex-M4 RISC microcontroller with 120 MHz maximum operating frequency, 128 KB of Flash memory, and 64 KB of SRAM in a 64-pin WLCSP package. It supports 1.2 V and 3.3 V operation and integrates I2C, SPI, UART, USB, PWM, ADC, and DAC peripherals.

A microcontroller is a programmable semiconductor that combines a processor core, memory, and embedded peripherals on one integrated circuit. The ARM Cortex-M4 belongs to the microcontroller hierarchy and provides deterministic instruction execution for embedded control systems. Within Microchip's SAM4S family, the ATSAM4S2BA-UUR is positioned as a compact, moderately resourced device for connected industrial, communications, and control applications.

The 120 MHz Cortex-M4 core provides substantially greater processing headroom than lower-frequency 8-bit or 16-bit controllers while retaining the simplicity of a single-chip embedded design. Its 128 KB Flash configuration supports embedded firmware, while 64 KB of SRAM accommodates working memory, buffers, stack space, and intermediate processing data. Native QTouch support expands the design options for capacitive buttons, sliders, and wheels.

Communication and conversion peripherals reduce the need for external components in connected control equipment. The device includes I2C and SPI interfaces for sensors and memories, UART for serial links, full-speed USB device connectivity, PWM channels for motor or lighting control, and ADC and DAC functions for measurement and analog signal generation. This integration allows a compact system to process local data and communicate with a host, controller, or service equipment.

Typical uses include industrial sensor nodes, USB-connected data-acquisition equipment, capacitive touch interfaces, compact motor controllers, and embedded communications modules. The 64-pin WLCSP construction favors space-constrained products, but it demands careful PCB design, fine-pitch assembly capability, and deliberate thermal and power planning.

Designers should follow the pin-description table, recommended decoupling configuration, and layout guidance in the manufacturer datasheet. The WLCSP footprint should be reviewed against assembly capability, while USB, analog, and high-speed signal routes require short paths, controlled return-current paths, and appropriate grounding. The MCU should be selected only when its memory and peripheral set match the application without requiring unnecessary firmware complexity.

This page consolidates the exact device identity, package, memory, interface, and application information into an engineering-oriented selection reference. It also distinguishes same-package family options by memory capacity, helping designers assess PCB reuse while recognizing that firmware, pin multiplexing, and peripheral-equivalence checks remain essential before replacement.

جێگرەوەکانی جێگۆڕکێ بۆ ATSAM4S2BA-UUR — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ATSAM4S2BA-UUR (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Packaging, Flash Memory, RoHS Status, Power Consumption.

Microchip Technology
Package: 64-LQFP (10 x 10 mm)
Packaging: Tape & Reel (T/R)
Flash Memory: 1 MB (1M x 8)
بەراوردکردن لەگەڵ ATSAM4S2BA-UUR →
Microchip Technology
Package: 64-WLCSP (UFBGA), 3.32 x 3.32 mm
Packaging: Tape & Reel (T&R)
Flash Memory: 128 KB (128K x 8)
بەراوردکردن لەگەڵ ATSAM4S2BA-UUR →
Microchip Technology
Package: WLCSP-64 (64-UFBGA / WLCSPGREEN)
Packaging: Tape & Reel (T/R)
بەراوردکردن لەگەڵ ATSAM4S2BA-UUR →
Microchip Technology
Package: 64-UFBGA, WLCSP
Power Consumption: 200 uA/MHz
بەراوردکردن لەگەڵ ATSAM4S2BA-UUR →

ATSAM4S4BA-UU

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Microchip Technology
📦 64-pin WLCSP
ARM Cortex-M4 · 32-bit · 120 MHz · 256 KB · 64 KB · Thumb-2 with DSP instructions · MPU (Memory Protection Unit) · 1.62 V to 3.6 V

پەیوەندی بۆ نرخ

بینینی داتاشیت →

ATSAM4S2BB-UUR

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Microchip Technology
📦 64-pin WLCSP
ARM Cortex-M4 · 32-Bit · 120 MHz · 128 KB (128K x 8) · 64 KB · 1.62 V to 3.6 V · 180 uA/MHz class · Yes

پەیوەندی بۆ نرخ

بینینی داتاشیت →

ATSAM4S8BA-UUR

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Microchip Technology
📦 64-pin WLCSP
ARM Cortex-M4, 32-bit · 120 MHz · 512 KB · 128 KB · 1.62 V to 3.6 V · 200 uA/MHz · 64-UFBGA, WLCSP · Green

پەیوەندی بۆ نرخ

بینینی داتاشیت →

ATSAM4S16BB-UUR

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 64-pin WLCSP
Flash memory increases from 128 KB to 1 MB, a 700% increase; the same 120 MHz SAM4S family platform is retained

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

ATSAM4S16BB-AN

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Microchip Technology
📦 64-pin WLCSP
ARM Cortex-M4 · 32-Bit · 120 MHz · 1 MB (1M x 8) · 128 KB · 16 KB (boot loader / IAP routines) · 1.62 V to 3.6 V · 200 uA/MHz

پەیوەندی بۆ نرخ

بینینی داتاشیت →

ATSAM4S2BA-UUR زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type 32-bit ARM Cortex-M4 RISC microcontroller
Maximum CPU Frequency 120 MHz
Core Architecture ARM Cortex-M4
Flash Memory 128 KB
RAM 64 KB
Operating Voltage 1.2 V and 3.3 V
ژمارەی پین 64 pins
پاکێج 64-pin WLCSP
Package Form 64-UFBGA/WLCSP
جۆری دامەزراندن Surface mount
پلەی گەرمیی کارکردن -40°C to +85°C
Packaging Tape and reel
Serial Interfaces I2C, SPI, and UART
USB Interface Full-speed USB device
Analog Functions ADC and DAC
Timing and Control PWM
Touch Support Microchip QTouch capacitive touch
دۆخی RoHS unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

ڕێنمایی ڕێکخستنی پینی ATSAM4S2BA-UUR 64-ufbga/wlcsp

ڕێکخستنی پین بۆ ATSAM4S2BA-UUR (پاکێجی 64-ufbga/wlcsp). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 64-ufbga/wlcsp بۆ ATSAM4S2BA-UUR

هیچ داتای وردی پینئاوت بەردەست نییە بۆ ATSAM4S2BA-UUR.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

ATSAM4S2BA-UUR گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor Node, USB Data-Acquisition Controller, Capacitive Touch Control Panel, USB Communication Module, Compact Motor Controller, Embedded Data Logger.

🏭

Industrial Sensor Node

The ATSAM4S2BA-UUR fits an industrial sensor node that must collect measurements locally and forward them through a serial or USB connection. Its 120 MHz ARM Cortex-M4 core provides responsive task scheduling, while 64 KB of SRAM can hold acquisition buffers and communication state. I2C and SPI suit sensor and transceiver connections, while UART or USB provides a host interface. The 64-pin WLCSP also helps reduce board area, although the 128 KB Flash limit requires disciplined firmware sizing and a verified industrial temperature range of -40°C to +85°C.

📊

USB Data-Acquisition Controller

The ATSAM4S2BA-UUR can serve as the control and communications processor in a compact USB data-acquisition system. Its full-speed USB device interface avoids a separate USB bridge, while the integrated ADC, DAC, PWM, DMA-capable serial peripherals, and 120 MHz Cortex-M4 core support real-time sampling, buffering, and control tasks. Sixty-four kilobytes of SRAM is suitable for moderate multi-channel acquisition but should be checked against buffer depth and protocol overhead. USB routing must follow the manufacturer's high-speed layout guidance, including controlled impedance and an uninterrupted ground reference.

🧩

Capacitive Touch Control Panel

The ATSAM4S2BA-UUR supports a compact capacitive touch interface through its native QTouch capability. The 120 MHz core can manage touch scanning, debouncing, LED effects, and application logic, while the 128 KB Flash accommodates control firmware and interface graphics logic. The integrated 64-pin WLCSP package leaves more board area for sensors or a display in space-sensitive products. Designers should verify channel count, scan timing, grounding, and electrode geometry against the manufacturer QTouch guidance and use the exact package pin assignments in the firmware configuration.

🌐

USB Communication Module

The ATSAM4S2BA-UUR is appropriate for a compact USB communication module that translates device data into a standard host interface. The integrated USB device controller, UART, SPI, and I2C peripherals support a broad range of protocol bridges and sensor gateways without duplicating USB hardware. Its 128 KB Flash and 64 KB SRAM are appropriate for protocol conversion, buffering, and firmware updates when application code remains moderate. A 64-pin WLCSP assembly reduces product size, but connector clearance, USB impedance routing, ESD protection, and firmware update security must be addressed at board level.

⚡

Compact Motor Controller

The ATSAM4S2BA-UUR can coordinate a small motor-control subsystem where a compact package, deterministic control, and multiple serial peripherals are valuable. Its PWM resources support actuator command generation, while ADC and DAC functions assist with current sensing, monitoring, and reference generation. The 120 MHz Cortex-M4 core can execute control loops alongside communications and diagnostics, and the 64-pin WLCSP preserves board space in integrated equipment. The final design must confirm timer channel allocation, motor-driver timing, thermal conditions, and whether the 128 KB Flash limit accommodates the chosen control algorithm.

🖥️

Embedded Data Logger

The ATSAM4S2BA-UUR can manage a compact industrial data logger with local sampling, event storage, and host transfer. The 120 MHz processor supports concurrent acquisition and communication tasks, while I2C and SPI connect to external sensors and nonvolatile storage. The 64 KB RAM buffer can smooth short acquisition bursts, although sustained logging rates must be reconciled against Flash endurance and the 128 KB internal Flash capacity. For reliable operation, designers should include storage wear management, brownout-safe write sequencing, real-time timestamps, and a recovery path for interrupted log updates.

What is the ATSAM4S2BA-UUR?
The ATSAM4S2BA-UUR is a Microchip Technology 32-bit ARM Cortex-M4 microcontroller operating up to 120 MHz, with 128 KB of Flash memory and 64 KB of SRAM. It is packaged in a 64-pin WLCSP for space-constrained embedded products. According to the manufacturer datasheet, the device combines I2C, SPI, UART, USB, PWM, ADC, DAC, and QTouch capabilities on one integrated circuit.
What is the operating voltage of ATSAM4S2BA-UUR?
The ATSAM4S2BA-UUR supports 1.2 V and 3.3 V operation. These voltage options correspond to the low-voltage core and I/O operating domains used by the SAM4S family. According to the Microchip SAM4S datasheet, designers should also account for the internal regulator, selected operating mode, and external component recommendations when establishing the system power architecture.
How much memory does ATSAM4S2BA-UUR have?
The ATSAM4S2BA-UUR contains 128 KB of Flash memory and 64 KB of SRAM. Flash provides nonvolatile storage for firmware and constants, while the SRAM is used for stack space, data, communication buffers, and real-time processing. According to the manufacturer datasheet, the 128 KB Flash is organized as 128K x 8 bits.
Where can I download the ATSAM4S2BA-UUR datasheet PDF?
The official ATSAM4S2BA-UUR datasheet PDF is available through Microchip's SAM4S family document. It contains the pin description, electrical characteristics, memory map, peripheral details, package information, and recommended application circuits. For production design work, use the manufacturer document rather than relying on distributor summaries, because package pin multiplexing and operating limits must be checked against the exact revision.
Where is the ATSAM4S2BA-UUR pinout?
The ATSAM4S2BA-UUR pinout is published in the pin-description table of the Microchip SAM4S family datasheet. The component uses a 64-pin WLCSP footprint, and the table identifies power pins, ground pins, I/O multiplexing, and peripheral functions for every ball. Because the package is a fine-pitch WLCSP, engineers should use the manufacturer land pattern and pin table directly when defining the PCB footprint.
What peripherals are integrated into ATSAM4S2BA-UUR?
The ATSAM4S2BA-UUR integrates I2C, SPI, UART, USB device, PWM, ADC, DAC, and QTouch capacitive-touch functions. According to the manufacturer datasheet, these peripherals support local sensor communication, serial data transfer, analog measurement, waveform generation, motor control, and touch-user interfaces. The available function assigned to each pin can vary through the microcontroller's pin multiplexing configuration.
ATSAM4S2BA-UUR vs ATSAM4S2BA-AUR — which one fits the PCB?
The ATSAM4S2BA-UUR uses a 64-pin WLCSP, while the ATSAM4S2BA-AUR is listed in a 64-pin LQFP package. Although both belong to the ATSAM4S2BA family and use the same 120 MHz Cortex-M4, 128 KB Flash, and 64 KB SRAM configuration, their physical footprints are not interchangeable. Choose the UUR only when the PCB supports its 64-UFBGA/WLCSP land pattern.
Can ATSAM4S4BA-UU replace ATSAM4S2BA-UUR?
The ATSAM4S4BA-UU is a same-package family candidate for review, but it should not be treated as an unconditional firmware-compatible replacement. It offers more Flash memory than the ATSAM4S2BA-UUR, while the processor and peripheral organization may still require firmware, startup, linker, and pin-assignment checks. According to the SAM4S family documentation, compatible package families exist, but software configuration must be verified before production substitution.
When should I choose ATSAM4S2BA-UUR over a larger SAM4S device?
Choose the ATSAM4S2BA-UUR when its 128 KB Flash, 64 KB SRAM, 120 MHz Cortex-M4 core, and integrated communication and analog peripherals satisfy the design without requiring additional memory. A larger SAM4S device is preferable when firmware growth, intensive data processing, expanded connectivity, or more peripheral resources are expected. The smaller choice can reduce board area, power demand, and firmware-management complexity.
Is ATSAM4S2BA-UUR suitable for a USB data-acquisition device?
The ATSAM4S2BA-UUR is suitable for a compact USB data-acquisition device because it combines a 120 MHz Cortex-M4 core, 64 KB SRAM, full-speed USB device connectivity, and ADC/DAC functions. According to the manufacturer datasheet, USB and the serial interfaces are integrated on-chip. The design must still verify ADC performance, DMA requirements, signal conditioning, USB routing, and whether 64 KB of SRAM is sufficient for the selected acquisition architecture.
What can replace ATSAM4S2BA-UUR?
The ATSAM4S2BA-UUR can be evaluated against same-package SAM4S-family devices such as the ATSAM4S4BA-UU, ATSAM4S2BB-UUR, ATSAM4S8BA-UUR, and ATSAM4S16BB-UUR. Each candidate changes the available Flash capacity, so replacement requires checking firmware size, startup code, linker limits, peripheral configuration, and pin multiplexing. The ATSAM4S2BA-AUR is not a physical drop-in option because it uses LQFP rather than WLCSP.
Is ATSAM4S2BA-UUR the same as ATSAM4S2BA-AUR?
No. The ATSAM4S2BA-UUR and ATSAM4S2BA-AUR share the ATSAM4S2BA device identity and principal 120 MHz Cortex-M4, 128 KB Flash, and 64 KB SRAM resources, but their packages differ. The UUR is a 64-pin WLCSP and the AUR is a 64-pin LQFP. They therefore require different PCB footprints, assembly processes, and land patterns despite their close functional relationship.
Where can I buy ATSAM4S2BA-UUR and check its price?
Use the Request a Quote form on this page to request ATSAM4S2BA-UUR pricing, current availability, and lead time. The form allows buyers to specify the required quantity, package format, and delivery expectations without relying on stale price tables. For production planning, also request the current manufacturer lifecycle and traceability information appropriate for the intended industry.
What is the lead time for ATSAM4S2BA-UUR?
The current ATSAM4S2BA-UUR lead time must be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, reel packaging, component condition, and manufacturing demand, so a general inventory statement would not represent a firm allocation. Buyers should provide their required quantity and target production date when requesting the quotation.
Is ATSAM4S2BA-UUR in stock?
Current ATSAM4S2BA-UUR stock status should be confirmed through the Request a Quote form on this page. The component is supplied in tape-and-reel packaging for production use, and available quantity may vary by reel and order size. Request the desired quantity, manufacturing dates, and lot-traceability requirements with the quotation for an actionable supply response.
What are the key specifications of ATSAM4S2BA-UUR that engineers should know?
The key ATSAM4S2BA-UUR specifications are a 120 MHz ARM Cortex-M4 core, 128 KB Flash, 64 KB SRAM, 1.2 V and 3.3 V operation, and a 64-pin WLCSP package. Integrated resources include USB device, I2C, SPI, UART, PWM, ADC, DAC, and QTouch support. According to the Microchip SAM4S datasheet, these characteristics make the device suitable for compact embedded control, communications, analog measurement, and touch-interface designs.

داتای سەرچاوەی ئەندازیاری بۆ ATSAM4S2BA-UUR — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the ATSAM4S2BA-UUR for compact embedded products that require a 120 MHz Cortex-M4, 128 KB Flash, 64 KB SRAM, USB, several serial interfaces, analog conversion, and QTouch in a 64-pin WLCSP. It is attractive when board area is constrained and firmware can remain within the 128 KB Flash limit. Choose ATSAM4S4BA-UU or ATSAM4S2BB-UUR when the same package and core are needed but more Flash would reduce code-size pressure. ATSAM4S8BA-UUR and ATSAM4S16BB-UUR suit applications whose firmware growth justifies 512 KB or 1 MB of storage. Do not select ATSAM4S2BA-AUR for an existing WLCSP board because its LQFP package requires a different footprint. Before adopting any larger-memory alternative, verify firmware compatibility, interrupt configuration, peripheral availability, pin multiplexing, and power behavior.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە ATSAM4S4BA-UU ATSAM4S2BB-UUR ATSAM4S8BA-UUR ATSAM4S16BB-UUR
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 64-pin WLCSP 64-pin WLCSP - same 64-pin WLCSP - same 64-pin WLCSP - same 64-pin WLCSP - same
Processor Core ARM Cortex-M4 ARM Cortex-M4 ARM Cortex-M4 ARM Cortex-M4 ARM Cortex-M4
Maximum CPU Frequency 120 MHz 120 MHz 120 MHz 120 MHz 120 MHz
Flash Memory 128 KB 256 KB 256 KB 512 KB 1 MB
RAM 64 KB 64 KB 64 KB 64 KB 64 KB
Operating Voltage 1.2 V and 3.3 V 1.2 V and 3.3 V 1.2 V and 3.3 V 1.2 V and 3.3 V 1.2 V and 3.3 V
Integrated Communications I2C, SPI, UART, and USB device I2C, SPI, UART, and USB device I2C, SPI, UART, and USB device I2C, SPI, UART, and USB device I2C, SPI, UART, and USB device
Analog and Timing Functions ADC, DAC, and PWM ADC, DAC, and PWM ADC, DAC, and PWM ADC, DAC, and PWM ADC, DAC, and PWM
Touch Capability Native Microchip QTouch support Native Microchip QTouch support Native Microchip QTouch support Native Microchip QTouch support Native Microchip QTouch support

جیاکەرەوە سەرەکییەکان

  • Lower internal Flash demand for compact control designs (بەراورد بەATSAM4S4BA-UU)
  • Same-package migration path with additional Flash (بەراورد بەATSAM4S2BB-UUR)
  • Integration reduces external communication components (بەراورد بەATSAM4S16BB-UUR)

تێبینییەکانی دیزاین

Use the exact 64-UFBGA/WLCSP land pattern and ball map from the manufacturer package drawing. Place all required decoupling capacitors next to their associated power balls and keep the footprint free of copper or mask features that could interfere with assembly. Because the device has no exposed thermal pad in the identified package, thermal performance depends primarily on the PCB copper available around the package and the distribution of heat-producing peripherals.

Route USB, I2C, and SPI signals with short, continuous paths and reference to a continuous ground plane. The USB interface requires particularly careful impedance control, short return paths, and placement of its protection and filtering components near the connector or pins. Avoid routing fast signals beneath antenna areas, noisy switching regulators, or analog converter sections where they could increase radiated noise or reduce measurement performance.

Build the power tree around the manufacturer's recommended operating modes and voltage domains. Keep the 1.2 V core rail quiet and separate its filtering from switching-node and digital I/O return currents where practical. Verify startup sequencing, brownout behavior, peripheral current, and regulator headroom at the minimum input voltage. For battery-powered products, average current should include processor activity, USB attach states, and sensor-control duty cycles rather than sleep current alone.

Do not treat a same-package family alternative as an automatic firmware-compatible replacement. Confirm startup code, linker memory regions, flash wait states, interrupt-vector requirements, peripheral instances, pin multiplexing, package ball assignments, and USB descriptors. The ATSAM4S2BA-AUR is functionally related but uses LQFP, so it cannot replace the ATSAM4S2BA-UUR without a PCB redesign.

Estimate worst-case junction temperature from maximum ambient temperature, processor and peripheral load, supply voltage, and the package-specific thermal model in the manufacturer documentation. Keep the board's power circuitry outside tight thermal bottlenecks and provide adequate copper area where permitted by the layout. Validate final designs across the full -40°C to +85°C operating range because ambient temperature and enclosure conditions can materially change regulator dissipation and component operating margin.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The industrial-temperature ATSAM4S2BA-UUR is identified as a green product, but specific RoHS, REACH, halogen-free, lead-free, and conflict-minerals declarations require confirmation from the current manufacturer product documentation or declaration of compliance.

داتا پشتڕاستکراوەتەوە لە: 2026-11-04 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

atsam4s2ba aur ATSAM4S2BA-UUR datasheet ATSAM4S2BA-UUR datasheet pdf ATSAM4S2BA-UUR pinout ATSAM4S2BA-UUR 120MHz Cortex-M4 ATSAM4S2BA-UUR 64-WLCSP ATSAM4S2BA-UUR equivalent ATSAM4S2BA-UUR replacement ATSAM4S2BA-UUR cross reference ATSAM4S2BA-UUR vs ATSAM4S2BA-AUR ATSAM4S2BA-UUR footprint ATSAM4S2BA-UUR application circuit Microchip ATSAM4S2BA-UUR ATSAM4S2BA-UUR price ATSAM4S2BA-UUR stock

پێکهاتە و زاراوە پەیوەندیدارەکان

Microchip Technology ATSAM4S2BA-UUR ATSAM4S2BA-AUR ATSAM4S4BA-UU ATSAM4S2BB-UUR ATSAM4S8BA-UUR ATSAM4S16BB-UUR ATSAM4S16BB-AN ARM Cortex-M4 RISC processor 32-bit microcontroller embedded microcontroller semiconductor SAM4S series Microchip QTouch capacitive touch technology USB device controller full-speed USB I2C SPI UART ADC DAC PWM 64-pin WLCSP 64-UFBGA QFN family surface mount SMD package Flash memory SRAM industrial electronics
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ