Microchip Technology

ATSAMD20G16B-AU - 48MHz Cortex-M0+ MCU | Microchip

MPN: ATSAMD20G16B-AU ✓ چالاک
1.6 V to 3.6 V Vdss 48-TQFP, 7 x 7 mm Package 48 MHz Speed 64 KB Memory
MOQ: 1 |

ATSAMD20G16B-AU گشتی

The Microchip Technology ATSAMD20G16B-AU is a 32-bit ARM Cortex-M0+ flash microcontroller operating up to 48 MHz, with 64 KB of flash memory, 8 KB of SRAM, and a 48-pin TQFP package measuring 7 x 7 mm. It is intended for compact embedded systems that require efficient control processing, flexible serial communications, and embedded memory in an industrial-temperature device.

A microcontroller is an embedded-control semiconductor that integrates a processor core, program memory, data memory, and peripherals on one device. The ATSAMD20G16B-AU belongs to the SAM D20 family and uses the low-power ARM Cortex-M0+ architecture. This hierarchy places it within 32-bit embedded microcontrollers and supports cost-sensitive applications that need more capability than an 8-bit controller without the complexity of a high-performance application processor.

The device provides 64 KB of flash for firmware and 8 KB of SRAM for working data, while its Cortex-M0+ core supports operation up to 48 MHz. The industrial-temperature ordering option, indicated by the -AU suffix in the distributor listing, targets embedded equipment operating in extended commercial and industrial environments. Its 48-TQFP package provides a conventional gull-wing footprint that can be inspected and assembled with standard surface-mount production processes.

Microchip identifies the ATSAMD20G16 family as suitable for home automation, consumer, metering, and industrial applications. This positioning reflects the combination of embedded flash, SRAM, low-power processing, and communication peripherals in one device. Compared with a discrete processor design, the integrated MCU reduces board complexity and simplifies firmware-based control of sensors, actuators, communications, and human-interface functions.

Typical uses include connected home equipment, utility and resource metering, compact consumer controls, sensor nodes, and industrial monitoring modules. The device is particularly appropriate when a 48 MHz control loop, local data buffering, and multiple serial interfaces are required, but a higher-end processor and its additional power or cost would be unnecessary. Firmware should validate the selected peripheral configuration against the final board schematic.

The main engineering consideration is package and pin compatibility. Before replacing another 48-TQFP device, confirm that power, ground, reset, programming, clock, and every used peripheral signal occupy the same pins. Validate startup behavior, memory size assumptions, and firmware dependencies because a shared package does not by itself guarantee functional interchangeability.

This page combines manufacturer device positioning, distributor listings, package and memory details, practical application guidance, and a strict review of same-package alternatives. It also distinguishes electrically similar devices from confirmed drop-in replacements so engineers can make a defensible sourcing decision before layout or firmware changes.

جێگرەوەکانی جێگۆڕکێ بۆ ATSAMD20G16B-AU — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ATSAMD20G16B-AU (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, MSL Level, Operating Temperature, SERCOM Modules, SRAM.

Microchip Technology
Package: 48-TQFP (7x7 mm)
SERCOM Modules: Up to 6 (configurable as UART/SPI/I2C)
SRAM: 2 KB
بەراوردکردن لەگەڵ ATSAMD20G16B-AU →
Microchip Technology
Package: 48-pin TQFP (7x7 mm)
MSL Level: 3 (per JEDEC J-STD-020)
Operating Temperature: -40 C to +105 C
بەراوردکردن لەگەڵ ATSAMD20G16B-AU →
Microchip Technology
Package: 48-TQFP (7x7 mm)
MSL Level: 3
Operating Temperature: -40 °C to +85 °C (Industrial)
بەراوردکردن لەگەڵ ATSAMD20G16B-AU →
Microchip Technology
Package: 48-pin TQFP (7x7 mm)
MSL Level: MSL3 (per JEDEC J-STD-020)
Operating Temperature: -40 C to +85 C (industrial)
بەراوردکردن لەگەڵ ATSAMD20G16B-AU →

ATSAMD20G16B-AN

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 48-TQFP (7x7)
ARM Cortex-M0+ (32-bit) · 48 MHz · 2.46 · 64 KB (64K x 8) · 8 KB · 1.6 V to 3.6 V · -40 C to +105 C · 48-pin TQFP (7x7 mm)

پەیوەندی بۆ نرخ

بینینی داتاشیت →

ATSAMD21G16B-AU

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 48-TQFP (7x7)
ARM Cortex-M0+ (32-bit) · SAM D21G · 48 MHz · 2.46 · 64 KB (in-system self-programmable) · 8 KB · 1.62 V to 3.63 V · 38 (maximum)

پەیوەندی بۆ نرخ

بینینی داتاشیت →

ATSAMD20J16-AU

✅ جێگرەوەی ڕاستەوخۆ
📦 48-TQFP (7x7)
SAM D20J peripheral configuration replaces SAM D20G; CPU speed and memory remain 48 MHz, 64 KB flash, and 8 KB SRAM, with 0 MHz and 0 KB differences

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

ATSAMD20G16B-AU زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type 32-bit ARM Cortex-M0+ Flash Microcontroller
Maximum CPU Frequency 48 MHz
Flash Memory 64 KB
Program Memory Organization 64K x 8 bits
SRAM 8 KB
CPU Architecture ARM Cortex-M0+
Instruction Width 32 bit
پاکێج 48-TQFP, 7 x 7 mm
ژمارەی پین 48 pins
جۆری دامەزراندن Surface Mount
Temperature Grade Industrial
Operating Voltage Range 1.6 V to 3.6 V
Green Compliance Green

ڕێنمایی ڕێکخستنی پینی ATSAMD20G16B-AU 48-tqfp, 7 x 7 mm

ڕێکخستنی پین بۆ ATSAMD20G16B-AU (پاکێجی 48-tqfp, 7 x 7 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 48-tqfp, 7 x 7 mm بۆ ATSAMD20G16B-AU

هیچ داتای وردی پینئاوت بەردەست نییە بۆ ATSAMD20G16B-AU.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

ATSAMD20G16B-AU گونجاوە بۆ 6 بەکارھێنانs: Home Automation Control, Utility and Resource Metering, Industrial Sensor Nodes, Consumer Appliance Controls, IoT Edge Gateways, Security and Access Controls.

🧩

Home Automation Control

The ATSAMD20G16B-AU fits distributed home-automation controllers that must combine local decisions with serial connectivity. Its 48 MHz ARM Cortex-M0+ core provides processing capacity for event handling, while 64 KB of flash accommodates firmware and 8 KB of SRAM supports temporary state, protocol buffers, and scheduling data. The device can supervise sensors, drive relays, and maintain a local control loop without an external processor. Because the SAM D20 family is identified for home automation, the MCU aligns with compact wall controllers, appliance interfaces, and connected building modules. The industrial-grade option should be checked against the enclosure temperature and power environment before production release.

🏭

Utility and Resource Metering

The ATSAMD20G16B-AU is suitable for metering modules that acquire sensor data, maintain a running count, and transmit results over a serial interface. The 32-bit Cortex-M0+ core operates up to 48 MHz, allowing the firmware to combine sampling, filtering, calibration logic, and communication tasks in one device. Its 64 KB flash stores application code and parameters, while 8 KB of SRAM supports acquisition buffers and protocol state. Microchip expressly identifies metering among the ATSAMD20G16 family’s target applications. For a battery-powered meter, engineers should still verify sleep-mode behavior, analog accuracy, and average current from the manufacturer documentation before choosing the power architecture.

🏭

Industrial Sensor Nodes

The ATSAMD20G16B-AU fits compact industrial sensor nodes that need local measurement processing and network-ready serial communications. Its 48 MHz Cortex-M0+ core can service multiple interrupt-driven peripherals, while 64 KB of flash and 8 KB of SRAM are sufficient for protocol stacks, calibration tables, and short acquisition buffers. The device is intended for industrial applications by Microchip, and the exact -AU ordering option is listed as industrial grade. A typical implementation places the MCU between the sensing front end and a UART, SPI, or I2C transceiver, with firmware managing configuration, diagnostics, and data reporting. Validate EMC immunity, enclosure temperature, and long-term memory retention for the deployed environment.

⚡

Consumer Appliance Controls

The ATSAMD20G16B-AU can serve as the embedded controller in a compact consumer appliance where a dedicated MCU must coordinate user inputs, indicators, motors, and communications. Its 48 MHz Cortex-M0+ processing, 64 KB flash, and 8 KB SRAM provide enough local memory for a real-time control loop and moderate protocol stack. The integrated device reduces the component count associated with separate logic and memory, while the 48-TQFP package supports conventional PCB assembly and inspection. Use the peripheral configuration to map buttons, displays, sensors, and actuator drivers. Firmware should include safe state transitions for power loss, and the finished product must verify the industrial-temperature option against its internal enclosure temperature.

🌐

IoT Edge Gateways

The ATSAMD20G16B-AU is appropriate for low-power IoT edge nodes that convert local sensor or switch data into a network message. The Cortex-M0+ core operates at up to 48 MHz, enabling the firmware to handle framing, protocol checks, configuration, and control logic concurrently, while 64 KB of flash and 8 KB of SRAM support embedded networking routines and message buffers. It is especially useful when a small, deterministic control MCU is preferable to a higher-power application processor. The SAM D20 family’s home-automation and industrial positioning supports connected equipment, embedded gateways, and local supervisory nodes. Confirm the exact serial peripheral, clock configuration, and low-power requirements in the manufacturer documentation before selecting the final board architecture.

🎥

Security and Access Controls

The ATSAMD20G16B-AU can support compact access-control and security peripherals that coordinate credential inputs, status indicators, locks, and network reporting. Its 48 MHz Cortex-M0+ core provides deterministic embedded processing, and the 64 KB flash plus 8 KB SRAM provide storage for control code, configuration data, and short transaction buffers. The device is suitable for battery-operated or low-power embedded security equipment when energy-efficient operation and deterministic response are priorities. In a reader design, the MCU can manage a serial credential interface, debounce local inputs, update an output state, and report activity through a communications transceiver. Security-critical production designs must add appropriate authentication, anti-tamper, and secure-update measures beyond the MCU’s basic embedded-control function.

کورتەی بەرهەمە پێشنیارکراوەکان

What is the ATSAMD20G16B-AU?
The ATSAMD20G16B-AU is a 32-bit ARM Cortex-M0+ flash microcontroller from Microchip Technology, operating up to 48 MHz with 64 KB of flash and 8 KB of SRAM. According to the Microchip ATSAMD20G16 product page, the family is intended for home automation, consumer, metering, and industrial applications. The device is supplied in a 48-TQFP package measuring 7 x 7 mm.
What are the key specifications of ATSAMD20G16B-AU?
The principal ATSAMD20G16B-AU specifications are a 32-bit ARM Cortex-M0+ core, 48 MHz maximum operating frequency, 64 KB of flash, 8 KB of SRAM, and a 48-pin 7 x 7 mm TQFP package. Microchip’s ATSAMD20G16 product page confirms the memory and processing specifications, while the distributor listing identifies the exact -AU orderable device as industrial-grade and green.
How much flash and SRAM does ATSAMD20G16B-AU have?
The ATSAMD20G16B-AU provides 64 KB of flash memory and 8 KB of SRAM. According to the Microchip ATSAMD20G16 product page, flash stores the firmware while SRAM supplies volatile working memory. The DigiKey listing also identifies the programmed flash organization as 64K x 8 bits, consistent with 32-bit firmware execution from a byte-organized flash array.
What is the operating voltage of ATSAMD20G16B-AU?
The ATSAMD20G16B-AU operates from 1.6 V to 3.6 V. The voltage rating appears in the Microchip ATSAMD20G16B family distributor information. Designers should verify individual peripheral and analog operating constraints in the manufacturer datasheet before committing a regulator or battery configuration, especially when the system uses the upper or lower end of the range.
Where can I download the ATSAMD20G16B-AU datasheet PDF?
The official ATSAMD20G16B-AU documentation starts with the Microchip Technology ATSAMD20G16 product page at https://www.microchip.com/en-us/product/ATSAMD20G16. Use the datasheet and supporting documents linked from that page for the authoritative device description, electrical characteristics, pin assignments, and ordering information. The product page is preferable to informal PDF mirrors because it identifies the current manufacturer document.
Where can I find the ATSAMD20G16B-AU pinout?
The ATSAMD20G16B-AU pinout is assigned in the Microchip manufacturer datasheet and package documentation for the 48-TQFP variant. Use the pin-description table and package drawing to map PA, PB, and other peripheral functions. The ATSAMD20G16B package diagram available through the ATSAMD20G16 product page can also be used as a visual cross-check before assigning PCB tracks.
ATSAMD20G16B-AU vs ATSAMD21G16B-AU: which is better for a new design?
Choose the ATSAMD21G16B-AU when its functional-safety feature set is required; otherwise, the ATSAMD20G16B-AU may be appropriate for a straightforward control design. Both are listed as 48 MHz, 64 KB-flash, 8 KB-SRAM devices in 48-TQFP packages, but the shared specifications do not establish pin-to-pin compatibility. The manufacturer pin tables and application requirements should decide the selection.
What is the difference between ATSAMD20G16B-AU and ATSAMD20G16B-AN?
The ATSAMD20G16B-AU is identified as an industrial-grade, green 48-TQFP device, while the ATSAMD20G16B-AN listing identifies a 105 °C grade device with the same 48 MHz, 64 KB-flash, 8 KB-SRAM configuration. Their ordering codes indicate different temperature and environmental options. Confirm the exact temperature ratings, marking, qualification status, and purchase configuration before treating the devices as interchangeable.
When should I choose ATSAMD20G16B-AU over ATSAMD21G16B-AU?
Choose the ATSAMD20G16B-AU when the design only requires its 48 MHz Cortex-M0+ performance, 64 KB flash, 8 KB SRAM, and the peripherals available in the SAM D20G device. Consider the ATSAMD21G16B-AU when a SAM D21G feature or functional-safety capability is specifically required. The choice should follow a complete peripheral, clock, memory, and pin-assignment review rather than package similarity alone.
Is ATSAMD20G16B-AU suitable for industrial metering equipment?
Yes, the ATSAMD20G16B-AU is suitable for metering applications when its electrical and environmental limits fit the product. Microchip identifies the ATSAMD20G16 family for metering and industrial equipment, and the -AU listing is categorized as industrial temperature with a 1.6 V to 3.6 V supply range. Validate accuracy, EMC, environmental, and safety requirements at the finished-system level.
What can replace ATSAMD20G16B-AU?
A replacement for ATSAMD20G16B-AU must use the 48-TQFP footprint and preserve the electrical function of every connected pin, not merely match CPU speed and memory. The ATSAMD20G16B-AN is the closest identified same-brand ordering option for review, while ATSAMD21G16B-AU shares the major memory, speed, and package figures but has a different family. No confirmed universal drop-in replacement is established here.
Is ATSAMD20G16B-AU the same as ATSAMD21G16B-AU?
No, the ATSAMD20G16B-AU and ATSAMD21G16B-AU belong to different SAM D microcontroller families. Both are listed with a 48 MHz Cortex-M0+ core, 64 KB flash, 8 KB SRAM, and a 48-TQFP package, but that parameter overlap does not make them the same device. Peripheral assignments, safety features, and pin behavior must be compared before replacement.
Where can I buy ATSAMD20G16B-AU online?
Use the Request a Quote form on this page to request ATSAMD20G16B-AU availability, lead time, and ordering support. The exact device is listed by authorized distribution channels, but live inventory and order acceptance can change without notice. The manufacturer product page at https://www.microchip.com/en-us/product/ATSAMD20G16 also provides the authoritative device and documentation links.
What is the price of ATSAMD20G16B-AU?
The current ATSAMD20G16B-AU price is generated through the Request a Quote form on this page. Pricing depends on order quantity, packaging configuration, distributor inventory, and purchasing terms, so a static figure can become obsolete. Submit the required quantity and target package information in the quote request to receive a current commercial response.
What is the lead time for ATSAMD20G16B-AU?
Request the current ATSAMD20G16B-AU lead time and minimum order quantity through the Request a Quote form on this page. Lead time depends on factory availability, authorized-channel inventory, and the quantity being ordered. For production planning, provide the annual demand, forecast window, and required package configuration so the supplier can confirm the most relevant schedule.

داتای سەرچاوەی ئەندازیاری بۆ ATSAMD20G16B-AU — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Select the ATSAMD20G16B-AU for an embedded-control design that requires a 48 MHz ARM Cortex-M0+ core, 64 KB flash, 8 KB SRAM, and the SAM D20G peripheral configuration in a 48-TQFP package. It is a logical choice for home automation, metering, consumer, and industrial applications where the listed industrial grade is appropriate. Consider the ATSAMD20G16B-AN when the documented 105 °C ordering option matches a higher-temperature requirement. Choose the ATSAMD21G16B-AU when its functional-safety designation and SAM D21G feature set are required. Review the ATSAMD20J16-AU when its peripheral mix better matches the design. Before replacing an installed MCU, verify every used pin, reset and programming behavior, clock setup, peripheral mapping, firmware dependencies, and environmental rating. Similar CPU speed, memory capacity, and package dimensions are necessary comparison points but do not alone establish functional drop-in equivalence.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە ATSAMD20G16B-AN ATSAMD21G16B-AU ATSAMD20J16-AU
Package 48-TQFP (7x7) 48-TQFP (7x7) 48-TQFP (7x7) 48-TQFP (7x7)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
CPU Core ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+
Maximum CPU Frequency 48 MHz 48 MHz 48 MHz 48 MHz
Flash Memory 64 KB 64 KB 64 KB 64 KB
SRAM 8 KB 8 KB 8 KB 8 KB

جیاکەرەوە سەرەکییەکان

  • Lower-complexity SAM D20G family positioning (بەراورد بەATSAMD21G16B-AU)
  • Industrial-grade ordering configuration (بەراورد بەATSAMD20G16B-AN)
  • 64 KB flash and 8 KB SRAM in a compact 48-TQFP device (بەراورد بەATSAMD20J16-AU)

تێبینییەکانی دیزاین

Do not treat a shared 48-TQFP package as proof of interchangeability. Compare the manufacturer pin tables for power, ground, reset, programming, clock, communication, and every peripheral signal used by the PCB. The ATSAMD20G16B-AN, ATSAMD21G16B-AU, and ATSAMD20J16-AU candidates have relevant parameter similarities, but their family and temperature characteristics differ; validate the exact behavior and update firmware initialization where required.

Design the 1.6 V to 3.6 V supply rail with margin for startup, transients, and the highest operating temperature required by the finished product. Confirm the regulator’s load capability, noise, and enable sequence against the ATSAMD20G16B-AU operating limits. Decoupling values and placement should follow the manufacturer’s recommended power and grounding layout, with the highest-current supply and ground paths kept compact around the device.

Preserve the 48-TQFP footprint and follow the manufacturer package drawing for land pattern, solder mask, paste, and exposed thermal requirements. Route sensitive clock, programming, and communication signals away from high-current switching nodes and noisy peripherals. If programming-test access is required, preserve the relevant SWD or programming pads and add test points that can be reached without disturbing the assembled board.

Confirm the exact operating frequency and external-clock configuration before applying a speed-oriented layout or peripheral clocking scheme. The ATSAMD20G16B-AU runs up to 48 MHz, but the highest safe operating rate and peripheral timing depend on the complete electrical configuration. Use short return paths, continuous ground references, and manufacturer-recommended decoupling to limit susceptibility to switching noise and ringing.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The distributor listing identifies the exact device as green, but no formal RoHS, REACH, halogen-free, or conflict-minerals declaration was established. AEC-Q100 status is not stated and is therefore not applicable rather than qualified.

داتا پشتڕاستکراوەتەوە لە: 2026-11-15 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

ATSAMD20G16B-AU ATSAMD20G16B-AU datasheet ATSAMD20G16B-AU datasheet pdf ATSAMD20G16B-AU pinout ATSAMD20G16B-AU specifications ATSAMD20G16B-AU equivalent ATSAMD20G16B-AU replacement ATSAMD20G16B-AU vs ATSAMD21G16B-AU ATSAMD20G16B-AU footprint Microchip ATSAMD20G16B-AU ATSAMD20G16B-AU price ATSAMD20G16B-AU stock ATSAMD20G16 48 TQFP pinout ATSAMD20G16 home automation controller

پێکهاتە و زاراوە پەیوەندیدارەکان

Microchip Technology ATSAMD20G16B-AU ATSAMD20G16B-AN ATSAMD21G16B-AU ATSAMD20J16-AU SAM D20 SAM D21G ARM Cortex-M0+ 32-bit microcontroller embedded microcontroller flash microcontroller semiconductor 48 MHz 64 KB flash 8 KB SRAM 48-TQFP QFN family surface mount SMD home automation utility metering industrial sensor node IoT edge node functional safety 1.6 V to 3.6 V
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ