ATSAMD21G16B-MU - 48MHz Cortex-M0+ MCU | Microchip
MPN: ATSAMD21G16B-MU ✓ چالاکATSAMD21G16B-MU گشتی
A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, volatile data memory, and peripherals into one device. The Arm Cortex-M0+ core provides a compact, low-power architecture for embedded control. Within the product hierarchy, ATSAMD21G16B-MU is an embedded microcontroller, an integrated circuit, and a semiconductor designed for compact control systems that require deterministic real-time behavior alongside analog and digital interfaces.
The ATSAMD21G16B family combines 64 KB of flash with 8 KB of SRAM and provides 38 general-purpose I/O pins. Its listed peripherals include an ADC, DAC, USART, SPI, I2C, and USB, allowing a board to consolidate multiple communication paths and analog functions. The 48 MHz operating frequency provides computational headroom for sensor processing, control loops, data acquisition, and communications while the 48-QFN package supports compact surface-mount designs.
The -40 °C to 85 °C operating-temperature range covers industrial-temperature environments. The 1.62 V to 3.63 V supply range is suitable for low-voltage embedded systems operating from regulated 3.3 V rails or compatible lower-voltage sources. Functional Safety capability can support designs that require enhanced diagnostic or safety controls, but the complete system safety case must still be evaluated against the relevant application requirements.
Typical applications include industrial sensor controllers, connected measurement equipment, USB-connected data loggers, motor and actuator control, building automation nodes, and compact consumer or medical-adjacent control systems. Its combination of 38 I/O pins, USB, serial interfaces, and analog converters makes it useful when a design would otherwise require a separate microcontroller and communication or analog interface devices.
PCB design should preserve the exposed thermal-pad connection specified by the manufacturer and place decoupling capacitors close to the appropriate supply pins. Because the QFN footprint provides fine-pitch routing and limited inspection access, assembly should use a qualified stencil and paste process, while programming and test access should be planned into the board layout.
This page combines manufacturer specifications, verified ordering information, functional drop-in alternatives, application guidance, and design notes to support component selection and PCB implementation. It also distinguishes the QFN package from the otherwise similar TQFP options, helping engineers verify footprint compatibility before committing a board layout.
جێگرەوەکانی جێگۆڕکێ بۆ ATSAMD21G16B-MU — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ATSAMD21G16B-MU (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Debug Interface, Functional Safety, Operating Temperature Range, RoHS Status.
ATSAMD21G15B-MU
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ATSAMD21G16B-MU زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 32-bit microcontroller |
| Processor Core | Arm Cortex-M0+ |
| زۆرترین فرێکوێنسیی کاتژمێر | 48 MHz |
| Flash Memory | 64 KB |
| SRAM | 8 KB |
| General-Purpose I/O Pins | 38 pins |
| Operating Voltage Range | 1.62 V to 3.63 V |
| مەودای پلەی گەرمیی کارکردن | -40 °C to 85 °C |
| پاکێج | 48-QFN (7 mm × 7 mm) |
| جۆری دامەزراندن | Surface mount |
| Carrier Type | Tray |
| Analog-to-Digital Converter | Available |
| Digital-to-Analog Converter | Available |
| Serial Interfaces | USART, SPI, and I2C |
| USB Interface | Available |
| Functional Safety | Functional Safety (FuSa) capable |
ڕێنمایی ڕێکخستنی پینی ATSAMD21G16B-MU 48-qfn (7 mm × 7 mm)
ڕێکخستنی پین بۆ ATSAMD21G16B-MU (پاکێجی 48-qfn (7 mm × 7 mm)). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ ATSAMD21G16B-MU.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
ATSAMD21G16B-MU گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor Controller, USB Connected Data Logger, Building Automation Node, Motor and Actuator Control, USB Type-C Accessory Controller, Compact Instrumentation Controller.
Industrial Sensor Controller
ATSAMD21G16B-MU fits an industrial sensor controller that combines analog measurement with local decision-making. Its 48 MHz Arm Cortex-M0+ core can run acquisition and filtering loops, while the listed ADC supports sensor conversion and the DAC can generate an analog reference or test stimulus. With 38 general-purpose I/O pins, the controller can connect discrete sensors, indicators, and actuators without requiring a separate I/O expander. The 1.62 V to 3.63 V operating range suits regulated low-voltage industrial rails, and the -40 °C to 85 °C rating supports temperature-controlled equipment. Design the analog and digital return paths carefully, place supply decoupling close to the device, and validate the ADC reference and acquisition timing in the final board.
پێشنیارکراو
USB Connected Data Logger
ATSAMD21G16B-MU is suitable for a USB-connected data logger because it combines a 48 MHz Cortex-M0+ processor, 64 KB of flash, 8 KB of SRAM, and a listed USB interface. Firmware can acquire sensor data through the ADC, format records locally, and transfer them to a host over USB while retaining SPI or I2C for external sensors and storage. Its 38 I/O pins provide additional status, trigger, and communications connections. The 1.62 V to 3.63 V range permits operation from a regulated 3.3 V system, while the -40 °C to 85 °C range supports equipment outside consumer-only temperature limits. USB routing and grounding should follow the manufacturer interface guidance, with protection appropriate to the external connector environment.
پێشنیارکراو
Building Automation Node
ATSAMD21G16B-MU can serve as a low-power building-automation node that reads environmental sensors and communicates with controllers over an industrial bus. Its available USART, SPI, and I2C interfaces support local sensors, memory, and transceiver connections, while the ADC handles analog inputs and the DAC can provide an analog control output. At 48 MHz, the Cortex-M0+ core has sufficient performance for protocol handling, scheduled sampling, and local control logic. The 38 I/O pins are useful for status indicators, occupancy inputs, relay-control signals, and service interfaces. The 1.62 V to 3.63 V operating range supports centralized low-voltage power, and the -40 °C to 85 °C rating is appropriate for many indoor and controlled industrial enclosures.
پێشنیارکراو
Motor and Actuator Control
ATSAMD21G16B-MU is appropriate for compact motor and actuator controllers that need deterministic digital control plus analog feedback. The 48 MHz Cortex-M0+ core can execute position or speed-control algorithms, process current or position feedback through the ADC, and generate control signals through timer PWM functions. Its 38 I/O pins leave capacity for encoder inputs, switch inputs, status LEDs, and communications. The device operates from 1.62 V to 3.63 V, which makes it suitable for systems using a regulated low-voltage motor-control architecture. The -40 °C to 85 °C range supports industrial-temperature products. External transistors or motor drivers remain necessary for load current, and the final design must include appropriate protection, thermal analysis, and noise separation between switching stages and sensitive feedback circuitry.
پێشنیارکراو
USB Type-C Accessory Controller
ATSAMD21G16B-MU can manage a compact USB Type-C accessory that performs device control, status reporting, and configuration updates. The integrated USB capability provides a direct path to a host, while USART, SPI, and I2C support displays, sensors, memories, and configuration devices. Its 64 KB of flash and 8 KB of SRAM are suitable for moderate protocol, control, and data-handling workloads, and the 48 MHz Cortex-M0+ core supports responsive USB scheduling. The 48-QFN package is especially useful where accessory-board area is constrained. The listed 1.62 V to 3.63 V operating range supports regulated 3.3 V designs, although the complete USB Type-C power-delivery and protection architecture must be implemented separately. Follow the device USB layout guidance and provide connector-side protection before external cable attachment.
پێشنیارکراو
Compact Instrumentation Controller
ATSAMD21G16B-MU fits compact instrumentation that must combine data acquisition, calibration, and host communication. The ADC handles analog measurement channels, the DAC supports stimulus or reference generation, and the available USART, SPI, I2C, and USB interfaces provide multiple ways to connect instruments, memory, and service ports. A 48 MHz Cortex-M0+ core can process measurements while the 64 KB flash accommodates firmware, tables, and configuration parameters. Its 38 I/O pins support front-panel controls, trigger signals, and status indicators. With operation from 1.62 V to 3.63 V and a -40 °C to 85 °C temperature range, the device fits low-voltage industrial and professional measurement equipment. Reference grounding, calibration storage, and analog filtering should be evaluated as part of the complete signal chain.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ ATSAMD21G16B-MU — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | ATSAMD21G15B-MU |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 48-QFN (7 mm × 7 mm) | 48-QFN (7 mm × 7 mm) |
| Processor Core | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum Clock Frequency | 48 MHz | 48 MHz |
| Flash Memory | 64 KB | 32 KB (-50%) |
| SRAM | 8 KB | 8 KB |
| Operating Voltage Range | 1.62 V to 3.63 V | 1.62 V to 3.63 V |
| Operating Temperature Range | -40 °C to 85 °C | -40 °C to 85 °C |
| Carrier Type | Tray | Tray |
جیاکەرەوە سەرەکییەکان
- Twice the flash memory of the identified same-package alternative (بەراورد بەATSAMD21G15B-MU)
- Identical processing clock and SRAM in the same QFN footprint (بەراورد بەATSAMD21G15B-MU)
- Same low-voltage operating envelope for industrial embedded systems (بەراورد بەATSAMD21G15B-MU)
تێبینییەکانی دیزاین
Use the 48-QFN manufacturer land pattern and preserve the exposed-pad connection, solder mask, and paste pattern specified in the package drawing. The exposed pad is part of the thermal and electrical structure and should not be treated as an optional ground area. Place input and output decoupling capacitors close to their associated supply pins with short return paths. Because QFN terminals are difficult to inspect after assembly, consider the package orientation, panelization, and assembly process during PCB release.
Budget the core, analog, USB, and I/O loads independently when selecting the 3.3 V supply and nearby components. The operating range of 1.62 V to 3.63 V does not imply that every peripheral can operate correctly at every point without checking the electrical-characteristics tables. Keep switching-converter and motor-drive power paths away from ADC and DAC references, and verify the external USB protection network separately so transient energy is not directed into the microcontroller pins.
Assign the multiplexed functions shown in the manufacturer pin-description table before routing the PCB. A single pad can serve several peripheral functions, so changing a UART, SPI, or I2C assignment can move related signals to different pins. Reserve programming and test access, use continuous ground references where possible, and route high-current or fast-switching nets away from sensitive analog inputs. After finalizing pin multiplexing, recheck every trace against the selected 48-QFN pinout.
Do not substitute the 48-TQFP ATSAMD21G16B-AU for ATSAMD21G16B-MU on an existing QFN PCB; the lead geometry and land pattern differ even though the core and memory configuration are similar. Also avoid treating ATSAMD21G15B-MU as an unconditional replacement because its flash capacity is 32 KB rather than 64 KB. Confirm package, pin multiplexing, peripheral availability, programming requirements, and firmware size before approving either substitution.
زانیاری پابەندبوون
The product is identified as Functional Safety capable, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was confirmed. The Mouser listing describes the device as green and 3.3 V capable, but that wording alone was not treated as proof of every compliance category.