Microchip Technology

ATTINY48-MMH - 12MHz 4KB 8-Bit AVR Microcontroller | Microchip

MPN: ATTINY48-MMH ✓ چالاک
1.8 V to 5.5 V Vdss 28-pin VQFN, 4 mm x 4 mm Package 12 MHz Speed 4 KB (2K x 16) Memory
MOQ: 1 |

ATTINY48-MMH گشتی

The Microchip Technology ATTINY48-MMH is a picoPower 8-bit AVR RISC-based microcontroller with 4 KB of in-system programmable Flash, 64 bytes of EEPROM, 256 bytes of SRAM, and a maximum operating frequency of 12 MHz, housed in a 28-pin VQFN package measuring 4 mm by 4 mm. Its operating voltage range is 1.8 V to 5.5 V.

An 8-bit AVR microcontroller is a compact embedded-control processor that executes instructions using an AVR reduced-instruction-set-compute architecture. The ATTINY48 combines processor, Flash program memory, data EEPROM, SRAM, timers, communication peripherals, and a 10-bit analog-to-digital converter in one integrated circuit. Within the product hierarchy, it belongs to the ATtiny family of low-power, resource-constrained embedded controllers.

The ATTINY48-MMH provides 4 KB of ISP Flash organized as 2K by 16, 64 bytes of EEPROM, and 256 bytes of SRAM. Its peripheral set includes an 8-bit timer/counter, a 16-bit timer/counter with PWM, a 10-bit ADC, SPI, and debugWIRE on-chip debugging. According to the Microchip product page, the device can execute up to 12 MIPS at a 12 MHz clock.

The device's single-cycle instruction execution supports responsive control without the overhead of a higher-power processor architecture. Its 1.8 V to 5.5 V operating range permits use in both low-voltage and conventional 5 V systems, although the complete operating specification must be checked against the manufacturer datasheet for each voltage and frequency combination. SPI and debugWIRE provide practical options for compact production programming and in-circuit debugging.

Typical uses include low-power sensor nodes, compact control panels, LED sequencing equipment, battery-operated accessories, and embedded accessories that require local analog measurement. The 10-bit ADC supports sensor conditioning, while the 16-bit PWM timer/counter is useful for motor, lighting, and periodic control functions. The 256-byte SRAM is modest, so application firmware should control buffer usage.

PCB design should preserve access to the programming and debug interfaces and route sensitive analog inputs away from switching nodes. The exposed thermal pad requires the land pattern and assembly process specified by the manufacturer datasheet. Confirm decoupling, exposed-pad, and exposed-pad thermal-pad solder requirements before releasing a layout for volume production.

This page consolidates the ATTINY48-MMH specifications, sourcing guidance, pinout considerations, application fit, and drop-in replacement status into one design-focused reference. It also highlights where an identical footprint alone is insufficient to qualify a substitute, helping engineers evaluate PCB reuse, firmware compatibility, memory requirements, and peripheral differences before making a component change.

جێگرەوەکانی جێگۆڕکێ بۆ ATTINY48-MMH — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ATTINY48-MMH (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Architecture, Debug Interface, Flash Memory, Package, Programming Interface.

Microchip Technology
Architecture: picoPower AVR
Debug Interface: In-circuit debugging
Flash Memory: 8 KB (4K x 16)
بەراوردکردن لەگەڵ ATTINY48-MMH →

هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.

داوای جێگرەوەکان بکە

ATTINY48-MMH زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Microcontroller Type 8-bit AVR RISC-based microcontroller
Series ATtiny
Architecture AVR
زۆرترین فرێکوێنسیی کاتژمێر 12 MHz
Maximum Throughput 12 MIPS at 12 MHz
Operating Voltage Range 1.8 V to 5.5 V
Flash Memory 4 KB (2K x 16)
EEPROM 64 bytes
SRAM 256 bytes
ADC Resolution 10-bit
Timer/Counter 1 8-bit timer/counter
Timer/Counter 2 16-bit timer/counter with PWM
Serial Interface SPI
Debug Interface debugWIRE
Programming Interface In-system programming
پاکێج 28-pin VQFN, 4 mm x 4 mm
Exposed Thermal Pad Present
جۆری دامەزراندن Surface mount

ڕێنمایی ڕێکخستنی پینی ATTINY48-MMH 28-pin vqfn, 4 mm x 4 mm

ڕێکخستنی پین بۆ ATTINY48-MMH (پاکێجی 28-pin vqfn, 4 mm x 4 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 28-pin vqfn, 4 mm x 4 mm بۆ ATTINY48-MMH

هیچ داتای وردی پینئاوت بەردەست نییە بۆ ATTINY48-MMH.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

ATTINY48-MMH گونجاوە بۆ 6 بەکارھێنانs: Low-Power Sensor Node, LED Lighting Controller, Battery-Powered Accessory, Industrial Control Panel, Compact Motor Controller, Portable Data-Acquisition Module.

🧩

Low-Power Sensor Node

The ATTINY48-MMH fits compact sensor nodes that need local analog measurement, event processing, and periodic wireless updates. Its 10-bit ADC can sample sensor signals, while 256 bytes of SRAM supports modest buffering and state management. The 1.8 V to 5.5 V operating range permits deployment across low-energy and 5 V systems. At up to 12 MHz, the AVR core provides up to 12 MIPS, allowing local filtering before data is transferred through SPI. Use the timer/counter blocks for periodic sampling and sleep wake-up, and validate average current against the system duty cycle.

💡

LED Lighting Controller

The ATTINY48-MMH is appropriate for compact LED sequencing, status indication, and dimming control. Its 16-bit timer/counter with PWM can generate repeatable modulation signals for multiple lighting channels, while the 8-bit timer/counter supports additional timing tasks. The 4 KB Flash capacity is suitable for small state machines and animation tables without a large external memory device. Place the PWM outputs according to the manufacturer pin description and keep high-current LED drive transistors outside the controller so the VQFN device remains responsible only for logic-level control.

🔋

Battery-Powered Accessory

The ATTINY48-MMH can serve as the central controller in a battery-powered accessory because its picoPower AVR design operates from 1.8 V to 5.5 V and includes both 8-bit and 16-bit timer/counters. The timer blocks support efficient periodic measurement, button handling, and motor timing, while the 10-bit ADC can monitor a battery or sensor input. The 4 KB Flash and 256-byte SRAM suit focused firmware rather than elaborate connectivity stacks. For low standby demand, use a low-power operating mode and confirm wake-up timing and current consumption in the manufacturer datasheet.

🏭

Industrial Control Panel

The ATTINY48-MMH is suitable for a small control panel that coordinates discrete inputs, indicators, and basic analog measurements. Its 10-bit ADC handles sensor and potentiometer inputs, while the two timer/counter sections divide timing and PWM duties across the firmware. The SPI interface can connect to a local display or serial peripheral when the panel remains compact. Because the device has 256 bytes of SRAM, screen and protocol buffers should be carefully bounded. Verify the exposed-pad land pattern and connector grounding to preserve signal integrity around the 12 MHz control logic.

🤖

Compact Motor Controller

The ATTINY48-MMH can coordinate a small motor or actuator system where timing accuracy and a compact footprint matter. Its 16-bit PWM timer/counter supports motor-speed modulation, while the 8-bit timer/counter can provide complementary timing functions. The controller can also monitor a current or position sensor through the 10-bit ADC and exchange commands through SPI. Motor circuitry should include its own driver, protection, and bulk decoupling because the microcontroller does not directly replace a power stage. Check timer outputs and alternate-function pins against the specific package drawing before routing the board.

📡

Portable Data-Acquisition Module

The ATTINY48-MMH works well in a small data-acquisition module that converts analog inputs into compact serialized measurements. The 10-bit ADC provides the measurement front end, while SPI can move data to a host or storage controller. With 256 bytes of SRAM and 64 bytes of EEPROM, the device is best suited to streaming or short-batch acquisition rather than large offline datasets. A timer can establish uniform sampling intervals, and the 12 MHz maximum clock supports responsive acquisition loops. Apply input filtering and define scaling in fixed-point arithmetic to avoid unnecessary floating-point overhead.

What are the key specifications of ATTINY48-MMH that engineers should know?
The ATTINY48-MMH is an 8-bit AVR microcontroller rated for up to 12 MHz operation, with 4 KB of ISP Flash, 64 bytes of EEPROM, 256 bytes of SRAM, and a 1.8 V to 5.5 V supply range. It also includes a 10-bit ADC, SPI, debugWIRE, and both 8-bit and 16-bit timers. According to the Microchip ATtiny48 product page, the controller reaches up to 12 MIPS at 12 MHz and is packaged in a 28-pin VQFN.
Where can I download the ATTINY48-MMH datasheet PDF?
The ATTINY48-MMH datasheet and product information are available through the official Microchip ATtiny48 product page at https://www.microchip.com/en-us/product/ATTINY48. Search the page's Documents and Resources section for the ATtiny48 datasheet and select the package-specific ordering information. The manufacturer page identifies the ATTINY48-MMH as the 28-pin VQFN configuration and provides the authoritative electrical and pin descriptions.
Where can I find the ATTINY48-MMH pinout?
Use the pin-description table in the Microchip ATtiny48 manufacturer datasheet to obtain the ATTINY48-MMH pinout for the 28-pin VQFN package. The exposed-pad arrangement and numbered pad assignments must be taken from the package drawing rather than inferred from the generic ATtiny48 diagrams. XAIPART intentionally does not reproduce an unverified pad list on this page because incorrect pad assignments can damage an assembled board.
What does ATTINY48-MMH stand for, and what type of controller is it?
ATTINY48-MMH identifies a Microchip Technology ATtiny48-family microcontroller in a specific 28-pin VQFN package ordering code. It is an 8-bit, RISC-based AVR embedded controller with 4 KB of ISP Flash, 64 bytes of EEPROM, and 256 bytes of SRAM. The Microchip product page also identifies picoPower technology, a 10-bit ADC, SPI, debugWIRE, and 8-bit and 16-bit timer/counter blocks.
Can ATTINY48-MMH operate at 12 MHz and 5 V?
The ATTINY48-MMH supports operation from 1.8 V to 5.5 V, and its maximum listed clock frequency is 12 MHz. Microchip lists up to 12 MIPS throughput at a 12 MHz clock, so the device is suitable for a nominal 12 MHz, 5 V design when the complete datasheet operating and electrical characteristics are met. Check the manufacturer datasheet for voltage-dependent frequency limits and power-consumption behavior.
What is the difference between ATTINY48-MMH and ATTINY88-MMH?
ATTINY48-MMH and ATTINY88-MMH belong to the ATtiny family and share the 28-pin VQFN 4 mm by 4 mm package format identified in the comparison results. Their key distinction is device capacity: the ATTINY48 has 4 KB of Flash, 64 bytes of EEPROM, and 256 bytes of SRAM. Before treating the ATTINY88 as a drop-in replacement, verify its memory capacity, pin functions, voltage limits, and the behavior of firmware that depends on the smaller ATtiny48 resources.
When should I choose ATTINY48-MMH over ATTINY88-MMH?
Choose ATTINY48-MMH when a design needs only the ATtiny48's 4 KB of Flash, 64 bytes of EEPROM, and 256 bytes of SRAM and benefits from its documented 12 MHz picoPower AVR implementation. Choose ATTINY88-MMH when the firmware or data model requires the larger member's resources or a feature difference identified in the family comparison. Because both use a similar 28-pin VQFN format, compare the manufacturer pin and memory tables before changing the bill of materials.
What can replace ATTINY48-MMH on the same PCB footprint?
No confirmed drop-in replacement for ATTINY48-MMH is established by the available cross-reference results. A replacement must have the same 28-pin VQFN 4 mm by 4 mm land pattern, identical pin functions, compatible 1.8 V to 5.5 V electrical limits, equivalent clocking behavior, and sufficient memory and peripheral compatibility. Parts such as ATTINY88-MMH share the visible package format, but package similarity alone does not establish pin-to-pin and firmware-compatible substitution.
Is ATTINY48-MMH suitable for a low-power sensor node?
The ATTINY48-MMH is suitable for a compact sensor node because it combines a 10-bit ADC, 4 KB of Flash, 64 bytes of EEPROM, 256 bytes of SRAM, SPI, and timer/counters in a 4 mm by 4 mm VQFN package. Its picoPower AVR implementation operates across 1.8 V to 5.5 V. Power consumption must be evaluated across active, idle, sleep, and wake-up modes using the manufacturer's current-consumption characteristics.
What peripherals are integrated into ATTINY48-MMH?
The ATTINY48-MMH integrates a 10-bit ADC, SPI, debugWIRE, an 8-bit timer/counter, and a 16-bit timer/counter with PWM. It also provides 4 KB of in-system programmable Flash, 64 bytes of EEPROM, and 256 bytes of SRAM. According to the Microchip ATtiny48 product page, these resources support compact embedded-control designs without requiring separate ADC, communication, or timer devices.
How much memory does ATTINY48-MMH have?
The ATTINY48-MMH has 4 KB of in-system programmable Flash organized as 2K by 16, 64 bytes of EEPROM, and 256 bytes of SRAM. The Microchip product page identifies these capacities directly. The relatively small SRAM should be considered when buffering serial data, maintaining display information, or using libraries with substantial working memory requirements.
Where can I buy ATTINY48-MMH and what is its lead time?
Use the Request a Quote form on this page to request ATTINY48-MMH pricing, current stock, minimum order quantity, and production lead time. XAIPART confirms the exact ordering code and package before a quotation is prepared. The listing pages indicate component availability information, but current quantities and delivery schedules should be checked through the quote process rather than inferred from a static listing.
What is the price of ATTINY48-MMH?
The current ATTINY48-MMH price is obtained through the Request a Quote form on this page. The form allows buyers to request the quantity break structure for the exact ATTINY48-MMH ordering code rather than a family-level price. Pricing can vary with order quantity, date code, packaging, and current component supply, so a quotation is the appropriate source for an actionable price.
Is ATTINY48-MMH in stock?
Current ATTINY48-MMH inventory status should be confirmed with XAIPART through the Request a Quote form on this page. Enter the required quantity and any date-code or packaging requirements so the procurement team can check the exact 28-pin VQFN ordering code. A distributor result indicating that the component can be ordered does not by itself establish the quantity currently available for a specific production order.
Is ATTINY48-MMH RoHS compliant and automotive qualified?
The RoHS, REACH, AEC-Q100, lead-free, and halogen-free status of ATTINY48-MMH are not established by the current manufacturer page information. Treat these compliance attributes as unknown until the relevant Microchip declaration or package documentation is located. The standard ATtiny48 ordering code should not be assumed to be AEC-Q100 qualified merely because the related ATtiny88 device is discussed in the same market.

داتای سەرچاوەی ئەندازیاری بۆ ATTINY48-MMH — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the ATTINY48-MMH when a compact control design needs an AVR microcontroller with 4 KB of Flash, 64 bytes of EEPROM, 256 bytes of SRAM, a 10-bit ADC, SPI, PWM-capable timers, and operation from 1.8 V to 5.5 V. Its 28-pin VQFN package is appropriate for space-constrained boards, although the exposed pad and fine-pitch footprint require careful PCB layout. ATTINY88-MMH may be attractive when the larger ATtiny family member provides more memory, but its pin functions, electrical limits, and firmware requirements must be reviewed before substitution. No confirmed cross-brand drop-in replacement is established, so changing manufacturers is a redesign unless a qualified candidate is found with the same 28-pin footprint and compatible peripherals.

تێبینییەکانی دیزاین

Use the manufacturer package drawing for the 28-pin VQFN land pattern, including the exposed thermal pad and its solder-requirements note. Place the required bypass capacitors close to their associated supply pins and provide an unobstructed thermal path through the exposed pad. A 4 mm by 4 mm footprint gives little room for routing errors, so verify pad dimensions, paste apertures, and assembly tolerances before fabrication.

Keep analog inputs associated with the 10-bit ADC away from switching nodes, motor traces, and fast digital edges. Connect the exposed thermal pad to the recommended ground construction using the manufacturer's guidance, and return serial SPI and debug signals through a quiet area. If the board contains a wireless module or power converter, establish its switching region separately from the analog front end to reduce conversion error and radiated coupling.

The ATtiny48 operates from 1.8 V to 5.5 V, so validate the final supply range and clock limit against the manufacturer datasheet rather than assuming every 12 MHz operating point applies at the lowest voltage. Place local decoupling at the supply pins, control ground-return paths, and measure startup behavior in the assembled board. For battery systems, calculate average demand from active and sleep current rather than judging consumption from the maximum clock frequency alone.

Do not treat ATTINY48-MMH as interchangeable with every 28-pin ATtiny controller merely because the package dimensions match. Firmware written for a device with more Flash, EEPROM, SRAM, timers, or ADC channels may fail when transferred unchanged, and renamed peripheral pins can alter interrupt or PWM behavior. Program and validate each candidate with its own manufacturer pin table, memory map, and peripheral documentation before approving a substitution.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

Compliance declarations are not stated on the Microchip product page excerpt and must be confirmed from the manufacturer declarations or package documentation.

داتا پشتڕاستکراوەتەوە لە: 2026-11-06 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

attiny48 datasheet attiny48 pinout attiny48 pdf ATTINY48-MMH datasheet ATTINY48-MMH pinout ATTINY48-MMH specifications ATTINY48-MMH application circuit ATTINY48-MMH equivalent ATTINY48-MMH replacement ATTINY48-MMH cross reference ATTINY48-MMH vs ATTINY88-MMH ATTINY48-MMH footprint ATTINY48-MMH price ATTINY48-MMH stock Microchip ATTINY48-MMH

پێکهاتە و زاراوە پەیوەندیدارەکان

Microchip Technology ATTINY48-MMH ATTINY48 ATTINY88-MMH AVR 8-bit microcontroller RISC architecture picoPower ISP Flash EEPROM SRAM 10-bit ADC SPI debugWIRE 16-bit PWM timer/counter 28-pin VQFN 4 mm x 4 mm VQFN QFN package family surface-mount technology SMD JEDEC RoHS REACH embedded control sensor node
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ