Microchip Technology

ATTINY824-XF - 20MHz 8KB AVR Microcontroller | Microchip

MPN: ATTINY824-XF ✓ چالاک
14-pin TSSOP Package 20 MHz Speed 8 KB Memory
MOQ: 1 |

ATTINY824-XF گشتی

The Microchip Technology ATTINY824-XF is an 8-bit tinyAVR 2 series microcontroller with an AVR CPU and hardware multiplier, operating at up to 20 MHz. It provides 8 KB of in-system programmable Flash, 1 KB of SRAM, and 128 bytes of EEPROM in a 14-pin TSSOP package rated for industrial temperatures up to 125°C.

A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripheral functions into one device. The ATTINY824-XF belongs to the tinyAVR 2 hierarchy, combining a compact 8-bit AVR core with Core Independent Peripherals. This family is intended for cost-sensitive embedded control, smart sensors, compact actuator controllers, and connected products that need more processing capability than a basic logic device without the complexity of a larger microcontroller.

Key device characteristics include a maximum clock frequency of 20 MHz, a hardware multiplier for faster arithmetic, 8 KB of Flash program memory, 1 KB of internal SRAM, and 128 bytes of nonvolatile EEPROM. The 14-pin TSSOP package provides a practical surface-mount footprint, while the industrial temperature rating supports operation from the lower-temperature industrial range through 125°C. The device is also identified as a Green environmental-compliant part in the product listing.

The AVR architecture executes 16-bit and 32-bit instructions from Flash memory organized into 4 KB pages. The hardware multiplier accelerates multiplication operations in control loops, measurement routines, and compact signal-processing tasks. Internal SRAM supports working variables and stack operations, while EEPROM provides nonvolatile storage for calibration values, configuration data, and operating counters without requiring an external memory component.

Typical applications include industrial sensor nodes, compact motor and actuator controllers, LED lighting systems, compact power-conversion controllers, appliance interfaces, and embedded IoT nodes. The combination of 20 MHz processing speed and only 14 pins supports designs that need deterministic real-time behavior in a small, inexpensive board area.

The primary design consideration is that the 14-pin package limits the available I/O count, so pin multiplexing should be planned before the PCB layout begins. Place decoupling capacitors close to the supply pins and route high-current loads away from sensitive analog inputs. Firmware should also use the manufacturer data sheet for register definitions, clock configuration, peripheral multiplexing, and programming procedures.

This page consolidates device specifications, drop-in alternatives, application guidance, and practical PCB considerations into one engineering-focused reference for evaluating the ATTINY824-XF in new embedded designs.

جێگرەوەکانی جێگۆڕکێ بۆ ATTINY824-XF — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ATTINY824-XF (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Product Type, CPU Architecture, Flash Memory, Package, SRAM.

Microchip Technology
Product Type: 8-bit AVR microcontroller
CPU Architecture: AVR with hardware multiplier
Flash Memory: 4 KB
بەراوردکردن لەگەڵ ATTINY824-XF →
Microchip Technology
Product Type: 8-bit AVR RISC microcontroller
CPU Architecture: AVR with hardware multiplier
Flash Memory: 4 KB
بەراوردکردن لەگەڵ ATTINY824-XF →

ATTINY826-XFR

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 14-pin TSSOP
Same 20 MHz AVR class and 8 KB Flash tier, but timer and peripheral resource assignments differ by 0 MHz in clock speed and 0 KB in Flash capacity

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

ATTINY827-XFR

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 14-pin TSSOP
Same 20 MHz clock and 8 KB Flash tier as the ATTINY824-XF, with a different timer and peripheral configuration and 0% clock difference

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

ATTINY1624-XFR

✅ جێگرەوەی ڕاستەوخۆ
📦 14-pin TSSOP
Matches the 20 MHz operating class and 14-pin TSSOP format, but Flash increases from 8 KB to 16 KB by 100% and the peripheral map changes

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

ATTINY824-XF زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type 8-bit Microcontroller
Series tinyAVR 2
CPU Architecture AVR
Core Size 8 bit
زۆرترین فرێکوێنسیی کاتژمێر 20 MHz
Hardware Multiplier Yes
Flash Memory 8 KB
Flash Organization 4 KB x 16-bit pages
SRAM 1 KB
EEPROM 128 bytes
Program Memory Type In-system programmable Flash
پاکێج 14-pin TSSOP
جۆری دامەزراندن Surface Mount
پلەی گەرمیی کارکردن Up to 125°C
Environmental Status Green
Peripheral Architecture Core Independent Peripherals

ڕێنمایی ڕێکخستنی پینی ATTINY824-XF 14-pin tssop

ڕێکخستنی پین بۆ ATTINY824-XF (پاکێجی 14-pin tssop). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 14-pin tssop بۆ ATTINY824-XF

هیچ داتای وردی پینئاوت بەردەست نییە بۆ ATTINY824-XF.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

ATTINY824-XF گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor Node, Compact Motor and Actuator Controller, LED Lighting Controller, Smart Appliance Interface, Embedded IoT Sensor Endpoint, Compact Power-Supply Auxiliary Controller.

🏭

Industrial Sensor Node

The ATTINY824-XF fits compact industrial sensor nodes that must acquire readings, apply calibration, and report results over a serial link. Its 20 MHz AVR core with a hardware multiplier provides enough processing throughput for filtering and unit conversion, while 1 KB of SRAM accommodates working buffers and the stack. Eight kilobytes of Flash can hold the measurement routine, protocol handling, and configuration logic. Use the 128-byte EEPROM for calibration constants and a serial device identifier. The principal constraint is the 14-pin package, so allocate pins for the sensor interface and communications before finalizing the board.

⚡

Compact Motor and Actuator Controller

The ATTINY824-XF is suitable for small motor, valve, and actuator controllers where deterministic control-loop timing matters more than a large memory map. At up to 20 MHz with a hardware multiplier, the AVR core can execute proportional control calculations and update multiple outputs within a short control interval. The 8 KB Flash supports a compact state machine and tuning logic, while 1 KB of SRAM provides room for counters and control variables. Because the TSSOP-14 footprint limits dedicated outputs, use PWM-capable pins for actuators and validate the available timer channels against the required duty-cycle resolution.

💡

LED Lighting Controller

The ATTINY824-XF can drive intelligent LED lighting modules that require dimming, effects, and local control. Its 20 MHz processing speed supports PWM updates, button handling, and communication protocol tasks, while the hardware multiplier assists in color-mixing calculations for RGB or multi-channel fixtures. Eight kilobytes of Flash is sufficient for compact lighting tables and a short effect engine, and the 1 KB SRAM can buffer frame or transition data. Place output drivers away from the controller and isolate high-current LED paths to reduce switching noise and ground bounce on the compact TSSOP board.

🔧

Smart Appliance Interface

The ATTINY824-XF works well as the secondary control processor in a smart appliance, handling buttons, indicators, and a local bus while a higher-level processor manages connectivity. Its 20 MHz AVR core can service multiple interrupts and protocol states, and the hardware multiplier improves response-time calculations in motor or thermal-control routines. The 8 KB Flash tier is appropriate for a focused peripheral task rather than a large application framework. Use the 128-byte EEPROM for calibration or configuration retention, and make sure the firmware supports a safe recovery path if the serial link or main controller restarts.

🧩

Embedded IoT Sensor Endpoint

The ATTINY824-XF is appropriate for small IoT endpoints that perform local sensing, threshold decisions, and brief data processing before transmission. Its 8 KB of Flash can hold a lightweight protocol stack and application logic, while 1 KB of SRAM supports packet assembly and sensor buffering. The 20 MHz clock reduces latency between sampling and packet preparation, and EEPROM can store node calibration or a persistent identity. For designs requiring radio coexistence, keep the communications module physically separated and follow the radio module's recommended grounding and filtering layout rather than routing antenna currents near the controller.

🔋

Compact Power-Supply Auxiliary Controller

The ATTINY824-XF can serve as an auxiliary controller in power systems where the main converter handles regulation and the microcontroller manages sequencing, fault flags, or telemetry. Its 20 MHz AVR core supports fast state-machine updates, while 1 KB of SRAM is sufficient for counters and protection logic. The 8 KB Flash capacity accommodates a compact supervisory program without requiring a large embedded operating system. Isolation, voltage levels, and fault-response timing must be reviewed against the power-stage design, and the TSSOP-14 package should be placed away from high-voltage switching nodes and thermal hotspots.

What is the ATTINY824-XF and what are its main specifications?
The ATTINY824-XF is an 8-bit Microchip tinyAVR 2 microcontroller rated for up to 20 MHz operation. According to the Microchip ATtiny424/426/427/824/826/827 data sheet DS40002311A, it includes 8 KB of Flash, 1 KB of SRAM, 128 bytes of EEPROM, an AVR CPU with a hardware multiplier, and Core Independent Peripherals in a 14-pin TSSOP package. The -XF ordering code identifies the industrial-temperature, 14-pin TSSOP configuration.
How much Flash and SRAM does the ATTINY824-XF have?
The ATTINY824-XF provides 8 KB of in-system programmable Flash and 1 KB of SRAM, plus 128 bytes of EEPROM. The Microchip data sheet DS40002311A explains that Flash is arranged in 4 KB pages of 16-bit words because AVR instructions can be 16 or 32 bits wide. The SRAM holds working data and the stack, while EEPROM retains calibration or configuration values when the device loses power.
What is the maximum operating frequency of the ATTINY824-XF?
The maximum operating frequency of the ATTINY824-XF is 20 MHz. The Microchip product page identifies the AVR CPU as running at up to 20 MHz, and the family data sheet DS40002311A describes the clock and timing architecture. The hardware multiplier accelerates multiplication operations, making the device suitable for compact control loops, signal conditioning, and real-time embedded tasks that benefit from faster arithmetic.
Where can I download the ATTINY824-XF datasheet PDF?
The official ATTINY824-XF datasheet PDF is available from Microchip Technology through the ATtiny424/426/427/824/826/827 Data Sheet DS40002311A. It covers electrical characteristics, memory organization, clock systems, Core Independent Peripherals, pin definitions, and package information. Use the manufacturer document for programming guidance and verify the ordering-code suffix before adopting a schematic or footprint.
Where can I find the ATTINY824-XF pinout and package details?
The ATTINY824-XF uses a 14-pin TSSOP package, and its complete pin-definition table is contained in the Microchip family data sheet DS40002311A. The pinout includes the device supply pins and the multiplexed port pins. Because several peripheral functions can share the same physical pins, use the pin-description table in the data sheet when assigning external circuits rather than relying on generic TSSOP diagrams.
Can the ATTINY824-XF be replaced by the ATTINY826-XFR?
The ATTINY826-XFR is the closest same-family alternative for designs that can accommodate a different timer and peripheral configuration. It remains a 20 MHz, 8-bit AVR device in a 14-pin TSSOP package, but its internal peripheral resources differ from the ATTINY824-XF. Treat it as a design-review candidate rather than an automatic substitution, and confirm every signal assignment against the data sheet before releasing production artwork.
What is the difference between ATTINY824-XF and ATTINY1624-XFR?
The ATTINY1624-XFR uses 16 KB of Flash, twice the 8 KB available in the ATTINY824-XF, while both devices are listed as 20 MHz, 8-bit AVR microcontrollers in 14-pin TSSOP packages. The larger memory and different peripheral organization can change software and pin assignments. Verify the package, pin mapping, clock behavior, and interrupt requirements before treating the ATTINY1624-XFR as a replacement.
When should I choose the ATTINY824-XF over the ATTINY827-XFR?
Choose the ATTINY824-XF when its timer and peripheral configuration matches the control task without paying for resources that will remain unused. The ATTINY827-XFR belongs to the same 20 MHz, 8 KB tinyAVR 2 family and uses the same 14-pin TSSOP format, but it provides a different peripheral arrangement. Select between them by mapping required functions to physical pins rather than by processor speed alone.
Is the ATTINY824-XF suitable for industrial sensor nodes?
Yes, the ATTINY824-XF is suitable for compact industrial sensor nodes that require deterministic 8-bit control and local data processing. Its 20 MHz AVR core, 8 KB of Flash, 1 KB of SRAM, 128 bytes of EEPROM, and operation up to 125°C support embedded sensing and actuator tasks. The limited 14-pin footprint requires careful allocation of analog, serial, and digital functions.
What can replace the ATTINY824-XF in an existing PCB design?
The ATTINY824-XF can be approached with the ATTINY826-XFR, ATTINY827-XFR, and ATTINY1624-XFR, but each requires a firmware and pin-function review. The alternatives share the 14-pin TSSOP format and 20 MHz class of operation, yet their timer resources, Flash capacities, and peripheral mappings are not identical. Validate the replacement with the manufacturer data sheet and application firmware before committing to a hardware change.
What is the best Microchip equivalent for the ATTINY824-XF?
The best Microchip equivalent depends on which functions the design actually uses. ATTINY826-XFR is the nearest same-family candidate for a 14-pin, 20 MHz, 8 KB design, while ATTINY1624-XFR offers 16 KB of Flash. Neither should be treated as an automatic one-to-one substitution because timer resources and pin multiplexing can differ. Compare the required peripheral functions and pin map before selecting a replacement.
Does the ATTINY824-XF have a hardware multiplier?
Yes, the ATTINY824-XF includes an AVR CPU with a hardware multiplier. Microchip identifies this feature on the ATtiny824 product page, which helps accelerate multiplication in control algorithms, filtering, and measurement code. The multiplier reduces execution time compared with a multiplication implemented as a software loop, although the 1 KB SRAM remains the primary limit for complex buffering.
Where can I buy the ATTINY824-XF and check current availability?
Use the Request a Quote form on this page to request the current ATTINY824-XF price, stock position, and lead time. The part is identified as a Microchip Technology 14-pin TSSOP microcontroller with industrial-temperature capability. A sourcing review should confirm the exact -XF ordering code, factory packaging requirements, and current lifecycle status before a purchase order is released.
How much does the ATTINY824-XF cost and is it in stock?
Current unit pricing and stock quantity for the ATTINY824-XF are available through the Request a Quote form on this page. Commercial terms can change with order volume, packaging configuration, and market conditions, so request a current quotation rather than relying on an older catalog value. Include the required quantity, delivery target, and acceptable packing format in the request.
What is the lead time for the ATTINY824-XF?
Request the current production and delivery lead time through the Request a Quote form on this page. Lead time depends on factory inventory, packaging, and the order quantity, and it should be confirmed against current Microchip supply conditions. For safety-critical or scheduled production builds, request written availability and delivery information before committing the build date.
How do I decide between a 20 MHz AVR controller and a faster alternative MCU?
Choose the ATTINY824-XF when the application fits 8 KB of Flash, 1 KB of SRAM, and the peripheral resources of a 14-pin device. Its 20 MHz AVR core and hardware multiplier provide ample capacity for control, measurement, and serial tasks at low system complexity. Move to a larger-memory or faster controller only when software growth, interrupt density, or peripheral requirements exceed the ATTINY824-XF limits.

داتای سەرچاوەی ئەندازیاری بۆ ATTINY824-XF — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the ATTINY824-XF for compact embedded control tasks that fit 8 KB of Flash, 1 KB of SRAM, and a 14-pin TSSOP footprint. Its 20 MHz AVR core, hardware multiplier, and Core Independent Peripherals make it a practical choice for sensor nodes, actuator controllers, lighting modules, and auxiliary appliance processors. Choose the ATTINY826-XFR when its timer and peripheral arrangement better matches the required functions, but review the pin map before treating it as a replacement. The ATTINY827-XFR offers another same-family configuration for designs requiring a different peripheral set. Use the ATTINY1624-XFR when the application benefits from 16 KB of Flash, while accounting for its doubled memory and changed peripheral organization. For every candidate, confirm the operating voltage, programming method, peripheral resources, and package dimensions against the manufacturer documentation before releasing a production design.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە ATTINY826-XFR ATTINY827-XFR ATTINY1624-XFR
Package 14-pin TSSOP 14-pin TSSOP 14-pin TSSOP 14-pin TSSOP
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Maximum Clock Frequency 20 MHz 20 MHz 20 MHz 20 MHz
CPU Architecture 8-bit AVR 8-bit AVR 8-bit AVR 8-bit AVR
Flash Memory 8 KB 8 KB 8 KB 16 KB
Timer and Peripheral Configuration ATtiny824 family configuration ATtiny826 family configuration ATtiny827 family configuration ATtiny1624 family configuration
Operating Temperature Up to 125°C Up to 125°C Up to 125°C Up to 125°C

جیاکەرەوە سەرەکییەکان

  • Matches the core speed and memory tier of the closest tinyAVR 2 family alternatives (بەراورد بەATTINY826-XFR)
  • Provides double the Flash capacity in the same package class for firmware growth (بەراورد بەATTINY824-XF)
  • Combines a 20 MHz AVR core with a hardware multiplier in a compact 14-pin package (بەراورد بەATTINY1624-XFR)

تێبینییەکانی دیزاین

Route the ATtiny824-XF supply and ground connections carefully because the 14-pin TSSOP leaves limited space for decoupling and signal escape. Place the required bypass capacitors adjacent to the device power pins, use a short ground return, and keep analog inputs away from switching nodes and high-current driver traces. Confirm the physical pin map against Microchip data sheet DS40002311A before placing the footprint.

Complete peripheral and pin multiplexing before committing the schematic. The 14-pin package provides a small number of external signals, so a timer output, serial function, and analog input can compete for the same pins. Build a firmware-to-pin matrix, verify alternate-function behavior during reset, and reserve a debug or programming interface without adding signals that the board cannot physically route.

Do not assume that all 14-pin tinyAVR devices have the same peripheral assignments. Although the ATTINY826-XFR and ATTINY827-XFR share the package and 20 MHz operating class, their timer resources and alternate-function mappings can differ from the ATTINY824-XF. Validate register behavior, interrupt vectors, PWM channels, and serial connections in the manufacturer data sheet before approving a substitute for production hardware.

Keep the controller's supply rail separate from noisy loads such as relays, solenoids, and LED strings. A small local regulator or filtered supply can reduce conducted noise entering the AVR core, while a low-impedance bypass network limits transient voltage at the pins. Confirm the exact operating voltage range and maximum supply current from the family data sheet before defining the power tree.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The product listing identifies the ATTINY824-XF as a Green part, but detailed RoHS, REACH, halogen-free, and conflict-minerals declarations are not listed on this page. Use the Microchip product documentation and current material-declaration records for formal compliance assessment.

داتا پشتڕاستکراوەتەوە لە: 2026-11-06 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

ATTINY824-XF datasheet ATTINY824-XF specifications ATTINY824-XF pinout ATTINY824-XF price ATTINY824-XF stock ATTINY824-XF equivalent ATTINY824-XF replacement ATTINY824 vs ATTINY1624 ATTINY824 TSSOP14 pinout Microchip ATTINY824-XF ATTINY824 20MHz 8KB Flash ATTINY824 industrial sensor controller

پێکهاتە و زاراوە پەیوەندیدارەکان

Microchip Technology ATTINY824-XF ATTINY824 ATTINY826-XFR ATTINY827-XFR ATTINY1624-XFR tinyAVR 2 AVR CPU 8-bit microcontroller embedded microcontroller Core Independent Peripherals hardware multiplier Flash memory SRAM EEPROM in-system programming TSSOP-14 surface-mount package 20 MHz clock industrial temperature grade RoHS REACH sensor node motor controller LED lighting controller
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ