ATTINY826-XF - 20MHz 8KB AVR Microcontroller | Microchip
MPN: ATTINY826-XF ✓ چالاکATTINY826-XF گشتی
A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals in one integrated circuit. The tinyAVR 2 family belongs to the AVR microcontroller line, within the broader 8-bit embedded-controller and semiconductor hierarchy. The ATTINY826 adds a hardware multiplier to the AVR CPU and is designed for compact control tasks requiring modest program storage, data memory, and digital interface integration.
Key features include an AVR CPU with a hardware multiplier, operation up to 20 MHz, 8192 bytes of Flash, 1024 bytes of SRAM, and 128 bytes of EEPROM. Its 4.5 V to 5.5 V main operating range is appropriate for 5 V embedded systems, while the 2.7 V minimum operating voltage at 8 MHz extends its utility in lower-voltage designs. The 20-pin SSOP package also supports compact, surface-mount PCB construction.
The tinyAVR 2 architecture provides a hardware multiplier for efficient multiplication operations and combines deterministic embedded control with integrated on-chip memory. The ATTINY826 family is offered in 20-pin VQFN, SSOP, and SOIC configurations, giving designers several package options for different assembly methods and board-density requirements. The ATTINY826-XF specifically uses the SSOP configuration identified by its ordering code.
Typical applications include compact industrial control modules, LED lighting controllers, small sensor-hub nodes, appliance interface boards, fan and pump controllers, and low-cost embedded products. Its 8 KB Flash capacity suits firmware featuring a modest control loop, local state handling, and communication protocol support, while the 1 KB SRAM is sufficient for small working buffers.
Designers should verify the complete peripheral mix, pin multiplexing, clock configuration, and programming requirements against the manufacturer datasheet before final schematic capture. Pay particular attention to operating voltage versus clock speed, startup behavior, and decoupling. The same discipline applies when replacing another 20-pin microcontroller because package shape alone does not establish functional compatibility.
This product page combines the exact ATTINY826-XF configuration, manufacturer family information, application guidance, a complete technical comparison framework, and practical design notes. It is intended to accelerate component selection, firmware planning, PCB review, and sourcing decisions for compact embedded systems.
جێگرەوەکانی جێگۆڕکێ بۆ ATTINY826-XF — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ATTINY826-XF (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە SRAM, CPU Architecture, Package, Flash Memory, Industrial Temperature Rating.
ATTINY826-SU
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →ATTINY826-SUR
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ATTINY826-XUR
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ATTINY826-XUS
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ATTINY826-SS
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ATTINY826-XF زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| CPU Architecture | 8-bit AVR with hardware multiplier |
| Product Family | tinyAVR 2 |
| زۆرترین فرێکوێنسیی کاتژمێر | 20 MHz |
| Flash Program Memory | 8192 bytes (8 KB) |
| SRAM | 1024 bytes (1 KB) |
| EEPROM | 128 bytes |
| Main Operating Voltage Range | 4.5 V to 5.5 V |
| Low-Power Operating Voltage | 2.7 V minimum at 8 MHz |
| پاکێج | 20-pin SSOP |
| ژمارەی پین | 20 pins |
| جۆری دامەزراندن | Surface mount |
| Industrial Temperature Rating | 125 °C maximum |
| CPU Instruction Set | AVR |
| Hardware Multiplier | Present |
| پانی بسێ داتا | 8 bits |
| Program Memory Type | Flash |
| Green Design Classification | Green |
ڕێنمایی ڕێکخستنی پینی ATTINY826-XF 20-pin ssop
ڕێکخستنی پین بۆ ATTINY826-XF (پاکێجی 20-pin ssop). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ ATTINY826-XF.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
ATTINY826-XF گونجاوە بۆ 6 بەکارھێنانs: Compact Industrial Control Module, LED Lighting Controller, Small Sensor Hub Node, Appliance Interface Board, Fan and Pump Controller, Communication Interface Module.
Compact Industrial Control Module
The ATTINY826-XF fits compact control modules that execute deterministic state machines, monitor discrete inputs, and operate actuators from a 5 V rail. Its 20 MHz AVR CPU and hardware multiplier support responsive control calculations, while 8 KB of Flash provides room for application firmware and 1 KB of SRAM accommodates working variables. The 4.5 V to 5.5 V operating range matches common industrial supply conditions, and the 20-pin SSOP package reduces board footprint. Design the supply for the selected peripherals, keep clocking within the voltage-versus-frequency limits, and verify all I/O assignments against the manufacturer pin-description table.
پێشنیارکراو
LED Lighting Controller
The ATTINY826-XF is suitable for LED lighting controllers that sequence channels, implement dimming logic, and manage local operating modes. The 20 MHz processor provides ample timing headroom for software PWM or other periodic control functions, and the hardware multiplier assists with scaling and compensation calculations. Its 8 KB Flash, 1 KB SRAM, and 128 bytes of EEPROM provide a practical memory split for firmware, runtime variables, and retained settings. The 20-pin SSOP outline supports compact driver boards, while the 4.5 V to 5.5 V range fits 5 V control electronics. Confirm timer outputs, current ratings, thermal performance, and grounding in the final reference design.
پێشنیارکراو
Small Sensor Hub Node
The ATTINY826-XF can serve as the local controller in a small sensor-hub node that samples inputs, filters readings, records operating status, and forwards summarized information. Its 20 MHz AVR core supports responsive acquisition and protocol handling, while 1 KB of SRAM is appropriate for compact buffers rather than large data histories. The 128-byte EEPROM is useful for retaining calibration identifiers or configuration values, and the 8 KB Flash supports a focused embedded application. Use the 5 V operating range when interfacing with compatible sensors and regulators. Validate analog or digital sensor requirements, available I/O, communication pins, and low-power behavior because the complete peripheral details are defined in the family documentation.
پێشنیارکراو
Appliance Interface Board
The ATTINY826-XF is appropriate for appliance interface boards that translate buttons, switches, sensors, and displays into controlled internal behavior. Its compact 20-pin SSOP package assists board-space reduction, while the AVR CPU running up to 20 MHz can service multiple digital inputs and time-based tasks. The memory resources are sized for embedded control firmware, local state, and retained settings rather than a rich graphical workload. Its main 4.5 V to 5.5 V supply range aligns with common appliance electronics. During design, segregate noisy motor or heater switching from sensitive signal paths, provide suitable decoupling, and consult the pin table for alternate peripheral functions and programming-access requirements.
پێشنیارکراو
Fan and Pump Controller
The ATTINY826-XF can implement a compact fan or pump controller that manages operating states, timers, interlocks, and speed-command logic. The 20 MHz AVR core provides useful timing performance, the hardware multiplier supports duty-cycle and scaling calculations, and 1 KB of SRAM is sufficient for a focused control loop. The device operates from a 4.5 V to 5.5 V main supply range and includes Flash plus EEPROM for firmware and retained settings. Its 20-pin SSOP package is useful in space-constrained boards. Keep the MCU supply and ground paths separated from high-current switching returns, validate logic-level compatibility with the power stage, and confirm that thermal conditions at the actuator driver remain within its ratings.
پێشنیارکراو
Communication Interface Module
The ATTINY826-XF works well in a communication interface module that handles local framing, address recognition, status reporting, and configuration storage. Its 8 KB Flash can hold a focused protocol stack, the 1 KB SRAM supports short packet buffers, and the 128-byte EEPROM retains limited device settings. The hardware multiplier improves multiplication-heavy protocol calculations, while the 20 MHz clock provides useful processing margin. The 20-pin SSOP package supports compact interface boards and the 4.5 V to 5.5 V range suits 5 V transceivers with compatible logic levels. Verify UART, SPI, I2C, or other interface availability, alternate-pin functions, bus timing, and pin multiplexing before assigning connector and transceiver nets.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ ATTINY826-XF — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
تێبینییەکانی دیزاین
Keep the ATTINY826-XF within its documented operating envelope: 4.5 V to 5.5 V for the main range and no more than 8 MHz when operating down to 2.7 V. Place the supply bypass capacitor close to the device power pins and use a quiet source for the 5 V rail. Confirm the regulator can support the combined microcontroller and attached-interface load without excessive ripple.
Use the manufacturer SSOP-20 land pattern and pin-description table during PCB layout. Keep programming and communication routes away from noisy switching nodes, route the ground return continuously, and avoid long traces beneath digital interfaces where coupling could affect signal integrity. Pay particular attention to alternate peripheral functions because one physical pin may serve multiple functions.
Do not treat a related ATTINY826 order code as a replacement without checking package drawing, temperature grade, pin functions, clock limits, and programming behavior. Likewise, a 20-pin microcontroller with the same pin count is not automatically pin-compatible. Preserve reset and programming access in the production design, and validate the assembled device under the intended supply voltage, clock, and peripheral load.
زانیاری پابەندبوون
The distributor listing identifies the ATTINY826-XF as a Green device, but the specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established. AEC-Q100 is not applicable to the identified industrial-temperature ordering code.