ATTINY9-TS8R - 8-Bit 10MHz AVR MCU | Microchip Technology
MPN: ATTINY9-TS8R ✓ چالاکATTINY9-TS8R گشتی
An 8-bit microcontroller is a compact computing device that executes embedded instructions from nonvolatile program memory and interfaces with sensors, switches, indicators, and other peripherals. The ATTINY9 belongs to Microchip's ATtiny family, which combines an AVR processor core, timer functions, GPIO resources, and internal oscillators in a small surface-mount package. Its 16 general-purpose working registers support efficient single-cycle instruction execution.
The ATTINY9-TS8R provides 1 KB of program memory organized as 512 words by 16 bits, 32 bytes of SRAM, and four I/O pins. Its 16-bit timer/counter includes two PWM channels, while its internal oscillator eliminates the need for an external clock in suitable designs. The device also supports power-on reset and watchdog-related functionality described for the ATtiny9 family.
The device combines an 8-bit AVR core with only 1 KB of Flash, making code size the principal design constraint. Its 32-byte SRAM is sufficient for compact state machines, simple control loops, and low-data-volume serial or GPIO tasks, but it is not intended for large buffers or complex host-side connectivity. The 10 MHz operating speed balances responsiveness against clock power and execution time.
Typical uses include compact household appliances, simple sensor interfaces, lighting controls, push-button products, low-power timers, and auxiliary controllers. In each case, the ATTINY9 is appropriate when the firmware can fit within 1 KB and the design needs only a small number of digital control points rather than a high-pin-count MCU or application processor.
Designers should verify the exact pin assignments, oscillator options, fuse settings, and programming interface against the Microchip ATtiny9 documentation before layout. Decoupling, programming-test access, reset behavior, and exposed-pad-free SOT-23-6 assembly also need to be addressed. The very small package can complicate hand rework and automated optical inspection during prototype builds.
This product page consolidates verified manufacturer and distributor information, package details, sourcing links, practical design guidance, and same-package alternatives. The comparison and selection notes distinguish confirmed drop-in candidates from parts that may require firmware or hardware changes, helping engineers choose a replacement without relying on package name alone.
جێگرەوەکانی جێگۆڕکێ بۆ ATTINY9-TS8R — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ATTINY9-TS8R (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Timer/Counter, Package, Product Type, Program Memory, Program Memory Size.
ATTINY9-TSHR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ATTINY10-TS8R
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ATTINY5-TSHR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ATTINY4-TSHR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ATTINY9-TS8R زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 8-bit AVR RISC microcontroller |
| Program Memory Size | 1 KB (512 x 16 bits) |
| SRAM Size | 32 bytes |
| General-Purpose I/O Lines | 4 |
| General-Purpose Working Registers | 16 |
| Maximum Clock Speed | 10 MHz |
| Timer/Counter | 16-bit timer/counter |
| PWM Channels | 2 |
| ڤۆڵتاژی دابینکردنی کارکردن | 2.5 V to 5.5 V |
| Oscillator Type | Internal |
| Processor Core | AVR |
| Core Width | 8-bit |
| Program Memory Type | ISP Flash |
| پاکێج | SOT-23-6 |
| ژمارەی پینەکان | 6 |
| جۆری دامەزراندن | Surface Mount |
| Packaging | Tape & Reel |
ڕێنمایی ڕێکخستنی پینی ATTINY9-TS8R sot-23-6
ڕێکخستنی پین بۆ ATTINY9-TS8R (پاکێجی sot-23-6). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ ATTINY9-TS8R.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
ATTINY9-TS8R گونجاوە بۆ 6 بەکارھێنانs: Compact push-button control, LED lighting control, Low-power timer module, Simple sensor interface, Compact appliance controller, Small motor or fan sequencer.
Compact push-button control
The ATTINY9-TS8R fits simple push-button products because it provides four general-purpose I/O lines, 32 bytes of SRAM, and a 16-bit timer/counter with two PWM channels in a 6-pin SOT-23 package. A firmware state machine can debounce one or more inputs, control indicators, and time an output without a larger microcontroller. Its 10 MHz maximum clock supports responsive event handling while limiting the memory footprint to 1 KB of Flash. The primary design check is code size: button mapping, debounce logic, and output timing must remain within the available program memory.
پێشنیارکراو
LED lighting control
The ATTINY9-TS8R is suitable for basic LED lighting because its 16-bit timer/counter includes two PWM channels for brightness or indication effects. It can operate from 2.5 V to 5.5 V and use an internal oscillator, reducing the number of external support components in a compact product. The four I/O lines are adequate for a small button interface, status LEDs, and a basic drive signal. Firmware must keep pulse-width and timing routines within the 1 KB Flash limit, while an LED or MOSFET driver must handle current that exceeds the MCU output rating.
پێشنیارکراو
Low-power timer module
The ATTINY9-TS8R works well in a small timer module because its 16-bit timer/counter supports timing functions while 32 bytes of SRAM accommodates lightweight state variables. The internal oscillator removes a discrete crystal in designs that do not require precise external time references, and the 2.5 V to 5.5 V range supports both low-voltage and 5 V products. For low-power operation, the final current budget depends on clock selection, active versus sleep behavior, and peripheral settings, which must be confirmed from the manufacturer documentation rather than inferred from the distributor summary.
پێشنیارکراو
Simple sensor interface
The ATTINY9-TS8R can supervise a simple digital sensor or switch in a space-constrained appliance. Its four I/O lines can support discrete sensor inputs and control outputs, while the AVR core executes instructions from 1 KB of ISP Flash and uses 32 bytes of SRAM for counters and state flags. The 10 MHz speed is sufficient for simple polling and threshold logic. It is best suited to digital rather than analog-intensive sensing; the 1 KB code limit can become restrictive once filtering, communication framing, and fault handling are included.
پێشنیارکراو
Compact appliance controller
The ATTINY9-TS8R is appropriate as an auxiliary controller in compact household appliances where a full application processor would be excessive. Its 16 working registers, four I/O lines, and two PWM channels can coordinate switches, indicators, and simple actuator sequencing, while 1 KB of Flash constrains the design to a focused control function. The SOT-23-6 footprint saves board area but requires careful PCB layout and automated assembly planning. Firmware should include essential fault handling within the 1 KB limit and be validated for behavior across the full 2.5 V to 5.5 V supply range.
پێشنیارکراو
Small motor or fan sequencer
The ATTINY9-TS8R can implement a basic sequencer for a small fan, pump, or stepper-related control stage. Two PWM outputs from its 16-bit timer/counter can shape low-rate drive or speed commands, while four GPIO lines handle mode selection and status. The 10 MHz AVR core provides enough execution speed for uncomplicated sequencing, and the small SOT-23-6 package simplifies board-space-constrained layouts. The MCU should command a suitable driver rather than power a motor directly, and timing behavior must be checked across voltage and temperature conditions.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ ATTINY9-TS8R — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | ATTINY9-TSHR | ATTINY10-TS8R | ATTINY5-TSHR | ATTINY4-TSHR |
|---|---|---|---|---|---|
| Package | SOT-23-6 | SOT-23-6 | SOT-23-6 | SOT-23-6 | SOT-23-6 |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Processor Core | 8-bit AVR | 8-bit AVR | 8-bit AVR | 8-bit AVR | 8-bit AVR |
| Packaging | Tape & Reel | Tape & Reel | Tape & Reel | Tape & Reel | Tape & Reel |
جیاکەرەوە سەرەکییەکان
- Balanced code and working memory for a six-pin controller (بەراورد بەATTINY4-TSHR)
- Direct same-family package alternative (بەراورد بەATTINY9-TSHR)
- More code capacity than the smaller-memory same-package options (بەراورد بەATTINY5-TSHR)
تێبینییەکانی دیزاین
Confirm the official SOT-23-6 land pattern and pin numbering before routing because the supplied distributor records identify the package but do not expose individual signal assignments. Keep the programming interface and power input accessible for inspection, place the decoupling capacitor close to the supply and ground pins, and reserve a test point for reset or clock verification. The 6-pin footprint leaves little routing freedom, so PCB design should start from the manufacturer package drawing rather than a generic SOT-23 footprint.
Plan the power budget for the complete 2.5 V to 5.5 V operating range. The exact ATTINY9 active and sleep currents were not present in the verified data, so use the manufacturer datasheet for operating-mode current before making battery-life claims. Select a regulator with adequate margin for the MCU, I/O loads, and any attached sensor, and verify that external pull-ups or LED circuits do not create continuous loads that defeat the intended low-power behavior.
Do not assume that another SOT-23-6 ATtiny is software-compatible merely because the footprints match. The verified ATTINY9-TSHR candidate is the closest family option, while ATTINY4-TSHR and ATTINY5-TSHR have lower code capacity and ATTINY10-TS8R has a different memory configuration. Check Flash size, SRAM requirements, timer channels, interrupt vectors, fuse bytes, reset behavior, and peripheral registers during substitution, then rebuild and validate the firmware for the selected device.
زانیاری پابەندبوون
The verified distributor and manufacturer summaries did not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements. No compliance claim has been inferred.