ATXMEGA16D4-MHK - 32MHz 16KB Flash AVR MCU | Microchip
MPN: ATXMEGA16D4-MHK ✓ چالاکATXMEGA16D4-MHK گشتی
An 8/16-bit AVR XMEGA microcontroller is a mixed-width embedded processor within the broader microcontroller and semiconductor hierarchy. The AVR enhanced RISC architecture combines an 8-bit instruction set with a 16-bit register file, while the XMEGA family adds a four-channel event system and a flexible interrupt structure for coordinating timers, communication interfaces, and other peripherals without excessive polling.
The ATXMEGA16D4-MHK provides 16 KB of flash organized as 8K x 16 words, including a 4 KB boot-code section with read-while-write operation. It also includes 1 KB of EEPROM for nonvolatile parameter storage and 2 KB of SRAM for working data. Its 32 MHz maximum operating frequency supports responsive control and communication tasks while the low-power design remains appropriate for embedded industrial, consumer, and communications equipment.
The integrated four-channel event system can connect peripherals through event signals, reducing CPU intervention in repetitive timing and sequencing tasks. The programmable multilevel interrupt controller supports prioritized event handling, which is useful when the system must respond promptly to sensor, timer, or communication events. The exposed pad beneath the 44-VQFN package provides a thermal path to the PCB copper and must be connected according to the manufacturer layout guidance.
Typical uses include industrial sensor controllers, compact motor-control modules, low-cost communication nodes, instrument controls, and battery-operated embedded products. Its combination of 32 MHz processing, flash, EEPROM, SRAM, and event-driven peripherals allows a designer to consolidate functions that would otherwise require a larger processor and additional support devices.
PCB implementation should prioritize short return paths around the supply and ground pins, adequate copper beneath the exposed pad, and clean routing of high-speed or sensitive interface signals. Firmware replacement requires a compatible AVR programming tool and should follow the complete ATxmega16D4 pin and programming guidance rather than relying only on a distributor summary.
This page consolidates the exact memory, frequency, package, and sourcing details for ATXMEGA16D4-MHK with same-package XMEGA alternatives, engineering-oriented comparison data, and practical PCB and replacement guidance.
جێگرەوەکانی جێگۆڕکێ بۆ ATXMEGA16D4-MHK — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ATXMEGA16D4-MHK (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Flash Memory, Package, Event System Channels, SRAM, EEPROM.
ATXMEGA16C4-MHR
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →ATXMEGA16A4-MHR
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ATXMEGA32A4-MHR
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →ATXMEGA32D3-MHR
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →ATXMEGA32A4-MHR
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →ATXMEGA16D4-MHK زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | 8/16-bit AVR XMEGA microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 16 KB (8K x 16) |
| Boot Code Section | 4 KB |
| Read-While-Write Flash | Supported |
| EEPROM | 1 KB |
| SRAM | 2 KB |
| Event System Channels | 4 channels |
| Interrupt Controller | Programmable multilevel |
| پاکێج | 44-VQFN (7 x 7 mm) exposed pad |
| جۆری دامەزراندن | Surface mount |
| Core Architecture | AVR enhanced RISC |
| Program Memory Type | ISP flash |
ڕێنمایی ڕێکخستنی پینی ATXMEGA16D4-MHK 44-vqfn (7 x 7 mm) exposed pad
ڕێکخستنی پین بۆ ATXMEGA16D4-MHK (پاکێجی 44-vqfn (7 x 7 mm) exposed pad). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ ATXMEGA16D4-MHK.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
ATXMEGA16D4-MHK گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor Controller, Low-Power Communications Node, Compact Motor Control Module, Battery-Powered Data Logger, Precision Instrument Control, Human-Machine Interface Controller.
Industrial Sensor Controller
The ATXMEGA16D4-MHK fits compact industrial sensor modules that must combine acquisition control, local configuration, and communication handling. Its 32 MHz AVR core provides sufficient execution headroom for protocol processing, while 16 KB of flash stores application and boot code. The four-channel event system can coordinate timer events, external inputs, and peripheral actions without continuous polling, and the 2 KB SRAM supports transient measurement and packet buffers. The 44-VQFN footprint also helps limit board area in space-constrained instrumentation. Design the exposed pad into the ground and power planes, and verify the peripheral allocation before assigning ADC, timer, and communication functions.
پێشنیارکراو
Low-Power Communications Node
The ATXMEGA16D4-MHK is appropriate for low-power communications nodes that periodically wake, exchange data, and return to a reduced-energy state. Its low-power AVR XMEGA architecture operates from 1.8 V, 2.5 V, or 3.3 V rails, allowing direct compatibility with common low-energy system voltages. The 16 KB flash holds protocol and application routines, 1 KB EEPROM preserves configuration values, and the programmable multilevel interrupt controller supports prioritized handling of communication and timing events. Validate wake-up timing, peripheral clock gates, and sleep-current measurements on the assembled board because external radios and level shifters can dominate the final power budget.
پێشنیارکراو
Compact Motor Control Module
The ATXMEGA16D4-MHK can serve as the control core for a compact stepper, brushless, or mixed-signal motor-control module. Its 32 MHz processing supports timed control loops, while the four-channel event system can route timer and comparator events among peripherals. That event-driven architecture helps reduce the CPU burden when multiple timing relationships must be maintained. The 16 KB flash capacity is adequate for compact control firmware, and the 44-VQFN exposed-pad package preserves board area. The MCU does not directly replace a motor driver, so gate-drive signals, protection, current sensing, and fault handling must be designed separately and checked against the selected power stage.
پێشنیارکراو
Battery-Powered Data Logger
The ATXMEGA16D4-MHK fits a battery-powered data logger that records sensor values and configuration parameters between intermittent operating periods. Its 1 KB EEPROM can retain calibration or operating data without consuming flash space, while 16 KB of flash provides room for acquisition routines, data formatting, and a bootloader. The four-channel event system can coordinate sampling timers and external triggers, helping keep the 32 MHz processor idle between events. For a successful low-power design, use the device's low-power modes, disable unused peripherals, and account for leakage from sensors, memory, pull networks, and indicator circuits during a complete energy budget.
پێشنیارکراو
Precision Instrument Control
The ATXMEGA16D4-MHK is suitable for compact measurement and instrument-control products that need deterministic timing and local signal conditioning. Its 32 MHz core can execute calibration, filtering, and user-interface update routines, while the programmable multilevel interrupt controller allows time-critical measurements to take priority over background work. The event system offers four channels for linking timer, comparator, and communication events. The 44-VQFN package supports dense instrumentation designs, although its exposed pad requires careful thermal and layout planning. Before finalizing analog performance, verify the device's ADC characteristics, reference options, input topology, and pin assignments against the application requirements.
پێشنیارکراو
Human-Machine Interface Controller
The ATXMEGA16D4-MHK can manage a compact human-machine interface consisting of buttons, indicator outputs, and a serial display or communications link. Its 16 KB flash accommodates interface state machines and menu logic, while 2 KB of SRAM provides working space for display buffers and event queues. The four-channel event system can coordinate debounced input timing with periodic display or communication activity, and the multilevel interrupt controller supports deterministic prioritization. The small 44-VQFN package helps reduce controller-board area. Keep display interfaces and noisy switching nodes separated, confirm logic-level compatibility, and provide stable local decoupling near the device supply pins.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ ATXMEGA16D4-MHK — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | ATXMEGA16C4-MHR | ATXMEGA16A4-MHR | ATXMEGA32A4-MHR | ATXMEGA32D3-MHR |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-VQFN (7 x 7 mm) exposed pad | 44-VQFN (7 x 7 mm) exposed pad | 44-VQFN (7 x 7 mm) exposed pad | 44-VQFN (7 x 7 mm) exposed pad | 44-VQFN (7 x 7 mm) exposed pad |
| Flash Memory | 16 KB | 16 KB | 16 KB | 32 KB | 32 KB |
| Architecture | AVR enhanced RISC 8/16-bit | AVR enhanced RISC 8/16-bit | AVR enhanced RISC 8/16-bit | AVR enhanced RISC 8/16-bit | AVR enhanced RISC 8/16-bit |
جیاکەرەوە سەرەکییەکان
- Four-channel event system with programmable multilevel interrupt handling (بەراورد بەATXMEGA32D3-MHR)
- Direct ISP flash support with a 4 KB boot-code section (بەراورد بەATXMEGA16C4-MHR)
- Memory footprint matches the 16 KB XMEGA class without moving to a 32 KB device (بەراورد بەATXMEGA32A4-MHR)
تێبینییەکانی دیزاین
Route the ATXMEGA16D4-MHK supply connections directly to the device's specified supply and ground pins, and place the required decoupling capacitors close to those pins. The 44-VQFN package has an exposed thermal pad rather than a conventional visible ground lead, so connect that pad to the appropriate ground plane using the manufacturer land-pattern and solder requirements. Keep the exposed-pad clearance free of unintended thermal coupling to sensitive analog nodes.
Preserve the exact package mapping when evaluating an ATXMEGA16A4-MHR, ATXMEGA16C4-MHR, ATXMEGA32A4-MHR, or ATXMEGA32D3-MHR substitute. A common 44-VQFN outline does not by itself prove that every peripheral signal, power pin, or exposed-pad arrangement is identical. Compare every numbered pin, alternate-function mapping, programming interface connection, and power requirement before releasing a replacement for production.
Do not treat a 44-VQFN XMEGA device as a transparent firmware substitution merely because the package matches. Device family, memory size, analog channels, event-system resources, interrupt behavior, and boot code can affect both application code and hardware assignments. When replacing ATXMEGA16D4-MHK, retain the original device signature, rebuild the project with the exact replacement header, retest timing-sensitive routines, and confirm programming and boot behavior on the target board.
For battery-powered designs, measure current across active, idle, and sleep operating states on the final PCB. The MCU's low-power capability cannot compensate for leakage from sensors, pull resistors, transceivers, or an always-active indicator. Enable only the peripherals required by the current task, select the appropriate clock and sleep mode, and isolate external circuitry when it must not remain powered between measurement cycles.
زانیاری پابەندبوون
The device is an industrial and general-purpose microcontroller, so AEC-Q100 is not applicable. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or the product's current material declaration.