BCM5461A1KQMG - Single-Port Gigabit Ethernet Transceiver | Broadcom
MPN: BCM5461A1KQMG ✗ کۆتایی ژیانBCM5461A1KQMG گشتی
An Ethernet transceiver, commonly called a physical-layer device or Ethernet PHY, converts digital data into electrical signaling for transmission over twisted-pair cabling. It also recovers clock and data from received signals. In the product hierarchy, BCM5461A1KQMG belongs to the Ethernet transceiver class, within network interface ICs and broader communication semiconductors.
The device supports 10 Mbps, 100 Mbps, and 1000 Mbps operation as a single-port Ethernet interface. Its 128-pin rectangular gull-wing package supports surface-mount assembly, and product listings identify the package as MSL 3. The part is also described as an Ethernet transceiver with one transceiver and 128 terminals, making it suitable for compact single-port designs that require a complete copper-network physical layer.
Technically, the BCM5461 family combines 10/100/1000BASE-T physical-layer capability with digital transceiver functions. This integration allows a network processor, communications processor, or application processor to connect directly to a copper Ethernet network. The exact clocking, register, power-supply, magnetic-interface, and operating-temperature details should be confirmed against the Broadcom datasheet before schematic release or PCB layout approval.
Typical uses include industrial Ethernet gateways, network adapters, embedded communication equipment, access systems, and control infrastructure. The three supported data rates allow one physical network interface to interoperate with legacy 10/100 equipment as well as Gigabit Ethernet links. In designs supporting both copper and other media, the device is commonly paired with isolation or line-driver circuitry selected for the board-level topology.
Layout is the main implementation concern. The 128-pin package leaves little tolerance for an improvised land pattern, so use the manufacturer package drawing and recommended reference layout. Preserve controlled-impedance routing for high-speed pairs, provide continuous return paths, decouple each supply rail locally, and place magnetic-interface components according to the datasheet reference circuit. Component placement must also account for thermal dissipation and the exact supply requirements associated with each operating mode.
This product page combines the confirmed single-port Gigabit Ethernet capability, package characteristics, lifecycle information, sourcing workflow, and practical implementation guidance. It also identifies the key distinction between a documented candidate family member and a fully verified drop-in substitute, helping engineers distinguish a PCB-compatible replacement from a merely similar Ethernet transceiver.
جێگرەوەکانی جێگۆڕکێ بۆ BCM5461A1KQMG — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.
داوای جێگرەوەکان بکەBCM5461A1KQMG زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | Ethernet transceiver |
| Number of Ports | 1 port |
| Number of Transceivers | 1 transceiver |
| Supported Data Rates | 10 Mbps, 100 Mbps, and 1000 Mbps |
| Ethernet Standards | 10/100/1000BASE-T |
| Package Type | 128-pin gull-wing surface-mount package |
| Package Shape | Rectangular |
| Terminal Count | 128 terminals |
| جۆری دامەزراندن | Surface mount |
| Moisture Sensitivity Level | MSL 3 |
| جۆری ڕووکار | Copper Ethernet |
| Media Type | Twisted-pair copper |
ڕێنمایی ڕێکخستنی پینی BCM5461A1KQMG rectangular
ڕێکخستنی پین بۆ BCM5461A1KQMG (پاکێجی rectangular). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ BCM5461A1KQMG.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
BCM5461A1KQMG گونجاوە بۆ 6 بەکارھێنانs: Industrial Ethernet Gateway, Embedded Network Adapter, Network Interface Equipment, Access and Control Terminal, Industrial Control System, Legacy Equipment Maintenance.
Industrial Ethernet Gateway
The BCM5461A1KQMG is suitable for the copper-network interface of an industrial gateway that must connect a controller to 10, 100, or 1000 Mb/s infrastructure. Its single-port 10/100/1000BASE-T capability permits autonegotiated operation across legacy and Gigabit links without adding separate Ethernet PHYs. The obsolete lifecycle status means the device is most appropriate for maintenance of an existing qualified design. A new gateway should normally use a supported transceiver after checking temperature range, clocking, isolation, and magnetic-interface requirements.
پێشنیارکراو
Embedded Network Adapter
BCM5461A1KQMG can provide the physical layer for an embedded system that needs one twisted-pair Ethernet port alongside a host processor. Supporting all three rates of 10, 100, and 1000 Mb/s allows the adapter to operate across different LAN configurations. The 128-terminal package demands careful assignment of power, clock, data, and analog functions from the Broadcom pin table. For new embedded platforms, evaluate the device’s obsolete lifecycle against supported PHYs and verify magnetic component selection and board-level isolation before committing the design.
پێشنیارکراو
Network Interface Equipment
The BCM5461A1KQMG is applicable to a one-port communications appliance or network-interface module requiring 10/100/1000BASE-T connectivity. Its integrated single-port transceiver role allows the host processor to communicate through a copper PHY while preserving a standard Ethernet connection. Design attention should center on the recommended high-speed layout, magnetic-interface network, local supply decoupling, and clock source. Because the Broadcom device is obsolete, use it primarily for repair and continuation of an existing qualified platform rather than a new long-life product.
پێشنیارکراو
Access and Control Terminal
BCM5461A1KQMG can serve as the network interface in an access terminal that links local control electronics to a central Ethernet network. Support for 10, 100, and 1000 Mb/s gives the terminal compatibility with deployed infrastructure at different performance levels. The single transceiver also keeps the physical interface focused on one copper port. Before schematic approval, confirm the device’s operating-temperature range, supply requirements, isolation implementation, and exact 128-pin footprint against the Broadcom datasheet and applicable regulatory requirements for the finished product.
پێشنیارکراو
Industrial Control System
The BCM5461A1KQMG is a candidate for the Ethernet link in a distributed industrial control system where a controller must exchange data over twisted-pair cabling. Its 10/100/1000 Mb/s support can accommodate both supervisory traffic and legacy plant networks, subject to the system’s latency and environmental requirements. Reliable implementation depends on controlled-impedance routing, adequate return paths, correctly selected magnetics, and local decoupling. New control platforms should assess a supported transceiver because the BCM5461A1KQMG is classified as obsolete.
پێشنیارکراو
Legacy Equipment Maintenance
BCM5461A1KQMG is most practical when maintaining a legacy Ethernet interface board that already uses its 128-pin package and established board-level circuitry. Retaining the original transceiver can avoid respinning a complex mixed-signal PCB while restoring a failed port. The maintenance design must still verify the device revision, supply rails, external magnetic components, and firmware configuration. Since availability is constrained by obsolete inventory, confirm the exact ordering code and inspect device documentation before installation to avoid mismatched pin or qualification requirements.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ BCM5461A1KQMG — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە |
|---|---|
| Package | 128-pin gull-wing surface-mount package |
| Brand | Broadcom |
| Product Type | Single-port Ethernet transceiver |
| Supported Data Rates | 10 Mbps, 100 Mbps, and 1000 Mbps |
| Ethernet Support | 10/100/1000BASE-T |
| Number of Ports | 1 port |
| Number of Transceivers | 1 transceiver |
| Terminal Count | 128 terminals |
| Package Shape | Rectangular |
| Moisture Sensitivity Level | MSL 3 |
| Mounting Type | Surface mount |
| Lifecycle Status | Obsolete |
جیاکەرەوە سەرەکییەکان
- Single-port integration with three supported Ethernet rates (بەراورد بەMulti-port Ethernet transceiver alternatives)
- Established 128-terminal package for legacy board continuity (بەراورد بەNewer compact-package Ethernet PHYs)
- Complete legacy copper-network rate coverage (بەراورد بەKSZ8041RNL-TR)
تێبینییەکانی دیزاین
Build the BCM5461A1KQMG layout from the 128-terminal manufacturer package drawing rather than a generic footprint. Verify every terminal assignment, pad dimension, solder-mask opening, and courtyard clearance against the Broadcom documentation. Preserve the component orientation and pin-1 marking, and route the high-speed differential pairs as controlled-impedance nets using the actual PCB stack-up.
Place the PHY and its decoupling capacitors close to the associated supply and ground terminals. Keep copper-backed ground continuity beneath high-speed signal routes, avoid splits or voids in reference planes, and minimize the copper area surrounding sensitive analog and clock nets. Follow the manufacturer reference schematic for magnetic components, termination, and isolation because the external network interface has strong influence on signal integrity.
Do not substitute the BCM5461A1KQMG solely because another Ethernet PHY also supports 10/100/1000BASE-T. Confirm the 128-terminal footprint, exact pin functions, clocking scheme, supply rails, reset requirements, and line-driver or magnetic-interface topology first. The device is obsolete, so a family ordering code with a similar name should be accepted only after a complete electrical and mechanical comparison.
زانیاری پابەندبوون
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status is stated for this exact ordering code. The product is identified as obsolete and has a moisture sensitivity level of MSL 3.