BCM8706SBIFBG - 10GbE XAUI-to-XFI LAN PHY | Broadcom
MPN: BCM8706SBIFBG ✓ چالاکBCM8706SBIFBG گشتی
An Ethernet transceiver is an integrated circuit that converts parallel or serial digital data into electrical signaling suitable for a physical network medium. The BCM8706SBIFBG belongs to the PHY family within the broader network-interface hierarchy. A PHY handles signal generation, clocking, receive equalization, and link signaling, while a MAC handles higher-level packet processing. In a 10GbE system, this component allows a switch or endpoint ASIC with XAUI circuitry to connect to a smaller SFP+ or XFP module through an XFI interface.
The manufacturer identifies the part as a 10GbE and 10GFC XAUI-to-XFI LAN PHY. This interface arrangement is important because XAUI is commonly used for wider internal chip-to-chip links, whereas XFI is designed for compact optical-module connections. Integrating the bridge into the PHY reduces the number of external high-speed conversion stages while preserving a standardized path to an optical module. The supplied distributor listing identifies the device as a 256-FBGA package.
The 256-ball package provides the high-density interconnect required for simultaneous differential XAUI and XFI signaling, power delivery, reference-clock connections, control interfaces, and configuration signals. Because it is a flip-chip BGA rather than a leaded package, the PCB must use an appropriate land pattern, via structure, assembly profile, and thermal strategy. Package dimensions, ball assignments, voltage rails, operating temperature, and electrical performance tables should be taken directly from the Broadcom manufacturer datasheet when laying out a production board.
Typical uses include 10GbE Ethernet switching systems, line cards, packet-processing platforms, server connectivity, and network-interface modules. In a switch design, the BCM8706SBIFBG can terminate an internal XAUI connection and present an XFI interface to an SFP+ cage and optical transceiver. In server or appliance designs, it can support an XAUI-based processor or switching silicon while connecting to a pluggable optical module over a controlled-length XFI channel.
Layout is the primary engineering consideration for this device. Route XAUI and XFI differential pairs as controlled-impedance nets on adjacent layers with continuous reference planes, minimize stubs and vias, and observe the differential pair spacing and length-matching rules in the manufacturer datasheet. Decoupling must be placed directly at the relevant supply pins. Because the 13 mm by 13 mm BGA concentrates a large number of high-speed and power connections, assembly yield, solder-paste volume, via-in-pad practice, and thermal spreading should be reviewed before release to manufacturing.
This product page combines the confirmed interface and package information with practical guidance for high-speed PCB design, sourcing, and component selection. Before committing a layout or production release, engineers should validate every power rail, timing requirement, ball assignment, reference circuit, and AC/DC characteristic against the Broadcom manufacturer datasheet for BCM8706SBIFBG.
جێگرەوەکانی جێگۆڕکێ بۆ BCM8706SBIFBG — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.
داوای جێگرەوەکان بکەBCM8706SBIFBG زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | 10GbE XAUI-to-XFI LAN PHY transceiver |
| Ethernet Data Rate | 10 Gb/s |
| Protocol Support | 10GbE and 10GFC |
| Host-Side Interface | XAUI |
| Network-Side Interface | XFI LAN PHY |
| Device Classification | Ethernet transceiver |
| Package Type | 256-ball flip-chip BGA |
| Package Designation | 256-FBGA |
| Package Dimensions | 13 mm x 13 mm |
| جۆری دامەزراندن | Surface mount |
ڕێنمایی ڕێکخستنی پینی BCM8706SBIFBG 13 mm x 13 mm
ڕێکخستنی پین بۆ BCM8706SBIFBG (پاکێجی 13 mm x 13 mm). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ BCM8706SBIFBG.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
BCM8706SBIFBG گونجاوە بۆ 6 بەکارھێنانs: 10GbE Ethernet Switching Platforms, SFP+ and XFP Network Line Cards, Packet-Processing Platforms, Server 10GbE Network Interfaces, 10GFC Data-Link Equipment, Network Interface Card and Adapter Designs.
10GbE Ethernet Switching Platforms
The BCM8706SBIFBG fits a 10GbE switching platform that connects an XAUI-based switching ASIC to an XFI pluggable optical interface. The confirmed 10GbE rate and XAUI-to-XFI translation let the switch line card use one physical-layer device for the internal chip-to-chip link and the external module path. The design must follow the manufacturer’s ball map, differential-routing rules, reference-clock architecture, and decoupling requirements. Its 256-FBGA format also requires a land pattern and assembly process capable of handling 13 mm by 13 mm flip-chip BGA devices without compromising high-speed return paths.
پێشنیارکراو
SFP+ and XFP Network Line Cards
The BCM8706SBIFBG is appropriate for line cards where internal switch or packet-processing silicon communicates through XAUI and the field-side interface terminates in an SFP+ or XFP cage. The device converts the internal XAUI signal path into the XFI LAN PHY interface expected by the optical module. This arrangement can shorten the high-speed module connection while preserving a standardized 10GbE architecture. Board-level success depends on exact lane widths, clocking, equalization, channel-length, and power requirements from the Broadcom manufacturer datasheet, together with an assembly-ready 256-ball BGA land pattern.
پێشنیارکراو
Packet-Processing Platforms
The BCM8706SBIFBG can serve as the physical-layer interface in a packet-processing platform that separates high-throughput network I/O from the system’s protocol-processing logic. An XAUI processor or switching ASIC can connect to the BCM8706SBIFBG, which then provides an XFI-facing path toward an optical module. At 10GbE, the implementation is performance-sensitive: differential impedance, return-path continuity, connector and cage placement, reference clock jitter, and power distribution all affect margin. The compact 256-FBGA helps preserve routing flexibility but demands thermal and assembly planning at the same time.
پێشنیارکراو
Server 10GbE Network Interfaces
The BCM8706SBIFBG fits a server network interface in which an I/O ASIC exposes XAUI and an SFP+ or XFP module supplies the external 10GbE connection. The XAUI-to-XFI bridge allows the internal high-speed path and module-facing path to be designed separately, which can simplify module integration while retaining 10GbE operation. Designers must enforce the manufacturer’s trace-length, differential-pair, loss, reference-clock, and power-supply requirements. Thermal design should account for local heating around the 13 mm by 13 mm BGA, while production planning should validate paste printing, via-in-pad stenciling, and inspection coverage.
پێشنیارکراو
10GFC Data-Link Equipment
The BCM8706SBIFBG is identified with 10GFC positioning in addition to 10GbE, making it relevant to equipment that bridges an XAUI-based 10GFC data path to an XFI LAN interface. The application still requires careful separation of protocol expectations, clock domains, coding, lane behavior, and physical-layer constraints. Because the verified distributor information identifies the function but does not enumerate complete protocol or timing limits, engineers should use the Broadcom manufacturer datasheet as the controlling source before applying the device to a production Fibre Channel or 10GFC system.
پێشنیارکراو
Network Interface Card and Adapter Designs
The BCM8706SBIFBG can support a dedicated 10GbE network interface card built around XAUI-capable controller silicon and a pluggable optical module. The device provides the physical-layer bridge between the controller’s internal XAUI lanes and the module’s XFI interface, allowing the adapter to target existing 10GbE optical-module ecosystems. A practical design must reserve the correct ball escapes, maintain short power and ground paths, and control differential impedance on both high-speed interface segments. The 256-FBGA also makes component placement, solder-paste tuning, thermal spreading, and manufacturing yield important system-level considerations.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ BCM8706SBIFBG — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە |
|---|---|
| Brand | Broadcom |
| Package | 256-FBGA, 13 mm x 13 mm |
| Device Type | Ethernet transceiver |
| Ethernet Data Rate | 10 Gb/s |
| Protocol Positioning | 10GbE and 10GFC |
| Host-Side Interface | XAUI |
| Network-Side Interface | XFI LAN PHY |
| Mounting Type | Surface mount |
| Supplier Match Percentage | Not applicable |
جیاکەرەوە سەرەکییەکان
- Integrated high-speed bridge function (بەراورد بەGeneric single-interface Ethernet PHY options)
- Compact 256-ball package (بەراورد بەLarger leaded or multi-chip interface implementations)
- 10GbE and 10GFC positioning (بەراورد بەDevices limited to general-purpose Ethernet interfaces)
تێبینییەکانی دیزاین
Route XAUI and XFI as controlled-impedance differential pairs with continuous reference planes, minimal vias, and no unterminated stubs. Follow the exact lane widths, spacing, maximum transition count, and length-matching rules in the Broadcom manufacturer datasheet. Place the device near the XFI module cage or connector when practical, and keep the XAUI interface over a similarly stable reference plane. Do not substitute a generic differential-pair rule for the manufacturer’s channel and package constraints.
Assign every power and ground ball from the manufacturer ball map, then place low-inductance decoupling capacitors directly at the relevant package balls. Use the datasheet’s prescribed capacitor values, voltage ratings, and rail-separation requirements. Provide adequate plane or polygon connectivity around the 13 mm by 13 mm BGA and minimize shared-current paths between high-speed transceiver circuits and other noisy loads. Validate the completed rail network with appropriate power-integrity analysis before production release.
The BCM8706SBIFBG’s 256-FBGA concentrates power delivery and high-speed routing in a compact area. Spread heat through the PCB copper planes, maintain uninterrupted thermal-via patterns under or near the device, and use the land pattern specified by Broadcom. Estimate junction temperature from actual board copper, airflow, nearby heat sources, and the package thermal data rather than relying only on package dimensions. Confirm that the enclosure and optical-module arrangement do not obstruct convective or conductive cooling.
Do not treat the similarly named BCM8706BIFBG as a drop-in substitute without checking its exact suffix, ball map, electrical tables, and ordering information. Also avoid copying a generic 256-BGA library: the confirmed package is 13 mm by 13 mm and its device-specific balls determine every high-speed and power connection. Validate the assembly process for the 256-FBGA, including paste volume, via-in-pad use, solder-mask definition, stencil aperture, and inspection coverage.
زانیاری پابەندبوون
The verified product records confirm manufacturer identity, interface positioning, Ethernet data rate, and package information, but they do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.