C8051F353-GM - 50MHz 8-Bit Mixed-Signal MCU | Silicon Labs
MPN: C8051F353-GM ✓ چالاکC8051F353-GM گشتی
A mixed-signal microcontroller is a semiconductor that combines a digital processor core with analog-to-digital and digital-to-analog conversion functions. The C8051F353 belongs to the C8051 family of 8-bit microcontrollers, combining the C8051 processing hierarchy with embedded flash memory, analog acquisition, signal generation, and digital communication peripherals. This integration can reduce external component count in compact embedded systems while keeping analog measurements and control functions close to the processing core.
Key features include 50 MHz core performance, 8 KB of ISP Flash, 0.75 KB of RAM, and a maximum ADC conversion rate of 1 ksps. The 16-bit ADC uses an 8-input multiplexer with programmable gain from 1x to 128x, supporting measurements across a range of sensor and analog-control signals. The 2-channel 8-bit DAC provides digital-to-analog output for control, excitation, or signal-generation functions.
The C8051F353 combines a pipelined 8051 core with dedicated analog peripherals in a compact 28-MLP surface-mount package. Its four 16-bit timers support accurate timing, pulse measurement, and periodic control tasks. The 8-bit system architecture and 8 KB Flash capacity are suited to compact products that need deterministic peripheral control without the memory overhead of a larger general-purpose processor.
Typical uses include industrial sensor acquisition, temperature measurement, analog process control, small motor or actuator controllers, communication equipment, and compact embedded instruments. The integrated temperature sensor supports local thermal monitoring, while the ADC, DAC, and comparator enable closed-loop analog control without requiring several discrete converters.
PCB design should preserve clean analog signal paths, place analog supply bypassing close to the device, and route communications and high-speed digital signals away from sensitive analog inputs. The 5 x 5 mm MLP footprint also requires careful land-pattern, solder-joint, and thermal-relief design. Firmware must account for the 0.75 KB RAM limit and the 8 KB Flash allocation when organizing code, boot logic, and calibration data.
This product page combines the manufacturer specifications with practical application guidance, package-aware sourcing information, and verified lifecycle details. It also distinguishes the exact C8051F353-GM ordering code from devices that use a different package, tape orientation, memory configuration, or peripheral set.
جێگرەوەکانی جێگۆڕکێ بۆ C8051F353-GM — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.
داوای جێگرەوەکان بکەC8051F353-GM زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Core Architecture | 8051, 8-bit |
| Maximum Core Frequency | 50 MHz |
| Flash Memory | 8 KB |
| RAM | 0.75 KB |
| ADC Resolution | 16-bit |
| ADC Channels | 8 channels |
| Maximum ADC Conversion Rate | 1 ksps |
| ADC Programmable Gain | 1x to 128x |
| DAC Resolution | 8-bit |
| DAC Channels | 2 channels |
| Comparator Count | 1 |
| Timer Count | 4 x 16-bit |
| On-Chip Temperature Sensor | Yes |
| Programming Interface | In-System Programming (ISP) |
| پاکێج | 28-MLP, 5 x 5 mm |
| جۆری دامەزراندن | Surface Mount |
| ADC Integral Nonlinearity | 0.0015% |
ڕێنمایی ڕێکخستنی پینی C8051F353-GM 28-mlp, 5 x 5 mm
ڕێکخستنی پین بۆ C8051F353-GM (پاکێجی 28-mlp, 5 x 5 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ C8051F353-GM.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
C8051F353-GM گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor Acquisition, Temperature Monitoring and Control, Analog Signal Generation, Compact Motor and Actuator Control, Communication Equipment, Embedded Test and Measurement.
Industrial Sensor Acquisition
The C8051F353-GM fits compact industrial sensor modules that must acquire several analog inputs without a separate converter IC. Its 16-bit, 8-channel ADC supports conversion rates up to 1 ksps, while programmable gain from 1x to 128x can accommodate sensors with different signal ranges. The 50 MHz 8051 core can execute filtering, offset correction, scaling, and threshold logic on the 8 KB Flash and 0.75 KB RAM budgets. A practical design places the analog input traces away from digital communication routes, references the ADC supply close to the device, and uses the on-chip comparator for fast limit detection while the ADC handles measurements.
پێشنیارکراو
Temperature Monitoring and Control
The C8051F353-GM supports compact thermal monitoring systems through its integrated temperature sensor and 16-bit ADC. The sensor can track local device or board temperature, while external ADC channels can monitor thermistors, RTDs, or instrumentation amplifiers when higher measurement accuracy is needed. The 8051 core can apply calibration, hysteresis, filtering, and alarm thresholds before transmitting data over a communication interface. The 8 KB Flash footprint is sufficient for compact control logic, although the 0.75 KB RAM requires careful buffer sizing. Firmware should also distinguish on-chip temperature measurements from calibrated external sensor readings.
پێشنیارکراو
Analog Signal Generation
The C8051F353-GM can generate programmable analog output using its integrated 8-bit, 2-channel DAC. This makes it suitable for sensor excitation, actuator reference signals, simple waveform generation, and compact industrial control panels. The two DAC channels can produce independent values under firmware control, while the 50 MHz processor performs calculation and updates. Because the converter has 8-bit resolution, output quantization and reference accuracy directly influence signal quality. Use a stable reference implementation, decouple the analog supply, and filter the output when the application requires a smoother waveform or lower noise.
پێشنیارکراو
Compact Motor and Actuator Control
The four 16-bit timers in the C8051F353-GM support compact motor and actuator controllers that require precise timing alongside analog feedback. Timer channels can organize PWM generation, input capture, periodic scheduling, and timing-based control, while the ADC monitors current, position, or temperature. The 50 MHz core provides useful computation headroom for closed-loop logic, and the 0.75 KB RAM limits how much historical motion data can be buffered. Use current sensing with protection appropriate to the load, keep switching nodes away from ADC traces, and confirm the external driver topology and switching losses during thermal design.
پێشنیارکراو
Communication Equipment
The C8051F353-GM is suitable for compact communication equipment that needs local control and monitoring beside a communications interface. Its integrated communications peripherals, 50 MHz 8051 core, four timers, and mixed-signal resources allow a single device to handle protocol-related timing, status indicators, analog thresholds, and configurable outputs. The 8 KB Flash and 0.75 KB RAM are appropriate for lightweight protocol stacks or supervisory firmware rather than large buffering applications. Board layout should separate communication signals from the ADC and DAC paths, provide clean references, and use controlled impedance routing when the selected interface requires it.
پێشنیارکراو
Embedded Test and Measurement
The C8051F353-GM can serve as the control core in compact handheld or embedded measurement products that combine acquisition, excitation, and display support. The 16-bit ADC improves resolution for many instrumentation signals, the dual DAC supports reference or stimulus outputs, and the comparator can provide immediate threshold events. Four 16-bit timers are useful for sample timing, pulse-width measurement, and periodic calibration. Designers should use the 0.75 KB RAM wisely, avoid unbounded sample buffering, and account for analog settling time at the 1 ksps maximum conversion rate. A shielded analog layout and stable reference are especially important in low-level measurements.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ C8051F353-GM — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە |
|---|---|
| Package | 28-MLP (5 x 5 mm) |
| Brand | Silicon Labs |
| Core Architecture | 8051, 8-bit |
| Maximum Core Frequency | 50 MHz |
| Flash Memory | 8 KB |
| RAM | 0.75 KB |
| ADC | 16-bit, 8-channel, up to 1 ksps |
| DAC | 8-bit, 2-channel |
| Timers | 4 x 16-bit |
| Programming | In-System Programming (ISP) |
جیاکەرەوە سەرەکییەکان
- Integrated mixed-signal resources reduce external converter count (بەراورد بەC8051F351-GM)
- Compact 5 x 5 mm integration (بەراورد بەC8051F381-GM)
- Deterministic timing resources for mixed-signal control (بەراورد بەC8051F850-C-GM)
تێبینییەکانی دیزاین
Keep ADC input traces short and isolate them from digital communication and switching signals. Route analog and digital returns so switching currents do not flow beneath the converter inputs. Place input and output capacitors close to their associated device pins, use a stable analog reference, and consult the manufacturer layout guidance in the C8051F353 datasheet before finalizing the 5 x 5 mm MLP land pattern.
Separate sensitive analog supply paths from noisy digital loads and use local bypass capacitors at the device supply pins. Because the exact supply-voltage and operating-current limits are not stated on the product page, confirm them in the manufacturer datasheet before selecting capacitors or regulators. Include adequate startup and shutdown behavior for the ADC, DAC, comparator, and communications peripherals in the system power sequence.
Do not assume that every C8051F35x member has the same pin functions or the same MLP dimensions. Verify the C8051F353 package drawing, exposed-pad requirements, and pin-description table, and program the device using the configuration and clock settings documented for C8051F353. Also account for the 8 KB Flash and 0.75 KB RAM limits before adding protocol libraries or buffered sampling.
Treat the analog converter reference as a precision signal and avoid routing it adjacent to high-current or high-speed digital nets. The ADC's programmable gain of up to 128x can amplify small signals along with offset, noise, and coupling. Establish the input bandwidth required by the application, use appropriate source impedance, and verify acquisition settling with the selected gain rather than relying only on the maximum 1 ksps conversion rate.
زانیاری پابەندبوون
The C8051F353-GM product information does not explicitly establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm the applicable declarations for the exact ordering code with the manufacturer.