C8051F501-IQ - 50MHz 8-bit MCU, 64KB Flash | Silicon Labs
MPN: C8051F501-IQ ✓ چالاکC8051F501-IQ گشتی
A microcontroller is a programmable system-on-chip that integrates a CPU, memory, peripherals, and I/O into one package. The C8051F501-IQ belongs to the C8051F50x family of mixed-signal ISP flash MCUs. Its combination of a 50 MHz 8051-compatible core, 64 KB of nonvolatile program memory, and mixed-signal peripherals makes it suitable for compact control systems that need deterministic embedded processing without a separate analog front end.
The device operates at up to 50 MIPS and includes approximately 4 KB of on-chip RAM, depending on the selected package and device variant. Its 12-bit ADC supports measurement tasks commonly found in motor-control, industrial instrumentation, and communications equipment. SPI, UART, and I2C connectivity allows the MCU to interface with sensors, transceivers, memories, displays, and host processors without requiring numerous external interface devices.
The C8051F501-IQ is designed for 1.8 V, 3.3 V, and 5 V systems, with a documented operating-temperature range of -40°C to +125°C. That range supports both commercial and industrial environments where temperature changes, supply variation, and long service intervals can affect embedded equipment. Its 48-pin TQFP-48 package also provides more peripheral I/O than smaller 32-pin implementations.
Typical uses include industrial sensor controllers, communication modules, data-acquisition equipment, appliance controls, and embedded motor or process-control platforms. Engineers can use the on-chip ADC for sensor conditioning and the three serial interfaces for higher-bandwidth expansion. Firmware can be programmed through the C8051 in-system programming architecture, supporting development, production programming, and field-service workflows.
PCB implementation should preserve the manufacturer’s recommended power, decoupling, clock, and programming-pin arrangements. Because the 48-pin package exposes many I/O options, assigning alternate functions early helps prevent conflicts between analog inputs, serial interfaces, and general-purpose digital signals. Confirm the exact pin-description table and peripheral multiplexing for the selected device revision before final routing.
This page combines the C8051F501-IQ operating profile, verified distributor availability, same-package replacement guidance, and practical selection criteria to support schematic capture, PCB layout, sourcing, and long-term product maintenance decisions.
جێگرەوەکانی جێگۆڕکێ بۆ C8051F501-IQ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ C8051F501-IQ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Product Type, ADC Resolution, Package, ADC Channels, Digital I/O Lines.
C8051F501-IQR
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
C8051F500-IQ
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →C8051F502-IQ
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →C8051F504-IQ
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
C8051F506-IQ
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
C8051F501-IQ زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 8-bit mixed-signal flash microcontroller |
| Processor Family | 8051-compatible C8051 core |
| زۆرترین فرێکوێنسیی کاتژمێر | 50 MHz |
| Maximum Instruction Rate | 50 MIPS |
| Flash Memory | 64 KB |
| Program Memory Organization | 64K x 8 |
| On-Chip RAM | Approximately 4 KB |
| ADC Resolution | 12 bit |
| Supply Voltage Range | 1.8 V to 5.25 V |
| Nominal Supply Options | 2.5 V, 3.3 V, and 5 V |
| مەودای پلەی گەرمیی کارکردن | -40°C to +125°C |
| پاکێج | 48-pin TQFP, 7 x 7 mm |
| جۆری دامەزراندن | Surface mount |
| Serial Interfaces | SPI, UART, and I2C |
| Programming Method | In-system programming |
| دۆخی RoHS | Compliant |
ڕێنمایی ڕێکخستنی پینی C8051F501-IQ 48-pin tqfp, 7 x 7 mm
ڕێکخستنی پین بۆ C8051F501-IQ (پاکێجی 48-pin tqfp, 7 x 7 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ C8051F501-IQ.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
C8051F501-IQ گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor Controllers, Data Acquisition Equipment, Communication and Protocol Modules, Appliance and Equipment Control, Motor and Process Control, Embedded Programmable Control.
Industrial Sensor Controllers
The C8051F501-IQ fits industrial sensor controllers because its 12-bit ADC can acquire analog sensor signals while the 50 MHz 8051-compatible core performs filtering, control calculations, and protocol handling. Its 1.8 V to 5.25 V supply range supports industrial 3.3 V and 5 V designs, while the -40°C to +125°C rating covers demanding ambient conditions. The device can place the sensor interface, control logic, and SPI, UART, or I2C communications in one 48-pin TQFP package. Designers should confirm the ADC input range and acquisition timing for the selected sensor and preserve clean analog grounding around the measurement circuitry.
پێشنیارکراو
Data Acquisition Equipment
The C8051F501-IQ is suitable for compact data-acquisition equipment that must combine analog measurement with local processing and digital communications. Its 12-bit ADC provides the basic conversion function, while the 50 MHz processor supports acquisition sequencing, calibration, digital filtering, and data formatting. SPI and UART interfaces can connect to external sensors, memory, or a host controller, and the approximately 4 KB RAM provides working space for buffers. For accurate measurements, designers should allocate separate analog and digital supply paths, follow the recommended bypass-capacitor arrangement, and avoid routing high-current outputs beneath sensitive ADC inputs.
پێشنیارکراو
Communication and Protocol Modules
The C8051F501-IQ can serve as the control element in compact communication modules because it combines a 50 MIPS processing rate with SPI, UART, and I2C interfaces. The UART supports conventional serial links, while SPI offers higher-throughput connectivity to radio, memory, or display components. Its 64 KB flash provides room for protocol stacks, configuration data, and application firmware, while the 48-pin TQFP package exposes enough I/O for status indicators, control signals, and multiple serial resources. Clocking and communication levels must match the external devices, and unused pins should be configured deliberately to avoid contention during startup or firmware updates.
پێشنیارکراو
Appliance and Equipment Control
The C8051F501-IQ is well suited to appliance and equipment control because it combines a fast 8-bit core, mixed-signal conversion, and multiple serial interfaces in one package. A controller can use the ADC for temperature, level, or position sensing, then operate relays or indicators through digital outputs while communicating with a display or service interface through UART, SPI, or I2C. The 1.8 V to 5.25 V supply flexibility helps bridge legacy and modern logic levels. Designers should include suitable driver transistors, protection networks, and fail-safe defaults because the MCU controls external power paths that may remain energized during a reset or firmware fault.
پێشنیارکراو
Motor and Process Control
The C8051F501-IQ can support motor or process-control subsystems that require deterministic control and analog feedback. Its 50 MHz core can execute control and commutation logic, while the 12-bit ADC measures feedback signals from current, position, temperature, or pressure sensors. UART and SPI allow connection to power stages, position sensors, or supervisory controllers, and the broad temperature range supports industrial environments. The MCU should not directly drive inductive or high-power loads; use appropriately rated gate drivers and power electronics. Timing, filtering, and isolation design remain critical for accurate closed-loop behavior and dependable operation beside switching power stages.
پێشنیارکراو
Embedded Programmable Control
The C8051F501-IQ fits embedded programmable control systems that require local logic, nonvolatile firmware, and flexible communications without a higher-cost application processor. The 64 KB flash stores application code and configuration, while approximately 4 KB of RAM supports working buffers and protocol state. Its in-system programming architecture simplifies development and production programming, and the 48-pin package provides numerous digital I/O options for sensors and actuators. Engineers should follow the manufacturer's programming interface and reset requirements, validate clock startup behavior, and include recovery provisions that remain accessible if a firmware update interrupts normal operation.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ C8051F501-IQ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | C8051F501-IQR | C8051F500-IQ | C8051F502-IQ | C8051F504-IQ | C8051F506-IQ |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 48-pin TQFP (7 x 7 mm) | 48-pin QFP | 48-pin TQFP | 48-pin TQFP | 48-pin TQFP | 48-pin TQFP |
| Processor Architecture | 8-bit 8051-compatible C8051 | 8-bit 8051-compatible C8051 | 8-bit C8051 | 8-bit C8051 | 8-bit C8051 | 8-bit C8051 |
| Maximum Clock Frequency | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
جیاکەرەوە سەرەکییەکان
- Specified 64 KB flash and approximately 4 KB RAM allocation (بەراورد بەC8051F504-IQ)
- 50 MHz processing with integrated 12-bit mixed-signal conversion (بەراورد بەC8051F500-IQ)
- Three named serial interfaces on one 8-bit MCU (بەراورد بەC8051F506-IQ)
تێبینییەکانی دیزاین
Decouple each supply pin near the package with the capacitance and placement specified in the manufacturer datasheet. Keep analog and digital return-current paths controlled so switching current does not share the ADC reference return. Because the device supports 1.8 V to 5.25 V, verify that external serial devices, pull resistors, and programming circuitry use compatible logic levels at the selected operating voltage.
Assign the 48-pin TQFP functions before routing and check alternate-function multiplexing for every ADC, communication, clock, reset, and programming signal. Route analog inputs away from high-current digital outputs and switching-supply nodes. Follow the manufacturer package drawing for exposed-pad or thermal requirements, and maintain symmetric short connections where timing-sensitive serial or clock signals leave the device.
Do not treat a related C8051F50x order code as interchangeable without checking the flash capacity, RAM, ADC channels, serial peripheral availability, and alternate pin functions. The 50 MHz core and 64 KB flash do not guarantee firmware compatibility across every family member. Validate the reset and in-system programming circuit, confirm the configured clock source, and ensure unused input pins cannot float during startup.
زانیاری پابەندبوون
RoHS compliance is identified in the verified LCSC listing. No separate REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 qualification statement is identified.