CD4046BCM - 1.6 MHz Micropower PLL | onsemi | Clock & Timing
MPN: CD4046BCM ✗ کۆتایی ژیانCD4046BCM گشتی
A phase-locked loop is a feedback-control system that belongs to the clock and timing IC hierarchy. The comparator measures phase or frequency error between two signals, while the VCO produces an output whose frequency can be adjusted by a control voltage. When the feedback and reference signals agree, the loop reduces the error and maintains a stable relationship between them. This makes PLDs useful when a circuit must generate, divide, demodulate, track, or synchronize a timing signal.
The CD4046BCM is identified specifically as a micropower PLL and is a 1.6 MHz part. Its internal VCO, source follower, zener diode, and dual phase-comparator arrangement provide the principal functional blocks needed for closed-loop timing control. The source follower can provide a buffered control path for the VCO, while the zener provides a stable voltage reference within the IC. External resistors and capacitors determine the VCO frequency range and establish the loop dynamics.
The 16-pin SOIC package provides a surface-mount implementation for applications requiring a compact phase-locking subsystem. Its external frequency-setting and loop-filter components allow the operating range to be adapted to a reference frequency and required capture bandwidth. Designers should also account for comparator propagation delay, VCO gain, component tolerance, and startup behavior when setting loop bandwidth; these values should be confirmed from the manufacturer datasheet before finalizing timing margins.
Typical uses include frequency synthesis, frequency multiplication and division, tone generation, FM or phase demodulation, clock recovery, and synchronization of a local oscillator to an external reference. In a receive chain, the PLL can compare an incoming signal with an internally generated feedback signal and correct its VCO until the two agree. In a transmit chain, it can produce a stable carrier whose phase is controlled relative to a reference.
The principal design consideration is loop stability. The phase-comparator type, VCO gain, limiting resistors, loop filter, and input frequency range must be selected together; excessive loop gain can produce ringing or oscillation, while insufficient gain can increase phase error. Keep the VCO timing components close to the device, maintain a clean return path, and compare the timing margin against temperature and supply-voltage changes.
This product page combines the exact device identity, package information, functional block description, structured specifications, practical application guidance, and qualified replacement considerations. It is intended to help engineers determine whether the CD4046BCM fits a timing-control design before committing the 16-pin SOIC footprint to a PCB.
جێگرەوەکانی جێگۆڕکێ بۆ CD4046BCM — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ CD4046BCM (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Maximum Operating Frequency, Package.
CD4046BM
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
CD4046BCM تایبەتمەندییەکان
| Product Type | Micropower phase-locked loop (PLL) |
| Manufacturer | onsemi |
| Maximum Operating Frequency | 1.6 MHz |
| پاکێج | 16-SOIC (0.154 in, 3.90 mm width) |
| ژمارەی پین | 16 pins |
| جۆری دامەزراندن | Surface mount |
| Integrated VCO | Yes, low-power linear voltage-controlled oscillator |
| Phase Comparator Count | 2 phase comparators |
| Source Follower | Yes |
| Internal Zener Diode | Yes |
| Power Class | Micropower |
ڕێنمایی ڕێکخستنی پینی CD4046BCM 16-soic (0.154 in, 3.90 mm width)
ڕێکخستنی پین بۆ CD4046BCM (پاکێجی 16-soic (0.154 in, 3.90 mm width)). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ CD4046BCM.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
CD4046BCM گونجاوە بۆ 6 بەکارھێنانs: Frequency Synthesis and Multiplication, FM Signal Demodulation, Clock Synchronization, Tone Generation and Frequency Control, Phase and Frequency Detection, Low-Power Instrumentation.
Frequency Synthesis and Multiplication
The CD4046BCM fits frequency-synthesis designs because its 1.6 MHz device rating provides a useful operating range for low-to-moderate clock and carrier signals. The integrated low-power linear VCO establishes an adjustable output frequency, while the two phase comparators detect disagreement between a reference signal and the divided feedback path. A practical implementation compares the reference against a feedback divider and uses the resulting phase error to steer the VCO. External timing components set the VCO range, while the loop filter controls bandwidth and damping. The 16-pin SOIC supports compact surface-mount layouts, but the engineer must confirm the exact operating and electrical limits in the manufacturer datasheet before setting the loop components.
FM Signal Demodulation
The CD4046BCM is suitable for FM demodulation because its phase-locked loop can track the instantaneous frequency of a modulated carrier. The linear VCO supplies an adjustable signal for comparison with the incoming carrier, and the phase-comparator arrangement converts the phase or frequency difference into a correction signal for the loop. A loop filter then removes high-frequency error components and recovers the underlying modulation waveform. Design the capture and tracking ranges around the intended carrier band, and verify signal amplitude, distortion, and acquisition time against the manufacturer electrical characteristics. Because the device is specified as micropower and rated up to 1.6 MHz, it is most relevant to compact low-frequency or moderate-frequency demodulation stages.
Clock Synchronization
The CD4046BCM can be used to synchronize a locally generated clock or oscillator to an external reference. Its VCO creates the adjustable local signal, and the phase comparators measure the error between that signal and the reference or feedback waveform. Closing this comparison path corrects phase and frequency drift, which is valuable when multiple subsystems need a common timing relationship. The design must use the appropriate comparator configuration, establish VCO timing with external components, and choose a loop filter that meets both acquisition time and jitter objectives. The 16-pin SOIC package keeps the implementation compact, while external timing parts should be positioned close to the IC to reduce propagation delay and coupling into the control loop.
Tone Generation and Frequency Control
The CD4046BCM can generate a controllable tone by operating its VCO in a closed loop with a stable reference. In this arrangement, a divider establishes the relationship between the VCO output and reference, and the phase comparator corrects any drift. External resistors and capacitors define the timing range, allowing the same device family to serve several tone frequencies if the component values and control network are designed appropriately. The headline 1.6 MHz operating capability supports moderate-frequency signal generation, but usable frequency, amplitude, and distortion depend on the detailed application conditions. Check VCO gain and nonlinearities at the highest desired frequency, and use a stable reference and clean ground return to minimize phase noise and frequency jitter.
Phase and Frequency Detection
The CD4046BCM can be used as a phase-and-frequency detection subsystem when a comparator output is needed to indicate the relationship between two signals. Its two internal phase comparators allow the external loop architecture to select the behavior best suited to the application, while the VCO and source follower provide the controllable and buffered elements needed to close a feedback loop. This arrangement can supervise a feedback divider, detect excessive phase error, or form the core of a timing-recovery circuit. The comparator mode and output-drive configuration must be selected directly from the manufacturer connection and application diagrams, especially because the two phase comparators are not necessarily interchangeable. Validate acquisition behavior and output levels under the intended supply and loading conditions.
Low-Power Instrumentation
The CD4046BCM suits compact instrumentation that requires frequency locking without a separate collection of analog and digital timing functions. Its micropower designation is relevant to portable test equipment, and the integrated VCO, source follower, zener, and two comparators reduce the number of discrete blocks around the timing loop. The device can lock an internal oscillator to a reference, produce a stable excitation tone, or support phase-sensitive measurement. Keep external timing components stable and inspect their tolerance and temperature coefficient because they may dominate frequency accuracy. The manufacturer datasheet should define the supply current, operating range, output drive, and comparator performance that set the practical battery and instrumentation budgets.
داتای سەرچاوەی ئەندازیاری بۆ CD4046BCM — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | CD4046BM |
|---|---|---|
| Brand | onsemi | onsemi |
| Package | 16-SOIC (0.154 in, 3.90 mm width) | 16-SOIC (0.154 in, 3.90 mm width) |
| Product Type | Micropower phase-locked loop | Micropower phase-locked loop |
| Integrated VCO | Yes, low-power linear VCO | Yes, low-power linear VCO |
| Phase Comparator Count | 2 phase comparators | 2 phase comparators |
| Source Follower | Yes | Yes |
| Internal Zener Diode | Yes | Yes |
جیاکەرەوە سەرەکییەکان
- Integrated timing blocks in a 16-pin surface-mount package (بەراورد بەMC14046B)
- Directly identified 1.6 MHz operating class (بەراورد بەCD4046BM)
- Onsemi 16-SOIC implementation (بەراورد بەCD74HCT4046AE)
تێبینییەکانی دیزاین
Place the VCO timing components directly beside the relevant CD4046BCM pins and keep the feedback path compact. The manufacturer datasheet connection diagram should be used to identify the VCO, source-follower, comparator, and ground nets on the exact 16-SOIC device. A short feedback route reduces propagation delay and helps the phase loop acquire lock more predictably.
Budget the CD4046BCM supply current across static operation, comparator transitions, and VCO activity rather than relying only on the micropower description. Add the current consumed by external timing components and any logic connected to the comparator outputs. Confirm the allowable input-voltage range and quiescent current in the manufacturer datasheet before selecting the supply regulator and battery capacity.
Do not assume that any device labeled 4046 or 4046B is a drop-in replacement. Verify package geometry, supply range, VCO frequency range, phase-comparator outputs, and source-follower behavior. The CD74HCT4046AE is described as family-level pin-compatible with CD4046B, but its shown ordering suffix does not establish the same 16-SOIC footprint as CD4046BCM.
Choose the loop filter to balance acquisition speed against phase jitter, then verify the complete design with startup and worst-case timing measurements. Comparator propagation delay, VCO gain, timing-component tolerance, and temperature drift can all affect lock behavior. Avoid placing high-current switching loops near the source-follower and VCO control nodes, and provide a low-impedance return path.
زانیاری پابەندبوون
The available product records do not explicitly state the RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status of CD4046BCM. Current manufacturer documentation should be consulted for the exact ordering code.