CD4046BCN - 1.6MHz Micropower Phase-Locked Loop | onsemi
MPN: CD4046BCN ✓ چالاکCD4046BCN گشتی
A phase-locked loop is a feedback-control circuit that compares an input signal with a reference signal and adjusts a controllable oscillator until their phase relationship is locked. The CD4046BCN belongs to the PLL and clock-generation hierarchy: its internal VCO provides the adjustable timing element, while its phase comparators produce error information for the feedback loop. The source follower and zener diode support signal conditioning and voltage-reference functions within the PLL architecture.
The principal characteristics include micropower operation, a linear voltage-controlled oscillator, two phase-comparator sections, and a 1.6 MHz upper frequency stated for the CD4046BCN. The common comparator and signal inputs allow each phase comparator to be evaluated against the same reference and input nodes. This integration is useful when a circuit requires adjustable frequency generation and closed-loop phase synchronization without implementing those functions from discrete blocks.
Technically, the CD4046BCN is designed around CMOS-compatible phase-locked-loop functions. Its VCO can be controlled by an external voltage, while the phase-comparator outputs support implementation of a closed feedback loop. The two comparator arrangements can be selected according to the required input signal level and phase-detection behavior. Because exact voltage limits, timing characteristics, and output-drive details are defined by the manufacturer datasheet, those values should be confirmed against the operating conditions of the final design.
Typical applications include FM and AM signal generation, frequency synthesis, tone generation, frequency multiplication, frequency division, and phase-locked frequency multiplication. The PLL can also be used in communication equipment, modulation circuits, timing systems, measurement instruments, and control systems where a stable adjustable frequency is required. The 16-pin through-hole DIP package is particularly convenient for prototyping, laboratory instruments, and legacy industrial equipment.
When designing with the CD4046BCN, follow the manufacturer pin-description table when assigning signals and place the loop-filter components close to their associated pins. Verify the VCO control-voltage range, required external components, and maximum operating frequency against the final frequency plan. Use the manufacturer datasheet as the controlling reference for supply voltage, input coupling, output behavior, and operating-temperature limits.
This product page combines the verified device description with application guidance, packaging information, and engineering-oriented selection context. It helps engineers identify where the micropower PLL belongs in a clock-generation or modulation design while directing detailed electrical validation to the manufacturer datasheet.
جێگرەوەکانی جێگۆڕکێ بۆ CD4046BCN — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
MC14046B
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
HEC4046B
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
HEF4046B
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
CD4046BCN تایبەتمەندییەکان
| Product Type | Micropower phase-locked loop (PLL) |
| Maximum Stated Frequency | 1.6 MHz |
| Architecture | Linear voltage-controlled oscillator with two phase comparators |
| Voltage-Controlled Oscillator | Low-power linear VCO |
| Phase Comparator Count | 2 |
| Source Follower | Included |
| Zener Diode | Included |
| Comparator Input | Common to both phase comparators |
| Signal Input | Common to both phase comparators |
| Signal Input Coupling | Direct coupling or capacitive coupling |
| پاکێج | 16-DIP (0.300 in, 7.62 mm pitch) |
| جۆری دامەزراندن | Through-hole |
ڕێنمایی ڕێکخستنی پینی CD4046BCN 16-dip (0.300 in, 7.62 mm pitch)
ڕێکخستنی پین بۆ CD4046BCN (پاکێجی 16-dip (0.300 in, 7.62 mm pitch)). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ CD4046BCN.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
CD4046BCN گونجاوە بۆ 6 بەکارھێنانs: FM Signal Generation, Frequency Synthesis, Tone Generation, Frequency Multiplication, Frequency Division, Phase-Locked Modulation.
FM Signal Generation
The CD4046BCN fits FM signal generation because its internal low-power linear voltage-controlled oscillator can be controlled by a modulating signal while the phase-comparator section supports closed-loop frequency control. The device operates up to the stated 1.6 MHz ceiling, allowing the design to target modulation within that documented range. The source follower can provide a buffered control or signal path, while the two comparator options allow the loop architecture to be selected according to the available input signal and required capture behavior. In implementation, the modulating source drives the VCO control input, and the PLL feedback network returns phase-error information to stabilize the relationship between the reference and output. Component values and loop bandwidth should be calculated from the manufacturer characteristic information rather than copied from an unrelated PLL design.
Frequency Synthesis
The CD4046BCN is suitable for a basic frequency-synthesis loop because it combines a voltage-controlled oscillator with two phase comparators in one integrated circuit. A reference signal can be compared with a divided or otherwise conditioned feedback signal, allowing the VCO output to settle at the intended frequency. The documented 1.6 MHz maximum makes the device relevant to low- and mid-frequency synthesis stages, particularly in laboratory instruments and legacy industrial controllers. Practical design work should include loop-gain calculations, filter selection, capture-range verification, and a check of output-jitter requirements. Because the two comparators use common signal and comparator inputs, the manufacturer pinout and comparator descriptions must guide the connection of the loop and filter network.
Tone Generation
The CD4046BCN can generate a controllable audio-range tone by setting its voltage-controlled oscillator to the desired operating point and allowing the oscillator to free-run when closed-loop reference input is not required. The low-power linear VCO provides voltage-to-frequency adjustment, and the integrated source follower offers a buffered path within the device architecture. This arrangement is useful in test equipment, tone generators, signaling circuits, and simple industrial test fixtures. The design should define the acceptable frequency tolerance, output amplitude, distortion, and start-up behavior, then select external timing components using the manufacturer guidance. The 1.6 MHz device-level frequency rating leaves substantial headroom for many audio applications while allowing one IC to cover higher-frequency test tones.
Frequency Multiplication
The phase-locked-loop architecture of the CD4046BCN supports frequency multiplication by arranging the feedback path so that the phase comparator compares the reference with a divided representation of the VCO output. Once the loop locks, the oscillator can run at an integer multiple of the reference frequency. This approach is useful for clock generation, communication test equipment, and compact frequency-generation subsystems where a stable reference is available. Engineering checks include maximum VCO operating frequency, comparator capture range, loop stability, output filtering, and startup acquisition. The two internal phase comparators can serve different detection arrangements, but their actual input and output constraints must be read from the manufacturer datasheet before choosing the mode and calculating the loop filter.
Frequency Division
The CD4046BCN can participate in a frequency-divider circuit when a counter is inserted in the PLL feedback path. The internal phase comparator then compares the input reference with the divided feedback signal and adjusts the VCO until the loop reaches the intended relationship. This arrangement is applicable to programmable dividers, clock-generation blocks, and laboratory frequency standards. The 16-pin DIP package is convenient for through-hole prototyping and repair of legacy equipment. Design verification should account for divider toggle frequency, VCO pull-in range, loop bandwidth, and output-jitter behavior. Because the CD4046BCN itself does not include a binary counter, the external counter must be selected and interfaced separately rather than treated as an internal function of the PLL.
Phase-Locked Modulation
The CD4046BCN is applicable to phase-locked modulation systems where a stable phase relationship between an input and an internally generated carrier is required. Its low-power linear VCO supplies the adjustable carrier, while the phase comparators detect errors that can be filtered and returned to the oscillator control path. This architecture supports frequency modulation, phase modulation, and related feedback-controlled waveform systems. Practical implementation requires careful separation of the signal input, common comparator input, and feedback network, with component values selected using the manufacturer’s recommended configurations. The stated 1.6 MHz upper frequency provides a clear design ceiling, and the 16-pin DIP format favors serviceable industrial, laboratory, and educational equipment rather than compact leadless assemblies.
داتای سەرچاوەی ئەندازیاری بۆ CD4046BCN — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە |
|---|---|
| Brand | onsemi |
| Package | 16-DIP (0.300 in, 7.62 mm pitch) |
| Product Type | Micropower phase-locked loop |
| Maximum Stated Frequency | 1.6 MHz |
| VCO Architecture | Low-power linear voltage-controlled oscillator |
| Phase Comparator Count | 2 |
| Source Follower | Included |
| Zener Diode | Included |
| Mounting Type | Through-hole |
تێبینییەکانی دیزاین
Use the manufacturer pin-description table to assign the VCO, comparator, source-follower, and zener functions before laying out the PCB. Keep the VCO timing components and phase-comparator filter network close to their associated pins, while separating the feedback path from noisy switching nodes and high-current return paths. The 16-DIP footprint provides generous routing space, but signal-return continuity remains important because the PLL compares phase rather than merely amplifying frequency.
Do not treat the 1.6 MHz rating as proof that every PLL configuration will lock at that frequency. Confirm the selected comparator mode, input-signal range, VCO control range, feedback ratio, and external-component values in the manufacturer datasheet. Also avoid treating the source follower and zener as interchangeable functional blocks; each has a defined role in the internal circuit, and misidentifying a pin can prevent lock or produce incorrect output behavior.
Determine the supply-voltage and power-dissipation requirements from the manufacturer operating information before adding analog or digital loads. Decoupling should be placed close to the supply pins using capacitor types and values recommended by the manufacturer. For battery-powered or portable use, evaluate both the VCO’s quiescent demand and the additional current required by the feedback network, because the loop divider or external counter can dominate total power consumption.
زانیاری پابەندبوون
The accessible manufacturer and distributor records establish the device function, frequency, and package but do not state the requested substance-compliance declarations.