CD4518BFX - Dual BCD Up Counter, 3-18V | Texas Instruments
MPN: CD4518BFX ✓ چالاکCD4518BFX گشتی
A CMOS BCD counter is a synchronous digital logic device that advances a four-bit count in decimal steps from 0 through 9. The CD4518B belongs to the CD4000B family, combining CMOS logic, counter, divider, and power-management IC characteristics. Its decade-counting structure is useful when a system needs a numerical display, event count, timing interval, or frequency division with one decimal digit per counter section.
The CD4518BFX provides two interchangeable clock inputs and two clock-enable inputs, allowing each counter to use positive-edge or negative-edge triggering as required by its surrounding logic. According to the Texas Instruments CD4518B product page and datasheet, medium-speed operation reaches 6 MHz typically at a 10 V supply. Synchronous carry propagation helps multiple decimal positions change consistently, while the maximum input current of 1 µA at 18 V supports low-power operation.
Internally, the device uses CMOS counter stages to implement two independent BCD counting channels. The operating range of 3 V to 18 V covers legacy 5 V, 10 V, and 15 V logic systems. Its broad -55 °C to +125 °C temperature range supports industrial and instrumentation environments where operating conditions exceed typical commercial logic limits. The CDIP-16 package is intended for through-hole assembly and provides a robust mechanical form for legacy industrial boards.
Typical applications include decade counters for panel meters and digital displays, event-counting modules for industrial equipment, programmable timing dividers, laboratory frequency counters, and sequencing logic for test systems. Two counting sections can be used independently, cascaded for additional decimal digits, or coordinated to count different external events within one package.
When designing around the CD4518BFX, use the manufacturer pin-description table when assigning PCB tracks and preserve the specified supply decoupling arrangement. The CDIP-16 footprint is electrically compatible with standard 16-pin dual-in-line implementations, but ceramic and plastic temperature grades should be checked before using the part in a new design.
This page combines the Texas Instruments CD4518B technical description with package, pinout, comparison, sourcing, and design guidance. It also highlights verified drop-in options for boards that require the CDIP-16 footprint while clarifying the functional and temperature-grade trade-offs among them.
جێگرەوەکانی جێگۆڕکێ بۆ CD4518BFX — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ CD4518BFX (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Logic Family, Clock Edge Selection, Carry Propagation, Maximum Input Current, Operating Temperature Range.
CD4518BE
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →CD4518BD
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
CD4518BF3
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →CD4518BE
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →CD4518BFX زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | CMOS dual BCD up-counter |
| Supply Voltage Range | 3 V to 18 V |
| Typical Clock Frequency | 6 MHz at 10 V |
| Counter Configuration | 2 independent 4-bit BCD counters |
| Clock Edge Selection | Positive or negative edge |
| Carry Propagation | Synchronous internal propagation |
| Maximum Input Current | 1 µA at 18 V |
| Quiescent Current Test Condition | 100% tested at 20 V |
| مەودای پلەی گەرمیی کارکردن | -55 °C to +125 °C |
| پاکێج | CDIP-16 |
| ژمارەی پین | 16 pins |
| جۆری دامەزراندن | Through-hole |
| Logic Family | CD4000B CMOS |
| Counting Direction | Up |
| Number Format | 4-bit binary-coded decimal |
| Clock Inputs | 2 interchangeable inputs |
| Clock Enable Inputs | 2 |
| دۆخی RoHS | unknown |
| REACH Status | unknown |
ڕێکخستنی پینی CD4518BFX
| پین 1 | CLOCK1 — Clock input for the first counter section |
| پین 2 | CLOCK2 — Clock input for the second counter section |
| پین 3 | Q1A — Least-significant BCD output of the first counter |
| پین 4 | Q2A — Second BCD output of the first counter |
| پین 5 | Q3A — Third BCD output of the first counter |
| پین 6 | Q4A — Most-significant BCD output of the first counter |
| پین 7 | CE1 — Clock-enable input for the first counter |
| پین 8 | VSS — Ground reference |
| پین 9 | CE2 — Clock-enable input for the second counter |
| پین 10 | Q4B — Most-significant BCD output of the second counter |
| پین 11 | Q3B — Third BCD output of the second counter |
| پین 12 | Q2B — Second BCD output of the second counter |
| پین 13 | Q1B — Least-significant BCD output of the second counter |
| پین 14 | CARRY — CARRY output connection |
| پین 15 | RESET — Common counter reset input |
| پین 16 | VDD — Positive supply voltage |
بەکارهێنانە باوەکان
CD4518BFX گونجاوە بۆ 6 بەکارھێنانs: Industrial Event Counter, Digital Panel Meter Driver, Frequency Divider and Timer, Laboratory Frequency Counter, Sequencing and Batch Control, Test and Measurement Automation.
Industrial Event Counter
The CD4518BFX is suitable for counting discrete industrial events such as product cycles, sensor pulses, or completed machine operations. Its two independent BCD counting sections can track different event sources while operating from 3 V to 18 V and across a -55 °C to +125 °C range. Each section advances from 0 to 9 for decade counting, and the 6 MHz typical clock rate at 10 V provides ample timing margin for many pulse sources. The CDIP-16 through-hole package also suits legacy industrial control boards that use socketed or manually inserted logic devices.
پێشنیارکراو
Digital Panel Meter Driver
The CD4518BFX can provide the decade-counting stage for a digital display or panel-meter subsystem. Two independent counters can drive separate decimal positions, and cascaded operation can extend the count when a complete display requires more than two digits. Its BCD outputs align naturally with decimal display decoding, while the selectable clock edges allow the counter to follow different pulse polarities. The 3 V to 18 V supply range supports legacy display electronics, and the broad temperature specification suits industrial instrumentation.
پێشنیارکراو
Frequency Divider and Timer
The CD4518BFX is useful as a programmable divider when a stable input pulse must be reduced into a lower periodic event. Each BCD counter section provides a decade ratio, and the two sections can be arranged to derive additional division or timing relationships. At a 10 V supply, the published typical clock frequency is 6 MHz, allowing the device to divide signals well below that rate. For battery-powered timing systems, the CMOS implementation and low maximum input current of 1 µA at 18 V help limit static overhead, although dynamic power still depends on clock activity.
پێشنیارکراو
Laboratory Frequency Counter
The two counting channels in the CD4518BFX can be used to divide and count low-frequency events in a laboratory timing system. A counter section can accumulate input pulses while another establishes a timing interval, enabling repeatable period or event measurements. The device's selectable positive- or negative-edge triggering makes it adaptable to different probe conditioning circuits. Its CDIP-16 format is particularly appropriate for legacy test equipment, while its -55 °C to +125 °C range supports use across demanding industrial and laboratory environments.
پێشنیارکراو
Sequencing and Batch Control
The CD4518BFX can implement legacy sequencing logic by counting successive machine commands or product-handling steps. Two counter sections allow one channel to track the current sequence position while the other records completed cycles or batch events. Positive- or negative-edge operation provides flexibility when interfacing with legacy mechanical switches, relay circuits, or sensor-conditioning stages. The through-hole CDIP-16 package is appropriate for control boards assembled with socketed logic, and the wide supply range supports both 5 V and higher-voltage CMOS implementations.
پێشنیارکراو
Test and Measurement Automation
The CD4518BFX can count test cycles, channel selections, or stimulus events in automated measurement equipment. Two independent BCD counters reduce the number of separate counter packages needed when the tester must maintain two event totals. Because the counter is synchronous and supports selectable triggering edges, it can follow conditioned timing signals from older instrumentation. Its operating range of 3 V to 18 V and -55 °C to +125 °C rating accommodate supply voltages and environmental conditions commonly encountered in dedicated test systems.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ CD4518BFX — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | CD4518BE | CD4518BD | CD4518BF | CD4518 |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | onsemi |
| Package | CDIP-16 | CDIP-16 | CDIP-16 | CDIP-16 | CDIP-16 |
| Counter Function | Dual 4-bit BCD up-counter | Dual 4-bit BCD up-counter | Dual 4-bit BCD up-counter | Dual 4-bit BCD up-counter | CD4518-series CMOS counter |
| Logic Family | CD4000B CMOS | CD4000B CMOS | CD4000B CMOS | CD4000B CMOS | CMOS |
| Mounting Type | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole |
جیاکەرەوە سەرەکییەکان
- Exact CD4518-family counter function in the legacy CDIP-16 footprint (بەراورد بەCD4518BE)
- Hermetic X-package construction with a -55 °C to +125 °C operating range (بەراورد بەCD4518BE)
- Broad supply compatibility (بەراورد بەCD4518)
تێبینییەکانی دیزاین
Use the manufacturer pin-description table to assign the two clock inputs, clock-enable inputs, BCD outputs, carry connection, reset, VDD, and VSS. Place the VDD bypass capacitor adjacent to pin 16 and connect pin 8 to the board ground plane with a short return path. Because the counter can respond to either clock edge, route clock and enable nets away from switching nodes to prevent unintended increments.
Do not substitute SOIC, TSSOP, or other small-outline versions on a board designed for CD4518BFX without changing the footprint. The relevant alternatives in this comparison use a 16-pin dual-in-line package, while several CD4518-family order codes also exist in small-outline packages. Verify pin count, row spacing, notch orientation, and the physical dimensions before approving any alternate suffix.
Keep clock, carry, and reset traces short and provide a quiet return path, particularly when the counter is driven by mechanical contacts or long wires. Contact bounce can create several apparent clock edges even though the CD4518BFX supports positive- or negative-edge triggering. Use suitable signal conditioning or debouncing ahead of the clock input and avoid routing these inputs beside motor, relay, or high-current switching traces.
Decouple the supply at the device and include adequate bulk capacitance for any nearby relay or switching load. The published 6 MHz clock value is typical at 10 V and does not represent a guaranteed rate at every supply voltage. Confirm the required frequency and output timing margin from the manufacturer timing characteristics before treating the counter as a precision time-base element.
زانیاری پابەندبوون
No exact-orderable-variant RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified for CD4518BFX in the cited manufacturer and distributor pages. The device is a legacy industrial logic IC and is not presented as an AEC-Q100-qualified automotive part.