CY7C65211A-24LTXI - USB Serial Bridge | Infineon
MPN: CY7C65211A-24LTXI ✓ چالاکCY7C65211A-24LTXI گشتی
A USB-serial bridge is an interface IC that allows a host computer to communicate with a peripheral that uses a serial protocol instead of USB. In the broader device hierarchy, the CY7C65211A belongs to the USB interface controller family, bridges USB connectivity with UART, I2C, and SPI peripheral buses, and serves as a connectivity IC within a larger embedded system. Its combination of interfaces reduces the number of separate USB-to-serial adapters required in compact control equipment.
The principal features include full-speed USB operation, 12 Mbps USB throughput, support for three common serial peripheral interfaces, CAPSENSE integration, and USB battery-charging functionality. UART support is useful for legacy serial peripherals, while I2C and SPI support accommodates sensors, memories, displays, and other digital peripherals. CAPSENSE enables touch or proximity-style sensing functions to be consolidated into the same controller-based design.
The CY7C65211 and CY7C65211A family uses a USB-to-serial bridge architecture intended for seamless personal-computer connectivity. The 24-QFN package supports compact surface-mount layouts, while the exposed-pad construction provides a thermal and electrical land pattern consistent with the 4x4 mm outline. Exact pin assignments, clock requirements, transceiver details, and operating-temperature limits should be confirmed from the pin-description and electrical-characteristics tables in the manufacturer datasheet.
Typical applications include USB-to-UART configuration and debug interfaces, multi-protocol sensor adapters, programmable keypad and user-interface controllers, industrial service ports, battery-charging peripherals, and compact consumer accessories. A system using the integrated CAPSENSE capability can combine data communication and touch detection without allocating a separate controller for each function.
Designers should confirm the configured USB bus-speed mode, supported peripheral protocol features, clock source, and power sequencing before committing the PCB layout. Place decoupling capacitors close to the supply pins, route USB D+ and D- as a controlled differential pair, and follow the package land pattern and exposed-pad thermal guidance in the manufacturer datasheet. Firmware and external pull-up requirements should also be checked for the selected USB connection mode.
This product page consolidates manufacturer and distributor information, a same-package replacement candidate, protocol-specific application guidance, comparison fields, and practical PCB considerations into one engineering-focused reference for USB interface designs.
جێگرەوەکانی جێگۆڕکێ بۆ CY7C65211A-24LTXI — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ CY7C65211A-24LTXI (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Mounting Type, CAPSENSE Support, Device Type, Serial Interfaces, USB Standard.
CY7C65211-24LTXI
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →CY7C65211A-24LTXI تایبەتمەندییەکان
| Device Type | Full-speed USB-to-serial single-channel bridge controller |
| USB Standard | USB 2.0 full-speed |
| Maximum USB Data Rate | 12 Mbps |
| Serial Interfaces | UART, I2C, and SPI |
| ڤۆڵتاژی دابینکردنی کارکردن | 1.8 V or 3.3 V |
| CAPSENSE Support | Integrated CAPSENSE |
| Battery Charging Compliance | USB Battery Charging Device specification revision 1.2 |
| پاکێج | 24-QFN (4x4 mm) |
| جۆری دامەزراندن | Surface mount |
| Shipping Format | Tray |
| Number of USB Channels | 1 |
| Number of Serial Channels | 1 |
ڕێنمایی ڕێکخستنی پینی CY7C65211A-24LTXI 24-qfn (4x4 mm)
ڕێکخستنی پین بۆ CY7C65211A-24LTXI (پاکێجی 24-qfn (4x4 mm)). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ CY7C65211A-24LTXI.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
CY7C65211A-24LTXI گونجاوە بۆ 6 بەکارھێنانs: USB-to-UART Configuration Interface, Multi-Protocol Sensor Adapter, CAPSENSE Touch User Interface, Industrial Service and Debug Port, USB Battery-Charging Accessory, Compact Programmable Peripheral Hub.
USB-to-UART Configuration Interface
The CY7C65211A-24LTXI is appropriate for configuration ports that expose a UART peripheral to a USB host. Its full-speed USB 2.0 interface operates up to 12 Mbps, while the integrated UART bridge removes the need for a separate USB-to-serial converter. According to the Infineon manufacturer datasheet, the controller supports the UART peripheral interface alongside I2C and SPI. Designers should match the device logic voltage to the peripheral, confirm supported baud-rate and framing options, and document the host protocol so firmware can enumerate the bridge consistently.
پێشنیارکراو
Multi-Protocol Sensor Adapter
The CY7C65211A-24LTXI can bridge a USB host to sensors that use either I2C or SPI, making it useful in configurable measurement and monitoring equipment. The Infineon manufacturer datasheet identifies UART, I2C, and SPI as supported peripheral interfaces, while the 12 Mbps USB 2.0 link provides a direct personal-computer connection. Because one serial channel is available, the design must select a protocol and address or chip-select strategy that prevents conflicts. Pull-up values, clocking, and peripheral voltage levels should be verified against each sensor's requirements.
پێشنیارکراو
CAPSENSE Touch User Interface
Integrated CAPSENSE makes the CY7C65211A-24LTXI useful in USB-controlled keypads, touch panels, and appliance interfaces where communication and human input share one controller. The Infineon manufacturer datasheet confirms both USB-serial bridging and CAPSENSE in the same device. Consolidating these functions can reduce board area, but the PCB must preserve the sensor electrode geometry, grounding, and shielding required by the CAPSENSE design guidance. Firmware must also coordinate touch scanning with the selected UART, I2C, or SPI peripheral traffic.
پێشنیارکراو
Industrial Service and Debug Port
A CY7C65211A-24LTXI-based service port provides a modern USB connection for equipment that retains a serial configuration or debug interface. Its full-speed USB 2.0 operation at 12 Mbps is suitable for control commands, status transfers, firmware updates, and configuration data, while UART provides compatibility with established service hardware. According to the Infineon manufacturer datasheet, the controller also offers I2C and SPI for broader internal connectivity. Industrial implementations should account for ESD protection, cable length, grounding, and the electrical standard used by the attached service connector.
پێشنیارکراو
USB Battery-Charging Accessory
The CY7C65211A-24LTXI is suited to USB accessories that need data connectivity alongside battery-charging behavior. According to the Infineon manufacturer datasheet, the device is USB Battery Charging Device compliant with specification revision 1.2 and operates as a full-speed USB device. The product designer must verify charging-current limits, source and sink roles, data-line states during charging, and system protections against faults. UART, I2C, or SPI can then connect the controller to a battery-management circuit, status display, or configuration memory.
پێشنیارکراو
Compact Programmable Peripheral Hub
The CY7C65211A-24LTXI can act as the USB-facing controller in a compact programmable peripheral that exposes internal UART, I2C, or SPI devices to a host computer. The Infineon manufacturer datasheet identifies the device as a single-channel USB-serial bridge with all three peripheral interfaces, permitting one controller to adapt a product platform as its external bus changes. Because only one serial channel is present, firmware must manage protocol selection or multiplexing carefully. The 24-QFN footprint also supports compact industrial and consumer assemblies when the exposed pad and layout requirements are respected.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ CY7C65211A-24LTXI — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | CY7C65211-24LTXI |
|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies |
| Package | 24-QFN (4x4 mm) | 24-QFN (4x4 mm) |
| USB Standard | USB 2.0 full-speed | USB 2.0 full-speed |
| Maximum USB Data Rate | 12 Mbps | 12 Mbps |
| Serial Interfaces | UART, I2C, and SPI | UART, I2C, and SPI family support |
جیاکەرەوە سەرەکییەکان
- Combines three serial peripheral interfaces with full-speed USB (بەراورد بەCY7C65211-24LTXI)
- Integrated CAPSENSE reduces separate touch-controller overhead (بەراورد بەCY7C65211-24LTXI)
- Supports battery-charging-aware USB accessories (بەراورد بەCY7C65211-24LTXI)
تێبینییەکانی دیزاین
Use the manufacturer land pattern for the 24-QFN, 4x4 mm package and follow its exposed-pad guidance. Place required input and output decoupling capacitors close to their associated supply pins, and provide a low-impedance ground connection to the exposed pad. Confirm whether the pad connects to ground, a supply rail, or another potential in the electrical tables before finalizing copper and via placement.
Route USB D+ and D- as a short, continuous differential pair with a controlled impedance and avoid interrupting the pair with test pads or unrelated routing. Position USB-signal protection components close to the connector while keeping them symmetric on the two conductors. The Infineon application guidance should be used to determine whether series resistors, shunt capacitance, or a common-mode choke is required.
Do not assume that every member of the CY7C65211 and CY7C65211A family has identical peripheral and CAPSENSE behavior. Check the device-specific ordering table, firmware identifiers, supported protocol features, and pin multiplexing before replacing CY7C65211A-24LTXI. Also verify the operating supply level and USB attach behavior against the intended host and peripheral system.
زانیاری پابەندبوون
The manufacturer datasheet states USB Battery Charging Device specification revision 1.2 compliance. Separate RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not established from the referenced product information.