Infineon

CY7C65620-56LFXCT - 2-Port USB 2.0 Hub Controller | Infineon

MPN: CY7C65620-56LFXCT ✓ چالاک
3.45 V Vdss Integrated Rds(on) 56-pin QFN, 8 mm x 8 mm Package 24 MHz external crystal Speed Supported Memory
MOQ: 1 |

CY7C65620-56LFXCT گشتی

The Infineon Technologies CY7C65620-56LFXCT is a low-power USB 2.0 hub controller in a 56-pin QFN package measuring 8 mm by 8 mm. It provides two downstream USB ports, 480 Mbps full-speed and low-speed operation, and an integrated 24 MHz PLL that works with an external crystal. Integrated upstream and downstream termination resistors reduce external component count and simplify USB board layout.

A USB hub controller is a system-on-chip that connects one host USB interface to multiple downstream peripherals while handling port enumeration, signaling, power management, and status indication. In the product hierarchy, this device is a USB interface IC, a USB hub controller, and ultimately a connectivity semiconductor for personal computers, peripherals, docking systems, industrial equipment, and embedded USB hosts.

Key features include two USB 2.0 ports, integrated upstream and downstream termination resistors, configurable port status indicator control, and in-system EEPROM programming. The controller can also use an external SPI EEPROM for configurable USB descriptor data such as vendor ID and product information. A 24 MHz external crystal with an integrated PLL supplies the internal timing reference required for reliable USB data transfer.

The CY7C65620 belongs to the CY7C656xx low-power hub controller family, which operates from a 3.45 V supply and supports USB data rates up to 480 Mbps. Its 56-pin QFN-56 construction is intended for compact, high-density PCB assemblies. The 8 mm by 8 mm footprint requires careful escape-routing of USB differential pairs and controlled layout around the crystal, supply, and termination networks.

Typical applications include two-port USB hubs, desktop and notebook peripherals, printer or scanner adapters, external storage enclosures, industrial USB distribution panels, and embedded host systems that need one upstream port and two downstream ports. Configuration flexibility through GPIO-controlled status indicators and programmable USB descriptors supports product-specific behavior without redesigning the hub controller.

When laying out the board, route the upstream and downstream USB pairs as controlled-impedance, differentially coupled traces with no stubs or test pads in the pairs. Place the 24 MHz crystal close to its assigned pins and keep the crystal loop compact. Verify the hub enumeration, suspend, over-current, and downstream-port disable behavior in the final system because firmware and descriptor configuration determine much of the user-visible behavior.

جێگرەوەکانی جێگۆڕکێ بۆ CY7C65620-56LFXCT — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ CY7C65620-56LFXCT (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Product Type, Package, Downstream Termination, EEPROM Support, Package Dimensions.

Infineon
Product Type: USB Hub Controller
Package: 56-QFN (8 x 8 mm)
Downstream Termination: Integrated termination resistor
بەراوردکردن لەگەڵ CY7C65620-56LFXCT →
Infineon
Product Type: 2-port Single-TT USB 2.0 hub controller
Package: 56-QFN, 8 x 8 mm
EEPROM Support: Supported EEPROM interface
بەراوردکردن لەگەڵ CY7C65620-56LFXCT →
Infineon
EEPROM Support: Supported
Package Dimensions: 8 mm x 8 mm
بەراوردکردن لەگەڵ CY7C65620-56LFXCT →
Infineon
Downstream Termination: Integrated 15 kΩ pull-down resistors
Package Dimensions: 8 mm × 8 mm
بەراوردکردن لەگەڵ CY7C65620-56LFXCT →

CY7C65620-56LTXC

✅ جێگرەوەی ڕاستەوخۆ
Infineon
📦 56-pin QFN, 8 mm x 8 mm
2-port Single-TT USB 2.0 hub controller · 2 ports · USB 2.0 · 480 Mbps · 3.45 V · 3.3 V · 56-QFN, 8 x 8 mm · Sawn-type QFN

پەیوەندی بۆ نرخ

بینینی داتاشیت →

CY7C65620-56LTXCT

✅ جێگرەوەی ڕاستەوخۆ
Infineon
📦 56-pin QFN, 8 mm x 8 mm
USB 2.0 hub controller · 2 ports · Single-TT · USB 2.0 · Supported · Supported · Supported · 56-pin QFN

پەیوەندی بۆ نرخ

بینینی داتاشیت →

CY7C65620-56LTXI

✅ جێگرەوەی ڕاستەوخۆ
Infineon
📦 56-pin QFN, 8 mm x 8 mm
USB 2.0 hub controller · EZ-USB HX2LP · USB 2.0 · 2 ports · Full-Speed and High-Speed · 480 Mbps · 3.3 V · 2-port Single-TT

پەیوەندی بۆ نرخ

بینینی داتاشیت →

CY7C65640A-LFXC

✅ جێگرەوەی ڕاستەوخۆ
Infineon
📦 56-pin QFN
USB 2.0 four-port high-speed USB hub controller · USB 2.0 · 4 ports · 56-QFN · 8 mm × 8 mm · Surface mount · USB interface IC · Hub controller

پەیوەندی بۆ نرخ

بینینی داتاشیت →

CY7C65620-56LFXCT تایبەتمەندییەکان

Product Type USB 2.0 hub controller
Number of USB Ports 2 ports
USB Version USB 2.0
Maximum USB Data Rate 480 Mbps
ڤۆڵتاژی دابینکردنی کارکردن 3.45 V
پاکێج 56-pin QFN, 8 mm x 8 mm
جۆری دامەزراندن Surface mount
Clock Requirement 24 MHz external crystal
PLL Integrated
Upstream Termination Resistors Integrated
Downstream Termination Resistors Integrated
Port Status Indicator Control Configurable
In-System EEPROM Programming Supported
External Descriptor EEPROM Interface SPI EEPROM configurable for vendor ID and product information
Hub Configuration Configurable with GPIOs, LED indicator, and EEPROM
Power Class Low-power USB 2.0 hub controller

ڕێنمایی ڕێکخستنی پینی CY7C65620-56LFXCT 56-pin qfn, 8 mm x 8 mm

ڕێکخستنی پین بۆ CY7C65620-56LFXCT (پاکێجی 56-pin qfn, 8 mm x 8 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی 56-pin qfn, 8 mm x 8 mm بۆ CY7C65620-56LFXCT

هیچ داتای وردی پینئاوت بەردەست نییە بۆ CY7C65620-56LFXCT.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

CY7C65620-56LFXCT گونجاوە بۆ 6 بەکارھێنانs: Two-Port Desktop USB Hub, Printer and Scanner Adapter, External Storage and Dongle Dock, Industrial USB Distribution Panel, Embedded Host USB Expansion, Kiosk and POS Perimeter Hub.

🖥️

Two-Port Desktop USB Hub

The CY7C65620-56LFXCT fits a compact desktop hub that connects two USB peripherals to one host port. Its two downstream ports operate on the USB 2.0 architecture at rates up to 480 Mbps, while integrated upstream and downstream termination resistors reduce the external matching network. The 56-pin QFN package measures 8 mm by 8 mm, allowing the hub to fit beside the host connector without creating a bulky external module. GPIO-controlled status indicators can report link, activity, or over-current conditions, while SPI EEPROM configuration permits product-specific vendor and product identifiers.

🖨️

Printer and Scanner Adapter

The CY7C65620-56LFXCT is suitable for a dual-purpose printer or scanner adapter that exposes legacy or compact USB devices through a modern host connection. Two downstream ports provide useful flexibility for a combined printer and scanner, status scanner, or card reader. Integrated termination resistors and an integrated PLL support a compact layout, while the external 24 MHz crystal reference gives the USB interface a dedicated timing source. The controller's programmable descriptor capability allows the adapter to present manufacturer-specific product information to the host.

💾

External Storage and Dongle Dock

The CY7C65620-56LFXCT can manage two downstream USB storage or security-dongle connections in an external docking product. Its low-power USB 2.0 controller design avoids the bulk of a discrete host interface implementation while retaining two-port enumeration and status control. The 8 mm by 8 mm QFN-56 body supports compact enclosures, and the SPI EEPROM option lets a single PCB be configured with different USB product identities for different dock models. Firmware must handle suspend, resume, and per-port over-current behavior.

🏭

Industrial USB Distribution Panel

The CY7C65620-56LFXCT fits industrial USB distribution panels that provide two protected downstream connections from one host port. The integrated termination resistors help simplify each port's analog implementation, while configurable GPIO outputs can drive per-port LEDs, relay enable signals, or fault indicators. The controller's 3.45 V operating supply and low-power architecture are appropriate for embedded equipment operating continuously. Designers should verify downstream current limits, protection devices, and isolation requirements for the industrial environment.

🧩

Embedded Host USB Expansion

The CY7C65620-56LFXCT provides a practical way for an embedded Linux or microcontroller-based system to expand one host connection into two USB peripherals. The controller handles USB hub transactions while the system processor manages enumeration policy and application data. Its two downstream ports can serve keyboards, mass-storage devices, or service interfaces. The compact 8 mm by 8 mm QFN footprint is beneficial inside embedded equipment, and the integrated PLL plus external 24 MHz crystal supports a deterministic timing design when laid out according to the reference circuit.

🏧

Kiosk and POS Perimeter Hub

The CY7C65620-56LFXCT can expand USB connectivity inside a kiosk, self-service terminal, or point-of-sale system where two controlled peripheral connections are required. Examples include a receipt printer plus a card reader, or a barcode scanner plus a payment terminal. Configurable port status outputs provide visible link and fault states without requiring separate host GPIO control. The two-port controller limits board area compared with a larger multi-port hub, and programmable USB descriptor data support product-specific enumeration and identification.

What is the CY7C65620-56LFXCT?
The CY7C65620-56LFXCT is a two-port, low-power USB 2.0 hub controller manufactured by Infineon Technologies. According to the Infineon product information, it uses a 56-pin QFN package measuring 8 mm by 8 mm and supports USB operation up to 480 Mbps. Its integrated termination resistors, configurable port indicators, programmable EEPROM support, and external 24 MHz crystal interface make it suitable for compact USB hub and peripheral products.
How many USB ports does the CY7C65620-56LFXCT support?
The CY7C65620-56LFXCT provides one upstream connection and two downstream USB 2.0 ports. Infineon describes it as a two-port single-TT hub configuration that can be configured with GPIOs, LED indicators, and EEPROM content. The two downstream ports can therefore be assigned product-specific status functions and USB descriptors rather than operating as fixed, identical ports.
What is the maximum USB data rate of the CY7C65620-56LFXCT?
The CY7C65620-56LFXCT supports a maximum USB data rate of 480 Mbps within the CY7C656xx controller family. This is the high-speed USB 2.0 theoretical signaling rate, while actual throughput depends on host behavior, device firmware, transfer types, and system overhead. The device also handles low-speed and full-speed device connections defined by USB 2.0.
What package does the CY7C65620-56LFXCT use?
The CY7C65620-56LFXCT is supplied in a 56-pin QFN package measuring 8 mm by 8 mm. Distributor listings identify the package as 56-QFN, while Infineon describes the family package as a sawn QFN. Because the QFN-56 body is compact and has short leads, production boards require careful fan-out routing and adequate exposed-pad thermal management.
Where can I download the CY7C65620-56LFXCT datasheet?
The manufacturer datasheet is available through the Infineon product page for the CY7C65620 family, with the corresponding product page at https://www.infineon.com/part/CY7C65620-56LTXC. Use the pin-description table, electrical characteristics, reference schematic, and USB routing guidance in that document when assigning signals or laying out the 8 mm by 8 mm QFN footprint.
Where can I find the CY7C65620-56LFXCT pinout?
The CY7C65620-56LFXCT pinout is defined in the manufacturer datasheet for the CY7C65620 low-power USB 2.0 hub controller family. Use the 56-pin package drawing and pin-description table to map supply, clock, USB data, GPIO, configuration, and programming signals. The component has no exposed-ground connection listed independently from its 56 package leads, so verify every net against the official pin table.
Does the CY7C65620-56LFXCT need external USB termination resistors?
The CY7C65620-56LFXCT integrates both upstream and downstream termination resistors, which reduces the external resistor count needed for USB signal conditioning. According to the Infineon family description, this integration simplifies board layout and helps control USB termination behavior. Place the crystal, supply bypass capacitors, and any optional configuration components according to the reference circuit in the manufacturer datasheet.
Can the CY7C65620-56LFXCT be programmed with an external SPI EEPROM?
Yes, the CY7C65620-56LFXCT supports configuration through an external SPI EEPROM as well as in-system EEPROM programming. The external device can hold configurable USB descriptor information, including vendor ID and product identification data. This allows a common hub controller and PCB to be programmed for different product identities without redesigning the USB interface circuit.
Is the CY7C65620-56LFXCT suitable for compact USB hub designs?
The CY7C65620-56LFXCT is well suited to compact two-port USB hub designs because it combines two downstream ports, integrated termination resistors, and an integrated PLL in an 8 mm by 8 mm QFN-56 package. Its low-power design supports battery-operated and always-on peripheral equipment. The compact package does, however, demand fine-pitch assembly and careful differential-pair routing.
Can CY7C65620-56LTXC replace the CY7C65620-56LFXCT?
The CY7C65620-56LTXC uses the same 56-pin QFN hub-controller family and is the closest listed alternative to the CY7C65620-56LFXCT. The practical differences concern the ordering suffix, temperature grade, and packaging option rather than the USB architecture. Confirm the required grade, reel configuration, and exact pin mapping in the manufacturer ordering guide before approving a substitution.
What is the difference between CY7C65620-56LFXCT and CY7C65620-56LTXCT?
Both devices are members of the same CY7C65620 two-port USB 2.0 hub controller family and use a 56-pin QFN package. The ordering codes distinguish ordering, grade, and packaging options rather than USB port count or controller architecture. Select the exact suffix that matches the required temperature grade, qualification level, and delivery format, then confirm the pin-to-pin match against the manufacturer datasheet.
When should I choose the CY7C65620-56LFXCT instead of a multi-port hub controller?
Choose the CY7C65620-56LFXCT when the product needs exactly two downstream USB 2.0 ports and a single upstream host connection. A four-port controller such as the CY7C65640A-LFXC can share the family footprint, but it adds port hardware, power-management requirements, and firmware complexity that may be unnecessary for a two-port product. Select the CY7C65620 when simplicity and lower system complexity are the priorities.
Can the CY7C65640A-LFXC replace the CY7C65620-56LFXCT?
The CY7C65640A-LFXC is a four-port USB 2.0 controller in a 56-pin QFN package, while the CY7C65620-56LFXCT provides two downstream ports. Cross-reference information identifies the packages and terminals as consistent, but the additional ports create different USB power, enumeration, and firmware requirements. Treat it as a redesign option and validate current budgets, port routing, and enumeration before using it in place of the two-port part.
What clock source does the CY7C65620-56LFXCT require?
The CY7C65620-56LFXCT requires a 24 MHz external crystal and uses an integrated PLL for internal timing. Infineon lists the 24 MHz crystal and integrated PLL as defining features of the controller family. Place the crystal close to the device, keep the connection loop short, and follow the manufacturer load-capacitor and layout guidance to avoid clock jitter that could disturb USB transmission.
Is the CY7C65620-56LFXCT currently in stock and how do I order it?
A distributor listing identifies the CY7C65620-56LFXCT as an in-stock component. Current stock levels and lead time can change quickly, so use the Request a Quote form on this page to confirm quantity, delivery schedule, and the exact suffix you need. Provide the full manufacturer part number CY7C65620-56LFXCT when requesting a quotation.

داتای سەرچاوەی ئەندازیاری بۆ CY7C65620-56LFXCT — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the CY7C65620-56LFXCT when a product requires exactly one upstream USB 2.0 connection and two downstream ports, especially where board area, power budget, and firmware complexity are constrained. Its integrated termination resistors, integrated PLL, 24 MHz crystal interface, programmable descriptors, and configurable status indicators make it a strong fit for compact hubs, adapters, docks, and embedded systems. Choose CY7C65620-56LTXC, CY7C65620-56LTXCT, or CY7C65620-56LTXI when an equivalent controller ordering option better matches the required grade, temperature class, or delivery format. Choose the CY7C65640A-LFXC only when four downstream ports justify the additional power distribution, routing, and firmware work. In every case, confirm the exact suffix, pin mapping, operating grade, and USB power budget before releasing a production order.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە CY7C65620-56LTXC CY7C65620-56LTXCT CY7C65620-56LTXI CY7C65640A-LFXC
Brand Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies
Package 56-pin QFN, 8 mm x 8 mm 56-pin QFN, 8 mm x 8 mm - same 56-pin QFN, 8 mm x 8 mm - same 56-pin QFN, 8 mm x 8 mm - same 56-pin QFN - same package family
Product Type Low-power USB 2.0 hub controller Low-power USB 2.0 hub controller Low-power USB 2.0 hub controller Low-power USB 2.0 hub controller USB 2.0 hub controller
Downstream USB Port Count 2 ports 2 ports 2 ports 2 ports 4 ports
USB Version USB 2.0 USB 2.0 USB 2.0 USB 2.0 USB 2.0
Maximum USB Data Rate 480 Mbps 480 Mbps 480 Mbps 480 Mbps 480 Mbps
Pin Compatibility 56-pin QFN reference design Same 56-pin QFN footprint Same 56-pin QFN footprint Same 56-pin QFN footprint Consistent 56-pin QFN terminals, but port functionality differs

جیاکەرەوە سەرەکییەکان

  • Two-port implementation limits system complexity (بەراورد بەCY7C65640A-LFXC)
  • Integrated USB termination networks (بەراورد بەCY7C65640A-LFXC)
  • Compact 8 mm by 8 mm footprint (بەراورد بەCY7C65620-56LTXC)
  • Programmable product identity and port indication (بەراورد بەCY7C65620-56LTXI)

تێبینییەکانی دیزاین

Route the upstream and downstream USB differential pairs as short, continuously referenced traces with no stubs, vias, or test pads in the pairs. Place the 24 MHz crystal directly beside the clock pins and keep its ground return short, following the Infineon reference layout. The 8 mm by 8 mm QFN package requires fan-out vias under the device to reach the interior pins without long traces.

Follow the manufacturer reference schematic for bypass capacitance and downstream-port power distribution. The controller operates from 3.45 V, so separate USB port supply paths from the logic rail where the reference design does so. Validate each downstream port's worst-case current draw against the hub current budget and confirm that over-current events produce the intended port-disable behavior.

Do not select a suffix only by the final letter. The LTXC, LTXCT, LTXI, and LFXCT orderings can represent differences in grade, temperature class, or delivery configuration. Compare the complete ordering table before substitution, and confirm pin assignment, crystal configuration, descriptor programming method, and reel format. Firmware should also be validated because descriptor and port-policy configuration affects enumeration.

Keep the USB traces away from switching nodes and high-current supply paths, and observe the differential impedance required by the complete board stack-up. Although upstream and downstream termination resistors are integrated, connector placement and cable or board loss still determine signal quality. Validate rise times, eye opening, and enumeration stability with the intended cables and peripheral population in system testing.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The controller is a general-purpose USB interface IC rather than an automotive-qualified product. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer or the relevant compliance documentation.

داتا پشتڕاستکراوەتەوە لە: 2026-11-04 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

CY7C65620-56LFXCT datasheet CY7C65620-56LFXCT pinout CY7C65620-56LFXCT datasheet pdf CY7C65620-56LFXCT equivalent CY7C65620-56LFXCT replacement CY7C65620-56LFXCT cross reference CY7C65620-56LFXCT price CY7C65620-56LFXCT stock Infineon CY7C65620-56LFXCT CY7C65620 QFN-56 USB hub controller CY7C65620 two port USB 2.0 hub CY7C65620-56LFXCT vs CY7C65640A-LFXC CY7C65620-56LFXCT application circuit CY7C65620-56LFXCT USB routing layout

پێکهاتە و زاراوە پەیوەندیدارەکان

Infineon Technologies CY7C65620-56LFXCT CY7C65620 CY7C65620-56LTXC CY7C65620-56LTXCT CY7C65620-56LTXI CY7C65640A-LFXC USB hub controller USB interface IC USB 2.0 High-Speed USB 480 Mbps QFN-56 8 mm by 8 mm QFN surface mount package integrated PLL 24 MHz crystal integrated termination resistors upstream USB port downstream USB port SPI EEPROM in-system EEPROM programming GPIO USB descriptor RoHS REACH
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ