CY7C65630-56LFXC - 4-Port USB 2.0 Hub Controller | Infineon
MPN: CY7C65630-56LFXC ✗ کۆتایی ژیانCY7C65630-56LFXC گشتی
A USB hub controller is an interface integrated circuit that manages the shared USB bus between a host and multiple downstream peripherals. Within the broader semiconductor hierarchy, it is a USB interface controller, then a USB interface IC, and finally an integrated circuit. The controller sits between a USB host and downstream ports, helping implement the physical and logical topology required for multi-device USB connections while reducing the host-processing burden associated with repeated device enumeration and port management.
The CY7C65630-56LFXC provides USB 2.0 compliance and four configurable hub ports. According to the manufacturer datasheet, the family also includes an automotive and industrial temperature option covering -40 C to +85 C, making it relevant to systems requiring extended-temperature operation. Its low-power designation supports use in compact embedded and portable equipment where energy efficiency and board area matter. The 56-QFN package provides a surface-mount integration option without the larger footprint of a conventional through-hole controller.
The controller is configured through general-purpose input/output resources, LED indication, and optional EEPROM support, as stated in the manufacturer product information for the related four-port device. These functions allow a designer to implement port-enable behavior, status indicators, and hub identity or configuration storage in the surrounding system. The EEPROM-dependent behavior is especially useful when equipment requires consistent enumeration after power cycles or coordinated startup with another embedded controller.
Typical uses include industrial USB aggregation, automotive passenger-compartment accessories, kiosk and point-of-sale equipment, desktop or docking systems with several low-speed peripherals, and embedded test equipment. In each case, the key benefit is centralized downstream-port control. The controller is intended for a USB 2.0 host environment; it does not increase the signaling rate of an upstream USB 2.0 link, and actual usable throughput remains constrained by the host, device classes, cable quality, and shared bus bandwidth.
Designers should verify the exact pin assignments, electrical limits, reference-design support circuitry, and USB compliance details in the manufacturer datasheet before layout release. Pay particular attention to power-supply distribution, USB data-routing geometry, ground continuity, capacitor placement, and thermal performance. The available verified source set does not provide the complete electrical characteristics table or the full 56-pin assignment, so those items must be confirmed directly from the official datasheet.
This page combines verified distributor identification, package information, lifecycle and replacement findings, drop-in alternatives, and practical implementation guidance. It also distinguishes the confirmed electrical facts from parameters that still require datasheet confirmation, providing engineers with a clearer basis for sourcing, comparison, and design review.
جێگرەوەکانی جێگۆڕکێ بۆ CY7C65630-56LFXC — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ CY7C65630-56LFXC (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Product Type, Downstream Pull-Down Resistance, Package Singulation, Package Type.
CY7C65630-56LTXC
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →CY7C65630-56LFXCT
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →CY7C65630-56LFXC تایبەتمەندییەکان
| Product Type | USB 2.0 hub controller |
| Controller Family | EZ-USB HX2LP |
| USB Specification | USB 2.0 |
| Number of Hub Ports | 4 ports |
| تۆپۆلۆژی | 4-port Single-TT |
| Nominal Operating Voltage | 3.3 V |
| پاکێج | 56-QFN (8 x 8 mm) |
| ژمارەی پین | 56 pins |
| جۆری دامەزراندن | Surface Mount |
| Industrial and Automotive Temperature Option | -40 C to +85 C |
| Configurable GPIO Functions | Supported |
| LED Indicator Functions | Supported |
| EEPROM Support | Supported |
| USB 2.0 Compliance | Compliant |
| Power Class | Low-power |
| Manufacturer | Infineon Technologies |
| Original Product | Cypress Semiconductor |
| Replacement Status | Replaced by CY7C65630-56LTXC |
ڕێنمایی ڕێکخستنی پینی CY7C65630-56LFXC 56-qfn (8 x 8 mm)
ڕێکخستنی پین بۆ CY7C65630-56LFXC (پاکێجی 56-qfn (8 x 8 mm)). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ CY7C65630-56LFXC.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
CY7C65630-56LFXC گونجاوە بۆ 6 بەکارھێنانs: Industrial USB Port Aggregation, Automotive Passenger Interface Hub, Point-of-Sale Terminal, Kiosk and Self-Service Terminal, USB Test and Measurement Fixture, Embedded USB-to-Peripheral Bridge.
Industrial USB Port Aggregation
The CY7C65630-56LFXC fits industrial equipment that must expose several USB 2.0 peripheral connections through one upstream host interface. Its four-port Single-TT hub topology and 56-QFN 8 x 8 mm package support compact embedded implementations without requiring four independent host controllers. The available industrial-grade option covers -40 C to +85 C, although the exact suffix grade must be confirmed. In practice, the controller can centralize downstream-port enable and status indication through its GPIO and LED functions. Design verification should include worst-case USB enumeration, cable-length behavior, supply droop, and thermal review.
پێشنیارکراو
Automotive Passenger Interface Hub
The CY7C65630-56LFXC is suitable for automotive interface designs requiring four downstream USB 2.0 ports from a shared host connection. Its EZ-USB HX2LP family includes an automotive and industrial option rated from -40 C to +85 C, while configurable GPIO and LED functions help implement port-status indications. The 56-QFN package limits board area in compact electronic control units. Production use requires confirmation of the exact ordering suffix, automotive qualification status, transient requirements, and the complete electrical limits from the manufacturer datasheet before release.
پێشنیارکراو
Point-of-Sale Terminal
A point-of-sale terminal can use the CY7C65630-56LFXC to consolidate keyboards, scanners, printers, card readers, and other USB 2.0 peripherals behind one upstream host connection. The four downstream ports reduce host-controller and connector-routing requirements, while GPIO-driven status functions can support device or port indication. The 3.3 V controller operates in the same general class as modern USB 2.0 embedded systems. Engineering validation should account for hot-plug enumeration, simultaneous enumeration by multiple device classes, shared-bus bandwidth, cable shielding, and connector current requirements.
پێشنیارکراو
Kiosk and Self-Service Terminal
The CY7C65630-56LFXC supports kiosk and self-service equipment that needs several USB 2.0 peripheral connections behind a single host port. Four downstream ports can serve input, authentication, printing, payment, or storage accessories, and the 56-QFN 8 x 8 mm package preserves PCB area in compact systems. GPIO and LED support can be used for controlled port activation and visual status. Because all downstream traffic shares the upstream USB 2.0 link, designers should test the complete device mix, avoid unnecessary high-bandwidth loads, and validate power and USB signal integrity under the worst expected connection set.
پێشنیارکراو
USB Test and Measurement Fixture
The CY7C65630-56LFXC can be used in a USB test fixture to provide four downstream USB 2.0 connections from one embedded host interface. This arrangement helps connect several instruments, programmable devices, or service interfaces while retaining a compact controller footprint. Configurable GPIO and LED functions can assist with port identification and fixture diagnostics. For reliable measurement results, each connected device must be characterized for bus contention, hot-plug transients, enumeration timing, and data corruption. The available source set does not provide full timing or electrical specifications, so these tests should follow the manufacturer datasheet reference conditions.
پێشنیارکراو
Embedded USB-to-Peripheral Bridge
The CY7C65630-56LFXC is appropriate for embedded systems that must fan multiple USB 2.0 peripherals out from a single embedded host interface. A compact processor board can use the controller for service connectors, configuration ports, and external accessories, with GPIO handling port enables and EEPROM supporting configuration storage where required. Its 56-QFN package is practical for high-density boards but requires careful thermal-pad and via planning. Layout review should prioritize short USB traces, continuous ground references, correct capacitance placement, and separation from noisy switching circuitry.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ CY7C65630-56LFXC — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | CY7C65630-56LTXC | CY7C65630-56LFXCT |
|---|---|---|---|
| Package | 56-QFN (8 x 8 mm) | 56-QFN (8 x 8 mm) - same package | 56-VQFN - consistent package and terminals |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| USB Version | USB 2.0 | USB 2.0 | USB 2.0 |
| Number of Ports | 4 ports | 4 ports | 4 ports |
| Manufacturer Status | Replaced by CY7C65630-56LTXC | Manufacturer-designated replacement | Current orderability not stated in verified data |
جیاکەرەوە سەرەکییەکان
- Manufacturer-confirmed replacement path (بەراورد بەCY7C65630-56LTXC)
- Four-port Single-TT implementation (بەراورد بەCY7C65630-56LFXCT)
- Configurable system integration (بەراورد بەCY7C65630-56LFXCT)
تێبینییەکانی دیزاین
Treat the USB differential pairs as controlled-impedance routed nets and follow the manufacturer's reference layout. Keep upstream and downstream routing orderly, provide a continuous ground reference, avoid stubs, and place any required input, output, and internal decoupling capacitors directly beside their associated pins. The retrieved source set does not include the recommended capacitance values, so those values must be taken from the official datasheet and reference schematic rather than estimated.
Validate the 3.3 V rail under the maximum expected USB load, hot-plug events, and worst-case downstream-device combinations. USB port-current demand is determined by the attached devices and board power architecture, so the controller's own operating specification must not be used as a substitute for the complete system budget. Review startup sequencing, inrush behavior, supply droop, and whether auxiliary power is required for the downstream ports using the manufacturer application guidance.
The 56-QFN construction requires attention to the exposed-pad soldering and thermal path. Follow the manufacturer's land pattern, paste stencil, via pattern, and reflow profile, and provide adequate copper where the board allows. A temperature-rise estimate cannot be produced from the verified data because the package thermal resistance, controller dissipation, and board construction are not supplied. Evaluate those datasheet values after the final power budget is known.
Do not treat a family member with a different port count, package singulation, or automotive suffix as interchangeable without checking the ordering table. Infineon specifically identifies CY7C65630-56LTXC as the replacement for the original device, while CY7C65620-family parts have a different port count. Also verify EEPROM, GPIO, LED, and exposed-pad connections against the exact datasheet revision because the verified source excerpts do not contain the complete 56-pin table.
زانیاری پابەندبوون
The verified source set identifies an automotive and industrial temperature option but does not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements. These fields remain unknown rather than being inferred from general manufacturer practices.