CY7C65634-28LTXCT - 2-Port USB 2.0 Hub | Infineon
MPN: CY7C65634-28LTXCT ✓ چالاکCY7C65634-28LTXCT گشتی
A USB hub controller is an interface integrated circuit that manages traffic between a USB host and one or more downstream USB devices. It belongs to the USB interface-controller family within the broader semiconductor and embedded-interface hierarchy. A single-TT hub topology separates low- and full-speed traffic from high-speed traffic, helping simplify downstream routing and reduce the performance burden placed on shared bus segments when devices of different speeds are connected.
The CY7C65634-28LTXCT provides two downstream hub ports and allows implementation choices through GPIO and EEPROM configuration. These features make the device useful where a compact board needs managed USB connectivity rather than a simple passive splitter. The exposed-pad package supports heat transfer from the controller to the PCB copper, while its compact 5 mm by 5 mm dimensions support space-conscious USB peripheral and embedded-product layouts.
The part is identified as C-grade and is associated with a commercial operating-temperature class. Infineon’s ordering information describes the CT ordering suffix as a tape-and-reel configuration. The exact pin assignments, clock requirements, transceiver characteristics, current limits, and configuration registers should be taken from the manufacturer datasheet before schematic capture or PCB layout is released.
Typical applications include compact USB hubs, personal-computer peripherals, embedded USB expansion, industrial data-acquisition equipment, USB test systems, and dual-device connectivity products. The two-port arrangement is especially useful when a system must expose two USB connectors while retaining a controlled host-to-device relationship and configurable interface behavior.
PCB implementation should preserve the exposed-pad grounding and thermal-via pattern specified by the manufacturer. USB differential routing also requires short, matched traces, controlled impedance, and careful separation from noisy power-conversion paths. Because this controller coordinates high-speed signaling, layout errors can affect enumeration, signal integrity, or interoperability even when the schematic is electrically correct.
This page consolidates the manufacturer ordering information, package characteristics, sourcing details, application guidance, and engineering considerations into a design-focused component profile. It also distinguishes exact ordering variants from functional drop-in alternatives, helping engineers make sourcing and PCB-compatibility decisions before committing a USB hub design to production.
جێگرەوەکانی جێگۆڕکێ بۆ CY7C65634-28LTXCT — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ CY7C65634-28LTXCT (هەمان شێوە و پێکهاتەی شوێن).
هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.
داوای جێگرەوەکان بکەCY7C65634-28LTXCT تایبەتمەندییەکان
| Product Type | USB 2.0 hub controller |
| Number of Downstream Ports | 2 ports |
| تۆپۆلۆژی | Single-TT |
| Supported USB Speeds | Low-speed, full-speed, and high-speed |
| USB Interface | USB 2.0 |
| Configuration Method | GPIO and EEPROM configurable |
| ڤۆڵتیەی دابینکردن | 3.3 V or 5 V |
| پلەی گەرمیی کارکردن | 0 °C to 70 °C |
| Temperature Grade | C-grade |
| پاکێج | QFN-28-EP, 5 mm x 5 mm |
| ژمارەی پین | 28 pins |
| Exposed Pad | Yes |
| جۆری دامەزراندن | Surface mount |
| Shipping Format | Tape and reel |
| Datasheet Document Length | 25 pages |
| Datasheet File Size | 662 Kbytes |
| دۆخی RoHS | Compliant |
| Maximum USB Operating Speed | 12 Mbit/s |
| USB Host-to-Device Relationship | Bus-powered hub topology |
| Manufacturer | Infineon Technologies |
ڕێنمایی ڕێکخستنی پینی CY7C65634-28LTXCT qfn-28-ep, 5 mm x 5 mm
ڕێکخستنی پین بۆ CY7C65634-28LTXCT (پاکێجی qfn-28-ep, 5 mm x 5 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ CY7C65634-28LTXCT.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
CY7C65634-28LTXCT گونجاوە بۆ 6 بەکارھێنانs: Compact Two-Port USB Hub, Industrial Data-Acquisition Equipment, USB Test and Measurement Fixture, USB Peripheral Expansion Product, Embedded USB-to-Serial Bridge Hub, Computer and Network Accessory.
Compact Two-Port USB Hub
The CY7C65634-28LTXCT fits a compact two-port USB hub because it provides two downstream ports, a single-TT topology, and support for low-, full-, and high-speed USB devices. The 28-pin QFN package with a 5 mm by 5 mm footprint also helps constrain board area. Use the exposed-pad land pattern and matched USB traces from the manufacturer layout guidance. GPIO and EEPROM configurability can support port behavior or product-specific settings, although both operating voltages and supported peripherals must match the host design.
پێشنیارکراو
Industrial Data-Acquisition Equipment
The CY7C65634-28LTXCT can organize two USB connections in industrial data-acquisition equipment that needs both low-speed control devices and high-speed peripherals on one host interface. Its single-TT architecture helps separate traffic by speed, while the 3.3 V or 5 V operating options accommodate different power partitions. The 0 °C to 70 °C rating suits controlled indoor enclosures. Deployment outside that range requires a suitably rated controller, and USB trace routing should remain isolated from motors, switching supplies, and high-current relays.
پێشنیارکراو
USB Test and Measurement Fixture
The CY7C65634-28LTXCT is suitable for a two-channel USB test fixture where a host must connect to two instruments or programmable devices. Its high-speed, full-speed, and low-speed support allows one controller to cover devices using multiple USB rates. The 28-pin QFN footprint supports dense test hardware, while exposed-pad construction provides a defined thermal path into PCB copper. Validate enumeration, suspend behavior, and sustained bus loading with the intended host software and accessory combinations.
پێشنیارکراو
USB Peripheral Expansion Product
The CY7C65634-28LTXCT can add two managed USB connections to a compact peripheral without using a passive splitter. GPIO and EEPROM configuration gives the product a path to implementing port-specific behavior or storing device settings. The 3.3 V and 5 V operating options provide flexibility across host and accessory power arrangements. Place input and output decoupling near the device, preserve the exposed-pad thermal path, and route USB differential pairs with controlled impedance and minimal stubbing to maintain reliable enumeration.
پێشنیارکراو
Embedded USB-to-Serial Bridge Hub
The CY7C65634-28LTXCT can serve as the hub-management element in an embedded product that exposes two USB-to-serial bridge connections. Its two-port single-TT arrangement provides a defined upstream relationship for the host and downstream devices, while supporting all three USB transfer-rate categories. The small 5 mm by 5 mm QFN outline is advantageous for space-constrained instruments. Configuration stored in EEPROM or assigned through GPIO can support product-specific port management, subject to the controller’s documented electrical and timing constraints.
پێشنیارکراو
Computer and Network Accessory
The CY7C65634-28LTXCT is appropriate for a compact computer or network accessory requiring two USB connections from one host port. The single-TT topology manages mixed-speed devices without treating the product as a basic USB splitter, and the controller supports current low-, full-, and high-speed peripherals. Its C-grade 0 °C to 70 °C specification fits conventional indoor equipment. Thermal and USB signal integrity remain important in small enclosures, so provide the manufacturer’s exposed-pad copper and via arrangement without placing noisy switching circuitry beneath the differential pairs.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ CY7C65634-28LTXCT — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە |
|---|---|
| Brand | Infineon Technologies |
| Package | QFN-28-EP (5 mm x 5 mm) |
| Pin Count | 28 pins plus exposed pad |
| USB Version | USB 2.0 |
| Downstream Ports | 2 ports |
| Topology | Single-TT |
| Supported USB Speeds | Low-speed, full-speed, and high-speed |
| Supply Voltage | 3.3 V or 5 V |
| Operating Temperature | 0 °C to 70 °C |
| Configuration | GPIO and EEPROM configurable |
| Shipping Format | Tape and reel |
| RoHS Status | Compliant |
جیاکەرەوە سەرەکییەکان
- Two-port hub integration in a compact package (بەراورد بەCY7C68013A-56LTXI)
- Mixed-speed USB support with a single-TT topology (بەراورد بەUSB2514BI-AEZG)
- Configuration flexibility for compact products (بەراورد بەUSB2517-JZX-TR)
تێبینییەکانی دیزاین
Use the manufacturer land pattern and exposed-pad connection instructions without changing the via arrangement. Place the USB differential routes directly between the controller and connectors, keep the traces short, and avoid test pads or unnecessary stubs on either side of each pair. Maintain a continuous reference plane beneath the pairs and separate them from switching-regulator switching nodes and high-current inductive paths.
Determine whether the hub operates from 3.3 V or 5 V before laying out the power network and selecting port-power components. Follow the manufacturer guidance for decoupling, supply sequencing, and downstream-port power management. Keep high-current switching paths away from the controller area, and connect the exposed pad to the prescribed ground structure so it can transfer heat without introducing additional USB return-path discontinuities.
USB high-speed signals require matched routing and a continuous reference plane. Keep connector and controller placement aligned so the differential pairs do not need to bend sharply, split around obstacles, or run beside unrelated high-speed edges. Apply the connector and controller impedance requirements consistently, and inspect the completed layout for accidental via stubs or discontinuities in the return path.
Do not treat a USB 2.0 controller with a similar function as a solder-in substitute without verifying the complete pinout and software model. GPIO assignments, EEPROM configuration, power behavior, and enumeration behavior can differ even when another controller also supports two ports. Confirm the package drawing, electrical limits, configuration sequence, and USB compliance requirements before approving a replacement.
زانیاری پابەندبوون
The JLCPCB listing identifies the part as RoHS compliant. No separate REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was established.