CY7C68013A-56LTXC - Low-Power USB 2.0 Controller | Infineon
MPN: CY7C68013A-56LTXC ✓ چالاکCY7C68013A-56LTXC گشتی
A USB 2.0 peripheral controller is a specialized microcontroller that communicates with a USB host while exposing programmable data-transfer functions to the surrounding equipment. Its position in the hierarchy is USB interface controller → application-specific microcontroller → integrated circuit → semiconductor. The EZ-USB FX2LP architecture combines an 8-bit data-bus interface with dedicated USB control hardware, allowing portable peripherals, test equipment, and data-acquisition products to transfer data without implementing a complete USB host stack.
The controller operates from 3 V to 3.6 V and uses a 24 MHz clock. The manufacturer describes 16K of embedded RAM, 24 GPIOs, and an integrated USB 2.0 transceiver. The 56-pin QFN construction supports compact PCB layouts, while the integrated transceiver avoids the additional area required by a separate USB transceiver. The architecture supports transfer rates exceeding 53 MB per second while using the maximum USB 2.0 bandwidth.
The 8051-compatible core provides a familiar firmware platform, while the USB Serial Interface Engine handles low-level protocol functions and the controller’s parallel data path connects it to external data sources. Firmware can configure endpoint behavior, packet handling, and data movement between USB and the external 8-bit bus. This division of responsibilities allows a product to present a specialized USB peripheral function while reusing relatively simple external data-acquisition or buffering hardware.
Typical uses include portable logic analyzers, test-and-measurement adapters, data-acquisition equipment, industrial peripherals, and compact USB-to-custom-interface products. The low-power design is particularly relevant to non-battery-powered equipment where the integrated transceiver and 3 V to 3.6 V operating range simplify power architecture. The controller is also suitable for designs requiring high-speed sustained transfers rather than low-rate control-only communication.
When laying out the PCB, place the USB connector, differential data traces, and decoupling capacitors close to the controller. USB differential routing requires matched geometry and a continuous reference plane. Firmware developers should also account for the controller’s internal USB handling and external 8-bit data interface rather than treating it as a conventional general-purpose 8051 design.
This page combines the manufacturer’s key device specifications with package, sourcing, comparison, and implementation guidance. It also distinguishes genuine same-package drop-in candidates from components that may provide similar USB functionality but require a different footprint, firmware strategy, or PCB redesign.
جێگرەوەکانی جێگۆڕکێ بۆ CY7C68013A-56LTXC — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ CY7C68013A-56LTXC (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Device Type.
CY7C68013A-56LTXI
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →CY7C68033-56LTXC
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
CY7C68013A-56LTXC زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | EZ-USB FX2LP USB 2.0 peripheral controller |
| Microcontroller Core | 8051-compatible |
| USB Version | USB 2.0 |
| Embedded RAM | 16K |
| GPIO Count | 24 |
| Supply Voltage Range | 3 V to 3.6 V |
| Clock Speed | 24 MHz |
| پانی بسێ داتا | 8 bit |
| Maximum USB 2.0 Data Rate | Over 53 MB/s |
| Integrated USB Transceiver | Yes |
| Program Memory | ROMless |
| پاکێج | 56-pin QFN with exposed pad |
| جۆری دامەزراندن | Surface mount |
| Target Application | Non-battery-powered applications |
| دۆخی چرخەی ژیان | Active |
ڕێنمایی ڕێکخستنی پینی CY7C68013A-56LTXC 56-pin qfn with exposed pad
ڕێکخستنی پین بۆ CY7C68013A-56LTXC (پاکێجی 56-pin qfn with exposed pad). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ CY7C68013A-56LTXC.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
CY7C68013A-56LTXC گونجاوە بۆ 6 بەکارھێنانs: Portable USB Logic Analyzer, USB Data-Acquisition Adapter, Industrial USB Test Adapter, Custom USB-to-Parallel Interface, Portable Measurement Instrument, USB-to-Custom-Peripheral Controller.
Portable USB Logic Analyzer
The CY7C68013A-56LTXC fits a portable logic analyzer because it combines a 24 MHz 8051-compatible core, 24 GPIOs, 16K RAM, and an integrated USB 2.0 transceiver in a 56-pin QFN. The external 8-bit bus can connect to capture buffers or a parallel acquisition stage, while the USB engine handles high-speed transfer to a host computer. Its compact package and integrated transceiver reduce board area compared with a solution using a separate USB transceiver. Firmware must define endpoint behavior, transfer buffering, and host enumeration, while the PCB needs controlled USB routing and exposed-pad thermal management.
پێشنیارکراو
USB Data-Acquisition Adapter
The CY7C68013A-56LTXC is well suited to a USB data-acquisition adapter that moves buffered samples from an external 8-bit parallel source to a host. Its USB 2.0 architecture supports transfer rates exceeding 53 MB per second, allowing the interface to avoid becoming the bottleneck in sustained acquisition. The 16K RAM provides working storage for endpoint and transfer management, while 24 GPIOs can provide control signals, trigger inputs, or status indicators. The 3 V to 3.6 V operating range simplifies integration with modern low-voltage logic. Firmware and host software must agree on packet formats, buffering, and backpressure behavior.
پێشنیارکراو
Industrial USB Test Adapter
The CY7C68013A-56LTXC can form the core of a compact industrial USB test adapter connecting a device under test to a host-based test system. Its integrated USB 2.0 transceiver reduces external circuitry, and its programmable 24 GPIOs support control, status, trigger, and handshake functions. The external 8-bit bus allows test data to be exchanged with a custom fixture or peripheral interface. Because the controller is ROMless, production programming and boot behavior must be designed into the system. Component selection should also consider operating-temperature limits, lifecycle status, and the required 56-pin QFN assembly capability.
پێشنیارکراو
Custom USB-to-Parallel Interface
The CY7C68013A-56LTXC is appropriate for a custom USB-to-parallel bridge where a legacy or specialized 8-bit peripheral must connect to a modern USB host. The controller’s 8051-compatible core can coordinate USB endpoint activity, while its parallel data path provides direct access to external buffers, registers, or acquisition logic. The 16K RAM supports local buffering, which can smooth differences between USB service intervals and the external data rate. The 56-pin QFN package supports compact products, although exposed-pad soldering and USB differential routing require careful process control. Existing 8051 code may simplify peripheral drivers, but USB firmware remains product-specific.
پێشنیارکراو
Portable Measurement Instrument
The CY7C68013A-56LTXC fits a portable measurement instrument that transfers sampled data to a laptop or embedded host over USB 2.0. Its 24 MHz clock, 16K RAM, and 24 GPIOs support basic control and acquisition coordination, while transfer rates exceeding 53 MB per second support sustained measurement streams. The integrated transceiver lowers component count and simplifies the physical USB interface. A practical implementation still needs external analog front-end circuitry, input protection, clocking, and data-capture logic. Firmware should handle endpoint buffering and ensure that acquisition timing remains independent of USB host scheduling.
پێشنیارکراو
USB-to-Custom-Peripheral Controller
The CY7C68013A-56LTXC can serve as a USB-to-custom-peripheral controller in embedded equipment that needs a compact host interface and programmable device-side behavior. Its external 8-bit bus connects efficiently to custom logic, while the 8051-compatible core manages commands and data states. The integrated USB 2.0 transceiver is especially useful when board space is constrained, and the 3 V to 3.6 V supply range aligns with modern mixed-signal designs. Product developers should use the manufacturer’s pin and timing documentation to establish voltage compatibility, then validate enumeration, retries, suspend behavior, and host-driver interoperability.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ CY7C68013A-56LTXC — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | CY7C68013A-56LTXI | CY7C68033-56LTXC |
|---|---|---|---|
| Package | 56-pin QFN with exposed pad | 56-pin QFN with exposed pad | 56-pin QFN with exposed pad |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Device Type | EZ-USB FX2LP USB 2.0 peripheral controller | EZ-USB FX2LP USB 2.0 peripheral controller | USB 2.0 controller |
جیاکەرەوە سەرەکییەکان
- Integrates USB transceiver, controller, and 8051-compatible processing (بەراورد بەCY7C68033-56LTXC)
- Provides 24 GPIOs in a compact 56-pin QFN (بەراورد بەCY7C68033-56LTXC)
- Supports sustained USB 2.0 bandwidth (بەراورد بەCY7C68013A-56LTXI)
تێبینییەکانی دیزاین
Treat the USB connection as a controlled-impedance differential pair. Route the D+ and D+ lines together with matched geometry, avoid stubs, and maintain a continuous ground reference beneath the pair. Place the USB connector and controller close enough to keep the route short, while keeping switching nodes and other high-current paths away from the USB signals. Component placement and connector orientation should follow the manufacturer’s reference layout.
The 56-pin QFN uses an exposed pad for thermal coupling. Create a solderable thermal-pad area under the device and connect it to ground through a dense via array that follows the package drawing and assembly-process rules. Estimated: thermal performance depends on the number and diameter of thermal vias, copper area, board thickness, and ambient temperature; use the manufacturer’s package data before assigning a junction-temperature limit.
Place input and output decoupling capacitors close to their respective supply pins and use separate paths for quiet analog supply requirements. The device operates from 3 V to 3.6 V, so USB bus-powered systems should include the required source voltage and ensure the operating margin remains valid at the highest bus voltage. Check whether peripheral current can cause the supply to enter a droop condition during sustained USB data transfer.
Do not treat the USB 2.0 rating as permission to use an arbitrary external 8-bit interface speed. The parallel bus, FIFO behavior, firmware timing, and USB packet service must be coordinated without losing data. Also avoid substituting packages that use the same 56-pin count but a different land pattern; the CY7C68013A-56PVXC and CY7C68013A-128AXC are not drop-in package matches for the 56-pin QFN target.
زانیاری پابەندبوون
The manufacturer product page does not provide an explicit compliance status in the retrieved product listing. RoHS and REACH are mentioned only generically in a comparison listing, so the individual statuses remain unknown. The device is an application-specific USB controller rather than an automotive-qualified component.