CY7C68013A-56PVXI - 48MHz USB 2.0 Controller | Infineon
MPN: CY7C68013A-56PVXI ✗ کۆتایی ژیانCY7C68013A-56PVXI گشتی
An EZ-USB FX2LP controller is a specialized USB interface microcontroller that combines peripheral control logic with a fast USB 2.0 data path. Within the semiconductor hierarchy, it is a USB interface controller, application-specific microcontroller, and member of the EZ-USB FX2LP family. This integration reduces the component count required for USB-to-serial, data acquisition, test-and-measurement, and industrial peripheral designs.
Three headline characteristics distinguish the CY7C68013A-56PVXI. Its 48 MHz 8051-compatible processor supports firmware-driven endpoint and transfer control, while 16 KB of on-chip RAM provides working storage for USB descriptors, buffers, and application state. Its 24 GPIOs provide direct peripheral interfacing, and the integrated USB 2.0 interface supports transfer rates exceeding 53 MB/s under suitable host and bus conditions.
The device uses the FX2LP architecture in which programmable endpoint logic controls how USB data is transferred between the host and internal FIFOs. Firmware configuration determines endpoint type, maximum packet size, and buffer ownership. This flexibility is useful for synchronous transfers, bulk data movement, vendor-specific commands, and control/status functions. The ROMless architecture keeps the target firmware external, allowing application-specific USB behavior to be updated without changing the controller.
Typical uses include high-speed data acquisition, logic analyzers, test equipment, USB-to-serial equipment, industrial measurement systems, and USB-connected peripherals. The 24 GPIOs can support external clocks, triggers, indicators, and interface signals, while the integrated transceiver supports direct USB connectivity when the board layout follows the manufacturer's reference guidance.
A critical design consideration is USB signal integrity. Route D+ and D- as a controlled-impedance differential pair, minimize stubs and unnecessary vias, place termination and protection components close to the connector, and observe the required separation from noisy digital and switching-power paths. Firmware must also enumerate all 24 GPIOs correctly and handle suspend, resume, and bus-disconnect states.
This page combines device specifications, commercial sourcing guidance, verified drop-in alternatives, application guidance, and practical PCB design notes. It helps engineers compare package, temperature, memory, GPIO, and USB-controller differences before committing a new design or maintaining an existing USB 2.0 peripheral.
جێگرەوەکانی جێگۆڕکێ بۆ CY7C68013A-56PVXI — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ CY7C68013A-56PVXI (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Product Type, Package, USB Interface.
CY7C68013A-56PVXC
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →CY7C68013-56PVC
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
CY7C68000-56PVXC
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →CY7C68013A-56PVXI زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | ROMless EZ-USB FX2LP USB 2.0 peripheral controller |
| Processor Core | 8051-compatible |
| Clock Frequency | 48 MHz |
| On-Chip RAM | 16 KB |
| General-Purpose I/O Count | 24 |
| USB Version | USB 2.0 |
| USB Interface | EZ-USB FX2LP with integrated USB 2.0 transceiver |
| Maximum USB Data Transfer Rate | Over 53 MB/s |
| Program Memory Architecture | ROMless |
| پاکێج | 56-pin SSOP, 0.295 inch body width, 7.50 mm width |
| جۆری دامەزراندن | Surface mount |
| مەودای پلەی گەرمیی کارکردن | -40 °C to +85 °C |
| Application Category | Embedded > Application Specific Microcontrollers |
| Power Class | Low-power, non-battery-powered applications |
ڕێنمایی ڕێکخستنی پینی CY7C68013A-56PVXI 56-pin ssop, 0.295 inch body width, 7.50 mm width
ڕێکخستنی پین بۆ CY7C68013A-56PVXI (پاکێجی 56-pin ssop, 0.295 inch body width, 7.50 mm width). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ CY7C68013A-56PVXI.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
CY7C68013A-56PVXI گونجاوە بۆ 6 بەکارھێنانs: USB Logic Analyzer, High-Speed Data Acquisition, USB-to-Serial Test Instrument, Industrial USB Peripheral, USB Communications Bridge, Automated Test Equipment.
USB Logic Analyzer
The CY7C68013A-56PVXI fits a USB-connected logic analyzer because its 48 MHz 8051-compatible core, 24 GPIOs, and integrated USB 2.0 interface can manage capture control and high-volume sample transfer. The 16 KB RAM provides space for endpoint buffers, status flags, and acquisition state, while the FX2LP architecture supports programmable USB endpoints. Using the manufacturer's reference layout, keep the D+ and D- pair controlled and short, isolate it from switching nodes, and validate the capture path for the required sample rate. Firmware must align endpoint packet sizes, buffer ownership, trigger events, and transfer completion handling.
پێشنیارکراو
High-Speed Data Acquisition
The CY7C68013A-56PVXI is appropriate for USB 2.0 data-acquisition equipment that must transfer captured samples to a host while performing peripheral control. Its FX2LP data path supports more than 53 MB/s under suitable conditions, and the 48 MHz processor can coordinate endpoint buffering and acquisition status. The 24 GPIOs support triggers, ready signals, and mode controls. Design the capture section and USB controller section so high-current switching or analog activity does not degrade signal integrity near D+ and D-. Firmware should use bounded buffer transfers, explicit stall handling, and orderly suspend and resume behavior.
پێشنیارکراو
USB-to-Serial Test Instrument
The CY7C68013A-56PVXI can serve as the USB-facing controller in a high-speed USB-to-serial test instrument. Firmware can implement vendor-specific commands, configure the 24 GPIOs for device control, and use the 16 KB RAM for descriptors and transfer buffers. Compared with a discrete USB transceiver and separate microcontroller arrangement, the integrated USB 2.0 controller can reduce board area and simplify firmware ownership. The implementation must still verify connector protection, differential routing, grounding, and host compatibility. Use the manufacturer electrical-characteristics tables for operating voltage, current, and USB transceiver limits before finalizing the circuit.
پێشنیارکراو
Industrial USB Peripheral
The CY7C68013A-56PVXI suits a non-battery-powered industrial USB peripheral requiring programmable data transfer and several digital control lines. Its -40 °C to +85 °C operating range supports equipment expected to operate across extended industrial temperature conditions, while 24 GPIOs can connect relays, indicators, interlocks, and status inputs. The ROMless architecture permits application firmware to be stored externally and revised independently of the controller. Layout should isolate USB traces from motors and power conversion stages, provide robust connector protection, and use controlled impedance. Firmware should implement watchdog recovery, enumeration error handling, and safe output states during USB suspend or disconnect.
پێشنیارکراو
USB Communications Bridge
The CY7C68013A-56PVXI can act as the high-speed USB endpoint in a communications bridge that exchanges framed data with an external UART, SPI, or parallel device. Its 48 MHz 8051-compatible core provides deterministic peripheral handling, and the FX2LP endpoints can separate command traffic from bulk data. The 16 KB RAM should be allocated carefully if double-buffering is required, while the 24 GPIOs can provide chip selects, interrupts, and flow control. The principal design trade-off is the obsolete controller family: existing firmware may work well, but new designs should verify successor availability before committing to a long product life.
پێشنیارکراو
Automated Test Equipment
The CY7C68013A-56PVXI fits automated test equipment requiring a compact USB 2.0 command interface and real-time fixture control. The 24 GPIOs can operate triggers, relays, pass/fail indicators, and interlock signals, while the FX2LP controller moves measurement data to a host at high throughput. The 8051-compatible architecture also allows proven firmware to remain close to the original EZ-USB development model. For a new platform, consider whether external firmware storage and an obsolete controller lifecycle are acceptable. Prototype the USB connector, protection network, impedance stack-up, and ground return before connecting it to sensitive test circuitry.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ CY7C68013A-56PVXI — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | CY7C68013A-56PVXC | CY7C68013-56PVC | CY7C68000-56PVXC |
|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | 56-pin SSOP | 56-pin SSOP | 56-pin SSOP | 56-pin SSOP |
| Controller Family | EZ-USB FX2LP | EZ-USB FX2LP | CY7C68013 generation | CY7C68000 simplified controller |
| USB Interface | USB 2.0 with integrated transceiver | USB 2.0 with integrated transceiver | USB controller | USB controller |
جیاکەرەوە سەرەکییەکان
- Combines the established FX2LP controller with a 48 MHz 8051-compatible core (بەراورد بەCY7C68000-56PVXC)
- Supports the full industrial temperature designation (بەراورد بەCY7C68013A-56PVXC)
- Uses the newer CY7C68013A controller generation (بەراورد بەCY7C68013-56PVC)
تێبینییەکانی دیزاین
Route USB D+ and D- as a short, coupled differential pair with a continuous reference plane and the impedance specified by the manufacturer's layout guidance. Avoid test pads, unnecessary vias, and branch stubs on the pair. Place connector protection and series-resistance components close to the USB connector, and keep switching-power paths and high-current return currents away from the D+ and D- region.
Use the manufacturer reference schematic and pin-description table when assigning all 56 SSOP pins. Confirm external firmware memory, crystal or clock components, reset circuitry, decoupling, and exposed support functions against the selected ordering code. Maintain short ground returns from bypass capacitors and use a low-impedance plane connection beneath the device to reduce return-path discontinuity around USB clocking and signal transitions.
A shared 56-pin SSOP outline does not prove that an alternative is functionally interchangeable. Validate endpoint count and type, packet-size limits, firmware memory requirements, RAM use, GPIO assignments, interrupt behavior, suspend current, and operating-temperature grade. CY7C68013A-56PVXC is the closest family candidate, while CY7C68013-56PVC and CY7C68000-56PVXC can differ in controller resources and require a firmware review.
Separate the quiet digital and USB sections from analog or switching-supply sections in the power-distribution network. Place local high-frequency bypass capacitance at the supply pins and follow the manufacturer's capacitance values and placement diagrams. Because the target is specified for non-battery-powered applications, verify standby and suspend-current requirements against the complete system rather than relying only on the controller's operating-current specification.
زانیاری پابەندبوون
The manufacturer and catalog information confirms the part identity, package, controller family, memory, GPIO count, clock, and temperature range. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer or current product documentation.