CY7C68300C-56PVXC USB 2.0 ATA Bridge | Infineon
MPN: CY7C68300C-56PVXC ✓ چالاکCY7C68300C-56PVXC گشتی
A USB-to-ATA bridge is an interface controller that allows a USB host to communicate with an ATA disk or optical-drive subsystem through a USB connection. It belongs to the USB interface bridge, peripheral controller, and interface IC hierarchy. The CY7C68300C-56PVXC combines USB device-controller and ATA interface functions in one package, reducing the component count required by legacy USB storage adapters and embedded storage appliances.
The principal features include USB 2.0 compatibility, Full Speed and High Speed operation, ATA and ATAPI support, and a 3.3 V supply. It is intended for applications requiring a conventional USB connection to an ATA storage device. The 56-pin surface-mount package supports compact external-drive and industrial-storage designs, although its relatively large lead count requires careful PCB routing and adequate pin clearance.
The controller is associated with the EZ-USB family and provides a dedicated interface between the USB system and ATA/ATAPI peripherals. System designers must account for the voltage levels, signal timing, connector requirements, and enumeration behavior of the complete USB storage system rather than treating the bridge as a generic data connector.
Typical uses include USB-to-IDE adapters, legacy external storage enclosures, backup appliances, industrial data-retention equipment, and embedded systems that retain an ATA interface while adding USB connectivity. For these applications, the IC can reduce parallel-ATA cabling by presenting a USB-facing port to a host computer while the controller handles the ATA-side protocol translation.
PCB implementation requires placing the controller close to the USB connector, maintaining the required USB signal topology, and providing clean 3.3 V power with appropriate decoupling. The ATA side should be routed according to the manufacturer's reference layout, with attention to signal integrity, ground continuity, and connector strain relief. Firmware and operating-system support must also be validated for the intended ATA device class.
This product page combines the device identity, electrical and packaging specifications, verified cross-reference candidates, application guidance, and practical implementation notes. It also distinguishes the confirmed same-family revision from unverified substitutes, helping engineers avoid assuming that a similar USB bridge is electrically and pin compatible.
جێگرەوەکانی جێگۆڕکێ بۆ CY7C68300C-56PVXC — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ CY7C68300C-56PVXC (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Product Type, Operating Temperature.
CY7C68300B-56PVXC
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →CY7C68300C-56PVXC تایبەتمەندییەکان
| Product Type | USB 2.0 to ATA/ATAPI bridge controller |
| USB Interface | USB 2.0 |
| Supported USB Speeds | Full Speed and High Speed |
| Storage Interface | ATA/ATAPI |
| ڤۆڵتیەی دابینکردن | 3.3 V |
| پلەی گەرمیی کارکردن | 0°C to 70°C |
| Device Classification | Line or bus controller |
| پاکێج | 56-pin SSOP |
| ژمارەی پین | 56 pins |
| جۆری دامەزراندن | Surface mount |
| Product Family | EZ-USB AT2LP |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | unknown |
ڕێنمایی ڕێکخستنی پینی CY7C68300C-56PVXC 56-pin ssop
ڕێکخستنی پین بۆ CY7C68300C-56PVXC (پاکێجی 56-pin ssop). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ CY7C68300C-56PVXC.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
CY7C68300C-56PVXC گونجاوە بۆ 6 بەکارھێنانs: USB-to-IDE Storage Adapter, External Storage Enclosure, Legacy ATA Backup Appliance, Industrial Data-Retention System, Embedded ATA-to-USB Gateway, Portable Data-Transfer Device.
USB-to-IDE Storage Adapter
The CY7C68300C-56PVXC fits a USB storage adapter that exposes a legacy ATA disk interface to a modern USB host. Its 3.3 V operating supply and Full Speed and High Speed USB 2.0 support place USB traffic handling in the controller while the ATA side remains compatible with the target drive. The design must match the manufacturer's USB routing and ATA interface examples, validate the connector and drive electrical requirements, and confirm operating-system enumeration behavior before production release.
External Storage Enclosure
An external storage enclosure can use the CY7C68300C-56PVXC to bridge a USB port to an internal ATA or ATAPI drive. The controller's 3.3 V supply and USB 2.0 interface allow the enclosure to present a common external connection without exposing the drive's parallel bus. Designers should evaluate heat dissipation, inrush behavior, cable shielding, ground continuity, and the enclosure's grounding structure. The ATA connector and cable must also be verified against the selected drive's mechanical and signal requirements.
Legacy ATA Backup Appliance
The CY7C68300C-56PVXC is appropriate for backup appliances that need to retain ATA storage media while presenting USB connectivity to a host. USB 2.0 Full Speed and High Speed operation provides a defined transport for the bridge controller, while ATA/ATAPI support connects the storage subsystem. A production design should test the full media set, error handling, resume behavior, and operating-system compatibility. Firmware should be validated against each drive type because protocol behavior and margin requirements are not interchangeable across every ATA product.
Industrial Data-Retention System
The CY7C68300C-56PVXC can serve as the USB-to-storage interface in an industrial data-retention system that uses ATA-compatible media. Its 0°C to 70°C operating range suits equipment maintained within that environmental envelope, but it does not cover extended-temperature industrial or automotive environments. The enclosure should control temperature rise around the controller and storage device. System qualification should include power interruption, brownout recovery, sustained transfer, electromagnetic compatibility, and long-duration data-integrity testing.
Embedded ATA-to-USB Gateway
The CY7C68300C-56PVXC fits an embedded gateway that converts an ATA interface into a USB-facing storage endpoint. This arrangement preserves established ATA hardware while adding a host-compatible connection for configuration, data extraction, or maintenance. The controller's USB 2.0 operation and ATA/ATAPI bridge function allow protocol translation in one device. Firmware must implement enumeration, command translation, timeout recovery, and media-change handling, while the hardware should follow the manufacturer's reference layout for signal and power integrity.
Portable Data-Transfer Device
A portable data-transfer device can use the CY7C68300C-56PVXC to connect ATA-based removable media to a USB host. The 56-pin SSOP package supports integration into a compact adapter, and USB 2.0 High Speed support is useful when the attached media can sustain the corresponding transfer rate. Actual throughput remains constrained by the ATA device, host controller, command overhead, and cable behavior. Mechanical retention, connector orientation, strain relief, and insertion-cycle reliability should be evaluated with the complete portable enclosure.
داتای سەرچاوەی ئەندازیاری بۆ CY7C68300C-56PVXC — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | CY7C68300B-56PVXC |
|---|---|---|
| Brand | Infineon | Cypress Semiconductor |
| Package | 56-pin SSOP | 56-pin SSOP - same package |
| Device Type | USB 2.0 to ATA/ATAPI bridge controller | EZ-USB USB-to-ATA controller |
| USB Interface | USB 2.0 | USB 2.0 |
| Storage Interface | ATA/ATAPI | ATA/ATAPI |
| Supply Voltage | 3.3 V | 3.3 V |
| Operating Temperature | 0°C to 70°C | 0°C to 70°C |
| Pin Count | 56 pins | 56 pins |
| Revision Designation | C revision | B revision |
جیاکەرەوە سەرەکییەکان
- Exact C-revision ordering identity (بەراورد بەCY7C68300B-56PVXC)
- Identical high-level bridge architecture (بەراورد بەCY7C68300B-56PVXC)
- Confirmed commercial 3.3 V operating point (بەراورد بەCY7C68300B-56PVXC)
تێبینییەکانی دیزاین
Use the manufacturer's USB and ATA layout guidance as the baseline for placement and routing. Keep the controller, USB connector, and protection components positioned to minimize trace length on the USB side. Maintain a continuous ground reference, route high-speed USB differential pairs as a controlled pair, and avoid placing disruptive switching paths beneath the connector or controller. Confirm the exact SSOP footprint dimensions against the current package drawing before releasing artwork.
The controller operates from 3.3 V, so provide a clean supply with local high-frequency decoupling at the power pins. Calculate the connector and attached ATA device's current requirement separately from the controller's own consumption, then size the upstream regulator for worst-case startup and operating demand. Check voltage tolerance, inrush, brownout behavior, and the storage device's power-sequencing requirements. The available product specifications do not state the controller's complete maximum-current limits.
ATA and USB are both sensitive to signal integrity, and the 56-pin SSOP leaves little room for correcting a poor layout. Assign USB, ATA, power, and ground pins according to the manufacturer pin-description table, then route ATA signals with the shortest practical paths and appropriate return paths. Isolate clocks and switching-regulator nodes from USB data. Review crosstalk, propagation delay, impedance, and connector-to-controller channel length using the actual board stack-up.
Do not assume that any USB-to-ATA controller with a similar function is a drop-in substitute. The confirmed related candidate is the B-revision CY7C68300B-56PVXC in the same 56-pin SSOP family, but its revision-specific pin, timing, and protocol behavior must be checked in the manufacturer documentation. Also verify operating-system support, media-change handling, and power-cycle recovery. A successful USB link does not by itself prove full ATA command and data-integrity compatibility.
زانیاری پابەندبوون
The product documentation and technical records do not state the requested environmental or material-compliance statuses. No compliance designation is inferred from the package, operating temperature, or distributor listing.