CY7C68301C-56LTXC - USB 2.0 ATA Bridge | Infineon
MPN: CY7C68301C-56LTXC ✓ چالاکCY7C68301C-56LTXC گشتی
A USB-to-ATA bridge is an interface controller that translates USB host transactions into ATA and ATAPI commands used by hard-disk drives, optical storage, and related peripherals. This device belongs to the USB interface controller hierarchy, which connects USB host controllers to storage media and provides the electrical and protocol translation required for removable or externally connected storage systems.
The principal feature set includes USB 2.0 operation, ATA and ATAPI support, seven endpoints, and three supported transfer types. Bulk transfers suit disk data movement, interrupt transfers support status or control traffic, and isochronous transfers provide time-sensitive channels. The 3.3 V operating supply and compact 8 mm by 8 mm QFN package support space-constrained external storage equipment.
The AT2LP implementation is intended for high-speed USB storage interfaces. Its endpoint structure provides multiple channels for command, status, and data traffic between the USB host and an attached ATA device. Because the controller handles protocol translation, the storage subsystem can use USB connectivity without implementing the USB-to-ATA transaction layer directly.
Typical uses include USB-to-IDE adapters, external storage enclosures, compact disk systems, and legacy ATA equipment connected to a modern USB host. The named CY4615B development kit is associated with the device for design evaluation. System integration also requires careful USB routing, power-supply design, ATA signal conditioning, and thermal management around the exposed-pad package.
For a new layout, route USB and ATA differential pairs on controlled-impedance layers, keep bypass capacitors close to the supply pins, and provide uninterrupted ground references around the package. Confirm voltage levels, connector orientation, power-source requirements, and ATA master or slave configuration against the manufacturer datasheet before releasing production hardware.
This page combines the device specifications, protocol capabilities, application guidance, package information, and documented family comparisons needed to evaluate the CY7C68301C-56LTXC. The alternatives section is limited to same-package family candidates identified through cross-reference records, and each substitution still requires firmware, electrical, and footprint validation before use.
جێگرەوەکانی جێگۆڕکێ بۆ CY7C68301C-56LTXC — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ CY7C68301C-56LTXC (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package Type, Product Type, Product Family.
CY7C68300C-56LFXC
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →CY7C68300B-56LFXC
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →CY7C68301C-56LFXC
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →CY7C68300C-56LTXC
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →CY7C68000A-56LTXCT
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
CY7C68301C-56LTXC تایبەتمەندییەکان
| Product Type | USB 2.0 to ATA/ATAPI bridge controller |
| USB Specification | USB 2.0 |
| ڤۆڵتاژی دابینکردنی کارکردن | 3.3 V |
| Storage Interface | ATA/ATAPI |
| Endpoint Count | 7 endpoints |
| Supported Transfer Types | Bulk, interrupt, and isochronous |
| Package Type | 56-pin QFN with exposed pad |
| Package Dimensions | 8 mm x 8 mm |
| ژمارەی پین | 56 pins |
| جۆری دامەزراندن | Surface mount |
| Product Series | EZ-USB AT2LP |
| Development Kit | CY4615B |
ڕێنمایی ڕێکخستنی پینی CY7C68301C-56LTXC 8 mm x 8 mm
ڕێکخستنی پین بۆ CY7C68301C-56LTXC (پاکێجی 8 mm x 8 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ CY7C68301C-56LTXC.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
CY7C68301C-56LTXC گونجاوە بۆ 6 بەکارھێنانs: External ATA Storage Enclosure, USB-to-IDE Storage Adapter, Compact Disk Systems, Industrial USB Storage Terminal, Removable Media Reader, Legacy Storage Connectivity Adapter.
External ATA Storage Enclosure
The CY7C68301C-56LTXC is suitable for bridging a conventional ATA or ATAPI drive to a USB 2.0 host. Its seven endpoints and support for bulk, interrupt, and isochronous transfers provide the protocol channels required for storage commands, status reporting, and data movement. The controller translates between USB transactions and ATA operations, reducing the host-side software burden. In an enclosure, use the 56-pin QFN footprint with careful exposed-pad thermal management and confirm that the selected drive voltage, connector, and power architecture are compatible with the complete design.
پێشنیارکراو
USB-to-IDE Storage Adapter
The CY7C68301C-56LTXC can form the central controller of a USB-to-IDE adapter for legacy ATA storage equipment. Its 3.3 V supply, USB 2.0 interface, and ATA/ATAPI capability allow a host computer to address the attached media through USB rather than a parallel IDE bus. The compact 8 mm by 8 mm QFN package helps limit adapter-board size. Designers should verify connector pin orientation, media power requirements, cable-length behavior, and whether the selected IDE connector exposes all required ATA signals before production use.
پێشنیارکراو
Compact Disk Systems
The CY7C68301C-56LTXC is applicable to compact disk systems that require a direct USB 2.0-to-ATA interface and a space-efficient controller package. Its seven endpoints support structured command, status, and data traffic, while bulk transfers are appropriate for sustained file transfer workloads. The 56-pin QFN package requires a controlled exposed-pad land pattern and adequate copper for heat removal. For optical or magnetic media, verify startup current, spin-up behavior, ATA signal integrity, and the media's supported command set before selecting the final power and interface implementation.
پێشنیارکراو
Industrial USB Storage Terminal
The CY7C68301C-56LTXC can support an industrial USB storage terminal when the enclosure uses ATA or ATAPI media and requires transparent USB connectivity. The controller's seven endpoints and support for bulk, interrupt, and isochronous transfer types allow the design to handle storage data alongside status traffic. Industrial use should emphasize stable power sequencing, ESD protection, connector durability, and thermal performance across the intended enclosure temperature range. Confirm operating-temperature and compliance requirements in the manufacturer documentation before using the device in safety-sensitive or regulated equipment.
پێشنیارکراو
Removable Media Reader
The CY7C68301C-56LTXC can act as the USB interface engine in a removable-media reader that exposes an ATA-compatible device to a USB host. Bulk transfers provide an efficient path for file data, while interrupt and isochronous channels support the endpoint behavior required by the storage protocol and attached media. Its compact package is useful in portable reader designs, although USB bus-power limits must be checked against the media's startup demand. The final circuit should also include connector protection, reliable cable routing, and an enclosure strategy that limits temperature rise around the exposed pad.
پێشنیارکراو
Legacy Storage Connectivity Adapter
The CY7C68301C-56LTXC is useful in legacy-storage connectivity products that allow older ATA equipment to communicate with a USB-based host. The EZ-USB AT2LP architecture bridges USB transactions and ATA/ATAPI commands while presenting a standardized USB interface to the connected computer. The 56-pin QFN package reduces board-area requirements relative to many through-hole bridges. Validation should cover media identification, error reporting, transfer reliability, hot-plug behavior, and the exact connector mapping. Use the manufacturer datasheet to define device configuration and verify that every exposed-pad connection matches the recommended layout.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ CY7C68301C-56LTXC — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | CY7C68300C-56LFXC | CY7C68300B-56LFXC | CY7C68301C-56LFXC | CY7C68300C-56LTXC | CY7C68000A-56LTXCT |
|---|---|---|---|---|---|---|
| Package | 56-QFN (8x8 mm) | 56-QFN (8x8 mm) | 56-QFN (8x8 mm) | 56-QFN (8x8 mm) | 56-QFN (8x8 mm) | 56-QFN |
| Brand | Infineon | Infineon | Infineon | Infineon | Infineon | Infineon |
جیاکەرەوە سەرەکییەکان
- Matches the EZ-USB AT2LP USB-to-ATA bridge family (بەراورد بەCY7C68000A-56LTXCT)
- Supports bulk, interrupt, and isochronous transfers (بەراورد بەCY7C68300B-56LFXC)
- Associated evaluation platform is identified (بەراورد بەCY7C68300C-56LFXC)
تێبینییەکانی دیزاین
Use the manufacturer exposed-pad layout for the 56-pin QFN rather than constructing a footprint from body dimensions alone. Provide a thermal-via pattern under the exposed pad, connect that pad to the required ground or power net, and place high-frequency bypass capacitance close to the supply pins. Maintain short, symmetrical routing for USB differential signals and avoid placing disruptive switching or high-current paths beneath the controller.
Route USB D+ and D- as a controlled-impedance differential pair over a continuous reference plane, with no intervening layer changes or stubs. Keep the USB connector, protection components, controller, and clock source in a compact signal path. ATA signals have different rise-time and crosstalk considerations, so review the datasheet's trace-length, series-resistor, and connector recommendations before finalizing the board.
Do not assume that two controllers in the same 56-QFN family are automatically interchangeable. Check every numbered ball, exposed-pad net, supply rail, configuration input, clock connection, and programming interface against the manufacturer pin-description table. Also validate USB enumeration, ATA command handling, device power requirements, and wake or low-power behavior with the intended media before approving a substitution.
The 56-pin QFN includes an exposed pad, so package thermal performance depends strongly on its copper connection and the surrounding board area. Estimate junction temperature from total controller dissipation and the effective board thermal resistance rather than relying on package body size alone. In a confined external enclosure, provide airflow where practical, avoid placing the controller beside a hot regulator or drive, and verify temperature rise with the selected storage media and worst-case USB operating state.
زانیاری پابەندبوون
Compliance status was not identified in the product records and requires confirmation from the manufacturer or the authoritative component documentation.