CY7C68301C-56PVXC USB 2.0 ATA Bridge | Infineon
MPN: CY7C68301C-56PVXC ✓ چالاکCY7C68301C-56PVXC گشتی
A USB-to-ATA bridge is an interface controller within the broader semiconductor hierarchy of USB interface ICs, interface controllers, and system connectivity devices. Its role is to translate commands and data between the packet-based Universal Serial Bus architecture and the parallel command and data conventions used by ATA storage devices. This allows a storage subsystem using a legacy ATA/ATAPI connection to be accessed through a USB 2.0 host interface.
The verified product information identifies USB 2.0 support, ATA/ATAPI bridging, and high-speed USB peripheral operation as the principal functional characteristics. The ordering code CY7C68301C-56PVXC denotes a 56-lead SSOP package. The suffix also distinguishes the device revision, temperature and qualification options, and shipping format, so a replacement should be selected by the complete ordering code rather than by the base device name alone.
Technically, the bridge is designed for systems that need protocol conversion and USB connectivity for an ATA or ATAPI device. Its implementation includes USB-side and ATA-side logic, command handling, data transfer paths, and package-level support for the associated storage interface. Because the exact electrical timing, current, voltage, and environmental limits are not stated in the retrieved product records, designers should confirm those values against the manufacturer datasheet before finalizing a power, layout, or signal-integrity design.
Typical uses include legacy ATA storage adapters, USB-to-ATA equipment, embedded data acquisition systems, industrial storage controllers, and test equipment that must present an ATA/ATAPI device through USB 2.0. In these systems, the bridge reduces the need for a host to understand ATA electrical signaling and provides a standardized USB connection to the storage peripheral.
The primary design consideration is exact replacement compatibility. Board designers should verify the lead count, exposed or routed pins, supply requirements, ATA-side pin assignments, USB routing, crystal or clock requirements, and supported ATA device type against the manufacturer pin description table. Signal-routing and power-layout decisions should not be inferred solely from the family name.
This product page consolidates the confirmed USB 2.0 ATA/ATAPI interface information, package identity, source links, comparison candidates, and application guidance. It also separates confirmed facts from electrical details that still require datasheet verification, helping engineers evaluate this legacy bridge without treating generic controller assumptions as part-specific guarantees.
جێگرەوەکانی جێگۆڕکێ بۆ CY7C68301C-56PVXC — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ CY7C68301C-56PVXC (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Product Type, Package, Series.
CY7C68001-56PVXC
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →CY7C68300B-56PVXC
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →CY7C68301A-56PVXC
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
CY7C68301B-56PVXC
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →CY7C68301C-56PVXC تایبەتمەندییەکان
| Product Type | USB 2.0 to ATA/ATAPI bridge controller |
| USB Standard | USB 2.0 |
| USB Device Class | USB high-speed peripheral |
| Storage Interface | ATA/ATAPI |
| Manufacturer Product Family | EZ-USB AT2LP |
| پاکێج | 56-SSOP |
| Lead Count | 56 leads |
| جۆری دامەزراندن | Surface mount |
ڕێنمایی ڕێکخستنی پینی CY7C68301C-56PVXC 56-ssop
ڕێکخستنی پین بۆ CY7C68301C-56PVXC (پاکێجی 56-ssop). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ CY7C68301C-56PVXC.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
CY7C68301C-56PVXC گونجاوە بۆ 6 بەکارھێنانs: USB-to-ATA Legacy Storage Adapter, Industrial Data Acquisition System, Embedded Test and Measurement Equipment, USB Storage Enclosure, Legacy Computer Storage Retrofit, Portable Diagnostic Data Recorder.
USB-to-ATA Legacy Storage Adapter
The CY7C68301C-56PVXC fits an adapter that exposes an ATA or ATAPI storage device through a USB 2.0 host connection. Its EZ-USB AT2LP identity and ATA/ATAPI bridging role place it between the USB command set and the storage device’s ATA interface. Using the controller in this arrangement avoids implementing the complete ATA/ATAPI protocol and physical interface in the host. The 56-SSOP package supports a compact connector-based design, although the manufacturer’s pin description and electrical requirements must guide trace routing, supply design, and grounding.
پێشنیارکراو
Industrial Data Acquisition System
The CY7C68301C-56PVXC can be used when industrial instrumentation records data to an ATA/ATAPI storage medium while communicating with a host over USB 2.0. The controller provides protocol conversion between the USB peripheral interface and the ATA storage side, simplifying host software compared with direct ATA implementation. Its high-speed USB peripheral classification makes it relevant to acquisition systems that transfer sizable data sets. The final system design should verify clocking, power sequencing, ATA signal integrity, and thermal performance against the manufacturer electrical specifications.
پێشنیارکراو
Embedded Test and Measurement Equipment
Test equipment can use the CY7C68301C-56PVXC to connect an ATA or ATAPI-based data store to a USB 2.0 test host. This is useful where the instrument must retain a legacy storage interface but provide a modern external connection. The bridge consolidates USB command handling and ATA-side protocol behavior in one controller, allowing the host software to use a USB storage path instead of implementing ATA directly. Verify supported device classes, transfer behavior, cable requirements, and power rails in the manufacturer datasheet before production release.
پێشنیارکراو
USB Storage Enclosure
The CY7C68301C-56PVXC is applicable to a USB storage enclosure built around an ATA or ATAPI device. The 56-SSOP controller bridges the enclosure’s USB 2.0 connector to the internal storage interface, allowing the attached host to use a familiar USB storage path. Compact packaging helps conserve board area in enclosure designs where connector mechanics and heat dissipation are constrained. Design engineers should validate ATA trace topology, connector shield handling, power behavior, and device initialization rules using the manufacturer application guidance.
پێشنیارکراو
Legacy Computer Storage Retrofit
A legacy computer or embedded controller can use the CY7C68301C-56PVXC to retain ATA/ATAPI storage hardware while adding USB 2.0 connectivity. The device acts as the protocol-conversion boundary between modern USB traffic and the older storage interface. This approach is particularly relevant to equipment modernization where replacing the storage subsystem would be costly or disruptive. The retrofit should be treated as a complete interface redesign: validate connector standards, device enumeration, ATA timing, bus termination requirements, and firmware behavior rather than treating the bridge as a passive adapter.
پێشنیارکراو
Portable Diagnostic Data Recorder
The CY7C68301C-56PVXC can support a portable diagnostic recorder that stores ATA or ATAPI data locally and transfers it through USB 2.0. Its dual-role architecture separates the USB peripheral connection from the storage device interface, reducing the burden on the recorder’s main processor. This is useful in field-service equipment where collected logs must be moved to a service laptop. Designers should account for storage-device power requirements, connector reliability, operating temperature, bus signal integrity, and the controller’s current draw under the intended workload.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ CY7C68301C-56PVXC — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | CY7C68001-56PVXC | CY7C68300B-56PVXC | CY7C68301A-56PVXC | CY7C68301B-56PVXC |
|---|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | 56-SSOP | 56-SSOP | 56-SSOP | 56-SSOP | 56-SSOP |
| Lead Count | 56 leads | 56 leads | 56 leads | 56 leads | 56 leads |
| Primary Function | USB 2.0 to ATA/ATAPI bridge | EZ-USB device controller; detailed ATA support requires verification | EZ-USB AT2LP family bridge; revision details require verification | Same-family bridge revision; detailed differences require verification | Same-family bridge revision; detailed differences require verification |
جیاکەرەوە سەرەکییەکان
- Purpose-built USB 2.0 to ATA/ATAPI bridge function (بەراورد بەCY7C68001-56PVXC)
- Specific EZ-USB AT2LP family positioning (بەراورد بەCY7C68300B-56PVXC)
- Exact 56-SSOP footprint alignment (بەراورد بەCY7C68301B-56PVXC)
تێبینییەکانی دیزاین
Assign USB and ATA signals directly from the manufacturer 56-SSOP pin description table rather than from family assumptions. Keep USB routing short, provide a continuous reference plane, and avoid routing ATA-side signals beneath sources of switching noise. The retrieved product records do not provide the complete pin list, so schematic and PCB review should begin with the corresponding package drawing and datasheet revision.
Separate USB-side and ATA-side supply analysis because the connected storage device can dominate current demand while the bridge controller requires clean logic power. Check recommended input ranges, tolerance, current, and sequencing in the manufacturer electrical-characteristics table. Add local high-frequency bypass and bulk capacitance at the controller and storage connector, then validate startup and hot-plug behavior on the assembled board.
Do not treat the 56-SSOP package as proof that every CY7C68301-family ordering code is interchangeable. Device revisions can alter supported ATA devices, firmware behavior, pin assignments, or qualification. Verify the complete suffix, USB descriptors, ATA protocol support, clock source, and electrical limits. For a new design, also evaluate a current-generation USB storage interface if legacy ATA support is not mandatory.
Review ATA timing, impedance, termination, connector geometry, and USB routing against the manufacturer reference design. Pay particular attention to clock quality, ground-return continuity, and power-supply coupling because storage activity can produce large transient loads. Use scope measurements at the relevant interface points to confirm settling during enumeration, reads, writes, and device power states.
زانیاری پابەندبوون
Compliance declarations are not stated in the retrieved product records. The automotive qualification status is therefore unknown rather than assumed.