CY8C20121-SX1I - 10-IO Touch Controller | Infineon
MPN: CY8C20121-SX1I ✓ چالاکCY8C20121-SX1I گشتی
A capacitive controller is a semiconductor that detects changes in capacitance caused by a conductive object approaching or touching a sensor electrode. CapSense Express controllers belong to the capacitive-sensing controller hierarchy, where programmable I/Os, sensing electrodes, and application-specific control logic are integrated into a single device. This reduces the number of discrete components required for keys, sliders, lighting, and interface signaling.
The verified product information identifies 10 configurable I/Os. These can support one capacitive sensing slider with 10 segments, while the remaining I/Os can operate as buttons or GPIOs for functions such as driving LEDs or producing interrupt signals based on button conditions. The available documentation also associates the family with configurable touch-button and touch-interface functions.
The CY8C20121-SX1I is identified as an industrial-temperature variant in the part-number documentation. Its 8-pin SOIC format supports conventional surface-mount PCB assembly and is appropriate for compact control modules where component height and routing simplicity matter. Because the verified excerpts do not provide operating voltage, flash size, clock rate, or electrical timing values, those parameters remain subject to the manufacturer datasheet and device characterization.
Typical uses include consumer touch controls, appliance interfaces, industrial panels, access controls, compact keypads, and LED-feedback touch buttons. In a slider design, the controller evaluates the distributed capacitance among sensor segments and reports the selected position through its configurable interface. In a button design, the same device can combine touch detection with direct GPIO behavior and conditional interrupt signaling.
Designers should confirm the exact pin assignments, sensor configuration method, supported operating voltage, and firmware requirements before layout release. A two-layer implementation should preserve short sensor traces, provide an unobstructed sensor-to-electrode connection, and follow the grounding and reference layout specified by the manufacturer datasheet. The package's exposed functions should also be checked against the intended button, slider, LED, and interrupt allocation.
This product page consolidates verified distributor pricing, package information, configuration capabilities, and practical design considerations. It also separates documented facts from unavailable electrical details and avoids presenting unverified drop-in equivalents as guaranteed replacements.
جێگرەوەکانی جێگۆڕکێ بۆ CY8C20121-SX1I — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ CY8C20121-SX1I (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Product Type.
هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.
داوای جێگرەوەکان بکەCY8C20121-SX1I زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | CapSense Express capacitive-sensing controller |
| Configurable I/O Count | 10 I/Os |
| Capacitive Slider Support | 1 slider with 10 segments |
| Button Support | Up to 2 capacitive buttons indicated by family description |
| GPIO Functions | LED driving and interrupt signal generation |
| Package Type | 8-pin SOIC |
| Package Pin Count | 8 pins |
| جۆری دامەزراندن | Surface mount |
| Temperature Grade | Industrial grade indicated by part suffix I |
| Listed Unit Price | 0.3364 USD per unit at LCSC as of 2026-10-28 |
ڕێنمایی ڕێکخستنی پینی CY8C20121-SX1I 8 pins
ڕێکخستنی پین بۆ CY8C20121-SX1I (پاکێجی 8 pins). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ CY8C20121-SX1I.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
CY8C20121-SX1I گونجاوە بۆ 6 بەکارھێنانs: Capacitive Slider Interface, Appliance Touch Buttons, LED Feedback Control, Interrupt-Based User Input, Consumer Access Control, Compact Human-Interface Control Panel.
Capacitive Slider Interface
The CY8C20121-SX1I fits a compact capacitive slider because the verified feature description identifies support for one slider with 10 segments and provides 10 configurable I/Os. The controller can determine the active region among the distributed sensor electrodes and expose the selected position through its configured interface. Using the device for this function reduces the need for separate button or display-driver logic in a human-interface panel. Engineers should design the sensor electrodes and ground geometry according to the manufacturer guidance. The supplied excerpts do not state slider resolution percentages, scan rates, or position update latency, so those performance values must be confirmed in the manufacturer datasheet before defining a particular user experience.
Appliance Touch Buttons
The CY8C20121-SX1I is suitable for appliance touch buttons because its configurable I/Os can support capacitive buttons and general-purpose digital functions in the same 8-pin SOIC device. A design can allocate sensing electrodes to one- or two-button interactions while using other outputs for LED feedback or interrupt notification, depending on the final configuration. This consolidation is valuable where a front panel requires sealed capacitive controls and limited board space. The verified information does not specify debounce timing, button detection thresholds, or output drive current. Those details, together with the sensor PCB pattern, should be verified from the manufacturer documentation before a control panel enters production.
LED Feedback Control
The CY8C20121-SX1I can combine touch detection with LED-driving functions because the verified description specifically identifies GPIOs for driving LEDs based on button conditions. This arrangement is appropriate for compact keypads, handheld controls, and appliance interfaces where a touch event must immediately change a local indicator. Using configurable digital outputs reduces the number of separate interface components and allows touch input and status feedback to share one controller. The available data does not specify LED output current, duty-cycle limits, or absolute maximum ratings. The relevant electrical limits should therefore be checked in the manufacturer datasheet, and the chosen LEDs should be driven within the documented GPIO and supply-current capabilities.
Interrupt-Based User Input
The CY8C20121-SX1I can support interrupt signaling because its configurable I/Os are described as usable for interrupt signals based on button conditions. This makes the controller appropriate for battery-powered or duty-cycled interfaces in which the host processor should remain inactive until a meaningful touch event occurs. The sensor and GPIO resources remain integrated in one 8-pin SOIC package, simplifying hardware partitioning. The verified excerpts do not provide interrupt polarity, latency, wake behavior, or low-power current figures. Designers should verify those electrical and functional characteristics in the manufacturer datasheet and confirm that the selected system firmware supports the intended interrupt mode and pin configuration.
Consumer Access Control
The CY8C20121-SX1I can serve in compact access-control panels that combine a capacitive slider, touch buttons, and local LED or host-interrupt functions. The verified 10-configurable-I/O capability allows the interface resources to be consolidated rather than implemented with separate logic for every touch element. Its 8-pin SOIC package is also convenient for small control boards and surface-mounted production assemblies. However, access-control products may require security, environmental, and public-availability requirements not established by the supplied excerpts. Before design-in, engineers should verify the operating voltage, ESD behavior, temperature limits, and lifecycle documentation, and should complete a separate security and environmental review for the complete product.
Compact Human-Interface Control Panel
The CY8C20121-SX1I is well matched to a compact human-interface panel that includes a slider or one or two capacitive buttons plus LED and interrupt outputs. The verified family description combines slider, button, and GPIO capabilities in one controller, allowing a small PCB to handle both sensing and basic feedback. This integration can simplify firmware organization compared with separate sensing and interface ICs. The 8-pin SOIC footprint is appropriate for conventional surface-mount assembly, although actual connector selection and sensor-electrode layout remain application-specific. The supplied information does not state CPU speed, memory, communication protocol, or acquisition timing. Those specifications must be obtained from the manufacturer datasheet before confirming that the device satisfies the panel's response-time and host-interface requirements.
داتای سەرچاوەی ئەندازیاری بۆ CY8C20121-SX1I — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە |
|---|---|
| Package | 8-pin SOIC |
| Brand | Infineon Technologies |
| Product Type | CapSense Express capacitive-sensing controller |
| Configurable I/O Count | 10 I/Os |
| Slider Configuration | One 10-segment slider |
| Button Support | One-button and two-button controller family |
| GPIO Functions | LED driving and interrupt signal generation |
| Temperature Grade | Industrial grade indicated by suffix I |
| Listed Unit Price | 0.3364 USD at LCSC as of 2026-10-28 |
جیاکەرەوە سەرەکییەکان
- Documented slider integration in a compact controller (بەراورد بەCY8C20142-SX1I)
- Touch sensing and GPIO functions combined (بەراورد بەCY8C20142-SX1I)
- Eight-pin surface-mount integration (بەراورد بەCY8C20142-SX1I)
تێبینییەکانی دیزاین
Assign the 10 configurable I/Os before fixing the PCB layout because the documented family can combine a 10-segment slider with buttons, LEDs, and interrupt outputs. Confirm every final pin function in the manufacturer pin table and preserve the documented sensor-to-pad connection. The supplied sources do not provide the recommended sensor geometry, so do not derive copper dimensions from the package outline alone.
Treat capacitive sensor traces as high-impedance analog nodes rather than ordinary digital routes. Keep them short, isolate them from fast switching paths, and follow the manufacturer's grounding and reference-electrode guidance. The verified material identifies slider and button sensing but does not publish acquisition timing or noise figures, making bench validation under the expected touch environment essential.
Do not assume that a related CapSense Express MPN is a drop-in replacement. The verified comparison search mentions CY8C20142-SX1I, but it does not provide a complete pin map or quantified parameter differences. Compare the manufacturer pin tables, supply limits, sensor resources, package dimensions, and programming requirements before approving a substitution.
Verify the device's supply-voltage range and GPIO current limits in the manufacturer datasheet before attaching LEDs or external loads to the configurable I/Os. The verified excerpts confirm that the I/Os can drive LEDs and generate interrupts, but they do not provide current ratings. Use suitable current limiting and avoid driving load current outside the documented operating limits.
زانیاری پابەندبوون
The supplied verified excerpts do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. The part suffix I indicates an industrial-temperature variant, but it does not by itself establish AEC-Q100 qualification.