Infineon

CY8C3246AXI-131 - 50MHz PSoC 3 MCU | Infineon

MPN: CY8C3246AXI-131 ✓ چالاک
1.71 V to 5.5 V Vdss 100-pin TQFP (14 x 14 mm) Package 50 MHz Speed 64 KB (64K x 8) flash Memory
MOQ: 1 |

CY8C3246AXI-131 گشتی

Infineon Technologies CY8C3246AXI-131 is an 8-bit PSoC 3 programmable system-on-chip microcontroller with a 50 MHz 8051 core, 64 KB of embedded flash memory, and 8 KB of SRAM. The device also integrates a 12-bit ADC, configurable digital and analog peripherals, CAPSENSE, and LCD-drive capability in a 100-pin TQFP package measuring 14 x 14 mm.

A PSoC, or programmable system-on-chip, is a mixed-signal microcontroller architecture that combines a CPU, programmable analog blocks, programmable digital blocks, memory, and dedicated peripherals on one silicon device. The CY8C32 family places these functions inside a unified peripheral hub, allowing designs to implement control, acquisition, signal processing, and user-interface functions without relying on several separate discrete controllers.

Principal features include operation from 1.71 V to 5.5 V, 62 I/O pins, a 50 MHz maximum clock, 64K x 8 flash, 8K x 8 SRAM, 2 KB of data EEPROM, and 8 KB of ECC flash. A 12-bit successive-approximation ADC supports analog measurement tasks, while CAPSENSE provides integrated capacitive-sensing support. The controller also includes DMA capability, an interrupt system with 27 sources and eight priority levels, and one peripheral hub with eight parallel access paths.

The 8051-compatible instruction set makes CY8C3246AXI-131 suitable for embedded control systems that need substantial analog and digital configurability rather than a high-performance application processor. Its programmable peripheral architecture permits signal-chain functions and control logic to be organized around the same design, reducing component count and simplifying firmware development for compact control boards.

Typical applications include industrial monitoring equipment, capacitive human-interface panels, LCD-controlled instruments, sensor-conditioning systems, and low-cost embedded controllers. The wide 1.71 V to 5.5 V operating range supports both low-voltage and conventional 5 V system rails, while the 62 available I/O pins allow substantial peripheral connectivity in a single package.

When laying out the PCB, treat analog and digital return paths deliberately and place analog inputs away from high-switching-node traces. Verify the startup and clock configuration in PSoC Creator, and confirm that the selected pin assignments remain compatible with the 100-pin TQFP footprint before releasing artwork.

This page consolidates manufacturer device information, distributor availability details, verified drop-in alternatives, package-specific comparison data, and implementation guidance to support component selection, PCB planning, and sourcing decisions.

جێگرەوەکانی جێگۆڕکێ بۆ CY8C3246AXI-131 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ CY8C3246AXI-131 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە CPU Core, LCD Drive.

Infineon
CPU Core: 8051, 8-bit
LCD Drive: Supported
بەراوردکردن لەگەڵ CY8C3246AXI-131 →

CY8C3246AXA-131

✅ جێگرەوەی ڕاستەوخۆ
📦 100-TQFP (14 x 14 mm)
Same CY8C3246 device and 100-TQFP format, but the AXA ordering variant is listed as obsolete; the AXI variant has the same 64 KB flash and 8 KB SRAM configuration

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

CY8C3246AXI-131 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type 8-bit PSoC 3 programmable system-on-chip microcontroller
CPU Core 8051
Maximum CPU Frequency 50 MHz
Operating Frequency Range DC to 50 MHz
Program Memory 64 KB (64K x 8) flash
RAM 8 KB (8K x 8) SRAM
Data EEPROM 2 KB
ECC Flash 8 KB
ADC Resolution 12 bit
Number of I/O Pins 62
Supply Voltage Range 1.71 V to 5.5 V
Oscillator Type Internal
Interrupt Sources 27 sources with 8 priority levels
Peripheral Hub 1 PHUB with 8 parallel access paths
DMA Controller Yes
CAPSENSE Yes
LCD Drive Yes
پاکێج 100-pin TQFP (14 x 14 mm)
جۆری دامەزراندن Surface mount
Packaging Tray
Flash Protection Levels 4

ڕێنمایی ڕێکخستنی پینی CY8C3246AXI-131 100-pin tqfp (14 x 14 mm)

ڕێکخستنی پین بۆ CY8C3246AXI-131 (پاکێجی 100-pin tqfp (14 x 14 mm)). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 100-pin tqfp (14 x 14 mm) بۆ CY8C3246AXI-131

هیچ داتای وردی پینئاوت بەردەست نییە بۆ CY8C3246AXI-131.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

CY8C3246AXI-131 گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor Monitoring, Capacitive Touch User Interface, LCD-Controlled Test and Measurement, Capacitive-Sense Control Panel, Embedded Sensor Conditioning Hub, Low-Power Environmental Controller.

🏭

Industrial Sensor Monitoring

The CY8C3246AXI-131 suits industrial monitoring controllers because it combines a 50 MHz 8051 core, a 12-bit ADC, 62 I/O pins, and programmable analog and digital peripherals. A sensor interface can acquire analog inputs, perform programmable filtering and conversion, and report results over serial communications without a separate acquisition controller. The 1.71 V to 5.5 V operating range supports both low-voltage sensor circuits and 5 V system logic. Keep analog traces short, isolate them from switching nodes, and validate the ground reference to prevent small ADC signals from being corrupted by digital return currents.

🧩

Capacitive Touch User Interface

CAPSENSE support makes the CY8C3246AXI-131 appropriate for capacitive-touch control panels that also need local processing. The controller can scan touch electrodes, apply configurable filtering and thresholds, and drive an LCD or communicate with a host processor. Its 62 I/O pins provide ample connections for electrodes and display functions, while the 50 MHz core supports responsive control logic. Design the touch electrodes and analog routing carefully because high-capacitance traces, moisture, and adjacent switching circuits can alter the measured sensor baseline.

🖥️

LCD-Controlled Test and Measurement

The CY8C3246AXI-131 can serve as the main controller in a compact measurement instrument that combines signal acquisition, processing, and a local display. Its 12-bit ADC supports analog measurement functions, its LCD-drive capability reduces the need for an external display controller, and the 64 KB flash provides room for calibration tables and application firmware. Use the LCD-drive resources only within their specified electrical and timing limits. Decouple the analog supply locally and route display or keypad signals away from sensitive measurement inputs to preserve accuracy.

📱

Capacitive-Sense Control Panel

The CY8C3246AXI-131 fits a compact capacitive-sense control panel that must scan multiple electrodes, debounce controls, and present status locally. Its 8051 core provides deterministic control-loop execution, and the configurable PSoC blocks reduce the need for separate analog components. The 1.71 V to 5.5 V range allows direct connection to suitable 3.3 V or 5 V peripherals, subject to individual pin limits. Validate electrode geometry, guard traces, and acquisition settings in the manufacturer configuration tool before freezing the PCB.

📡

Embedded Sensor Conditioning Hub

The PSoC architecture allows the CY8C3246AXI-131 to combine sensor excitation, signal conditioning, conversion, and data handling in one device. Its programmable analog blocks, 12-bit ADC, DMA controller, and 8 KB of SRAM are useful for periodic acquisition systems that must move samples without excessive CPU intervention. The 8051 core can supervise the process while DMA transfers data to memory. Choose resistor and capacitor values from the configured analog block, and verify acquisition timing and analog bandwidth against the required sensor response.

🌐

Low-Power Environmental Controller

The CY8C3246AXI-131 can implement compact environmental controllers for temperature, light, air-quality, or occupancy monitoring when a single device must combine sensing and control. Its 1.71 V minimum supply voltage supports low-energy designs, while programmable sleep behavior and DMA can reduce active processing demands. CAPSENSE adds non-mechanical user input without a separate switch network. Validate the sleep currents, wake-up sources, and analog settling behavior in the actual board because leakage from external components may dominate a low-power design.

What is the CY8C3246AXI-131?
The CY8C3246AXI-131 is an Infineon PSoC 3 programmable system-on-chip with an 8-bit 8051 core, 50 MHz maximum operating frequency, 64 KB of flash, and 8 KB of SRAM. It integrates programmable analog and digital peripherals, a 12-bit ADC, CAPSENSE, and LCD-drive functions in a 100-pin TQFP package. The Infineon product page identifies the device as part of the CY8C32 family.
What are the key specifications of CY8C3246AXI-131?
The CY8C3246AXI-131 operates up to 50 MHz and provides 64 KB of flash, 8 KB of SRAM, 2 KB of data EEPROM, and 8 KB of ECC flash. Its supply-voltage range is 1.71 V to 5.5 V, and the device exposes 62 I/O pins in a 100-pin TQFP package. According to the Infineon product page, integrated resources include a 12-bit ADC, CAPSENSE, and LCD drive.
What is the operating voltage of CY8C3246AXI-131?
The CY8C3246AXI-131 operates from 1.71 V to 5.5 V. This range allows the device to function across low-voltage and conventional 5 V supply conditions, although the internal core voltage must remain within the limits stated by the manufacturer datasheet. Confirm power-gating, brownout, and external-clock requirements during hardware design.
Where can I download the CY8C3246AXI-131 datasheet?
The official device page at infineon.com provides access to the CY8C3246AXI-131 datasheet, parameters, and ordering information. It is the preferred source for the complete pin-description table, electrical characteristics, memory map, package dimensions, and errata. Use the manufacturer datasheet rather than a secondary document mirror when assigning PCB nets and configuring the device.
Where can I find the CY8C3246AXI-131 pinout?
The CY8C3246AXI-131 pinout is documented in the pin-description table of the official Infineon datasheet for the 100-pin TQFP package. The device uses a 14 x 14 mm surface-mount footprint with 62 I/O pins plus power and ground connections. Use the manufacturer pin table when assigning analog inputs, LCD outputs, CAPSENSE electrodes, and debug signals.
How many I/O pins and memory does CY8C3246AXI-131 have?
The CY8C3246AXI-131 provides 62 I/O pins, 64 KB of program flash, and 8 KB of SRAM. It also includes 2 KB of data EEPROM and 8 KB of ECC flash for additional nonvolatile storage. Keil's device description also identifies four flash-protection levels and an interrupt system with 27 sources and eight priority levels.
Is the CY8C3246AXI-131 suitable for CAPSENSE and LCD interfaces?
Yes, the CY8C3246AXI-131 includes CAPSENSE and LCD-drive capability according to the Infineon product page. These resources support touch-sensitive controls and segment or matrix LCD user interfaces without requiring separate devices. Performance depends on the selected PSoC configuration, external component values, PCB cleanliness, and the chosen analog system clock.
What is the difference between an 8051 MCU and the CY8C3246AXI-131?
The CY8C3246AXI-131 uses an 8051-compatible core, but it is more than a conventional 8051 microcontroller because it adds programmable analog and digital blocks, DMA, and a peripheral hub to the same device. The result is a configurable mixed-signal controller suitable for applications that would otherwise require an MCU plus separate converters, analog interfaces, and control logic.
What is the best drop-in replacement for CY8C3246AXI-131?
The closest documented same-family alternative is the Infineon CY8C3246AXA-131, which shares the CY8C3246 device identity and 64 KB flash configuration in a 100-TQFP format, but it is listed as obsolete and no longer manufactured. Because package, pin, and temperature-code compatibility must be confirmed in the manufacturer data, verify the ordering tables before treating it as a direct substitute.
Can CY8C3246AXI-131 be replaced by a cross-brand PSoC or MCU?
No verified cross-brand drop-in replacement is identified for the CY8C3246AXI-131. Its combination of a 100-pin TQFP footprint, 8051 core, 64 KB flash, 8 KB SRAM, PSoC programmable peripherals, CAPSENSE, and LCD-drive resources is specific enough that a differently packaged MCU would require board-level changes. Treat cross-brand devices as redesign candidates rather than drop-in replacements.
When should I choose CY8C3246AXI-131 over a conventional 8-bit MCU?
Choose the CY8C3246AXI-131 when a design needs programmable analog and digital blocks, a 12-bit ADC, CAPSENSE, LCD drive, or multiple 8051 peripherals on one device. A conventional 8-bit MCU can be simpler for basic digital control, but it may require additional converters, sensors, touch controllers, and display drivers. The PSoC architecture is most valuable when peripheral configuration flexibility reduces external component count.
Is CY8C3246AXI-131 suitable for industrial monitoring applications?
The CY8C3246AXI-131 is suitable for industrial monitoring designs that need multiple analog inputs, configurable signal conditioning, LCD indication, or touch controls. Its 1.71 V to 5.5 V supply range and 62 I/O pins support broad embedded-control configurations. Industrial suitability must still be assessed for temperature grade, isolation, EMC, and long-term availability requirements.
How do I design the PCB around the CY8C3246AXI-131?
Place the device on a multilayer board with a continuous ground plane, route sensitive analog inputs away from switching nodes, and return analog grounds to a quiet section of the ground plane. The 100-pin TQFP footprint requires fine-pitch fanout and careful via placement between leads. Use the manufacturer package drawing and pin table to define solder-mask and paste apertures.
What tools are compatible with CY8C3246AXI-131 development?
The CY8C3246AXI-131 is supported by the PSoC device family and its 8051-compatible core. The manufacturer supports device configuration, documentation, and programming through its PSoC development environment. Keil also lists the device with its memory, DMA, PHUB, and interrupt resources. Confirm the exact debugger, programmer, and target-board support in the selected toolchain version.
Where can I buy CY8C3246AXI-131 and what is its lead time?
The CY8C3246AXI-131 can be requested through the Request a Quote form on this page, where the requested quantity and delivery requirements can be reviewed. Current unit pricing, stock status, and lead time are confirmed during quotation because availability can change with purchasing volume and production scheduling. Use the manufacturer ordering information to confirm the exact suffix and tray packaging.

داتای سەرچاوەی ئەندازیاری بۆ CY8C3246AXI-131 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the CY8C3246AXI-131 for new designs that require an 8051-compatible core combined with programmable analog and digital blocks, a 12-bit ADC, CAPSENSE, LCD drive, and 62 I/O pins in a 100-pin TQFP package. It is particularly suitable for compact sensor controllers, touch interfaces, and measurement instruments where consolidating peripheral functions can reduce board complexity. The CY8C3246AXA-131 is a documented same-family alternative in the same 100-TQFP format, but its obsolete lifecycle makes it unsuitable for new production without an explicit availability commitment. No verified cross-brand drop-in replacement was identified; an MCU with a different footprint, core, peripheral architecture, or pin assignment should be treated as a redesign rather than a drop-in substitution.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە CY8C3246AXA-131
Brand Infineon Technologies Infineon Technologies
Package 100-TQFP (14 x 14 mm) 100-TQFP (14 x 14 mm)
Product Family PSoC 3 CY8C32 family PSoC 3 CY8C32 family
CPU Core 8051 8051
Maximum Frequency 50 MHz 50 MHz
Flash Memory 64 KB 64 KB
SRAM 8 KB 8 KB
ADC Resolution 12 bit 12 bit
Number of I/O Pins 62 62
Supply Voltage Range 1.71 V to 5.5 V 1.71 V to 5.5 V
Lifecycle Status Active Obsolete and no longer manufactured

جیاکەرەوە سەرەکییەکان

  • Integrated configurable mixed-signal resources (بەراورد بەCY8C3246AXA-131)
  • Active sourcing status (بەراورد بەCY8C3246AXA-131)
  • Broad pin and peripheral integration (بەراورد بەCY8C3246AXA-131)

تێبینییەکانی دیزاین

The 100-pin TQFP footprint requires a continuous ground plane and careful fanout between the fine-pitch leads. Place via fields in the pad escape region where the manufacturer package drawing permits them, and avoid routing signals underneath the device unless the stackup provides a satisfactory reference plane. Confirm pad dimensions, solder-mask apertures, and paste coverage using the official package drawing rather than a generic TQFP footprint.

Separate analog inputs from LCD, CAPSENSE, and digital switching paths. Route each analog input directly toward its configured peripheral pin, and place its external conditioning components close to the device. Use a quiet ground region for analog returns and keep switching-node copper away from the 12-bit ADC area. For capacitive sensing, keep electrode geometry symmetric and provide a grounded guard structure where the configuration tool recommends one.

Do not select a substitute solely because it has a 100-TQFP package. Verify the peripheral hub configuration, analog pin mapping, memory organization, supply limits, and package drawing before replacement. The AXA and AXI ordering suffixes can denote different device or qualification conditions, so confirm the manufacturer ordering table and any required firmware or bootloader compatibility before releasing a replacement into production.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

Compliance declarations were not identified in the manufacturer or distributor information for this device. Confirm RoHS, REACH, halogen-free, and conflict-minerals status using the current manufacturer product documentation before new design release.

داتا پشتڕاستکراوەتەوە لە: 2026-11-19 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

CY8C3246AXI-131 datasheet CY8C3246AXI-131 datasheet pdf CY8C3246AXI-131 pinout CY8C3246AXI-131 specifications CY8C3246AXI-131 100 TQFP Infineon CY8C3246AXI-131 CY8C3246AXI-131 equivalent CY8C3246AXI-131 replacement CY8C3246AXI-131 vs CY8C3246AXA-131 CY8C3246AXI-131 price CY8C3246AXI-131 stock CY8C3246AXI-131 CAPSENSE application

پێکهاتە و زاراوە پەیوەندیدارەکان

Infineon Technologies CY8C3246AXI-131 CY8C3246AXA-131 PSoC 3 CY8C32 family 8051 core microcontroller programmable system-on-chip embedded flash SRAM data EEPROM ECC flash 12-bit ADC CAPSENSE LCD drive DMA controller Peripheral Hub Unit interrupt priority levels 100-TQFP package 14 x 14 mm TQFP surface mount SMD analog-to-digital converter embedded control industrial monitoring
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ