CY8C3446LTI-085 - 50MHz 64KB Flash PSoC 3 MCU | Infineon
MPN: CY8C3446LTI-085 ✓ چالاکCY8C3446LTI-085 گشتی
A programmable system-on-chip integrates a microcontroller core, programmable digital blocks, configurable analog functions, memory, and dedicated peripherals into one device. The PSoC 3 architecture uses an 8051 core with a DMA controller, allowing peripheral transfers to reduce CPU involvement. Its digital fabric routes configurable digital blocks and interrupts, while the analog subsystem supports functions such as ADC conversion, comparators, and analog-to-digital signal conditioning.
The CY8C3446LTI-085 includes 64 KB of flash, 8 KB of SRAM, 2 KB of data EEPROM, and 8 KB of ECC flash according to the device reference information. Its peripheral set includes UART/USART, SPI, I2C, LIN, USB, DMA, LCD, and CapSense functions. Two data pointers and an interrupt system with 27 sources and eight priority levels support responsive control and data-transfer tasks.
The 8051 processor can operate up to 50 MHz, while the PSoC 3 platform also offers low-power operating modes for embedded products that must balance processing capability with energy consumption. Configurable routing allows designers to assign peripheral functions to available pins and implement application-specific interfaces without relying on a large collection of fixed-function peripherals.
Typical uses include industrial temperature and process controllers, connected embedded equipment, user-interface systems with capacitive sensing, USB-enabled data acquisition, and compact consumer or communications products operating from 2.5 V, 3.3 V, or 5 V rails. The 68-pin QFN package also provides numerous general-purpose and communication signals for mixed analog-and-digital designs.
When laying out the board, reserve the exposed pad for thermal dissipation and connect it to the appropriate ground plane according to the manufacturer land-pattern guidance. Keep analog and digital return paths disciplined, provide clean local decoupling at supply pins, and validate signal-routing assignments against the device configuration tables before releasing the PCB design.
This product page combines exact device specifications, drop-in replacement analysis, application guidance, and design considerations to accelerate component selection and PCB implementation for the Cypress Semiconductor PSoC 3 family now supported by Infineon Technologies.
جێگرەوەکانی جێگۆڕکێ بۆ CY8C3446LTI-085 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ CY8C3446LTI-085 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Device Type, CPU Core, Flash Organization, Flash Protection Levels.
CY8C3446LTI-085T
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
CY8C3446LTI-074
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →CY8C3446LTI-085 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | 8-bit PSoC 3 microcontroller |
| Processor Core | 8051, single core |
| زۆرترین فرێکوێنسیی کاتژمێر | 50 MHz |
| Flash Memory | 64 KB (64K x 8) |
| SRAM | 8 KB |
| Data EEPROM | 2 KB |
| ECC Flash | 8 KB |
| Operating Voltage Range | 1.71 V to 5.5 V |
| Supported Supply Configurations | 2.5 V, 3.3 V, and 5 V |
| پاکێج | 68-pin QFN with exposed pad, 8 mm x 8 mm |
| مەودای پلەی گەرمیی کارکردن | -40°C to +85°C |
| Connectivity | EBI/EMI, I²C, LIN, SPI, UART/USART, and USB |
| Programmable Digital Blocks | 24 UDBs |
| Analog Subsystem | 1 configurable ADC unit |
| Peripheral Hub | 1 PHUB with 8 parallel access paths |
| Data Pointers | 2 |
| Interrupt Sources | 27 sources with 8 priority levels |
| Flash Protection Levels | 4 levels |
| جۆری دامەزراندن | Surface mount |
ڕێنمایی ڕێکخستنی پینی CY8C3446LTI-085 68-pin qfn with exposed pad, 8 mm x 8 mm
ڕێکخستنی پین بۆ CY8C3446LTI-085 (پاکێجی 68-pin qfn with exposed pad, 8 mm x 8 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ CY8C3446LTI-085.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
CY8C3446LTI-085 گونجاوە بۆ 6 بەکارھێنانs: Industrial Process Control, Capacitive-Touch User Interface, USB Data Acquisition, USB-Consumer and Communication Equipment, Temperature and Instrumentation, Automotive-Style Body and Peripheral Control.
Industrial Process Control
The CY8C3446LTI-085 fits industrial process-control systems that combine sensor acquisition, control logic, communications, and local diagnostics. Its 8051 core operates up to 50 MHz, while the 24 universal digital blocks allow control functions to be configured rather than spread across multiple fixed peripheral devices. The configurable ADC supports analog measurement, and I2C, SPI, UART/USART, and LIN interfaces connect sensors, actuators, and service equipment. The listed -40°C to +85°C operating range suits industrial environments when the complete system also satisfies its own thermal requirements.
پێشنیارکراو
Capacitive-Touch User Interface
The CY8C3446LTI-085 supports compact touch interfaces because the PSoC 3 device includes CapSense resources alongside its configurable digital blocks. Designers can use the 24 UDBs for touch scanning logic, button interpretation, display sequencing, and communications while the processor manages application state. Its 50 MHz maximum core speed provides headroom for debounce algorithms and graphical feedback, while the 68-pin QFN package exposes enough I/O for buttons, LEDs, and a display interface. Pin assignment and analog layout should follow the PSoC configuration and grounding guidance.
پێشنیارکراو
USB Data Acquisition
The CY8C3446LTI-085 is appropriate for USB-connected acquisition equipment that must acquire analog data and transfer it to a host. Its configurable ADC handles sensor inputs, and the 50 MHz 8051-based processor can preprocess samples before transmission. USB, UART/USART, SPI, and I2C provide multiple paths for host communication and external sensors. With 64 KB of flash and 8 KB of SRAM, the device can combine firmware, calibration data, acquisition routines, and buffering in one controller, reducing the need for separate interface logic.
پێشنیارکراو
USB-Consumer and Communication Equipment
The CY8C3446LTI-085 can serve as the central controller in compact consumer or communications equipment requiring programmable logic and USB connectivity. It supports operation from 1.71 V to 5.5 V, allowing integration with 2.5 V, 3.3 V, and 5 V system rails, while its 64 KB flash accommodates application firmware and configuration. The programmable digital blocks and peripheral routing help tailor the interface to the product, and the 8051 architecture supports established embedded toolchains. The 8 mm by 8 mm QFN package limits board area while requiring careful exposed-pad thermal layout.
پێشنیارکراو
Temperature and Instrumentation
The CY8C3446LTI-085 is well suited to temperature measurement and general instrumentation systems that need configurable signal conditioning, control, and communications. The analog subsystem includes a configurable ADC, while the UDB fabric can implement timers, counters, capture logic, and application-specific functions. UART/USART supports local service consoles or external instruments, and I2C and SPI accommodate sensors and display or memory devices. Its 50 MHz maximum operating rate permits responsive control loops, while 8 KB of SRAM and 64 KB of flash provide adequate resources for acquisition, filtering, and calibration routines.
پێشنیارکراو
Automotive-Style Body and Peripheral Control
The CY8C3446LTI-085 can support compact body and peripheral-control modules that coordinate switches, indicators, sensors, and communication links. Its 24 universal digital blocks provide configurable logic for debouncing, event detection, timing, and signal conditioning, reducing reliance on a separate programmable logic device. LIN and CAN-adjacent system integration can be handled through available serial resources and appropriate external transceivers, while USB or UART enables configuration and diagnostics. The -40°C to +85°C rating covers many industrial and equipment applications, although it does not by itself establish automotive qualification.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ CY8C3446LTI-085 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | CY8C3446LTI-085T | CY8C3446LTI-074 |
|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | 68-pin QFN with exposed pad (8 mm x 8 mm) | 68-pin QFN with exposed pad (8 mm x 8 mm) | 68-pin QFN with exposed pad (8 mm x 8 mm) |
| Processor Core | Single-core 8051 | Single-core 8051 | 8051 |
| Maximum Clock Frequency | 50 MHz | 50 MHz | 50 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB |
| SRAM | 8 KB | 8 KB | 8 KB |
جیاکەرەوە سەرەکییەکان
- Combines programmable digital and analog resources in one controller (بەراورد بەCY8C3446LTI-085T)
- High operating bandwidth for an 8-bit embedded controller (بەراورد بەCY8C3446LTI-074)
- Multiple communication interfaces in one package (بەراورد بەCY8C3446LTI-085T)
- Wide supply compatibility for embedded systems (بەراورد بەCY8C3446LTI-074)
تێبینییەکانی دیزاین
Use the exact 68-pin QFN land pattern and exposed-pad geometry from the manufacturer package drawing. The exposed pad is a thermal and electrical connection, not an optional center pad. Place input and bypass capacitors close to their associated supply pins and preserve a low-impedance path from the exposed pad to the ground plane to reduce die temperature and ground bounce.
Separate sensitive analog routing from fast digital and USB paths where practical. Keep the configurable ADC inputs away from switching-node and high-current return paths, use a continuous ground reference beneath the analog circuitry, and place protection components near connector entries. Validate every PSoC peripheral assignment against the package pin table because configurable routing does not remove the need for electrical pin planning.
Design the supply network for the selected 2.5 V, 3.3 V, or 5 V operating condition and apply the voltage limits and decoupling requirements stated in the manufacturer datasheet. Check startup, brownout, sleep, and active current rather than sizing the rail only for average processing load. Ensure the ground reference and exposed-pad thermal path remain effective across the full -40°C to +85°C temperature range.
Do not treat a similar PSoC 3 order code as an automatic substitution. Confirm the 68-terminal arrangement, exposed-pad connection, memory organization, peripheral mapping, supply limits, and temperature grade. For firmware reuse, also confirm bootloader behavior, configuration data, clock settings, and peripheral routing so that a physically compatible part does not introduce an application-level incompatibility.
زانیاری پابەندبوون
No explicit compliance declarations were identified in the cited device listings. The listed industrial temperature range does not establish AEC-Q100 automotive qualification.