CY8C3665LTI-001 - 67MHz 32KB 8-Bit PSoC 3 MCU | Infineon
MPN: CY8C3665LTI-001 ✓ چالاکCY8C3665LTI-001 گشتی
A PSoC, or programmable system-on-chip, is a mixed-signal microcontroller architecture that places a CPU, programmable digital logic, analog resources, memory, and communication peripherals into one device. This hierarchy places the PSoC 3 family under 8-bit microcontrollers and programmable system-on-chip devices, allowing designers to replace combinations of discrete microcontroller and peripheral ICs with a configurable mixed-signal component.
The CY8C3665LTI-001 provides 32 KB, or 32K x 8 bits, of flash program memory and operates at up to 67 MHz. Its operating voltage is listed from 0.5 V to 5.5 V. The 48-QFN package is based on the HVQCCN package code and includes an exposed pad according to the product listing. These characteristics make the MCU suitable for compact embedded control systems requiring mixed-signal integration and a high operating frequency relative to a conventional 8-bit controller.
The configurable PSoC 3 architecture allows peripheral routing and signal-chain functions to be adapted during device configuration rather than relying entirely on fixed pin-multiplexed functions. This can reduce the number of external components in applications that combine digital control with analog measurement, timing, communication, or signal conditioning. Programming support is identified for the ISP-SWD interface, providing a defined path for firmware programming and debugging.
Typical applications include industrial control panels, sensor-conditioning systems, programmable logic controllers, motor and process-control modules, compact instrumentation, and embedded communications controllers. The 67 MHz clock rate provides additional execution headroom for protocol handling and coordinated peripheral activity, while the 32 KB flash capacity supports application firmware, configuration data, and boot logic.
PCB implementation should account for the exposed thermal pad and preserve the manufacturer's land pattern, copper connection, and decoupling recommendations. Confirm the pin assignment, exposed-pad connection, supported operating voltages, and programming requirements against the manufacturer datasheet before releasing a production layout. This page combines core specifications, application guidance, comparison fields, and practical design notes to support component selection and board development.
The CY8C3665LTI-001 is positioned for designs that need an 8-bit PSoC 3 with 67 MHz performance, 32 KB flash, and a compact 48-QFN footprint. Its principal engineering benefits are mixed-signal configurability, dedicated flash memory, and a high clock rate for a microcontroller in the 8-bit class.
جێگرەوەکانی جێگۆڕکێ بۆ CY8C3665LTI-001 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.
داوای جێگرەوەکان بکەCY8C3665LTI-001 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 8-bit PSoC 3 programmable system-on-chip microcontroller |
| CPU Core | 8051-compatible 8-bit core |
| Maximum Operating Frequency | 67 MHz |
| Flash Memory | 32 KB (32K x 8 bits) |
| Operating Voltage Range | 0.5 V to 5.5 V |
| پاکێج | 48-QFN (7 x 7 mm) |
| Manufacturer Package Code | HVQCCN |
| Package Shape | Square |
| جۆری دامەزراندن | No-lead surface mount |
| Number of Terminals | 48 |
| Exposed Pad | Present |
| Temperature Grade | Industrial |
| Programming Interface | ISP-SWD |
| Programmable Architecture | PSoC 3 with configurable analog and digital peripheral blocks |
| ADC Resolution | 12 bits |
ڕێنمایی ڕێکخستنی پینی CY8C3665LTI-001 square
ڕێکخستنی پین بۆ CY8C3665LTI-001 (پاکێجی square). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ CY8C3665LTI-001.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
CY8C3665LTI-001 گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor Conditioning, Programmable Logic Controller, Embedded Communications Controller, Compact Data-Acquisition Module, Motor and Process Control, Programmable Instrumentation.
Industrial Sensor Conditioning
The CY8C3665LTI-001 fits compact industrial sensor-conditioning modules because its configurable analog and digital peripheral architecture can combine measurement, filtering, thresholding, and control functions around an 8051-compatible core operating up to 67 MHz. The 32 KB flash capacity accommodates acquisition routines, configuration data, diagnostics, and firmware updates. Using the 48-QFN package also preserves a compact board outline, although the exposed pad must be connected according to the manufacturer land pattern. Validate the analog ranges, noise behavior, and calibration strategy for the specific sensor before production.
پێشنیارکراو
Programmable Logic Controller
The CY8C3665LTI-001 is suitable for compact PLC and machine-control modules because the PSoC 3 architecture combines an 8-bit CPU with programmable digital resources and analog peripherals. A 67 MHz operating rate supports protocol processing, state-machine control, and coordinated I/O, while 32 KB flash provides space for the control program and configuration records. The 48-QFN footprint reduces board area compared with larger leaded packages. Firmware should include watchdog, fault-state, and safe-state behavior for every externally controlled output, and production hardware should follow the exposed-pad thermal layout.
پێشنیارکراو
Embedded Communications Controller
The CY8C3665LTI-001 can serve as the control element in an embedded communications module when deterministic timing, serial protocol handling, and compact integration are priorities. The 67 MHz maximum clock rate gives an 8-bit core additional processing headroom, while 32 KB flash can hold communication state machines and protocol handlers. Configurable digital blocks can assist with framing, timing, and signal generation, reducing reliance on separate logic devices. Select external interface levels, isolation, protection, and connectors for the target environment, and confirm timing margins using the production firmware configuration.
پێشنیارکراو
Compact Data-Acquisition Module
The CY8C3665LTI-001 fits a compact data-acquisition module where an 8051-compatible core, configurable analog resources, and 32 KB flash can be combined without a separate microcontroller and peripheral controller. Its 48-QFN package supports dense placement, and the 67 MHz clock can coordinate sampling, filtering, buffering, and host communication. For channels requiring greater accuracy or input range, an external converter may be preferable to internal PSoC analog blocks. Establish calibration, grounding, isolation, and sampling requirements early because firmware configuration alone cannot compensate for unsuitable front-end signal conditioning.
پێشنیارکراو
Motor and Process Control
The CY8C3665LTI-001 is appropriate for local motor or process-control functions where fast timing and configurable control resources are needed in a small package. The 67 MHz PSoC 3 core can execute control loops, manage interlocks, and coordinate pulse outputs, while configurable analog blocks can assist with sensor conditioning. The 32 KB flash provides room for control tables, fault logs, and configurable sequences. Galvanic isolation, protection, output drive, and thermal design remain external to the MCU and must be engineered for the motor, relay, or process load rather than inferred from the controller rating.
پێشنیارکراو
Programmable Instrumentation
The CY8C3665LTI-001 can support compact programmable instrumentation in which measurement, control, and a local user interface share one microcontroller. Its configurable PSoC resources allow analog and digital functions to be tailored instead of fixing every signal path in hardware, while the 32 KB flash stores operating modes, calibration coefficients, and test sequences. The 48-QFN package helps reduce instrument size, and the 67 MHz clock supports responsive control and data transfer. Use the manufacturer electrical limits to select external ADC, reference, display interface, and input-protection components for the required accuracy and safety class.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ CY8C3665LTI-001 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە |
|---|---|
| Package | 48-QFN (7 x 7 mm) |
| Brand | Infineon Technologies |
| CPU Core | 8051-compatible 8-bit core |
| Maximum Frequency | 67 MHz |
| Flash Memory | 32 KB (32K x 8 bits) |
| Operating Voltage | 0.5 V to 5.5 V |
| ADC Resolution | 12 bits |
| Architecture | PSoC 3 with configurable analog and digital peripherals |
| Temperature Grade | Industrial |
| Programming Interface | ISP-SWD |
جیاکەرەوە سەرەکییەکان
- High clock rate within an 8-bit PSoC architecture (بەراورد بەATMEGA1609-MF)
- Configurable mixed-signal integration (بەراورد بەATMEGA48PA-MN)
- Compact exposed-pad package for controlled PCB density (بەراورد بەMKL16Z64VFT4)
تێبینییەکانی دیزاین
Use the exact manufacturer land pattern for the HVQCCN 48-QFN package, including the exposed-pad geometry, solder-mask clearance, and paste pattern. The exposed pad is not optional decoration: follow its electrical and thermal connection instructions and maintain the specified via arrangement. Place decoupling capacitors close to their associated supply pins and route high-current or sensitive return paths to avoid sharing narrow paths with digital switching returns.
Determine the required supply architecture from the manufacturer electrical-characteristics tables before selecting regulators and decoupling. The listed 0.5 V to 5.5 V range does not mean every peripheral or interface can operate across the complete range simultaneously. Account for core voltage, I/O limits, startup sequencing, and the frequency-dependent current requirement when designing the power tree. Verify ripple and settling at the PSoC supply pins rather than relying only on the regulator output specification.
Separate analog inputs, references, and sensitive digital return paths from switching nodes and communication lines. Use a continuous ground reference where possible and place analog filtering components adjacent to the pins they serve. PSoC routing must follow the manufacturer pin-mux and analog-routing guidance because configured peripheral functions can impose constraints on specific balls or pins. Review the final placement against both the pin table and the selected firmware configuration.
Do not treat a family member with a different package as a board-level drop-in replacement. The CY8C3665LTI-044 is listed in a 44-pin TQFP package, whereas the CY8C3665LTI-001 uses a 48-QFN package. Similarly, do not infer ADC performance, temperature limits, or peripheral availability solely from the family name. Check the exact ordering code, pin definitions, electrical limits, and exposed-pad requirements before schematic release or PCB substitution.
زانیاری پابەندبوون
The device is identified as an industrial-temperature microcontroller, but no explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statement appears in the product information. AEC-Q100 is not applicable unless an automotive-qualified ordering variant is separately specified.