Infineon

CY8C3865AXA-018 - 8051 PSoC 67MHz 32KB TQFP-100 | Infineon Technologies

MPN: CY8C3865AXA-018 ✗ کۆتایی ژیان
0.5 V to 5.5 V Vdss 100-TQFP (14 x 14 mm) Package 67 MHz Speed 32 KB Memory
MOQ: 1 |

CY8C3865AXA-018 گشتی

The Infineon Technologies CY8C3865AXA-018 is an 8-bit PSoC 3 CY8C38xx programmable system-on-chip microcontroller with a 67 MHz operating frequency, 32 KB flash memory, and a 100-pin TQFP package. The device belongs to the PSoC family, which combines configurable analog and digital peripherals with embedded flash memory and a microcontroller in a single integrated circuit. Its operating supply range is listed as 0.5 V to 5.5 V.

The CY8C3865AXA-018 is identified as an 8051-compatible 8-bit MCU architecture. Its programmable system-on-chip structure allows selected analog and digital functions to be configured in the device rather than relying on a fixed combination of peripheral functions. This makes the device suitable for embedded designs that need programmable control, signal conditioning, sensing, and communication functions in one package. The 100-pin TQFP package provides a large pin count for external connectivity and mixed-signal implementations.

Key cataloged features include 32 KB of flash, a maximum stated clock frequency of 67 MHz, an 8051 instruction-set architecture, and a 0.5 V to 5.5 V supply range. The part is listed with an LFQFP package code by an aggregator, while the distributor listing describes the package as 100-TQFP in a 14 x 14 mm outline. These package descriptions identify the same general 100-pin gull-wing footprint.

The PSoC architecture can be used for industrial control, sensor interfaces, consumer products, communications equipment, and embedded control systems. Its combination of configurable peripherals and flash-based program storage allows a compact design to integrate control logic with application-specific analog functions. Device selection should also account for the required peripheral configuration, memory capacity, clocking requirements, voltage range, and the availability of the exact package variant.

When designing a board around the CY8C3865AXA-018, use the manufacturer datasheet pin description table to assign every power, ground, programming, clock, analog, and digital signal. The 100-pin package offers many peripheral connections, so accurate pin planning is essential to avoid conflicts between reusable functions. Do not infer a complete pinout from package dimensions or distributor descriptions.

This page combines the manufacturer datasheet reference, distributor catalog information, and the available cross-reference candidates for the CY8C3865AXA-018. It also identifies which replacement candidates require additional verification. The exact lifecycle status, detailed electrical limits, programming model, and manufacturer-approved drop-in alternatives should be confirmed before production release.

جێگرەوەکانی جێگۆڕکێ بۆ CY8C3865AXA-018 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ CY8C3865AXA-018 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Product Type, Package, Core Architecture, Flash Memory, Flash Organization.

Infineon
Product Type: 8-bit 8051-compatible PSoC 3 microcontroller
Core Architecture: 8-bit 8051
Flash Memory: 32 KB (32K x 8)
بەراوردکردن لەگەڵ CY8C3865AXA-018 →
Infineon
Product Type: 8-bit PSoC 3 microcontroller
Package: 100-pin TQFP
Flash Organization: 32K x 8 bits
بەراوردکردن لەگەڵ CY8C3865AXA-018 →

CY8C3865AXI-018

✅ جێگرەوەی ڕاستەوخۆ
📦 100-TQFP (14 x 14 mm)
Same CY8C3865AXA family base designation and listed 100-pin package; suffix-specific temperature or qualification differences are not stated in the catalog records.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

CY8C3665AXA-010

✅ جێگرەوەی ڕاستەوخۆ
Infineon
📦 100-TQFP (14 x 14 mm)
8-bit 8051-compatible PSoC 3 microcontroller · 67 MHz · 32 KB (32K x 8) · 8-bit 8051 · 0.5 V to 5.5 V · 100-TQFP (14 x 14 mm) · Configurable analog and digital peripherals · PSoC 3 CY8C36xx

پەیوەندی بۆ نرخ

بینینی داتاشیت →

CY8C3665AXI-198

✅ جێگرەوەی ڕاستەوخۆ
Infineon
📦 100-TQFP (14 x 14 mm)
8-bit PSoC 3 microcontroller · CY8C36xx · 8051 · 67 MHz · 32 kByte · 32K x 8 bits · 4 kByte · 16

پەیوەندی بۆ نرخ

بینینی داتاشیت →

CY8C3865AXA-018 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type 8-bit programmable system-on-chip microcontroller
Architecture 8051
Series PSoC 3 CY8C38xx
Maximum Stated Frequency 67 MHz
Flash Memory 32 KB
Flash Organization 32K x 8
Supply Voltage Range 0.5 V to 5.5 V
Nominal Supply Voltage 3.3 V
پاکێج 100-TQFP (14 x 14 mm)
Package Code LFQFP
Terminal Count 100
Terminal Form Gull wing
Package Shape Square
Core Architecture 8-bit
Programmable Analog and Digital Peripherals Configurable
Embedded Memory Flash
جۆری دامەزراندن Surface mount

ڕێنمایی ڕێکخستنی پینی CY8C3865AXA-018 square

ڕێکخستنی پین بۆ CY8C3865AXA-018 (پاکێجی square). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی square بۆ CY8C3865AXA-018

هیچ داتای وردی پینئاوت بەردەست نییە بۆ CY8C3865AXA-018.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

CY8C3865AXA-018 گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor and Control Interface, Programmable Analog Sensor Node, Communication Equipment Control, Consumer Device Control, Precision Control and Signal Conditioning, IoT Edge Controller.

🏭

Industrial Sensor and Control Interface

The CY8C3865AXA-018 fits embedded control boards that combine sensing, signal conditioning, and digital control in one processor. Its configurable analog and digital peripherals can support mixed-signal front ends, while the 32 KB flash provides room for application firmware and configuration tables. The 100-pin package is useful when the design requires several external inputs, outputs, and communication connections. Before layout begins, assign the reusable peripheral functions and verify the required signal ranges against the manufacturer electrical-characteristics tables.

🧩

Programmable Analog Sensor Node

The PSoC architecture of the CY8C3865AXA-018 allows configurable analog functions to be combined with an 8051-based controller for compact sensor nodes. Its stated 0.5 V to 5.5 V operating range supports low-voltage systems, while the 67 MHz maximum frequency supports responsive control tasks. The 32 KB flash allows firmware, calibration values, and configuration data to reside locally. Designers should verify converter accuracy, noise, and available analog channels in the manufacturer datasheet before assigning a specific measurement chain.

🌐

Communication Equipment Control

The CY8C3865AXA-018 can serve as the supervisory controller in communications equipment where local sequencing, status monitoring, and configurable input and output functions are required. Its 100-pin TQFP package exposes more connections than a small-outline MCU, supporting external interfaces and discrete peripherals. The 8-bit 8051 architecture and 32 KB flash are appropriate for protocol handling and embedded logic when supported by the selected development tools. Confirm the required serial, timing, and interrupt resources against the device configuration tables before schematic capture.

📱

Consumer Device Control

In a consumer appliance or embedded product, the CY8C3865AXA-018 combines program storage, configurable peripherals, and an 8-bit controller within a single package. The device can manage user inputs, indicators, sequencing, and application-specific signal paths without requiring separate fixed-function peripherals for every task. Its 0.5 V to 5.5 V range accommodates low-voltage logic systems, while the 100-pin package provides extensive routing flexibility. Validate standby behavior, I/O tolerances, and power sequencing because those detailed limits are not established by the distributor catalog.

🔧

Precision Control and Signal Conditioning

The programmable analog and digital blocks in the CY8C3865AXA-018 make it a candidate for control boards that require adaptable signal conditioning. Designers can evaluate amplifier, comparator, timer, serial, or other configurable functions subject to device availability, routing, and performance constraints. A maximum stated clock frequency of 67 MHz supports fast digital tasks, while 32 KB flash supports the associated control firmware. Confirm resource conflicts, interrupt behavior, and peripheral timing in the device configuration documentation before finalizing firmware or board connections.

🧩

IoT Edge Controller

The CY8C3865AXA-018 can function as an edge controller for a connected sensor or actuator module that needs local decision-making before data is transmitted. Its 8051-based 8-bit architecture is suited to compact embedded control, and the 32 KB flash holds device firmware while the configurable peripherals support local input and output handling. The broad 0.5 V to 5.5 V catalog range provides design flexibility across low-voltage rails. Confirm low-power modes, wake-up sources, clock tolerance, and communication peripheral availability before selecting it for battery-operated equipment.

کورتەی بەرهەمە پێشنیارکراوەکان

What is the CY8C3865AXA-018?
The CY8C3865AXA-018 is an Infineon Technologies 8-bit PSoC 3 CY8C38xx programmable system-on-chip microcontroller. It uses an 8051 architecture, operates up to 67 MHz, includes 32 KB of flash, and is supplied in a 100-pin TQFP package. The manufacturer datasheet describes the PSoC 5LP architecture as combining configurable analog and digital peripherals, memory, and a microcontroller in one chip.
What are the key specifications of CY8C3865AXA-018?
The key cataloged specifications for the CY8C3865AXA-018 are a 67 MHz maximum stated frequency, 32 KB of flash memory, an 8051 8-bit architecture, a 0.5 V to 5.5 V supply range, and a 100-pin TQFP package measuring 14 x 14 mm. Distributor listings also identify the package code as LFQFP. Use the manufacturer datasheet for detailed electrical limits, peripheral assignments, and timing parameters.
What is the supply voltage range of CY8C3865AXA-018?
The CY8C3865AXA-018 operates over a listed supply range of 0.5 V to 5.5 V. The distributor catalog also identifies 3.3 V as the nominal supply voltage, which is useful when planning the board's power rail and decoupling. Confirm each power pin's permitted voltage and sequencing requirements against the manufacturer pin-description table before finalizing the power design.
What package does the CY8C3865AXA-018 use?
The CY8C3865AXA-018 uses a 100-pin TQFP package with a 14 x 14 mm outline. The package is also described as LFQFP, with a square shape and gull-wing terminals. For PCB design, use the manufacturer's land pattern and pin-description table rather than relying only on the generic package name, because exposed-pad and thermal details must be confirmed for the exact ordering code.
Where can I find the CY8C3865AXA-018 pinout?
The CY8C3865AXA-018 pinout is found in the manufacturer datasheet's pin-description table. The available catalog information confirms a 100-terminal TQFP package but does not publish a complete numbered signal list. Use that table to identify power, ground, programming, clock, reset, analog, and digital functions, and check reusable peripheral assignments before routing the PCB.
Where can I download the CY8C3865AXA-018 datasheet PDF?
The CY8C3865AXA-018 datasheet can be accessed through the linked manufacturer-family datasheet page for CY8C3865AXA. The document describes the programmable embedded system-on-chip architecture, including configurable analog and digital peripherals, embedded memory, and the microcontroller. Start with the document's device-selection, pin-description, electrical-characteristics, and package-information sections.
Can CY8C3865AXA-018 replace CY8C3865AXI-018?
The CY8C3865AXI-018 is the closest identified candidate for the CY8C3865AXA-018, but the final replacement decision must account for the industrial temperature suffix, qualification status, and exact package details. The available catalog data does not expose a complete pin-to-pin comparison table, so inspect the manufacturer ordering information and datasheet before approving the substitution.
What is the best drop-in replacement for CY8C3865AXA-018?
No manufacturer-approved drop-in replacement is established in the available cross-reference records. The CY8C3865AXI-018 is a close same-family candidate, while CY8C3665AXA-010 and CY8C3665AXI-198 appear in comparison listings, but their peripheral, memory, and qualification differences are not fully stated. Treat them as redesign candidates unless package, pinout, electrical limits, and firmware requirements are verified.
What can replace the CY8C3865AXA-018?
The CY8C3865AXA-018 can be evaluated against the CY8C3865AXI-018, CY8C3665AXA-010, and CY8C3665AXI-198, but no verified five-part drop-in set is established. A valid replacement must use the same 100-pin package, match critical electrical ratings, provide the required peripherals and memory, preserve software-tool compatibility, and meet the application's temperature and qualification requirements.
When should I choose CY8C3865AXA-018 over CY8C3665AXA-010?
Choose the CY8C3865AXA-018 when the design specifically requires the CY8C38xx device family and its documented 67 MHz, 32 KB flash configuration. Choose the CY8C3665AXA-010 only after confirming that its memory, analog and digital peripherals, clocking, pin assignments, and operating limits satisfy the system requirements. The available comparison record does not establish a functional drop-in relationship.
Is CY8C3865AXA-018 suitable for embedded control systems?
The CY8C3865AXA-018 is suitable for embedded control and mixed-signal designs because it integrates configurable analog and digital peripherals with flash memory and an 8051-based microcontroller. Its 100-pin package supports substantial external connectivity, while the 0.5 V to 5.5 V range can serve low-voltage systems. Final suitability depends on the required peripheral mix, response time, memory, and I/O count.
How much flash memory does the CY8C3865AXA-018 have?
The CY8C3865AXA-018 has 32 KB of flash memory, organized as 32K x 8. This embedded program-storage capacity supports firmware, configuration data, and boot or application routines within one microcontroller package. The 8051 architecture and PSoC 3 CY8C38xx family designation should also be considered when selecting the appropriate programming and development toolchain.
Where can I buy CY8C3865AXA-018 online?
Use the Request a Quote form on this page to request CY8C3865AXA-018 availability, lot conditions, and a current quotation. The form supports sourcing without presenting a static price that may become stale. Specify the exact MPN, quantity, and acceptable shipment date when submitting the request.
What is the price of CY8C3865AXA-018?
A current price for the CY8C3865AXA-018 is not stated in the catalog records. Submit a quote request on this page for the exact MPN, quantity, and required delivery terms. Pricing can vary with inventory condition, order quantity, and supply status, so a quotation is the appropriate mechanism for an actionable commercial response.
What is the lead time for CY8C3865AXA-018?
The current manufacturer lead time for the CY8C3865AXA-018 is not stated in the available records. Request the current lead time through the Request a Quote form on this page and include the required quantity and target delivery date. For production planning, also request the lot-level traceability and assembly date.
Is CY8C3865AXA-018 in stock?
Current inventory status for the CY8C3865AXA-018 must be confirmed at the time of quotation because stock levels can change independently of catalog content. Use the Request a Quote form on this page to obtain current availability, quantity allocation, and expected shipment timing for the exact ordering code.
Is CY8C3865AXA-018 the same as CY8C3865AXI-018?
The CY8C3865AXA-018 and CY8C3865AXI-018 are closely related catalog entries, but the suffixes should not be assumed to be interchangeable without checking the ordering table. The suffix may indicate a different temperature or qualification grade. Verify the manufacturer package marking, pin configuration, electrical limits, and operating-temperature range before treating the I variant as a drop-in replacement.
What is the best Infineon equivalent for CY8C3865AXA-018?
The best identified Infineon-family equivalent candidate is the CY8C3865AXI-018 because its base MPN matches the target device and the available records place both in the CY8C3865AXA family context. It must still pass package, pinout, temperature-grade, qualification, and electrical checks. The available records do not establish a manufacturer-approved cross-reference.

داتای سەرچاوەی ئەندازیاری بۆ CY8C3865AXA-018 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the CY8C3865AXA-018 when the design requires the specific CY8C38xx PSoC 3 family, an 8051 8-bit controller, a stated 67 MHz operating frequency, 32 KB of flash, and a 100-pin TQFP footprint. Evaluate CY8C3865AXI-018 first when an alternate ordering suffix is acceptable, but verify its temperature and qualification terms. Consider CY8C3665AXA-010 only after confirming that the required memory, peripherals, timing, and firmware environment are present. CY8C3665AXI-198 is a further family-level option whose -198 suffix and exact resource differences require direct manufacturer-table review. Because the available cross-reference records do not establish a complete manufacturer-approved drop-in list, any substitution should be validated electrically, mechanically, thermally, and in the final tool-generated pin configuration before release.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە CY8C3865AXI-018 CY8C3665AXA-010 CY8C3665AXI-198
Brand Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies
Package 100-TQFP (14 x 14 mm) 100-TQFP 100-TQFP 100-TQFP
Ordering Suffix -018 -I-018 -010 -I-198

جیاکەرەوە سەرەکییەکان

  • Closest identified same-family ordering option (بەراورد بەCY8C3865AXI-018)
  • Higher listed operating frequency than the CY8C3665 comparison family (بەراورد بەCY8C3665AXA-010)
  • Explicit 32 KB flash specification (بەراورد بەCY8C3665AXI-198)

تێبینییەکانی دیزاین

Use the manufacturer land pattern for the 100-pin 14 x 14 mm TQFP package and preserve the specified pin-1 orientation. The large pin count supports many peripheral assignments, but routing mistakes can create conflicts between power, programming, clock, and reusable I/O functions. Complete the pin-assignment table in the device configuration tool before laying out sensitive analog and communication nets.

Plan the power network for the full 0.5 V to 5.5 V catalog range and the nominal 3.3 V operating condition. Verify every power-pin voltage, current limit, decoupling requirement, and startup condition in the manufacturer datasheet. Place local bypass capacitors at the relevant supply pins and keep high-current return paths separate from sensitive analog and digital signal returns.

Do not treat a shared package or family base name as proof of interchangeability. Check the ordering suffix, temperature grade, qualification, peripheral map, interrupt vector, memory organization, and electrical limits for every replacement candidate. Firmware and boot configuration should also be revalidated because programmable PSoC resources can differ even when the package outline is identical.

Separate analog inputs, references, and external sensor connections from switching nodes and fast digital routes. Use a controlled ground strategy and return each signal over a continuous reference plane where practical. Because the 100-pin package can carry several sensitive and high-speed functions, complete pin multiplexing before finalizing component placement and trace geometry.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The manufacturer datasheet should be consulted for the exact ordering code's environmental, material, and qualification declarations. The available catalog records do not explicitly state these compliance attributes.

داتا پشتڕاستکراوەتەوە لە: 2026-11-03 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

CY8C3865AXA-018 datasheet CY8C3865AXA-018 pinout CY8C3865AXA-018 datasheet pdf CY8C3865AXA-018 specifications CY8C3865AXA-018 equivalent CY8C3865AXA-018 replacement CY8C3865AXA-018 cross reference CY8C3865AXA-018 vs CY8C3865AXI-018 Infineon CY8C3865AXA-018 CY8C3865AXA-018 TQFP-100 CY8C3865AXA-018 price CY8C3865AXA-018 stock

پێکهاتە و زاراوە پەیوەندیدارەکان

Infineon Technologies CY8C3865AXA-018 CY8C3865AXI-018 CY8C3665AXA-010 CY8C3665AXI-198 PSoC programmable system-on-chip microcontroller MCU 8-bit microcontroller 8051 architecture configurable analog peripheral configurable digital peripheral embedded flash memory TQFP-100 LFQFP gull-wing package surface-mount package mixed-signal control industrial sensor interface IoT edge controller embedded control system 67 MHz clock 32 KB flash 0.5 V to 5.5 V supply
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ