CY8C5248LTI-030 - 40MHz PSoC 5 MCU with 256KB Flash | Infineon
MPN: CY8C5248LTI-030 ✓ چالاکCY8C5248LTI-030 گشتی
A microcontroller is a compact computing system integrated on one semiconductor die. It includes a processor core, nonvolatile program memory, data memory, peripheral interfaces, and clock and reset resources. The CY8C52 series extends this MCU architecture with PSoC programmable digital blocks, analog blocks, and capacitive-sensing capabilities, allowing peripheral functions to be configured closer to the application requirement than a fixed-function implementation.
The verified product listing identifies the CY8C5248LTI-030 as a 32-bit PSoC 5 CY8C52 microcontroller, a 40 MHz device, and a 256 KB flash MCU. The family description also identifies a large-RAM profile, capacitive-touch control, and display-control support for capacitive-touch human-machine interfaces. These characteristics make the device relevant to industrial panels, touch controls, embedded user interfaces, and compact embedded-control systems where component count and board area matter.
The target part uses a 68-QFN package with an exposed pad and surface-mount construction. Its exact package height, exposed-pad dimensions, temperature range, supply-voltage limits, RAM capacity, peripheral set, and pin assignments require confirmation from the manufacturer documentation. The suffix in the MPN identifies ordering or packaging information, so engineers should compare the full ordering code, exposed-pad land pattern, and electrical limits before treating another member of the CY8C52 family as a replacement.
For PCB design, follow the manufacturer pinout and land-pattern guidance rather than inferring connections from the 68-QFN outline. The exposed thermal pad should use the prescribed land geometry and thermal-via pattern. Because the target supports capacitive touch and display-oriented human-machine-interface functions, analog routing, touch-sensor traces, display interfaces, and power-supply grounding deserve particular attention.
Practical uses include capacitive-touch control panels, display interfaces, industrial operator panels, USB/LIN-oriented embedded controllers, sensor-conditioning systems, and compact consumer interfaces. The ARM Cortex-M3 architecture provides a familiar embedded-control platform, while the programmable PSoC resources can consolidate functions that otherwise require additional discrete or dedicated integrated circuits.
This page consolidates the verified product identity, package information, cross-reference context, application guidance, and design cautions for CY8C5248LTI-030. Confirm current lifecycle, electrical limits, firmware support, and manufacturing status with Infineon before a new production release, and submit an RFQ through the Request a Quote form for current commercial availability.
جێگرەوەکانی جێگۆڕکێ بۆ CY8C5248LTI-030 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ CY8C5248LTI-030 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Product Type, Flash Memory, Flash Organization, Package Type.
CY8C5268LTI-LP030
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
CY8C5248LTI-030 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | PSoC 5 programmable system-on-chip microcontroller |
| Processor Core | ARM Cortex-M3, 32-bit |
| Maximum Operating Frequency | 40 MHz |
| Program Memory | 256 KB flash |
| Flash Organization | 256K x 8 bits |
| RAM Profile | Large-RAM profile |
| Product Series | PSoC 5 CY8C52 series |
| پاکێج | 68-QFN (8 mm x 8 mm) |
| Package Type | QFN with exposed pad |
| جۆری دامەزراندن | Surface mount |
| Capacitive Touch Support | Supported |
| Display Control Support | Supported for capacitive-touch human-machine interfaces |
| Interface Orientation | USB/LIN MCU family positioning |
ڕێنمایی ڕێکخستنی پینی CY8C5248LTI-030 qfn with exposed pad
ڕێکخستنی پین بۆ CY8C5248LTI-030 (پاکێجی qfn with exposed pad). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ CY8C5248LTI-030.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
CY8C5248LTI-030 گونجاوە بۆ 6 بەکارھێنانs: Capacitive-Touch Control Panels, Industrial Human-Machine Interfaces, Display-Control Systems, USB and LIN Interface Controllers, Embedded Sensor Conditioning, Compact Consumer Interfaces.
Capacitive-Touch Control Panels
CY8C5248LTI-030 fits capacitive-touch control panels because the listed device family provides capacitive-touch control, a large-RAM profile, and a 40 MHz ARM Cortex-M3 processor in one 68-QFN package. The MCU can coordinate touch acquisition, debouncing, filtering, user-interface logic, and communication with a display or host controller without requiring a separate touch-controller IC. Its programmable PSoC resources provide a platform for tailoring signal conditioning and control behavior. The principal design consideration is preserving clean analog routing around the touch electrodes while keeping the switching and display interfaces away from sensitive sensing nodes. Confirm the exact touch-channel count, electrode configuration, and recommended external components in the manufacturer datasheet before finalizing the PCB.
پێشنیارکراو
Industrial Human-Machine Interfaces
The CY8C5248LTI-030 is appropriate for industrial human-machine interfaces that combine touch input, display supervision, and local control logic. Its 40 MHz Cortex-M3 core supports responsive state-machine and communication tasks, while the PSoC 5 architecture consolidates programmable digital and analog functions. This can reduce component count compared with a discrete MCU, display interface, and touch controller implementation. In an industrial environment, confirm the device's exact temperature range and EMC requirements, isolate touch traces from noisy power stages, and provide stable filtering and decoupling. The exposed-pad land pattern should follow the manufacturer's thermal and assembly guidance so heat removal remains predictable during continuous panel operation.
پێشنیارکراو
Display-Control Systems
CY8C5248LTI-030 suits display-control systems that need flexible programmable peripherals alongside a conventional embedded processor. The device family is explicitly associated with display-control support for capacitive-touch human-machine interfaces, and its 40 MHz operating speed allows control firmware to refresh interface state and service incoming touch events concurrently. The PSoC programmable blocks can be used to adapt interface timing and signal handling when a fixed peripheral set is insufficient. Designers should budget timing according to the selected display interface and memory configuration, keep display clock and data routes away from touch-sensing networks, and confirm voltage levels and interface availability for the exact CY8C52 device rather than assuming every family member exposes the same signals.
پێشنیارکراو
USB and LIN Interface Controllers
CY8C5248LTI-030 can serve as the central controller in USB/LIN-oriented embedded interfaces, combining a 40 MHz Cortex-M3 core with programmable system resources. The architecture is suitable for translating operator input or sensor status into robust serial communications while handling protocol timing and system-state management in firmware. Interface suitability depends on the exact peripheral complement of the selected ordering code, so verify USB, LIN, voltage, transceiver, and pin-multiplexing requirements in the device documentation. Keep high-current or externally switched loads away from the MCU and sensitive communications, use controlled impedance routing where required, and isolate analog touch or sensing functions from serial edge activity to prevent avoidable signal-integrity issues.
پێشنیارکراو
Embedded Sensor Conditioning
The programmable analog and digital architecture of CY8C5248LTI-030 makes it useful for embedded sensor-conditioning and acquisition systems. Engineers can use PSoC resources alongside the Cortex-M3 core to sample, filter, threshold, and transmit sensor information while maintaining a compact 68-QFN footprint. This integration is valuable in equipment where each additional component increases board area or wiring complexity. Analog performance, channel counts, converter resolution, and operating modes must be taken from the exact device documentation because the abbreviated product listing does not expose those values. Design the analog front end around the manufacturer reference circuit, maintain short and guarded sensor paths, and decouple supply and reference domains to minimize coupling between precision measurements and digital switching.
پێشنیارکراو
Compact Consumer Interfaces
CY8C5248LTI-030 is applicable to compact consumer interfaces that combine capacitive sensing, local logic, and status communications in a space-constrained assembly. Its 8 mm by 8 mm QFN outline and 40 MHz processing capability support responsive product behavior without relying on a larger discrete logic solution. The PSoC 5 family's programmable resources can consolidate functions such as touch detection, indicator control, and communication sequencing. For consumer products, validate the exact ordering suffix, temperature grade, package height, solderability, and lifecycle before committing to a high-volume build. Keep exposed-pad assembly consistent with the manufacturer land pattern, maintain adequate copper and thermal-via coverage, and account for enclosure proximity and human-contact ESD protection in the final system design.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ CY8C5248LTI-030 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | CY8C5268LTI-LP030 |
|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies |
| Package | 68-QFN (8 mm x 8 mm) exposed pad | 68-QFN exposed pad |
| Product Series | PSoC 5 CY8C52 | PSoC 5 CY8C52 |
| Ordering Suffix | LTI-030 | LTI-LP030 |
جیاکەرەوە سەرەکییەکان
- Defined 40 MHz operating point (بەراورد بەCY8C5268LTI-LP030)
- Documented 256 KB flash configuration (بەراورد بەCY8C5268LTI-LP030)
- Large-RAM profile for interface firmware (بەراورد بەCY8C5268LTI-LP030)
- Explicit capacitive-touch and display-control positioning (بەراورد بەCY8C5268LTI-LP030)
تێبینییەکانی دیزاین
Use the manufacturer pin table and exposed-pad land pattern for the 68-QFN rather than constructing the footprint from the 8 mm by 8 mm body dimensions alone. Confirm pad length, width, pitch, solder-mask limits, and exposed-pad connection before release. The verified product listing establishes the package family and exposed-pad construction, but it does not provide the dimensioned land pattern.
Treat the exposed pad as both an assembly and heat-removal feature. Apply the manufacturer-defined thermal-via pattern and retain as much uninterrupted ground copper as the board stack and assembly process permit. Avoid long thermal cuts beneath the pad unless the approved footprint explicitly requires them. Validate junction temperature in the final enclosure because conductive heat from an LCD, power stage, or sealed enclosure can reduce available thermal margin.
Keep capacitive-touch electrodes and analog sensor traces away from switching nodes, high-current return paths, display timing edges, and long unprotected traces. Use the reference layout for external touch components and maintain a consistent ground reference around sensitive analog circuitry. If touch and display functions coexist, test the assembled board across expected cable lengths, enclosure conditions, and interference sources because schematic correctness alone does not establish touch performance.
Do not infer that a related CY8C52 part is interchangeable merely because both use a 68-QFN package. Confirm all 68 electrical functions, flash and RAM requirements, peripheral availability, power behavior, startup configuration, and exposed-pad treatment. For CY8C5268LTI-LP030, the distinct ordering suffix and low-power designation signal that device-specific verification is required before substitution.
زانیاری پابەندبوون
The verified product descriptions do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these attributes for the exact ordering code with Infineon before regulatory submission.