CY8C5468AXI-018 - 67MHz PSoC 5 MCU | Infineon Technologies
MPN: CY8C5468AXI-018 ✓ چالاکCY8C5468AXI-018 گشتی
A PSoC, or programmable system-on-chip, is a mixed-signal MCU architecture that integrates a processor, memory, programmable digital peripherals, analog resources, and dedicated connectivity into one device. It belongs to the hierarchy MCU -> mixed-signal microcontroller -> programmable system-on-chip -> semiconductor. Unlike a general-purpose MCU with a fixed peripheral set, a PSoC allows designers to configure many hardware functions to match the target system.
The CY8C5468AXI-018 provides 256 KB of flash for program storage and 64K x 8 RAM for working memory. Its operation from DC through 67 MHz supports both low-speed control tasks and higher-rate signal-processing workloads. The 60 available I/O pins provide connections for digital interfaces, sensors, actuators, and human-interface functions, while the 100-TQFP package supports conventional surface-mount assembly.
The integrated PSoC architecture gives a design team access to configurable digital blocks and analog peripherals rather than requiring every function to be implemented in external hardware. This can reduce board area and simplify designs that combine control logic with analog measurement or signal conditioning. Firmware and development tools should be selected specifically for the PSoC 5 family and the CY8C54 device group before peripheral configuration or board layout is finalized.
Typical uses include industrial control equipment, sensor acquisition, building automation, communications equipment, motor-control subsystems, and embedded human-interface systems. The combination of 67 MHz processing, 256 KB flash, 64K x 8 RAM, and 60 I/O makes the device useful for multi-function embedded products where fixed-function peripherals alone would be restrictive.
Designers should review the pin-description table, package drawing, power specifications, decoupling requirements, and operating limits in the manufacturer datasheet before committing the PCB. Pay particular attention to the 14 x 14 mm TQFP footprint, exposed programming and debug connections, oscillator arrangement, analog supply requirements, and the allocation of the 60 I/O pins to the selected board functions.
This product page combines the core PSoC 5 specifications with practical application guidance, comparison information, package guidance, and sourcing instructions. It also explains where firmware configuration, PCB validation, and direct manufacturer documentation should be used during design review.
جێگرەوەکانی جێگۆڕکێ بۆ CY8C5468AXI-018 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ CY8C5468AXI-018 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Operating Temperature Range, Product Type, Program Memory.
CY8C5468AXI-018T
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
CY8C5468AXI-LP042
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →CY8C5467AXI-011
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →CY8C5566AXI-061
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →CY8C5468AXI-018 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 32-bit PSoC 5 programmable system-on-chip microcontroller |
| Processor Core | ARM Cortex-M3, 32 bit |
| Maximum Operating Frequency | 67 MHz |
| Operating Frequency Range | DC to 67 MHz |
| Program Memory | 256 KB flash (256K x 8) |
| RAM Memory | 64K x 8 |
| Number of I/O Pins | 60 |
| پاکێج | 100-TQFP, 14 x 14 mm |
| جۆری دامەزراندن | Surface mount |
| Core Architecture | ARM Cortex-M3 |
| Product Series | PSoC 5 CY8C54 |
| Programmable Resource Type | Configurable digital and analog blocks |
| ژمارەی پینەکان | 100 |
| Manufacturer | Infineon Technologies |
ڕێنمایی ڕێکخستنی پینی CY8C5468AXI-018 100-tqfp, 14 x 14 mm
ڕێکخستنی پین بۆ CY8C5468AXI-018 (پاکێجی 100-tqfp, 14 x 14 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ CY8C5468AXI-018.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
CY8C5468AXI-018 گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor Acquisition, Building Automation Controller, Motor Control and Positioning, Communications Gateway, Medical Monitoring Instrument, Programmable Test and Control System.
Industrial Sensor Acquisition
The CY8C5468AXI-018 fits industrial sensor-acquisition equipment that must combine signal measurement, configuration logic, and communication in one controller. Its 67 MHz ARM Cortex-M3 core provides processing headroom for filtering and control, while the programmable analog and digital blocks can support flexible signal paths. The 256 KB flash accommodates firmware for calibration, diagnostics, and protocol handling, and 64K x 8 RAM supports acquisition buffers. The 60 I/O pins leave room for sensors, digital inputs, status indicators, and communications. Review analog ranges, sampling paths, and timing against the manufacturer datasheet before assigning external circuitry.
پێشنیارکراو
Building Automation Controller
The CY8C5468AXI-018 is well suited to building-automation controllers that supervise lighting, HVAC, access, and environmental sensors. Its 60 I/O pins allow multiple digital inputs, relay-control outputs, and bus connections without requiring several auxiliary devices. The 67 MHz Cortex-M3 core can manage protocol stacks and supervisory logic, while 256 KB flash provides room for firmware, schedules, and diagnostic logic. Configurable PSoC blocks add flexibility for timing and signal conditioning. The final design should verify operating-temperature requirements, watchdog behavior, and communication peripheral availability in the manufacturer documentation.
پێشنیارکراو
Motor Control and Positioning
The CY8C5468AXI-018 can serve as the supervisory and real-time controller in positioning, actuator, and motor-control subsystems. At up to 67 MHz, the Cortex-M3 core supports deterministic control loops, while configurable timers and digital blocks can coordinate pulse generation, direction control, and fault handling. Its 256 KB flash and 64K x 8 RAM allow meaningful application code and motion-state storage. The 60 I/O pins support encoders, limit switches, and gate-driver interfaces. Exact timer channels, capture resources, analog limits, and motor-control timing must be confirmed for each board before production release.
پێشنیارکراو
Communications Gateway
The CY8C5468AXI-018 is appropriate for embedded communications gateways that must aggregate serial data, perform protocol conversion, and provide local control. The 67 MHz processor supports responsive packet handling, while 256 KB flash and 64K x 8 RAM provide space for firmware and protocol buffers. The 60 available I/O pins can support UART, SPI, I2C, Ethernet PHY management, status LEDs, and configuration interfaces. For a production gateway, check the exact availability of required communication peripherals and their alternate-function pin assignments. ESD protection, signal isolation, and impedance-controlled interfaces should be designed separately according to the external transceiver requirements.
پێشنیارکراو
Medical Monitoring Instrument
The CY8C5468AXI-018 can support compact medical-monitoring instruments that combine sensor processing, user controls, and data logging. Its configurable analog resources allow signal-chain integration, while the 67 MHz core handles filtering, control, and communication tasks. The 256 KB flash supports application firmware and configuration data, and 64K x 8 RAM can accommodate transient measurement buffers. Its 60 I/O pins simplify connection to sensors, displays, buttons, and isolated serial links. This part should not be treated as an automatically approved medical component; the complete instrument must satisfy the applicable safety, isolation, validation, and regulatory requirements for its intended use.
پێشنیارکراو
Programmable Test and Control System
The CY8C5468AXI-018 fits programmable test, measurement, and control systems where reusable analog and digital resources simplify instrument design. Its 67 MHz processing core can sequence tests and calculate results, while the configurable PSoC blocks support custom timing, signal conditioning, and control paths. With 256 KB flash and 64K x 8 RAM, the device can host firmware, test sequences, and local data buffers. The 60 I/O pins provide flexible connectivity to test fixtures, trigger interfaces, and communication ports. Engineers should map each fixture signal to a verified peripheral and pin function, then validate timing, grounding, input protection, and calibration procedures on the assembled hardware.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ CY8C5468AXI-018 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | CY8C5468AXI-018T | CY8C5468AXI-LP042 | CY8C5467AXI-011 | CY8C5566AXI-061 |
|---|---|---|---|---|---|
| Package | 100-TQFP (14 x 14 mm) | 100-TQFP (14 x 14 mm) | 100-TQFP (14 x 14 mm) | 100-TQFP (14 x 14 mm) | 100-TQFP (14 x 14 mm) |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Product Type | PSoC 5 mixed-signal microcontroller | CY8C5468 PSoC 5 mixed-signal microcontroller | CY8C5468 PSoC 5 mixed-signal microcontroller | CY8C54 PSoC 5 mixed-signal microcontroller | PSoC 5 mixed-signal microcontroller |
| Number of Package Pins | 100 | 100 | 100 | 100 | 100 |
| Special Ordering Suffix | -018 | -018T | -LP042 | -011 | -061 |
جیاکەرەوە سەرەکییەکان
- Higher identified operating frequency than the related -011 device configuration (بەراورد بەCY8C5467AXI-011)
- Exact CY8C5468 base-device identity with a distinct ordering suffix (بەراورد بەCY8C5468AXI-018T)
- Target PSoC 5 configuration combines a fast core with substantial memory (بەراورد بەCY8C5566AXI-061)
تێبینییەکانی دیزاین
Design the PCB around the 100-TQFP, 14 x 14 mm footprint and verify the land pattern against the package drawing in the manufacturer datasheet. Place decoupling capacitors close to the applicable supply pins, keep high-current return paths compact, and reserve the programming and debug signals specified by the PSoC 5 hardware design guidance. Because the product has 60 I/O pins, a pin-assignment matrix should be maintained before schematic capture to prevent conflicts between peripheral functions.
Keep sensitive analog inputs away from switching nodes, high-current motor-drive traces, oscillators, and digital clock lines. Use a continuous ground reference beneath the device and follow the manufacturer’s recommendations for analog and digital supply partitioning. When the configurable analog blocks are used, establish return paths and filtering around each external analog component early in layout; changing these paths late can degrade noise performance and force schematic revisions.
Calculate the regulator capacity from the selected PSoC 5 clock configuration, enabled peripherals, and I/O load rather than from the 67 MHz headline frequency alone. Provide the supply voltages and decoupling network specified in the CY8C54 family datasheet, and confirm that each power rail remains within its operating range at maximum clock and peripheral activity. Estimated: peak regulator demand must include processor current, analog blocks, external loads, and allowable startup margin because those values are not published in the product summary.
Do not treat a related CY8C54 or PSoC 5 MPN as an automatic drop-in replacement. The device suffix can affect speed grade, temperature range, qualification, packing, and available resources even when the package looks identical. Before substitution, compare the numbered pin table, power pins, analog channels, clock pins, programming interface, timers, memory size, and peripheral multiplexing. Record any changed function in firmware so the replacement does not silently alter board behavior.
زانیاری پابەندبوون
The manufacturer documentation and ordering-code records must be consulted for the current RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status of the exact suffix.