DP83640TVV - IEEE 1588 Ethernet PHY | Texas Instruments
MPN: DP83640TVV ✗ کۆتایی ژیانDP83640TVV گشتی
An Ethernet physical-layer transceiver is the circuit that connects a digital controller or processor to a copper Ethernet network. It performs signal encoding, transmission, reception, and recovery across the physical network medium. The DP83640 belongs to the broader hierarchy of Ethernet PHY transceiver, network interface IC, communication interface, and semiconductor product categories, with IEEE 1588 precision-time-protocol support extending the device beyond ordinary data communication.
The verified product information identifies one PHY channel, 10 Mbps and 100 Mbps operation, a 3.3 V supply, and a 48-LQFP package. These characteristics make the DP83640 suitable for industrial Ethernet equipment that needs synchronized clocks across multiple endpoints. The manufacturer describes the device as providing accurate and reliable performance for industrial automation and communication systems, where deterministic timing is important for coordinating machines, sensors, controllers, and communications infrastructure.
DP83640TVV is ordered under the full Texas Instruments part number DP83640TVV/NOPB in the retrieved distributor records. The NOPB suffix identifies the ordering configuration supplied for evaluation and non-production or Pb-free-exempt applications; the exact program status and purchasing conditions should therefore be confirmed with the manufacturer. The supplied data does not establish the maximum synchronization error, cable-length reach, media types, clock-frequency range, or detailed electrical timing limits.
Typical use cases include factory-automation networks, industrial Ethernet bridges, synchronized sensor systems, industrial switches, communication equipment, and test systems that coordinate events using a common time reference. Its 10/100 Mbps capability can fit legacy 100BASE-TX infrastructure, although engineers should confirm modern network requirements before selecting it for new high-bandwidth systems. IEEE 1588-capable PHY hardware can reduce software complexity by supporting physical-layer timestamp and synchronization functions, but end-to-end timing accuracy also depends on the host clock, network topology, cables, switches, and application firmware.
The main design consideration is to preserve the precision-timing path from the PHY clocks to the system timebase. Use a low-jitter reference source, provide the decoupling and clock connections specified by the manufacturer, and verify propagation delay and timestamp behavior across every switch and cable segment. The retrieved information does not provide the complete 48-pin mapping, so the official pin list must be consulted before PCB routing or prototype assembly.
This product record combines verified manufacturer and distributor facts with an explicit engineering assessment of where precision time synchronization matters. It also documents unavailable price, lead-time, pinout, and detailed timing data rather than presenting unverified figures as guaranteed specifications.
جێگرەوەکانی جێگۆڕکێ بۆ DP83640TVV — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ DP83640TVV (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Product Type, Supply Voltage, Host Interface, Operating Temperature Range, Package Type.
DP83640TVV/NOPB
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →DP83640TVV تایبەتمەندییەکان
| Product Type | IEEE 1588 precision-time-protocol Ethernet PHY transceiver |
| Ethernet Channel Count | 1 channel |
| Supported Data Rates | 10 Mbps and 100 Mbps |
| ڤۆڵتیەی دابینکردن | 3.3 V |
| Timing Protocol | IEEE 1588 precision time protocol |
| مەودای پلەی گەرمیی کارکردن | -40°C to 85°C |
| Package Type | 48-pin LQFP (PT) |
| Package Body Size | 7 mm × 7 mm |
| جۆری دامەزراندن | Surface Mount |
| Device Category | Ethernet physical-layer transceiver |
| Application Category | Industrial automation and communication systems |
| Lead-Free Ordering Suffix | NOPB |
ڕێنمایی ڕێکخستنی پینی DP83640TVV 7 mm × 7 mm
ڕێکخستنی پین بۆ DP83640TVV (پاکێجی 7 mm × 7 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ DP83640TVV.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
DP83640TVV گونجاوە بۆ 6 بەکارھێنانs: Industrial Automation Timing, Synchronized Sensor Networks, Industrial Ethernet Gateways, Precision Test and Measurement, Synchronized Communication Equipment, Machine Vision and Inspection.
Industrial Automation Timing
The DP83640TVV fits industrial automation networks that must coordinate controllers, sensors, actuators, and production equipment against a common time reference. Its verified IEEE 1588 capability, single-channel 10/100 Mbps operation, and -40°C to 85°C rating support industrial Ethernet designs that require synchronized events rather than ordinary best-effort data transfer. The PHY is placed between the host controller and the twisted-pair network, with the manufacturer reference layout used for clock, power, and signal routing. Because the retrieved data does not specify maximum synchronization error or cable reach, engineers should validate timing across the complete topology, including switches, cable lengths, and endpoint firmware. This device is most appropriate when deterministic coordination provides more value than a higher Ethernet data rate.
Synchronized Sensor Networks
The DP83640TVV is suitable for distributed sensor installations in which measurements from multiple locations must be correlated by time. IEEE 1588 precision-time-protocol support provides the physical layer for synchronized Ethernet timing, while the verified 10/100 Mbps rate is adequate for many measurement and control payloads. Each sensor node can use the DP83640 for network connectivity and timing assistance, provided the host provides a stable reference clock and the network switches preserve required timing messages. The -40°C to 85°C operating range also covers many industrial environments. Before deployment, engineers should verify actual timestamp accuracy, propagation-delay symmetry, and behavior across the selected cabling and switching infrastructure because those values were not present in the retrieved data.
Industrial Ethernet Gateways
The DP83640TVV can provide a synchronized Ethernet connection for gateways that bridge legacy industrial equipment with higher-level control networks. Its 3.3 V supply and single 10/100 Mbps channel align with embedded controller interfaces that need a deterministic physical layer without a high-speed transceiver. IEEE 1588 support can help the gateway exchange time information with remote equipment, supporting coordinated alarms, logs, and machine events. The principal design work is matching the PHY clock interface to the host processor and configuring the device consistently across both ends of the link. Because the supplied information does not identify supported media types or maximum reach, engineers must consult the manufacturer datasheet for cable, magnetics, termination, and layout requirements before approving the network design.
Precision Test and Measurement
The DP83640TVV is appropriate for test and measurement equipment that must trigger acquisitions or analyze events according to a shared timebase. The IEEE 1588 precision-time-protocol capability can reduce the burden of synchronizing separate instruments over Ethernet, while 10/100 Mbps networking is sufficient for transferring commands and moderate data volumes. A practical system uses the DP83640 to connect each instrument to a common timing topology, with the host software verifying offset and path delay rather than relying only on the presence of the PHY. The supplied data does not state timestamp resolution, jitter performance, or supported synchronization modes, so those characteristics must be measured during evaluation and confirmed in the current manufacturer documentation.
Synchronized Communication Equipment
The DP83640TVV supports communication systems that require aligned clocks across distributed protocol processors, remote gateways, or monitoring nodes. Its verified single-channel 10/100 Mbps Ethernet capability fits legacy industrial communication infrastructure, while IEEE 1588 support assists with time alignment between endpoints. This can be useful in systems where log ordering, event correlation, or coordinated transmissions depend on accurate timestamps. Designers should select magnetics and cable components according to the manufacturer guidance, provide clean power and reference-clock connections, and confirm that intermediary network equipment supports the required precision-time messages. The 48-LQFP package supports compact designs, but its exact 48-pin assignment was not supplied and must be verified before routing.
Machine Vision and Inspection
The DP83640TVV can serve networked machine-vision and inspection stations that need synchronized image acquisition, motion commands, and inspection results. IEEE 1588 timing support can help coordinate multiple cameras, motion controllers, and programmable logic controllers over Ethernet, while the 10/100 Mbps channel can carry configuration and status traffic. The device should be evaluated against the required data bandwidth: high-resolution image streams may demand faster PHYs even when timing synchronization is handled separately. For suitable low-bandwidth control traffic, the DP83640 offers a focused solution with an industrial temperature range of -40°C to 85°C. Validate end-to-end synchronization and image-trigger jitter on the final network, because the retrieved data provides no quantified accuracy or latency values.
داتای سەرچاوەی ئەندازیاری بۆ DP83640TVV — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە |
|---|---|
| Package | 48-LQFP (PT), 7 mm × 7 mm |
| Brand | Texas Instruments |
| Ethernet Channel Count | 1 channel |
| Supported Data Rates | 10 Mbps and 100 Mbps |
| Supply Voltage | 3.3 V |
| Timing Protocol | IEEE 1588 precision time protocol |
| Operating Temperature Range | -40°C to 85°C |
| Mounting Type | Surface Mount |
جیاکەرەوە سەرەکییەکان
- IEEE 1588-aware physical layer (بەراورد بەLAN8720A)
- Single-channel 10/100 Mbps Ethernet connectivity (بەراورد بە88E1512)
- Industrial temperature operation (بەراورد بەBCM5241)
تێبینییەکانی دیزاین
Route the Ethernet differential pairs as a controlled impedance pair and follow the current TI DP83640 reference layout for magnetics, termination, and connector placement. The retrieved data confirms a 48-LQFP device but does not provide the pin map or recommended layout, so these details must be taken from the manufacturer datasheet rather than reconstructed from generic Ethernet guidance.
Preserve the quality and stability of the PHY reference clock because oscillator phase noise and jitter can influence timestamp quality. Use the component and connection strategy specified by TI, keep the clock path short, and avoid routing it adjacent to high-current switching nodes. Validate clock amplitude, frequency, and startup behavior at the assembled-board level rather than relying only on simulation.
Do not treat an ordinary Ethernet PHY as a pin-compatible substitute for DP83640TVV. The retrieved cross-reference candidates include different packages, data rates, and timing features, while DP83640TVVX/NOPB may differ by an ordering suffix. Confirm pin functions, electrical limits, clock architecture, and IEEE 1588 behavior with TI before approving any substitution or changing the NOPB configuration.
Decouple the 3.3 V supply as specified by the manufacturer and keep the power-return path continuous under the PHY and associated magnetics. Since no detailed capacitance, voltage tolerance, or current limits were present in the retrieved source data, use the current datasheet values for capacitor selection, ripple tolerance, and sequencing rather than deriving them from generic 10/100 Mbps PHY examples.
زانیاری پابەندبوون
The retrieved results identify the NOPB ordering suffix, but they do not provide extracted compliance statements for this specific device. Compliance status must be confirmed from the current TI product page or declaration.