DS1338Z-18+ I2C RTC with 56-Byte NV SRAM | Analog Devices
MPN: DS1338Z-18+ ✗ کۆتایی ژیانDS1338Z-18+ گشتی
A real-time clock is a clock-and-calendar integrated circuit that maintains time independently of a host processor. Within the broader semiconductor hierarchy, the DS1338Z-18+ is an RTC within the clock and timing category of integrated circuits. Its serial interface reduces wiring requirements compared with a parallel calendar device, while the integrated BCD clock simplifies time representation and allows software to process familiar date and time values.
The principal features include a full BCD clock and calendar, automatic month-end adjustment for months with fewer than 31 days, and 56 bytes of NV SRAM. The I2C interface transfers address and data serially, making the device suitable for embedded systems that already use shared two-wire buses. Its 1.71 V to 5.5 V supply range supports both lower-voltage and conventional 5 V system rails. The 8-pin NSOIC package is designed for compact surface-mount PCB layouts.
The DS1338 architecture combines a dedicated timekeeping section with accessible nonvolatile storage in one package. Calendar data includes seconds, minutes, hours, day, date, month, and year, and the device automatically adjusts the end-of-month date when a month contains fewer than 31 days. Because the target DS1338Z-18+ is specified for an 18 variant within the DS1338 family, engineers should confirm the exact temperature and order-code requirements against the manufacturer data before releasing production quantities.
Typical uses include industrial controllers, data-acquisition equipment, instrument panels, embedded telemetry, access-control terminals, and compact consumer appliances. The RTC is especially useful when the main controller can be reset or powered down but the system must retain a credible wall-clock time and a small amount of state. Systems that also need larger nonvolatile storage should use the RTC for timekeeping and add a separate serial flash or EEPROM device.
PCB implementation should provide a stable supply and clean ground return because oscillator-based timekeeping accuracy can be affected by electrical noise and poor layout. Keep the I2C traces short, route them away from noisy switching nodes, and follow the manufacturer’s recommended bypass-capacitor arrangement. Firmware should detect communication faults and treat the RTC as a backup time source when validating calendar fields after a power interruption.
This page consolidates verified manufacturer and distributor information, package details, sourcing data, design guidance, and same-family replacement candidates. It distinguishes confirmed public facts from specifications that still require confirmation from the complete manufacturer data sheet, helping engineers make a faster and more defensible sourcing decision.
جێگرەوەکانی جێگۆڕکێ بۆ DS1338Z-18+ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ DS1338Z-18+ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Serial Interface, Mounting Type, Product Type, Supply Voltage Range.
DS1338Z-18
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
DS1338Z-3+
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →DS1338U-18+
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
DS1338Z-18+ تایبەتمەندییەکان
| Product Type | I2C serial real-time clock and calendar |
| Nonvolatile RAM | 56 byte |
| Time Format | Full binary-coded decimal (BCD) |
| Calendar Fields | Seconds, minutes, hours, day, date, month, and year |
| Operating Voltage Range | 1.71 V to 5.5 V |
| Serial Interface | I2C, 2-wire |
| پاکێج | 8-pin NSOIC |
| Package Width | 3.90 mm |
| جۆری دامەزراندن | Surface mount |
| Automatic Month Adjustment | Supported for months with fewer than 31 days |
ڕێنمایی ڕێکخستنی پینی DS1338Z-18+ 3.90 mm
ڕێکخستنی پین بۆ DS1338Z-18+ (پاکێجی 3.90 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ DS1338Z-18+.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
DS1338Z-18+ گونجاوە بۆ 6 بەکارھێنانs: Industrial Data-Acquisition Equipment, Embedded Security and Access-Control Terminals, Instrumentation and Measurement Products, Connected Telemetry and Remote Monitoring, Battery-Powered Portable Devices, Consumer Appliances and HMI Panels.
Industrial Data-Acquisition Equipment
The DS1338Z-18+ fits industrial data-acquisition systems that must retain timestamps across controller resets or short power interruptions. Its 1.71 V to 5.5 V operating range supports low-voltage and 5 V rails, while the full BCD calendar records seconds through year for correlation with sensor and process data. The 56-byte NV SRAM can hold a small calibration record, device counter, or configuration checksum. Place the device near the controller’s I2C bus, use a stable supply, and validate calendar fields after startup because the RTC should be treated as a recoverable time source rather than assumed infallible.
پێشنیارکراو
Embedded Security and Access-Control Terminals
The DS1338Z-18+ is appropriate for access-control readers and security terminals that need event timestamps even when their main embedded controller is reset. The I2C interface minimizes added wiring, while the 56-byte NV RAM can preserve a transaction counter, terminal identifier, or short configuration block. Its 8-pin NSOIC package is compatible with compact surface-mount assemblies. Firmware should check the BCD calendar and device presence on every boot, synchronize time when connectivity is available, and avoid performing time-critical access decisions until the RTC has passed validation.
پێشنیارکراو
Instrumentation and Measurement Products
The DS1338Z-18+ supports laboratory and field instruments that must display local time, stamp measurements, and preserve a small amount of operating state. Its full BCD clock provides directly usable calendar fields, and the 1.71 V minimum operating voltage supports low-power instrument subsystems. The 56-byte NV SRAM is not a replacement for bulk data storage, but it can retain instrument configuration, calibration flags, or an event counter. For accurate measurements, isolate I2C routing from switching converters and analog front ends, and verify timekeeping stability over the intended temperature range.
پێشنیارکراو
Connected Telemetry and Remote Monitoring
The DS1338Z-18+ fits remote telemetry equipment that records the time of alarms, sensor samples, or maintenance events between network connections. Its nonvolatile calendar state provides a local time reference when communications are unavailable, and the serial interface allows the host controller to read or update it efficiently. The 56-byte NV RAM can store a communications retry counter or compact operating state. Firmware should synchronize the clock against a trusted network time source when available and include a validity flag so stale or uninitialized calendar values are not mistaken for current timestamps.
پێشنیارکراو
Battery-Powered Portable Devices
The DS1338Z-18+ can support portable appliances, trackers, and compact controllers that require calendar time and limited retained data across main-rail interruptions. Its 1.71 V to 5.5 V range offers flexibility for low-energy rails, while the I2C bus reduces the number of host connections. The 56-byte NV SRAM is suitable for small configuration records rather than large application data. Before finalizing a battery-powered design, obtain the operating and backup-current values and calculate the expected retention lifetime using the exact backup source and load conditions.
پێشنیارکراو
Consumer Appliances and HMI Panels
The DS1338Z-18+ is suitable for appliance control boards and human-machine interfaces where schedules, timers, and event logs depend on a persistent clock. The full BCD calendar supports daily scheduling, while the NV SRAM can preserve a small set of operating flags or user preferences. The 8-pin NSOIC format reduces board area compared with larger packages. Designers should reserve the manufacturer-recommended decoupling and keep I2C routing short, particularly in appliances containing relays, motor drives, or display backlights that can introduce electrical noise.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ DS1338Z-18+ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | DS1338Z-18 | DS1338Z-3+ | DS1338U-18+ |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 8-SOIC / 8-pin NSOIC | 8-SOIC - same package family | 8-SOIC - same package family | 8-SOIC - same package family |
| Product Type | I2C real-time clock and calendar | I2C real-time clock and calendar | I2C real-time clock and calendar | I2C real-time clock and calendar |
| Nonvolatile RAM | 56 byte | 56 byte | 56 byte | 56 byte |
| Interface | I2C, 2-wire serial | I2C, 2-wire serial | I2C, 2-wire serial | I2C, 2-wire serial |
| Calendar Format | Full BCD clock and calendar | Full BCD clock and calendar | Full BCD clock and calendar | Full BCD clock and calendar |
| Month-End Adjustment | Automatic for months with fewer than 31 days | Supported by DS1338 family | Supported by DS1338 family | Supported by DS1338 family |
| Order-Code Difference | 18+ suffix | Base 18 suffix; no numeric difference supplied | 3+ suffix; no numeric difference supplied | U-18+ suffix; no numeric difference supplied |
جیاکەرەوە سەرەکییەکان
- Combines RTC calendar and nonvolatile storage in one compact device (بەراورد بەDS1338U-18+)
- Verified distributor price reference (بەراورد بەDS1338Z-18)
- Wide confirmed operating-voltage range (بەراورد بەDS1338Z-3+)
تێبینییەکانی دیزاین
Implement the manufacturer-recommended supply decoupling and place the capacitor close to the device power pins. Keep the I2C clock and data traces short, route them away from relays, switching-regulator outputs, and high-current return paths, and use the pull-up arrangement specified in the manufacturer application information. A compact RTC package does not make the surrounding layout electrically simple: return-current discontinuities and supply noise can degrade timekeeping or communication reliability even when the schematic connections are correct.
Calculate backup-system power consumption from the verified operating, backup, and leakage currents before defining the battery or energy-storage budget. The 1.71 V to 5.5 V supply range does not establish equivalent current consumption across that range, and the 56-byte NV SRAM does not by itself guarantee retention without the required backup supply. Validate startup, brownout, and power-loss behavior in hardware, and preserve a valid-time flag in nonvolatile system state so firmware can distinguish a valid RTC value from an uninitialized calendar.
Do not treat a similar DS1338 suffix as automatically interchangeable without reviewing the complete ordering table. DS1338Z-18, DS1338Z-3+, and DS1338U-18+ are confirmed related candidates, but the supplied evidence does not quantify every temperature, package, or qualification difference. Also avoid assuming that all 56 RAM bytes are freely usable without checking the manufacturer register map, access rules, and any write-cycle behavior in the official DS1338-DS1338Z data sheet.
Use the I2C bus timing and pull-up values from the complete manufacturer data sheet rather than generic values copied from another RTC. Account for bus capacitance, pull-up current, and the operating voltage of every attached device. Firmware should detect a missing or unresponsive RTC, validate BCD bounds for seconds, minutes, hours, date, month, and year, and establish whether the clock is uninitialized before using its timestamp. This prevents corrupted calendar values from propagating into logs and scheduled operations.
زانیاری پابەندبوون
The supplied verified snippets identify the device as an I2C RTC with 56-byte NV SRAM but do not provide explicit compliance declarations. Compliance fields remain unknown rather than inferred.