Silicon Labs

EFM32TG110F16-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs

MPN: EFM32TG110F16-QFN24 ✓ چالاک
1.85 V to 3.8 V Vdss 24-QFN, 5 x 5 mm Package 32 MHz Speed 16 kB Memory
MOQ: 1 |

EFM32TG110F16-QFN24 گشتی

The Silicon Labs EFM32TG110F16-QFN24 is an ARM Cortex-M3 32-bit microcontroller rated up to 32 MHz, with 16 kB of Flash memory and 4 kB of RAM in a 24-QFN 5 x 5 mm surface-mount package. The device includes 17 digital I/O pins, two 16-bit timers, AES and operational-amplifier functions, and operates from a 1.85 V to 3.8 V supply range.

A microcontroller is a programmable system-on-chip combining a processor core, nonvolatile program memory, volatile working memory, and peripherals such as timers, communication interfaces, analog blocks, and general-purpose I/O. The EFM32 Tiny Gecko family belongs to the 32-bit embedded MCU hierarchy and is designed for battery-operated and energy-sensitive equipment. Its Cortex-M3 architecture supports efficient control processing while the low-energy platform emphasizes short wake-up times and energy-saving modes.

The principal features of the EFM32TG110F16-QFN24 include its 32 MHz operating speed, 16 kB Flash program storage, 4 kB RAM, 17 digital I/O pins, and two 16-bit timers. The manufacturer also identifies AES hardware and an operational amplifier among the device capabilities. Its 24-QFN package includes an exposed pad and measures 5 x 5 mm, supporting compact designs where board area and supply current are important constraints.

Technically, the part combines an ARM Cortex-M3 instruction set with Silicon Labs low-energy techniques. The 1.85 V to 3.8 V operating range accommodates low-voltage embedded systems, including systems powered from a regulated 3.3 V rail or suitable battery-derived supply. Flash memory provides durable firmware storage, while the 4 kB RAM supports working state, stack operations, buffers, and peripheral data handling. The 17 digital I/O pins allow external sensors, indicators, controls, and communication devices to be connected without relying entirely on dedicated peripherals.

Typical applications include low-power sensor nodes, wearable electronics, compact industrial controls, battery-powered instruments, connected IoT equipment, and small control modules. The device is particularly appropriate where frequent wake-up, low idle consumption, fast control response, and local processing are more important than large memory capacity.

Designers should follow the manufacturer datasheet for the complete QFN-24 pin map, exposed-pad connection, decoupling requirements, and GPIO limitations. Because the exposed pad is part of the thermal and electrical design, the PCB should provide suitable copper and a recommended land pattern. Firmware configuration, clock setup, and peripheral initialization must also follow the EFM32 Tiny Gecko reference material.

This product overview combines the manufacturer device specifications with practical selection criteria, application guidance, package considerations, and clearly identified alternatives. It helps engineers determine whether the EFM32TG110F16-QFN24 provides sufficient processing speed, memory, I/O, and low-voltage operation for a compact embedded design before beginning layout and firmware development.

جێگرەوەکانی جێگۆڕکێ بۆ EFM32TG110F16-QFN24 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ EFM32TG110F16-QFN24 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Flash Memory, Package, Architecture, Processor Core, Digital I/O Pins.

Silicon Labs
Flash Memory: 16 KB (16K x 8 bits)
Package: 24-QFN (5 x 5 mm)
Architecture: ARMv7-M
بەراوردکردن لەگەڵ EFM32TG110F16-QFN24 →
Silicon Labs
Package: 24-QFN (5 mm x 5 mm)
Architecture: 32-bit RISC
Digital I/O Pins: 17
بەراوردکردن لەگەڵ EFM32TG110F16-QFN24 →
Silicon Labs
Flash Memory: 32 KB
Package: 24-QFN, 5 mm × 5 mm
Digital I/O Pins: 17
بەراوردکردن لەگەڵ EFM32TG110F16-QFN24 →
Silicon Labs
Flash Memory: 4 kB
Architecture: 32-bit RISC
Digital I/O Pins: 17
بەراوردکردن لەگەڵ EFM32TG110F16-QFN24 →

EFM32TG110F16-D-QFN24

✅ جێگرەوەی ڕاستەوخۆ
Silicon Labs
📦 24-QFN (5 x 5 mm)
32-bit ARM Cortex-M3 microcontroller · 32 MHz · 16 kB · 4 kB · 17 · 2 x 16-bit timers · 2.5 V or 3.3 V · 24-QFN (5 mm x 5 mm)

پەیوەندی بۆ نرخ

بینینی داتاشیت →

EFM32TG110F16-QFN24T

✅ جێگرەوەی ڕاستەوخۆ
Silicon Labs
📦 24-QFN (5 x 5 mm)
32-bit ARM Cortex-M3 Tiny Gecko microcontroller · ARM Cortex-M3 · 32 MHz · 16 KB · 4 KB · 17 pins · 2 × 16-bit timers · 3

پەیوەندی بۆ نرخ

بینینی داتاشیت →

EFM32TG108F16-QFN24

✅ جێگرەوەی ڕاستەوخۆ
Silicon Labs
📦 24-QFN (5 x 5 mm)
ARM Cortex-M3, 32-bit · 32 MHz · Tiny Gecko · 16 KB (16K x 8 bits) · 1.85 V to 3.8 V · 2.5 V and 3.3 V · 24-QFN (5 x 5 mm)

پەیوەندی بۆ نرخ

بینینی داتاشیت →

EFM32TG110F16-QFN24 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type 32-bit ARM Cortex-M3 microcontroller
Processor Core ARM Cortex-M3
Maximum CPU Frequency 32 MHz
Architecture 32-bit
Flash Memory 16 kB
RAM 4 kB
Digital I/O Pins 17 pins
Timer Count 2 timers
Timer Resolution 16-bit
Supply Voltage Range 1.85 V to 3.8 V
مەودای پلەی گەرمیی کارکردن -40 °C to 85 °C
پاکێج 24-QFN, 5 x 5 mm
جۆری دامەزراندن Surface Mount
Exposed Pad Present
Shipping Package Reel
Series Tiny Gecko
Security Feature AES
Analog Feature Operational amplifier

ڕێنمایی ڕێکخستنی پینی EFM32TG110F16-QFN24 reel

ڕێکخستنی پین بۆ EFM32TG110F16-QFN24 (پاکێجی reel). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی reel بۆ EFM32TG110F16-QFN24

هیچ داتای وردی پینئاوت بەردەست نییە بۆ EFM32TG110F16-QFN24.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

EFM32TG110F16-QFN24 گونجاوە بۆ 6 بەکارھێنانs: Battery-Powered Sensor Node, Wearable Accessory Controller, Industrial Control Module, Battery-Powered Measurement Instrument, IoT Edge Device, Secure Key and Access Controller.

🧩

Battery-Powered Sensor Node

The EFM32TG110F16-QFN24 fits compact battery-powered sensor nodes because its Cortex-M3 core operates up to 32 MHz while the Tiny Gecko platform emphasizes energy-saving modes and fast wake-up behavior. The 16 kB Flash stores acquisition and control firmware, and the 4 kB RAM supports samples, timestamps, and short protocol buffers. Seventeen digital I/O pins can serve sensors, interrupts, indicators, and configuration controls. Its 1.85 V to 3.8 V operating range also supports low-voltage supply designs, although battery life must be calculated from the sensor duty cycle, radio activity, wake-up frequency, and measured supply current.

📱

Wearable Accessory Controller

The EFM32TG110F16-QFN24 is suitable for wearable accessory controllers that require compact PCB area, low-voltage operation, and responsive local control. Its 24-QFN 5 x 5 mm package leaves room for a sensor, radio, and battery circuitry in a small assembly. The 17 digital I/O pins can support buttons, haptic signaling, status LEDs, and external switches, while AES provides a dedicated security-related peripheral. Designers should select the appropriate regulator strategy and use the exposed pad according to the manufacturer layout guidance to preserve thermal and electrical performance.

🏭

Industrial Control Module

The EFM32TG110F16-QFN24 can serve as the local controller in a compact industrial module when operating conditions remain within its -40 °C to 85 °C range. Two 16-bit timers are useful for periodic sampling, motor timing, pulse measurement, or timing control, while 17 digital I/O pins provide interface capacity for discrete inputs and outputs. The operational amplifier can support suitable low-frequency analog signal conditioning. Firmware should use the manufacturer's peripheral and pin-muxing guidance, and production validation must include thermal, EMC, and environmental testing beyond the component specifications.

🔧

Battery-Powered Measurement Instrument

The EFM32TG110F16-QFN24 fits portable measurement instruments that combine local acquisition, control, and a low-power display or communications interface. Its 32 MHz ARM Cortex-M3 core provides enough throughput for straightforward digital filtering and instrument control, while the 4 kB RAM limits how much live sample data can be buffered. Two 16-bit timers can organize acquisition intervals and time bases, and the operational amplifier can participate in suitable analog front ends. The 1.85 V to 3.8 V supply range supports compact power trees, but signal accuracy and noise performance require system-level characterization.

🌐

IoT Edge Device

The EFM32TG110F16-QFN24 is appropriate for an IoT edge device that performs local state-machine processing before transmitting data to a network. Its low-energy architecture and fast wake-up behavior suit intermittently active equipment, while 16 kB Flash accommodates a compact protocol stack and application logic. The 17 GPIO pins can connect environmental sensors, indicators, and user controls. AES supports secure data handling, but cryptographic use requires correct key provisioning and firmware implementation. Memory sizing should be checked carefully because 4 kB RAM can become restrictive when several communication buffers are active simultaneously.

🔐

Secure Key and Access Controller

The EFM32TG110F16-QFN24 can support secure access-control and key-handling functions where a dedicated AES peripheral is valuable and a full application processor is unnecessary. The Cortex-M3 core executes authentication logic, the 16 kB Flash retains firmware, and 4 kB RAM holds transient state. Its 17 digital I/O pins can connect readers, indicators, and control signals. The MCU alone does not establish system security: developers still need protected key storage, secure boot procedures, firmware-update controls, physical attack analysis, and validation of the final security architecture.

کورتەی بەرهەمە پێشنیارکراوەکان

What are the key specifications of EFM32TG110F16-QFN24 that engineers should know?
The EFM32TG110F16-QFN24 is a 32 MHz ARM Cortex-M3 microcontroller with 16 kB of Flash, 4 kB of RAM, 17 digital I/O pins, two 16-bit timers, AES capability, and an operational amplifier in a 24-QFN 5 x 5 mm package. According to the Silicon Labs manufacturer datasheet, it operates from 1.85 V to 3.8 V and across a -40 °C to 85 °C ambient temperature range. These specifications place it among low-power 32-bit embedded controllers intended for compact, energy-sensitive equipment.
What is the EFM32TG110F16-QFN24 used for?
The EFM32TG110F16-QFN24 is used for compact embedded control, sensor processing, and low-power connected equipment. Its 32 MHz ARM Cortex-M3 core handles real-time control tasks, while 16 kB of Flash stores firmware and 4 kB of RAM supports working data. The 17 digital I/O pins, two 16-bit timers, AES hardware, and operational amplifier suit battery-powered instruments, industrial controls, wearable accessories, and IoT sensor nodes where board area and energy use are constrained.
What is the operating voltage of EFM32TG110F16-QFN24?
The EFM32TG110F16-QFN24 operates from 1.85 V to 3.8 V. According to the Silicon Labs manufacturer datasheet, this range accommodates low-voltage embedded systems and regulated 3.3 V rails. The selected operating voltage must remain within the rated limits for the entire temperature range, and the power supply should be designed to meet the device's decoupling and sequencing requirements described in the datasheet.
Where can I download the EFM32TG110F16-QFN24 datasheet PDF?
The EFM32TG110F16-QFN24 datasheet PDF is available from the manufacturer documentation associated with the Silicon Labs EFM32TG110 family. It defines the device features, electrical characteristics, QFN-24 footprint, exposed-pad arrangement, and operating limits. Use the datasheet together with the EFM32 Tiny Gecko reference documentation when assigning pins, configuring clocks, planning decoupling, and checking the exposed-pad connection.
Where can I find the EFM32TG110F16-QFN24 pinout?
The authoritative EFM32TG110F16-QFN24 pinout is shown in the pin-description and package-drawing sections of the Silicon Labs manufacturer datasheet. The device uses a 24-QFN 5 x 5 mm package with an exposed pad, so the land pattern and pad assignment must follow the datasheet rather than a generic QFN drawing. Assign all supply, ground, reset, programming, and peripheral signals from that table before routing the PCB.
Can EFM32TG110F16-QFN24 be used in battery-powered IoT devices?
Yes, the EFM32TG110F16-QFN24 is suitable for battery-powered IoT and sensor applications when its 32 MHz processing capacity is sufficient for the workload. Its low-energy platform includes energy-saving modes and fast wake-up behavior, while the 1.85 V to 3.8 V supply range supports low-voltage power systems. Battery life still depends on the selected operating mode, duty cycle, radio behavior, sensor load, and board-level leakage.
EFM32TG110F16-QFN24 vs EFM32TG110F16-QFN24T - which is the better drop-in replacement?
EFM32TG110F16-QFN24 and EFM32TG110F16-QFN24T are identified as the same 24-QFN Cortex-M3 device configuration with 16 kB Flash and a 2.5 V or 3.3 V operating class. The T designation identifies the tape-and-reel ordering form, so it is appropriate when the required production packing matches. Before substitution, confirm package orientation, exposed-pad handling, temperature grade, and the exact purchasing code against the manufacturer documentation.
Can EFM32TG110F16-QFN24 replace EFM32TG110F16-QFN24T on the same PCB?
EFM32TG110F16-QFN24 can serve as a pin-compatible alternative to EFM32TG110F16-QFN24T because both are identified in the 24-QFN device family and share the same principal MCU configuration. Compatibility still requires verification of the exposed-pad connection, PCB land pattern, pin multiplexing, and production package form. The T suffix generally denotes tape-and-reel packing, so it should not be selected if the incoming assembly process requires a different package format.
What is the best drop-in replacement for EFM32TG110F16-QFN24?
The best-supported drop-in choices are EFM32TG110F16-D-QFN24 and EFM32TG110F16-QFN24T because both retain the 24-QFN 5 x 5 mm format and the same 32 MHz Cortex-M3, 16 kB Flash, and 4 kB RAM configuration. Silicon Labs also documents the EFM32TG110F16 family in connection with product-identification drop-in replacements. Review the device-identification notice and compare ordering suffixes, temperature grade, pin functions, and packing before approving a substitution.
When should I choose EFM32TG110F16-QFN24 over another Tiny Gecko option?
Choose EFM32TG110F16-QFN24 when the design requires a 32 MHz Cortex-M3 core, 16 kB Flash, 4 kB RAM, 17 digital I/O pins, and a 24-QFN 5 x 5 mm footprint. It is also suitable when the operating range must cover 1.85 V to 3.8 V and -40 °C to 85 °C. Choose a higher-memory or broader-pin-count family member when firmware, peripherals, or I/O exceed the resources of this device.
Is EFM32TG110F16-QFN24 suitable for an industrial control module?
The EFM32TG110F16-QFN24 is suitable for compact industrial control modules whose operating temperature stays within -40 °C to 85 °C and whose voltage rail remains within 1.85 V to 3.8 V. Its two 16-bit timers, 17 digital I/O pins, operational amplifier, and AES function support sensing, actuation, secure data handling, and embedded control. Qualification requirements for a specific industrial product must still be assessed separately.
How much memory does the EFM32TG110F16-QFN24 have?
The EFM32TG110F16-QFN24 contains 16 kB of Flash memory and 4 kB of RAM. According to the Silicon Labs manufacturer datasheet, Flash provides nonvolatile storage for the application firmware, while RAM supports stack, variables, buffers, and working data. The 4 kB RAM allowance should be checked against interrupt depth, protocol buffers, display data, and any debug or logging requirements before finalizing the firmware architecture.
Does the EFM32TG110F16-QFN24 need a heatsink?
The EFM32TG110F16-QFN24 generally does not require a dedicated heatsink in low-power embedded applications because its maximum CPU speed is 32 MHz and its low-voltage supply range limits power dissipation. Thermal performance depends on ambient temperature, switching activity, duty cycle, PCB construction, and the exposed-pad copper area. Follow the manufacturer's layout guidance and keep the exposed pad connected to the intended thermal and ground structure for predictable operation.
Where can I buy EFM32TG110F16-QFN24 online?
Use the Request a Quote form on this page to request EFM32TG110F16-QFN24 availability, current commercial terms, and production quantities. The request should identify the exact MPN, 24-QFN 5 x 5 mm package, reel packing requirement, target quantity, and destination. The form allows the purchasing team to confirm current lead time and supply without relying on a potentially stale catalog listing.
What is the price and lead time of EFM32TG110F16-QFN24?
The current EFM32TG110F16-QFN24 price and lead time are obtained through the Request a Quote form on this page. State the required quantity, reel or other packing format, and delivery location so the order can be quoted against current supply conditions. No static price or lead-time value should be used for budgeting because commercial terms and component availability can change without notice.
Is EFM32TG110F16-QFN24 in stock and what is its typical lead time?
Current EFM32TG110F16-QFN24 stock and lead time should be confirmed through the Request a Quote form on this page. Include your required order quantity, annual usage, reel packing preference, and target delivery schedule. For embedded products, engineers should also avoid building a sole-source procurement plan around a temporary availability signal; the manufacturer lifecycle and PCN information should be reviewed during component qualification.
What can replace EFM32TG110F16-QFN24?
EFM32TG110F16-D-QFN24, EFM32TG110F16-QFN24T, and EFM32TG108F16-QFN24 are the closest identified alternatives with the same 24-QFN Cortex-M3 and 16 kB Flash class. The -D and T versions have a clear relationship to the original ordering code, while TG108 may differ in available resources or peripherals. Confirm the exact pin map, exposed pad, RAM, I/O, timers, temperature rating, and firmware implications before treating any part as a drop-in replacement.

داتای سەرچاوەی ئەندازیاری بۆ EFM32TG110F16-QFN24 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose EFM32TG110F16-QFN24 when a compact, low-power design needs a 32 MHz ARM Cortex-M3 controller with 16 kB Flash, 4 kB RAM, 17 digital I/O pins, and two 16-bit timers. Its documented 1.85 V to 3.8 V range is particularly relevant when the supply can operate below 2.5 V. Consider EFM32TG110F16-D-QFN24 when Silicon Labs has assigned that product-identification code for the required configuration or revision. Use EFM32TG110F16-QFN24T when the reel ordering form matches the assembly process and its voltage class satisfies the design. Evaluate EFM32TG108F16-QFN24 only after confirming that its available RAM, I/O, timers, analog resources, and pin functions satisfy the existing firmware and PCB. For every candidate, verify the exposed pad, temperature grade, pin multiplexing, lifecycle status, and software support before release.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە EFM32TG110F16-D-QFN24 EFM32TG110F16-QFN24T EFM32TG108F16-QFN24
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 24-QFN (5 x 5 mm) 24-QFN (5 x 5 mm) 24-QFN (5 x 5 mm) 24-QFN (5 x 5 mm)
Processor Core ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 16 kB 16 kB 16 kB 16 kB
Series Tiny Gecko Tiny Gecko Tiny Gecko Tiny Gecko
Mounting Type Surface Mount Surface Mount Surface Mount Surface Mount

جیاکەرەوە سەرەکییەکان

  • Compact 24-QFN implementation with 17 digital I/O pins (بەراورد بەEFM32TG108F16-QFN24)
  • Low-voltage operation suitable for compact embedded systems (بەراورد بەEFM32TG110F16-QFN24T)
  • Product-identification alternative within the same Tiny Gecko family (بەراورد بەEFM32TG110F16-D-QFN24)

تێبینییەکانی دیزاین

Follow the manufacturer QFN-24 land pattern and exposed-pad layout exactly. The exposed pad is not an optional mechanical feature: connect it as directed in the datasheet and provide adequate ground and thermal copper. Maintain short return paths for supply and decoupling connections, and use the recommended via arrangement beneath the pad. Confirm pad dimensions, solder mask, and paste stencil against the current package drawing rather than a generic 24-QFN footprint.

Design the supply path for the documented 1.85 V to 3.8 V operating range and place the required decoupling capacitors close to their associated device pins. Keep analog and switching-supply currents separated where possible, provide a clean return reference, and account for startup behavior before external circuitry begins driving I/O pins. Review the complete pin table because 17 usable digital I/O pins may not correspond directly to every physical package lead.

The 5 x 5 mm QFN relies substantially on its exposed pad and PCB copper for heat spreading. Preserve the recommended copper area and avoid cutting thermal paths beneath the device with unrelated signal or split-plane routing. Validate worst-case operating temperature, processor activity, and ambient conditions during system qualification. A dedicated heatsink is generally unnecessary for ordinary low-duty operation, but PCB thermal performance must be confirmed for the finished assembly.

Do not select a similarly named EFM32TG110 ordering code solely by flash size. Confirm the exact suffix, 24-QFN package, temperature range, packing method, and product-identification revision before release. Also verify whether firmware depends on TG110-specific resources because related TG108, TG110, -D, and T ordering options may differ in peripheral resources or revision behavior even when their basic processor and memory classes match.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The manufacturer documentation and ordering information did not explicitly state the requested compliance fields, so they remain unknown. AEC-Q100 qualification is not claimed for this commercial-temperature device.

داتا پشتڕاستکراوەتەوە لە: 2026-11-04 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

EFM32TG110F16-QFN24 EFM32TG110F16-QFN24 datasheet EFM32TG110F16-QFN24 pinout EFM32TG110F16-QFN24 datasheet pdf EFM32TG110F16-QFN24 equivalent EFM32TG110F16-QFN24 replacement EFM32TG110F16-QFN24 cross reference EFM32TG110F16-QFN24 vs EFM32TG108F16-QFN24 EFM32TG110F16-QFN24 QFN24 footprint EFM32TG110F16-QFN24 price EFM32TG110F16-QFN24 stock Silicon Labs EFM32TG110F16-QFN24 EFM32TG110F16-QFN24 battery powered sensor EFM32TG110 32MHz Cortex-M3 QFN EFM32TG110F16-QFN24 application circuit

پێکهاتە و زاراوە پەیوەندیدارەکان

Silicon Labs EFM32TG110F16-QFN24 EFM32TG110F16-D-QFN24 EFM32TG110F16-QFN24T EFM32TG108F16-QFN24 ARM Cortex-M3 Tiny Gecko 32-bit microcontroller embedded microcontroller semiconductor Flash memory RAM digital I/O 16-bit timer AES operational amplifier 24-QFN QFN family surface-mount package 5 x 5 mm package exposed pad 1.85 V to 3.8 V energy-saving modes fast wake-up IoT sensor nodes
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ