EFM32ZG108F4-QFN24 - 24MHz 4KB MCU | Silicon Labs
MPN: EFM32ZG108F4-QFN24 ✓ چالاکEFM32ZG108F4-QFN24 گشتی
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one compact device. The EFM32ZG108F4-QFN24 belongs to the Zero Gecko family of 32-bit microcontrollers and uses the ARM Cortex-M0+ architecture. This places it within the hierarchy of embedded microcontroller, embedded processor, and semiconductor, while differentiating it for compact, energy-sensitive products.
The device combines 4 kB Flash, 2 kB RAM, and 17 digital I/O pins with two 16-bit timers. Its operating speed reaches 24 MHz, providing useful processing capacity for control logic, data acquisition, communication, and user-interface tasks. Silicon Labs also identifies the platform as incorporating low-energy techniques, fast wake-up behavior, and energy-saving modes for duty-cycled and battery-operated equipment.
The Zero Gecko platform combines the 32-bit ARM Cortex-M0+ core with integrated memory and mixed-signal peripherals. Because the available verified specification covers only 17 digital I/O pins, no external-bus interface, and 4 kB Flash, firmware complexity must be considered carefully. Code size, stack requirements, and peripheral-driver footprint should be checked before the MCU is committed to a larger control application.
Typical uses include compact sensor nodes, low-power condition-monitoring units, small industrial controls, portable accessories, and embedded subsystems that need deterministic peripheral handling. The 24-QFN package also allows a small PCB footprint, while the exposed pad supports heat dissipation when the device operates at sustained activity levels. The exact exposed-pad connection must follow the manufacturer pinout and layout guidance.
For a new design, preserve the verified 1.98 V to 3.8 V supply range, validate the timing of all I/O signals, and confirm that the available firmware fits within 4 kB of Flash while leaving adequate 2 kB RAM for the stack and working data. Firmware updates and debugging must fit the device's limited memory budget, so production images should be measured rather than estimated.
This product page consolidates verified manufacturer and distributor specifications, package details, sourcing references, and engineering-oriented design guidance. It also clearly distinguishes the target from the available drop-in alternative and identifies where additional electrical, pinout, pricing, or lifecycle information requires verification.
جێگرەوەکانی جێگۆڕکێ بۆ EFM32ZG108F4-QFN24 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ EFM32ZG108F4-QFN24 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Flash Memory, Package, Digital I/O Pins, Timers, Product Type.
EFM32ZG108F4-B-QFN24
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →EFM32ZG108F4-QFN24 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 32-bit ARM Cortex-M0+ microcontroller |
| Processor Core | ARM Cortex-M0+ |
| Maximum Clock Speed | 24 MHz |
| Flash Memory | 4 kB |
| RAM | 2 kB |
| Digital I/O Pins | 17 pins |
| Timers | 2 x 16-bit timers |
| Supply Voltage Range | 1.98 V to 3.8 V |
| Architecture | 32-bit |
| Series | Zero Gecko |
| پاکێج | 24-QFN (5 mm x 5 mm) |
| Package Pin Count | 24 pins |
| جۆری دامەزراندن | Surface mount |
| Low-Power Features | Energy-saving modes and fast wake-up behavior |
| Exposed Thermal Pad | Present |
ڕێنمایی ڕێکخستنی پینی EFM32ZG108F4-QFN24 24 pins
ڕێکخستنی پین بۆ EFM32ZG108F4-QFN24 (پاکێجی 24 pins). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ EFM32ZG108F4-QFN24.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
EFM32ZG108F4-QFN24 گونجاوە بۆ 6 بەکارھێنانs: Battery-Powered Sensor Node, Industrial Condition Monitoring, Low-Power IoT Control Head, Portable Accessory Controller, Smart Home Sensor Endpoint, Compact Instrumentation Controller.
Battery-Powered Sensor Node
The EFM32ZG108F4-QFN24 fits compact sensor nodes because its Zero Gecko platform emphasizes energy-saving modes and fast wake-up behavior while operating from 1.98 V to 3.8 V. A typical design would wake periodically, sample an external sensor, process the result, transmit a short status update, and return to a low-power state. Its 24 MHz ARM Cortex-M0+ core provides more general-purpose capability than an 8-bit controller, while 4 kB of Flash and 2 kB of RAM impose a strict need for compact firmware. The 24-QFN footprint also preserves board area in wearable and environmental-monitoring products.
پێشنیارکراو
Industrial Condition Monitoring
The EFM32ZG108F4-QFN24 is suitable for compact industrial condition-monitoring modules that periodically inspect temperature, vibration, or equipment-state inputs. Its 17 digital I/O pins provide direct connections for sensors and digital signaling, while two 16-bit timers support periodic sampling, debouncing, or time-based control. The 24 MHz Cortex-M0+ core can execute filtering and local logic without requiring a higher-power processor. Because the verified operating range is 1.98 V to 3.8 V, the module can run from regulated low-voltage rails, although temperature-grade and industrial-qualification requirements must be confirmed separately.
پێشنیارکراو
Low-Power IoT Control Head
A compact IoT control head can use the EFM32ZG108F4-QFN24 to manage local inputs, actuator logic, and short communication routines when the system prioritizes low energy. The ARM Cortex-M0+ core runs up to 24 MHz, and the Zero Gecko architecture supports fast wake-up and energy-saving modes for duty-cycled operation. With 17 digital I/O pins, the device can connect sensors and discrete controls without requiring a large external interface controller. Its 4 kB Flash and 2 kB RAM make firmware size the principal constraint, so protocol libraries should be measured before the design is finalized.
پێشنیارکراو
Portable Accessory Controller
The EFM32ZG108F4-QFN24 can serve as the controller in a small portable accessory where the PCB area is constrained and the load is primarily digital. Its 24-QFN package measures 5 mm by 5 mm, leaving room for a battery, sensor, and protection components in a compact assembly. The 1.98 V minimum supply voltage supports low-voltage power systems, while the two 16-bit timers can support timing-intensive control tasks. Firmware must remain within 4 kB of Flash and reserve sufficient RAM for the stack; the -B variant may be preferable if a verified 8 kB Flash footprint materially reduces memory pressure.
پێشنیارکراو
Smart Home Sensor Endpoint
For a smart-home sensor endpoint, the EFM32ZG108F4-QFN24 combines a 24 MHz ARM Cortex-M0+ processor, 17 digital I/O pins, and low-energy operating features in a compact package. It can manage a local sensor, debounce switch inputs, apply simple filtering, and wake a communications section for short transmission intervals. The 2 kB RAM is suitable only for modest buffers, so data logging should normally be handled outside the MCU. Its small 5 mm by 5 mm QFN outline supports dense wall-panel or portable installations, provided the PCB follows the manufacturer's land pattern and exposed-pad requirements.
پێشنیارکراو
Compact Instrumentation Controller
The EFM32ZG108F4-QFN24 can act as the control processor in compact instrumentation where digital measurement channels, local status indicators, and timing functions are required. Its two 16-bit timers are useful for periodic measurements and event timing, while the 17 digital I/O pins support sensor interfaces and control signals. The 24 MHz core provides straightforward execution for local calculations without requiring external logic. Its 4 kB Flash limit is significant for calibration tables, communications, and user-interface code, so the available 8 kB EFM32ZG108F4-B-QFN24 may offer a safer migration path when its additional memory is required.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ EFM32ZG108F4-QFN24 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | EFM32ZG108F4-B-QFN24 |
|---|---|---|
| Package | 24-QFN (5 mm x 5 mm) | 24-QFN (5 mm x 5 mm) |
| Brand | Silicon Labs | Silicon Labs |
| Processor Core | ARM Cortex-M0+ | ARM Cortex-M0+ |
| Maximum Clock Speed | 24 MHz | 24 MHz |
| Flash Memory | 4 kB | 8 kB |
| Supply Voltage Range | 1.98 V to 3.8 V | 1.98 V to 3.8 V |
| Series | Zero Gecko | Zero Gecko |
| Unit Price at Quantity 1 | Unavailable in verified data | Unavailable in verified data |
جیاکەرەوە سەرەکییەکان
- Lower Flash capacity supports a more compact firmware baseline (بەراورد بەEFM32ZG108F4-B-QFN24)
- Same verified processor performance in the same package (بەراورد بەEFM32ZG108F4-B-QFN24)
- Same verified low-voltage operating range (بەراورد بەEFM32ZG108F4-B-QFN24)
تێبینییەکانی دیزاین
Use the manufacturer package drawing as the authority for the 24-QFN land pattern, pin-1 orientation, thermal-pad dimensions, and paste pattern. The verified sources establish a 5 mm by 5 mm QFN with an exposed pad, but do not provide a complete pin table. Do not infer pad connections from the package dimensions alone. Place the input, ground, and decoupling connections directly beneath or immediately adjacent to their assigned pads, while keeping the exposed-pad copper layout compliant with the datasheet's assembly requirements.
Design the supply for the verified 1.98 V to 3.8 V operating range and include startup and transient margin rather than treating those limits as ideal setpoints. Place bulk and high-frequency bypass capacitors near the device's supply and ground connections using the datasheet-recommended network. Because low-energy behavior depends on valid rail sequencing and clean transitions, verify brownout, power-off leakage, and wake behavior across the complete voltage range used by the product.
The main design risk is exceeding the device's 4 kB Flash and 2 kB RAM limits while assuming that the nominal 24 MHz clock guarantees sufficient performance. Build the firmware early, measure the linked image and worst-case stack, and reserve RAM for interrupt context and library allocations. If the image no longer fits, evaluate the same-package EFM32ZG108F4-B-QFN24 with 8 kB Flash rather than adding a memory device or changing the footprint.
The exposed pad is an important thermal-design feature of the 24-QFN package. Preserve a solderable exposed-pad land area, apply the manufacturer's recommended solder mask and paste configuration, and provide sufficient copper without compromising assembly tolerances. The supplied verified data does not publish thermal resistance or maximum power figures, so junction temperature cannot be calculated reliably. Obtain those values from the complete manufacturer documentation before conducting sustained-load thermal validation.
زانیاری پابەندبوون
The verified manufacturer and distributor snippets do not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 qualification was not stated and is treated as not applicable because no automotive-grade claim was provided.