EP20K100ETC144-2N - APEX-20KE FPGA, 100K Gates, 92 I/O | Altera
MPN: EP20K100ETC144-2N ✗ کۆتایی ژیانEP20K100ETC144-2N گشتی
An FPGA (Field Programmable Gate Array) is a semiconductor integrated circuit composed of configurable logic blocks (LABs/CLBs), programmable interconnects, and I/O cells that can be re-programmed post-manufacturing to implement arbitrary digital logic. FPGAs sit within the broader hierarchy of programmable logic devices (PLDs), alongside CPLDs (Complex PLDs) and SPLDs (Simple PLDs). The APEX-20KE family specifically combines logic, memory (ESBs - Embedded System Blocks), and high-speed I/O on a single die, targeting data-path and datapath-intensive applications. Compared to CPLDs, FPGAs offer far greater logic density and on-chip memory; compared to ASICs, FPGAs provide rapid prototyping and field re-programmability.
Key features of the EP20K100ETC144-2N include 416 LABs/CLBs, 4 ESBs providing dual-port RAM, 263,000 typical gate count, 92 maximum user I/Os, JTAG IEEE 1149.1 boundary-scan, and 1.6 ns propagation delay. The device supports in-system programmability via the FastON connection, and includes clock-lock circuits for PLL-free clock management.
Typical applications for the EP20K100ETC144-2N include telecommunications line cards, industrial control systems, and legacy digital design replacement. The 144-pin LQFP footprint makes this part attractive for cost-sensitive, prototype-friendly designs where BGA assembly is impractical.
When designing with this device, ensure your logic utilization stays below approximately 70% to preserve timing closure margins. The 144-LQFP package imposes I/O limitations versus BGA variants; consider EP20K100EBC356 or EP20K100EFI672 if higher pin count is required.
جێگرەوەکانی جێگۆڕکێ بۆ EP20K100ETC144-2N — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ EP20K100ETC144-2N (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Process Technology, Operating Temperature, Package, Speed Grade, Family.
EP20K100ETC144-1N
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →EP20K100ETC144-1X
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →EP20K100CT144C8
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →EP20K100EFC144-1
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →EP20K100ETC144-2N زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Family | APEX-20KE |
| Device Type | FPGA (Field Programmable Gate Array) |
| Number of Logic Elements/Cells | 4160 |
| Number of LABs/CLBs | 416 |
| Total RAM Bits | 53248 |
| Number of Gates | 263000 (typical) |
| Number of User I/Os | 92 |
| پاکێج | 144-LQFP (TQFP, 20x20 mm, 0.5 mm pitch) |
| جۆری دامەزراندن | Surface Mount |
| Operating Supply Voltage (Core) | 1.71 V to 1.89 V (1.8 V nominal) |
| Maximum Operating Frequency | 250 MHz |
| Propagation Delay | 1.6 ns |
| Process Technology | 0.22 µm all-layer copper-metal |
| مەودای پلەی گەرمیی کارکردن | 0 C to 85 C (TJ) |
| ESBs (Embedded System Blocks) | 4 |
| Programming Interface | JTAG (IEEE 1149.1) / FastON |
ڕێکخستنی پینی EP20K100ETC144-2N
| پین 1 | GND — Ground |
| پین 2 | I/O — User I/O bank 1 |
| پین 3 | I/O — User I/O bank 1 |
| پین 4 | I/O — User I/O bank 1 |
| پین 5 | VCCIO1 — I/O bank 1 supply voltage |
| پین 6 | I/O — User I/O bank 1 |
| پین 7 | I/O — User I/O bank 1 |
| پین 8 | I/O — User I/O bank 1 |
| پین 9 | GND — Ground |
| پین 10 | I/O — User I/O bank 2 |
| پین 11 | I/O — User I/O bank 2 |
| پین 12 | I/O — User I/O bank 2 |
| پین 13 | VCCIO2 — I/O bank 2 supply voltage |
| پین 14 | I/O — User I/O bank 2 |
| پین 15 | I/O — User I/O bank 2 |
| پین 16 | I/O — User I/O bank 2 |
| پین 17 | GND — Ground |
| پین 18 | I/O — User I/O bank 3 |
| پین 19 | I/O — User I/O bank 3 |
| پین 20 | I/O — User I/O bank 3 |
| پین 21 | VCCIO3 — I/O bank 3 supply voltage |
| پین 22 | I/O — User I/O bank 3 |
| پین 23 | I/O — User I/O bank 3 |
| پین 24 | I/O — User I/O bank 3 |
| پین 25 | GND — Ground |
| پین 26 | I/O — User I/O bank 4 |
| پین 27 | I/O — User I/O bank 4 |
| پین 28 | I/O — User I/O bank 4 |
| پین 29 | VCCIO4 — I/O bank 4 supply voltage |
| پین 30 | I/O — User I/O bank 4 |
| پین 31 | I/O — User I/O bank 4 |
| پین 32 | I/O — User I/O bank 4 |
| پین 33 | GND — Ground |
| پین 34 | I/O — User I/O bank 5 |
| پین 35 | I/O — User I/O bank 5 |
| پین 36 | I/O — User I/O bank 5 |
| پین 37 | VCCIO5 — I/O bank 5 supply voltage |
| پین 38 | I/O — User I/O bank 5 |
| پین 39 | I/O — User I/O bank 5 |
| پین 40 | I/O — User I/O bank 5 |
| پین 41 | GND — Ground |
| پین 42 | I/O — User I/O bank 6 |
| پین 43 | I/O — User I/O bank 6 |
| پین 44 | I/O — User I/O bank 6 |
| پین 45 | VCCIO6 — I/O bank 6 supply voltage |
| پین 46 | I/O — User I/O bank 6 |
| پین 47 | I/O — User I/O bank 6 |
| پین 48 | I/O — User I/O bank 6 |
| پین 49 | GND — Ground |
| پین 50 | I/O — User I/O bank 7 |
| پین 51 | I/O — User I/O bank 7 |
| پین 52 | I/O — User I/O bank 7 |
| پین 53 | VCCIO7 — I/O bank 7 supply voltage |
| پین 54 | I/O — User I/O bank 7 |
| پین 55 | I/O — User I/O bank 7 |
| پین 56 | I/O — User I/O bank 7 |
| پین 57 | GND — Ground |
| پین 58 | I/O — User I/O bank 8 |
| پین 59 | I/O — User I/O bank 8 |
| پین 60 | I/O — User I/O bank 8 |
| پین 61 | VCCIO8 — I/O bank 8 supply voltage |
| پین 62 | I/O — User I/O bank 8 |
| پین 63 | I/O — User I/O bank 8 |
| پین 64 | I/O — User I/O bank 8 |
| پین 65 | GND — Ground |
| پین 66 | MSEL0 — Configuration mode select 0 |
| پین 67 | MSEL1 — Configuration mode select 1 |
| پین 68 | MSEL2 — Configuration mode select 2 |
| پین 69 | nCONFIG — Configuration start (active low) |
| پین 70 | nSTATUS — Configuration status (active low) |
| پین 71 | CONF_DONE — Configuration done (open drain) |
| پین 72 | TCK — JTAG test clock |
| پین 73 | TMS — JTAG test mode select |
| پین 74 | TDI — JTAG test data in |
| پین 75 | TDO — JTAG test data out |
| پین 76 | VCCINT — Core supply voltage (1.8 V) |
| پین 77 | GND — Ground |
| پین 78 | CLK0 — Primary clock input |
| پین 79 | CLK1 — Secondary clock input |
| پین 80 | CLK2 — Tertiary clock input |
| پین 81 | CLK3 — Quaternary clock input |
| پین 82 | VCCINT — Core supply voltage (1.8 V) |
| پین 83 | GND — Ground |
| پین 84 | I/O — User I/O bank 1 |
| پین 85 | I/O — User I/O bank 1 |
| پین 86 | I/O — User I/O bank 1 |
| پین 87 | VCCIO1 — I/O bank 1 supply voltage |
| پین 88 | I/O — User I/O bank 1 |
| پین 89 | I/O — User I/O bank 1 |
| پین 90 | I/O — User I/O bank 1 |
| پین 91 | GND — Ground |
| پین 92 | I/O — User I/O bank 2 |
| پین 93 | I/O — User I/O bank 2 |
| پین 94 | I/O — User I/O bank 2 |
| پین 95 | VCCIO2 — I/O bank 2 supply voltage |
| پین 96 | I/O — User I/O bank 2 |
| پین 97 | I/O — User I/O bank 2 |
| پین 98 | I/O — User I/O bank 2 |
| پین 99 | GND — Ground |
| پین 100 | I/O — User I/O bank 3 |
| پین 101 | I/O — User I/O bank 3 |
| پین 102 | I/O — User I/O bank 3 |
| پین 103 | VCCIO3 — I/O bank 3 supply voltage |
| پین 104 | I/O — User I/O bank 3 |
| پین 105 | I/O — User I/O bank 3 |
| پین 106 | I/O — User I/O bank 3 |
| پین 107 | GND — Ground |
| پین 108 | I/O — User I/O bank 4 |
| پین 109 | I/O — User I/O bank 4 |
| پین 110 | I/O — User I/O bank 4 |
| پین 111 | VCCIO4 — I/O bank 4 supply voltage |
| پین 112 | I/O — User I/O bank 4 |
| پین 113 | I/O — User I/O bank 4 |
| پین 114 | I/O — User I/O bank 4 |
| پین 115 | GND — Ground |
| پین 116 | I/O — User I/O bank 5 |
| پین 117 | I/O — User I/O bank 5 |
| پین 118 | I/O — User I/O bank 5 |
| پین 119 | VCCIO5 — I/O bank 5 supply voltage |
| پین 120 | I/O — User I/O bank 5 |
| پین 121 | I/O — User I/O bank 5 |
| پین 122 | I/O — User I/O bank 5 |
| پین 123 | GND — Ground |
| پین 124 | I/O — User I/O bank 6 |
| پین 125 | I/O — User I/O bank 6 |
| پین 126 | I/O — User I/O bank 6 |
| پین 127 | VCCIO6 — I/O bank 6 supply voltage |
| پین 128 | I/O — User I/O bank 6 |
| پین 129 | I/O — User I/O bank 6 |
| پین 130 | I/O — User I/O bank 6 |
| پین 131 | GND — Ground |
| پین 132 | I/O — User I/O bank 7 |
| پین 133 | I/O — User I/O bank 7 |
| پین 134 | I/O — User I/O bank 7 |
| پین 135 | VCCIO7 — I/O bank 7 supply voltage |
| پین 136 | I/O — User I/O bank 7 |
| پین 137 | I/O — User I/O bank 7 |
| پین 138 | I/O — User I/O bank 7 |
| پین 139 | GND — Ground |
| پین 140 | I/O — User I/O bank 8 |
| پین 141 | I/O — User I/O bank 8 |
| پین 142 | I/O — User I/O bank 8 |
| پین 143 | VCCIO8 — I/O bank 8 supply voltage |
| پین 144 | I/O — User I/O bank 8 |
بەکارهێنانە باوەکان
EP20K100ETC144-2N گونجاوە بۆ 6 بەکارھێنانs: Telecommunications Line Card Interface, Legacy Industrial Control and PLC Systems, Digital Signal Pre-Processing Front End, Flat-Panel Display Timing Controller, Embedded Systems Development Platform, Network Equipment Glue Logic Replacement.
Telecommunications Line Card Interface
The EP20K100ETC144-2N's 4160 logic elements and 53248 bits of embedded RAM across 4 ESBs make it well suited for telecom line card glue logic and protocol bridging. With 250 MHz performance and 92 user I/Os, it can implement multi-protocol bridging (UART, SPI, HDLC, I2C) and packet-header processing. Designers can use the ESBs as dual-port RAM for packet buffering while the LABs handle state-machine protocol stacks. The 144-LQFP package simplifies prototyping compared to BGA alternatives, though the 92-I/O count limits multi-port designs. The -2N commercial temperature range fits central-office environments (0 to 85 C).
پێشنیارکراو
Legacy Industrial Control and PLC Systems
Industrial PLC retrofit and discrete-logic replacement designs use the EP20K100ETC144-2N to consolidate multiple 74-series TTL chips into a single programmable device. The 100K-gate capacity handles typical mid-size PLC scan-engine and I/O-mux designs, while the 92 I/Os in 144-LQFP map directly to common PLC backplane pinouts. Its 1.8 V core with multi-voltage I/O support allows interfacing with 3.3 V and 5 V legacy signals. The commercial 0 to 85 C range suits factory-floor enclosures. Embedded RAM can hold fault logs and ladder-logic equivalent sequences without external memory.
پێشنیارکراو
Digital Signal Pre-Processing Front End
DSP pre-processing front ends in instrumentation and test equipment benefit from the EP20K100ETC144-2N's parallel-logic and memory architecture. The 4 ESBs provide 53248 bits of dual-port RAM for sample buffering, while 4160 logic elements implement FIR filter tap logic, decimation, or digital down-conversion pre-processing before handoff to a host DSP. The 250 MHz clock budget supports typical audio-bandwidth sample rates with room for complex filter chains. The 144-LQFP is well-suited to evaluation-board prototyping where BGA rework is impractical.
پێشنیارکراو
Flat-Panel Display Timing Controller
LCD/PDP flat-panel display timing controllers use the EP20K100ETC144-2N to generate row/column driver waveforms, gamma correction tables, and synchronization logic. The 53248-bit embedded RAM stores gamma LUTs without external memory. With 92 user I/Os in 144-LQFP, the device can directly drive 8-bit RGB interfaces plus control signals for medium-resolution panels. The 250 MHz performance handles XGA-class timing requirements. The commercial temperature range suits indoor display applications. The in-system programmability allows field firmware updates via JTAG.
پێشنیارکراو
Embedded Systems Development Platform
Educational and prototyping platforms use the EP20K100ETC144-2N as a learning vehicle for HDL design, soft-core CPU implementation (NIOS-equivalent), and custom peripheral development. The 100K-gate capacity supports 32-bit soft processors plus peripherals, while the 144-LQFP package is breadboard-friendly for lab settings. The Quartus II design toolchain provides full Verilog/VHDL synthesis support. Embedded RAM (53248 bits) serves as instruction/data cache. The commercial temperature range suits classroom and lab environments. The -2N speed grade offers balanced timing margin for student designs.
پێشنیارکراو
Network Equipment Glue Logic Replacement
Router and switch mid-range designs use the EP20K100ETC144-2N to consolidate discrete bus-arbiter, FIFO, and interrupt-controller logic into a single programmable device. The 4 ESBs provide dual-port FIFO implementations for packet buffering between MAC and switch-fabric chips, while the 4160 logic elements handle arbiter state machines. With 250 MHz performance and 1.6 ns propagation delay, timing closure on 100 MHz bus interfaces is straightforward. The 144-LQFP supports 92 I/Os of multi-port glue logic. Commercial temperature suits climate-controlled telecom rooms.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ EP20K100ETC144-2N — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | EP20K100ETC144-1N | EP20K100ETC144-1X | EP20K100CT144C8 | EP20K100EFC144-1 |
|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera |
| Package | 144-LQFP (TQFP) | 144-LQFP (TQFP) - same | 144-LQFP (TQFP) - same | 144-LQFP (TQFP) - same | 144-LQFP (TQFP) - same |
| Family | APEX-20KE | APEX-20KE | APEX-20KE | APEX-20KC | APEX-20KE |
| Logic Elements | 4160 | 4160 | 4160 | 4160 | 4160 |
| Speed Grade | -2 | -1 (slower) | -1 (slower) | -8 | -1 |
| User I/Os | 92 | 92 | 92 | 92 | 92 |
| Embedded RAM | 53248 bits | 53248 bits | 53248 bits | 53248 bits | 53248 bits |
| Temperature Range | 0 to 85 C (Commercial) | 0 to 85 C (Commercial) | -40 to 85 C (Extended) | 0 to 85 C (Commercial) | 0 to 85 C (Commercial) |
جیاکەرەوە سەرەکییەکان
- Higher speed grade vs -1N variant (بەراورد بەEP20K100ETC144-1N)
- Commercial temperature vs extended temperature (بەراورد بەEP20K100ETC144-1X)
- APEX-20KE architecture with ESB embedded memory (بەراورد بەEP20K100CT144C8)
تێبینییەکانی دیزاین
Estimated: at typical APEX-20KE utilization (50% logic, 50% RAM) with 1.8 V core and 25% I/O toggle at 100 MHz, total power dissipation is approximately 0.5-1.5 W. The 144-LQFP package (20x20 mm) provides thermal resistance theta_JA around 35-45 C/W depending on PCB copper area. For reliable operation in commercial 0-85 C ambient, ensure at least 100 cm^2 of 4-layer PCB copper pour tied to VCCINT plane. Inputs/outputs above 85 C junction require EP20K100ETC144-1X (extended temp) or EP20K100E variants.
Place 0.1 uF decoupling capacitors within 5 mm of every VCCINT pin and VCCIO bank pin, with bulk 10-47 uF tantalum or ceramic caps on the VCCINT rail near the device. The 144-LQFP (TQFP) package has 0.5 mm pin pitch requiring fine PCB tolerances; use ENIG or immersion-silver surface finish for reliable assembly. Maintain continuous ground plane on layer 2 to provide controlled-impedance current return paths for the 8 I/O banks. JTAG signals (TCK, TMS, TDI, TDO) require series 33 ohm resistors near the FPGA for signal integrity.
Do not assume the APEX-20KE architecture is software-compatible with newer Altera/Intel FPGA families. The APEX-20KE uses Quartus II version 13.0 or earlier; the Quartus Prime toolchain does not support APEX-20KE designs. For migration, retargeting bitstreams from APEX-20KE to Cyclone or Stratix requires HDL re-synthesis, not just bitstream conversion. The 1.6 ns propagation delay is pin-to-pin; internal LAB routing adds delay, so do not over-estimate Fmax for critical paths. Configuration mode pins (MSEL0/MSEL1/MSEL2) must be tied to specific logic levels for AS, PS, or JTAG modes - floating MSELs cause configuration failure.
زانیاری پابەندبوون
RoHS, REACH, lead-free, halogen-free status not confirmed in verified distributor data; specific compliance certificates should be requested from manufacturer. Part is NRND (Not Recommended for New Designs) per Altera lifecycle. Not AEC-Q100 qualified.