EP3C25F256I7 - 24,624-LC Cyclone III FPGA | Intel
MPN: EP3C25F256I7 ✓ چالاکEP3C25F256I7 گشتی
An FPGA is a semiconductor whose internal digital circuit is defined by a configuration bitstream rather than fixed mask programming. Cyclone III devices combine programmable logic elements, embedded memory, general-purpose I/O, and dedicated resources such as multipliers and clock-management blocks. This architecture allows one physical PCB design to support multiple protocols, control sequences, or signal-processing functions by changing the configuration file rather than the silicon.
Key device characteristics include 24,624 logic elements, 156 I/O, 608,256 bits of device memory, and a 65 nm fabrication process. The F256 package provides 256 contacts in a 17 mm by 17 mm square FBGA outline. The I7 ordering option denotes an industrial-temperature-oriented configuration, and the listed operating range extends from -40 °C to 100 °C at the junction. These attributes place the device between smaller programmable logic devices and larger FPGAs requiring more board area.
The device integrates 594 Kb of block RAM according to its product listing, while the device-level memory organization shown elsewhere is 608,256 bits. Cyclone III FPGAs support parallel data paths, pipelined DSP operations, clock-domain control, and serial connectivity through configurable I/O. Because FPGA performance depends on the selected clock, memory interface, I/O standard, routing, and design constraints, a 437.5 MHz figure should not be interpreted as a guaranteed operating frequency for every logic design.
Typical applications include industrial control and automation, communications infrastructure, audio and signal processing, data acquisition, network interface control, and embedded test equipment. In these systems, the FPGA can implement parallel protocols, state machines, packet handling, custom interfaces, or fixed-function signal pipelines while preserving upgrade flexibility through configuration updates.
PCB implementation requires careful attention to the 256-ball BGA escape routing, power integrity, decoupling, clock jitter, and I/O voltage compatibility. The 1.2 V core and externally supported I/O standards must be matched to the connected circuitry. Designers should use the manufacturer pin and package documentation to assign balls, power groups, and configuration pins before releasing the board layout.
This page combines device specifications, practical application guidance, package-focused design notes, and same-package alternatives for engineers evaluating the EP3C25F256I7. It also distinguishes confirmed attributes from parameters that must be checked in the Cyclone III documentation or a device-specific quote, helping teams make a technically defensible design and sourcing decision.
جێگرەوەکانی جێگۆڕکێ بۆ EP3C25F256I7 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ EP3C25F256I7 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Operating Temperature, Mounting Type, Device Type, Package, Speed Grade.
EP3C25F256I7N
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →EP3C25F256C8N
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →EP3C25F256C7N
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
EP3C25F256I8N
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
EP3C25F256C8
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →EP3C25F256I7 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | Cyclone III field-programmable gate array (FPGA) |
| Logic Elements | 24,624 elements |
| Maximum Stated Frequency | 437.5 MHz |
| Logic Blocks | 1,956 blocks |
| Device Memory | 608,256 bits |
| Block RAM | 594 Kb |
| Embedded Multiplier Count | 156 multipliers |
| I/O Count | 156 I/O |
| Core Supply Voltage | 1.2 V |
| Fabrication Process | 65 nm |
| پاکێج | 256-pin FBGA, 17 mm x 17 mm |
| Terminal Count | 256 terminals |
| جۆری دامەزراندن | Surface-mount ball grid array |
| Temperature Grade | Industrial |
| پلەی گەرمیی کارکردن | -40 °C to +100 °C junction |
| Speed Grade | Grade 7 |
| Lead-Free Status | Lead-free package marking |
ڕێنمایی ڕێکخستنی پینی EP3C25F256I7 256-pin fbga, 17 mm x 17 mm
ڕێکخستنی پین بۆ EP3C25F256I7 (پاکێجی 256-pin fbga, 17 mm x 17 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ EP3C25F256I7.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
EP3C25F256I7 گونجاوە بۆ 6 بەکارھێنانs: Industrial Automation and Control, Communications and Network Interface, Audio and Digital Signal Processing, Industrial Data Acquisition, Programmable Test and Measurement, Embedded Interface Consolidation.
Industrial Automation and Control
The EP3C25F256I7 fits industrial automation designs requiring deterministic control, monitoring, and configurable I/O. Its 24,624 logic elements can support multiple control state machines, while 156 I/O and 156 multipliers provide resources for encoder interfaces, timing functions, and parallel signal conditioning. The industrial I7 ordering class and -40 °C to +100 °C listed junction range are useful in factory equipment, yet the enclosure's worst-case temperature must remain within that limit. Use the 1.2 V core rail with local decoupling and retain the manufacturer ball map for configuration, ground, and power assignments. The device is best positioned as a flexible control-plane or sensor-hub FPGA rather than as a substitute for a dedicated safety controller.
پێشنیارکراو
Communications and Network Interface
The EP3C25F256I7 is appropriate for fixed-format packet processing, protocol conversion, and parallel data-plane functions where logic can be updated after deployment. Its 24,624 logic elements and 608,256 bits of device memory permit parallel header inspection, buffering, and stateful interface logic, while the stated 437.5 MHz device maximum supports the starting point for pipelined designs. Actual throughput depends on the selected I/O standard and timing closure. Place the FPGA near connectors and PHY devices, isolate high-speed routing from sensitive clocks, and implement timing constraints in the complete design. A network-facing function should also include error handling and watchdog behavior rather than relying on FPGA configuration logic alone.
پێشنیارکراو
Audio and Digital Signal Processing
EP3C25F256I7 can implement audio-rate datapaths, sample-format conversion, digital filtering, and clock-domain crossing in programmable audio systems. The device provides 24,624 logic elements, 156 multipliers, and 594 Kb of block RAM, allowing parallel arithmetic and local buffering without relying on a fixed DSP function. The 437.5 MHz maximum is a device-level figure rather than a guarantee for every audio pipeline, so filters should be pipelined and timing constraints checked after synthesis. Keep codec and converter clocks on controlled routes, terminate unused I/O appropriately, and use separate clean supplies where the audio board permits them. This application benefits from the FPGA's ability to update signal-processing behavior through configuration changes.
پێشنیارکراو
Industrial Data Acquisition
The EP3C25F256I7 suits parallel data-acquisition systems that must synchronize multiple inputs, perform preliminary filtering, and transfer results to a processor. Its 156 I/O support parallel sensor, ADC, and digital bus interfaces, while 24,624 logic elements and embedded block RAM can host buffering, counters, trigger logic, and time alignment. The industrial temperature classification supports equipment operating in variable industrial environments, provided system-level thermal analysis confirms adequate margin. Configure input standards that match the source signal amplitudes, add series damping where required by the interface specification, and isolate analog input routing from switching outputs. For high-throughput channels, the complete design must close timing at the intended clock rather than relying on the device's headline frequency.
پێشنیارکراو
Programmable Test and Measurement
EP3C25F256I7 is well matched to instrument-control logic, pattern generation, timing measurement, and adaptable interface routing in test equipment. The 24,624-element fabric can implement multiple sequencers and measurement engines, while 156 I/O provide parallel connections to DUT fixtures and instrument adapters. Its field-programmable architecture allows a single platform to support changed protocols or test sequences. Designers should keep analog measurement paths away from FPGA switching nodes, provide deterministic clocking, and define fail-safe I/O states for instrument safety. The industrial I7 grade can support laboratory and production equipment used across changing ambient conditions, but enclosure heat rise must be included in the junction-temperature budget.
پێشنیارکراو
Embedded Interface Consolidation
The EP3C25F256I7 can consolidate several parallel and serial interfaces around a host processor while preserving a reconfigurable hardware boundary. Its 24,624 logic elements support bridge engines, DMA-style data movement, FIFOs, and protocol state machines, and its 156 multipliers can accelerate format conversion or checksum operations. The 1.2 V core and 256-ball FBGA require careful power-plane segmentation and via-current planning, especially when adjacent I/O banks drive heavier loads. Assign all pins from the F256 ball map, observe bank-specific supply requirements, and keep configuration access secure. This architecture is useful when a fixed CPLD lacks sufficient memory or routing resources but a larger FPGA would be unnecessary.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ EP3C25F256I7 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | EP3C25F256I7N | EP3C25F256C8N | EP3C25F256C7N | EP3C25F256I8N | EP3C25F256C8 |
|---|---|---|---|---|---|---|
| Package | 256-pin FBGA | 256-pin FBGA | 256-pin FBGA | 256-pin FBGA | 256-pin FBGA | 256-pin FBGA |
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Device Family | Cyclone III | Cyclone III | Cyclone III | Cyclone III | Cyclone III | Cyclone III |
| Logic Elements | 24,624 elements | 24,624 elements | 24,624 elements | 24,624 elements | 24,624 elements | 24,624 elements |
| I/O Count | 156 I/O | 156 I/O | 156 I/O | 156 I/O | 156 I/O | 156 I/O |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Temperature Grade | Industrial | Industrial | Commercial | Commercial | Industrial | Commercial |
| Process Technology | 65 nm | 65 nm | 65 nm | 65 nm | 65 nm | 65 nm |
جیاکەرەوە سەرەکییەکان
- Industrial ordering class supports extended-temperature equipment (بەراورد بەEP3C25F256C8N)
- Highest stated device frequency among the listed alternatives (بەراورد بەEP3C25F256C8)
- Broad programmable resource mix for parallel processing (بەراورد بەEP3C25F256C7N)
تێبینییەکانی دیزاین
Use the manufacturer F256 land pattern and assign all 256 balls from the EP3C25F256I7 pin-description table. Route the 1.2 V core supply through a low-impedance plane and place high-frequency decoupling close to the associated power balls. Keep the 17 mm by 17 mm BGA escape paths short where possible, use adequate via counts for current and thermal paths, and avoid placing noisy interfaces directly beneath sensitive clock or configuration routing.
Separate the 1.2 V core requirement from the I/O supply rails. Confirm every bank voltage against the selected I/O standard before schematic completion, and follow the manufacturer's sequencing and ramp requirements. Decoupling values and regulator selection must be checked against the device electrical-characteristics tables rather than inferred from the headline operating frequency. Estimate total rail dissipation from actual core and I/O utilization because an FPGAs dynamic power can vary substantially with clocking, routing, and logic activity.
Calculate worst-case junction temperature from ambient temperature, package dissipation, and the board's actual copper and airflow conditions. The listed operating range reaches +100 °C at the junction, so industrial equipment needs thermal headroom below that limit. Avoid placing the FPGA beside high-temperature regulators or power devices without a calculated thermal margin. Use exposed PCB copper and, where required, a thermal interface or heat spreader, then validate the assembled enclosure under maximum expected logic activity.
Assign I/O standards based on voltage, slew rate, drive strength, and receiver topology rather than treating all 156 user I/O as interchangeable. Match trace lengths where the interface requires source-synchronous timing, use reference planes for high-speed routes, and account for connector or package parasitics in simulation. Keep clocks away from switching outputs, provide controlled impedance for external interfaces, and constrain unused I/O as directed by the manufacturer. Configuration pins should receive special review because startup behavior is board-critical.
زانیاری پابەندبوون
The EP3C25F256I7 listing identifies a lead-free package marking. RoHS, REACH, halogen-free, and conflict-minerals status are not established by the cited product information and therefore remain unknown.